INDUSTRIAL
TRUCK DIVISION
MARKETING TRAINING DEPT.
Check rear battery retainers for damage or missing bolts. Check that all bolts are tight.
Fig. 22183 Check front battery proper adjustment. retainer is secured on each side of the bolts are tight.
retainer for damage, and Check that front battery in position by two bolts truck. Check that all
Check to make sure that all holes and openings that could allow leakage from the battery compartment down into traction control and pump motor compartments are sealed with RTV-type silicone sealer (arrows). Fig. 22184 Check battery cover hinges, springs and rollers for damage, and security of mounting.
Fig. 22185
Fig. 14028
Page 24
Now, with the battery out of the truck, check BATTERY CABLES for fraying and damage. Clean off minor deposits of corrosion on the batterv. *
DO NOT SMOKE OR HAVE OPEN FLAMES OR SPARKS IN BATTERY CHARGING AREAS OR NEAR BATTERIES.AN EXPLOSION CAN RESULT AND CAUSE INJURY OR DEATH.
Copyrighted Material Intended for CLARK dealers only Do not sell or distribute
PM-510, REV FEB 84
