Description of Control Devices

 Opening and closing the lower windshield

Open and close the lower windshield after housing the upper windshield.

1)Hold the lower windshield with both hands to lift it up.

2)Put the lower windshield in the storage area on the rear left of the cabin.

3)Lock the lower windshield securely by pressing it against the window locks (D).

4)Push the upper side of each window lock (D) to remove the windshield put in storage.

12-8. Operator’s seat

•Be sure to adjust the seat slide to obtain the best operating position whenever you start operation or a new operator begins to operate the machine.

•Do not place any objects within the moving area of the operator’s seat.

•Do not adjust the operator’s seat while operating the machine.

Adjust the seat so that the operator can easily operate the control levers in good posture.

 Seat position control adjustment (forward and backward)

Pull the slide lever (A) under the seat upward to slide the seat forward or backward.

The adjustable amount of the seat for forward and backward sliding is 2.95 in. (75 mm)

And the seat can be adjusted at any of the five levels within 2.95 in. (75 mm)

 Weight adjustment (Except air conditioner spec. type)

1)The seat can be adjusted for the operator’s weight by turning the weight adjuster lever (B) with the seat empty.

The setting weight can be read at the indicator (C).

2)Turn the weight adjuster lever (B) clockwise the setting weight is increased.

3)Turn the weight adjuster lever (B) counterclockwise, the setting weight is decreased.

12-9. Ash tray (for cabin)

Do not place any combustible matter in the ash tray.

Open the ash tray by pulling the lid to use it. Be sure to close the ash tray lid when it is not in use. To empty and clean the ash tray, lift it up by holding both ends.

12-10. Headlight

The headlight gets hot when it is turned on. Do not touch it carelessly with your bare hand to prevent burns.