Main Table of Contents
Clean Battery Compartment Using baking soda and water solution, clean the walls and floor ofthe compartment. Rinse with clear water. Blow off the compartment walls and floor with an ak hose. Allow to air dry.
STANDARD COMPARTMENT
REPLACEMENT BATTERIES Caution should be exercised to use a battery properly sized to the dimensions of the battery compartment. Batteries too small can shift and cause damage to the truck or injury to the operator or bystanders. Only use batteries that comply with factory recommendations as to size and capacity.
Install Battery If the battery is uncovered, cover the battery with a non-conducting rmterial (ie.,plywood, heavy cardboard, etc.) prior to attaching lifting device. Using an overhead hoist and an insulated spreader bar (see page 3), attach the safety hooks to the lifting eyes of the battery. Lower battery into compartment. Disconnect lifting device. Models so equipped: Install battery retainer plate. Connect truck battery.
12-l-6
l
Battery
SM 643, May ‘99
