12. Description of Control Devices (5) Travel levers and pedals The travel levers and pedals control the traveling of the machine.
• If the blade is in the reverse direction, the travel levers and pedals should also be operated in reverse for forward and backward travel. • When operating the travel levers and pedals, you must check to see if the blade is in the normal position or in the reverse position. Note that the blade is in the normal position when the sprocket is in the rear.
Blade 000340-00E
Forward
Right N
Left
N Reverse
Refer to Section "11-1. Overview of the machine". When the blade is in the normal position: Forward : Push the travel levers forward. Step on the front of the pedals. Reverse : Pull the travel levers backward. Step on the rear of the pedals. N : Neutral...The machine stops.
000341-00E
Forward
Front
Rear 009233-00E
Reverse
(6) Accelerator lever The accelerator lever controls the engine speed (output). (A) Idling : Push the lever forward fully. (B) Run : Pull the lever backward fully. (7) Blade lever Use this lever to control the blade.
Front
Rear 009234-00E
(B)
(A)
IMPORTANT The blade lever is not locked by setting the lock lever to the lock position. Do not touch the blade lever when not operating the blade. (A) : Down : Push the lever forward. (B) : Up : Pull the lever backward. N : Neutral...When released, the lever will return to the neutral position and the blade is held as it is. 2-12
009004-00X
N
(B)
(A)
009005-00X
