CHAPTER 3
Remove Dealer’s File Copy at Perforation
CHECKLISTS PRE-DELIVERY
DELIVERY CHECKLIST
After the Disc Conditioner has been completely set-up, the following inspections MUST be made before delivering it to the Customer. Check off each item after prescribed action is taken.
The following Checklist is an important reminder of valuable information that MUST be passed on to the Customer at the time the unit is delivered. Check off each item as you explain it to the Customer.
Check that:
the Customer his Operator’s Manual. Instruct him to o Give be sure to read and completely understand its contents
o grease fittings have been properly lubricated and that o All the Gearbox, Cutterbar and Roller Chain Sump have been Disc Conditioner has been completely and properly set-up according to details in this manual.
BEFORE attempting to operate his unit. and review all the SAFETY information with the o Explain Customer.
filled to their proper operating levels. See the Lubrication Chapter. All Guards, Shields and Decals are in place and securely attached. All fasteners are properly secured.
to the Customer that regular lubrication is o Explain required for continued proper operation and long life.
o o adjustments have been made to comply with settings o All given in the Adjustments Chapter. are properly mounted and inflated to 18 PSIG (126 o Tires kPa) on left side and 36 PSIG (252 kPa) on the right side. the Model and Serial Numbers of this unit on this o Record page and page 2.
Review the Lubrication information in this manual with the Customer, emphasizing that the oil in the Cutterbar and the Gearbox MUST be changed after the first 10 hours of operation. to the Customer the function of the Overrunning o Explain and Slip Clutch on the Gearbox input. to the Customer that unit components may o Explain continue to rotate after the tractor PTO is disengaged & that the customer MUST wait for all movement to stop BEFORE approaching the unit.
Hook the Disc Conditioner up to the appropriate 540 or 1000 RPM tractor and test-run the unit while checking that proper operation is exhibited by all components.
the function and use of the Transport Locks for o Explain the Header Lift and Hydraulic Drawbar Positioner to the Customer.
Check that:
the proper use of the Locking Couplers on o Demonstrate both ends of the Telescoping PTO Drive to the Customer.
o All Blades, Discs and Rollers are turning freely. o All Mechanisms are operating smoothly. Hydraulic Hose connections are NOT leaking under o The pressure and that lift mechanism is operating smoothly
fill out Owner’s registration, including o Completely Customer’s signature, and return it to the company.
and properly.
I acknowledge that the above points were reviewed with me at the time of delivery.
I acknowledge that pre-delivery service was performed on this unit as outlined above. Dealership’s Name
Customer’s Signature
Dealer Representative’s Name
Date Delivered
Date Checklist Filled out Model Number
Printed in U.S.A.
(Dealer’s File Copy)
Serial Number
5
907089/AP0994
