ISO-Style (used Internationally) Safety Decals inside the ROPS/FOPS Safety alert: Always follow “Mandatory Safety Shutdown Procedure” in Operator’s Manual. 1 – Lower equipment to ground. 2 – Reduce throttle, stop engine. 3 – Apply parking brake; remove key. 4 – Check safety interlocks.
137842 – Located on manual storage box Safety alert: Read Operator’s Manual and all safety signs before using machine. The owner is responsible to ensure all users are instructed on safe use and maintenance.
137847 – Part of left instrument panel Safety alert: A – Check machine before operating; Service per Operator’s Manual. Contact dealer (or manufacturer) for information and service parts. A B B – Maintain 3-point contact during entry and exit. C – Inspect work area. Avoid all C D hazards. Look in direction of travel. Keep children and bystanders away. D – Start and operate machine only F from seat. E E – Keep away from power lines; avoid contact. F – Wear any needed Personal 137849 – Part of Protective Equipment. Do not wear left instrument loose clothing while operating or panel servicing machine. A
B
C
D
137843 – Located on operator’s lower left side A – Crush hazard: Keep out from under lift arm unless lift arm is supported. B – Crush hazard: Keep hands, feet and body inside cab when operating. C – Forward tip hazard: Fasten seat belt. Carry load low. Do not exceed Rated Operating Load. D – Side tip hazard: Avoid steep slopes and high speed turns. Travel up and down slopes with heavy end uphill.
12
917388/G0521
