Toolbox

Checklist “Putting the machine into service”

After starting the engine and during operation, check and observe the following points:

“Parking” checklist

Checklist “Putting the machine into service” See page ✔ 1 Indicator lights for engine oil pressure and alternator gone out? 3-31 2 Braking effect sufficient? 3-44 3 Temperature gauge for engine coolant in normal range? 3-6 4 Steering system working properly? 3-40 5 Anyone dangerously close to the machine? – 6 Safe load indicator checked and OK? 3-56 7 3rd control circuit locked and secured? 3-60

When driving on public roads, particular attention should be paid to the following points:

8 Telescopic boom completely retracted?

3-61

9 Bucket and attachments in transport position? 10 Transport guards (front-edge protection) put in place? – 11 Control lever for lift and tilt hydraulics of the telescopic boom locked? 3-60

Check and observe the following points when parking the machine:

Parking checklist See page ✔ 1 Attachments on the telescopic boom lowered to the ground? 3-61 2 Parking brake applied? 3-45 3 Diesel engine stopped? 3-31 4 Cab locked, especially if the machine cannot be supervised? –

When parking on public roads:

5 Machine adequately secured? –

When parking on slopes:

6 Machine additionally secured with chocks under the wheels to prevent it from rolling away?