Weighed ............................................................................5

26

27 Weighed To ensure exact yield measurement, correct the weight measured by the yield meter by the actual weight determined by weighing.

NOTE!

The correction of the weight measured by the yield meter is valid with retroactive effect from the start of the work record. ñ The following data are newly calculated: ñDaily and total working hours counter, ñYield data of the started work record in the harvest display and work records menu.

Entering the weight determined by test weighing: ñTurn incremental sensor (7) until ìWeighedî is framed. ñPress incremental sensor (7) in order to change the weighed weight. ñTurn incremental sensor (7) until the correct weight determined by weighing is displayed. ñPress incremental sensor (7) in order to accept the displayed weight. The display shows the calibration factor determined by the yield meter. The following appears behind the test weighing menu item: ìcorrectedî. (Fig.1,26,27)