29. Handling Air Conditioner (for Cabin) 5) Adjust the air direction with the air outlet grille. Air direction
• Set the fan switch for ventilation to apply preload to the inside of the cabin when the air conditioner is not used, so that no dust can come into the cabin easily during operation.
Knob
Close
Open
Grille 016147-00E
IMPORTANT Be sure to turn the air conditioner ON after starting the engine to prevent excessive force to the compressor etc. 29-2-2. Heating 1) Set the fan switch at any of the three positions (Low, Medium or High).
Temperature control lever
2) Set the temperature control lever at the WARM position (the left position). 3) Turn the air conditioner switch OFF. (The lamp goes off.) 29-2-3. Heating for dehumidification (In the case that the window glass tends to get fogged in rainy weather in spring or autumn.) With the heating turned on, turn the air conditioner switch ON (the lamp goes on). • If the temperature inside the cabin is low, dehumidification might not work because the compressor does not operate even if the air conditioner switch is turned ON. 29-2-4. Stop 1) Turn the air conditioner switch OFF. (The lamp goes off.) 2) Turn the fan switch OFF. • The air conditioner also stops only by turning the fan switch OFF.
5-8
Fan switch Air conditioner switch ON (The lamp goes on.) 001307-00E
