Straight connector 2

3 - GENERAL INFORMA TION ###_1_###

Basic instructions

PLEASE READ THE COMPLETE INSTRUCTIONS BEFORE ARTING ASSEMBL

References right - hand and left - hand are determined standing the rear the machine and facing the direction travel.

NOTE: When referring the instructions for callout references, the numeric (example: (1) ) refers item (1) in the kit contents bill materials. The letter (example: (A) ) refers the component the unit, not a component in the kit contents bill materials. NOTICE: not tighten the hardware until instructed in the assembly instructions.

NOTICE: Be sure use the hardware specified when using tapped holes trying install a metric bolt in inch thread inch bolt in a metric thread will damage the threads.

NOTE: Install flat washers over all slotted holes unless truss - head carriage bolts are used. Install a lock washer all bolts unless a jam nut self - locking nut is specified.

NOTE: Install special hardened washers where specified.