3 - GENERAL INFORMATION
3 - GENERAL INFORMATION###_1_### Basic instructions PLEASE READ THE COMPLETE INSTRUCTIONS BEFORE STARTING ASSEMBLY!
References to right-hand and left-hand are determined by standing at the rear of the machine and facing the direction of travel.
NOTE: When referring to the instructions for callout references, the numeric (example: (1)) refers to item (1) in the kit contents bill of materials. The letter (example: (A)) refers to the component on the unit, not a component in the kit contents bill of materials. NOTICE: Do not tighten the hardware until instructed to in the assembly instructions.
NOTICE: Be sure to use the hardware specified when using tapped holes as trying to install a metric bolt in an inch thread or an inch bolt in a metric thread will damage the threads.
NOTE: Install flat washers over all slotted holes unless truss-head or carriage bolts are used. Install a lock washer on all bolts unless a jam nut or self-locking nut is specified.
NOTE: Install special hardened washers where specified.
6 EN
