1 minute read
LIFT CYLINDERS
Clean Battery Compartment
Using baking soda and water solution, clean the walls and floor ofthe compartment. Rinse with clear water. Blow off the compartment walls and floor with an ak hose. Allow to air dry.
REPLACEMENT BATTERIES Caution should be exercised to use a battery properly sized to the dimensions of the battery compartment. Batteries too small can shift and cause damage to the truck or injury to the operator or bystanders.
Only use batteries that comply with fac- tory recommendations as to size and ca- pacity.
Install Battery
If the battery is uncovered, cover the battery with a non-conducting rmterial (ie.,plywood, heavy card- board, etc.) prior to attaching lifting device.
Using an overhead hoist and an insulated spreader bar (see page 3), attach the safety hooks to the lifting eyes of the battery. Lower battery into compartment. Disconnect lifting device. Models so equipped: Install battery retainer plate. Connect truck battery.
