Operation Direct input of calibration factor The menu item “Cal. factor” allows direct modification of the calibration factor. NOTE! For maximum yield measurement accuracy, we recommend using the litre weight for correcting changing crop conditions instead of the calibration factor – see Entering the litre weight, page 5.24. 28 – Turn incremental sensor (7) until “Cal. factor” is framed. – Press incremental sensor (7) in order to change the calibration factor. – Turn incremental sensor (7) until the desired calibration factor is displayed. – Press incremental sensor (7) in order to accept the calibration factor. NOTE! Manual changes of the calibration factor influence the calaulation of the yield data immediately and without retroactive effect. (Fig. 1, 28)
0299 268.2 - ABA/BA Quantimeter
5.27
