3 - PRE-ASSEMBLY
3 - PRE-ASSEMBLY PREPARING FOR ASSEMBLY
Machine preparation DANGER Improper operation or service of this machine can result in an accident. Any unauthorized modifications made to this machine can have serious consequences. Consult an authorized dealer on changes, additions, or modifications that may be required for this machine. Do not make any unauthorized modifications. Failure to comply will result in death or serious injury. D0030A
WARNING Crushing hazard! Lower all components, attachments, or implements to the ground before leaving the cab. Failure to comply could result in death or serious injury. W0419A
WARNING Pressurized hydraulic fluid can penetrate the skin and cause severe injuries. Hydraulic fluid is under extreme pressure. Rest the bucket or attachment on the ground. Shut the engine off, turn the key on, and move the hydraulic control lever through all movements several times to relieve residual pressure in the system. Failure to comply could result in death or serious injury. W0161A
1. Attach a "DO NOT OPERATE" maintenance tag. Apply this tag to the two cab doors.
SP0043
1
2. Park the machine on a firm level ground. Lower all the working equipment to the ground. Apply parking brake and shut off engine. Move the hydraulic controls to release the pressure in the hydraulic system. Remove the ignition key. Refer to the chapter "Safety information" contained in the operator's manual
7 EN
