OPERATING PROCEDURES
4.5
Crane Travel Operation
4.5.1
Active Restraints
TMS900E
Seat Belts
Before fastening a seat belt, always adjust the driver’s seat to the position in which you will drive For greater restraint and comfort: 1.
Be sure the belt is snugly fitted around the hips - not the waist - and not twisted. Failure to properly fit belts may result in unnecessary injury in the event of a collision.
2.
Only one person should be strapped in each seat belt.
To lengthen the belt, tip the buckle end downward, as shown, and pull the buckle until the belt ends can be joined. Insert the belt into the open end of the buckle until a snap is heard and check for latch engagement. This belt can be shortened, after connection, by pulling on the loose end until the belt is snug. Press the buckle release to remove the belt.
4656-2
4-6
