General information Identification of warning and danger signs
Correct use of the machine
All parts of these instructions having to do with your safety or the safe operating of the machine are marked with the following signs. Please pass all safety instructions on to other users, too.
The use of spare parts, accessories and ancillary equipment that are not original CLAAS products and have not specifically been tested and approved by CLAAS, can change the specified design characteristics of the CLAAS harvester or detract from its functional performance, with a possible adverse effect on the active and/or passive operational safety and on its occupational safety standards (accident prevention).
DANGER! Sign to indicate instructions which must be observed. Failure to do so could cause danger to life and limb to the operator and the people around him. – Preventive measures
CLAAS will not be held liable for any damage or personal injury caused through the use of other than original or CLAAS approved parts, accessories and ancillary equipment.
ATTENTION! Sign to indicate instructions which must be observed. Failure to do so could result in damage to the machine. – Measures to prevent damage to the machine.
NOTE! Sign to indicate instructions for a more effective and economic use of the machine.
CAUTION! Sign to indicate instructions which must be observed on assembly / disassembly.
ENVIRONMENT! Sign to indicate instructions which must be observed in order to avoid damage to the environment. Danger to the environment can be caused by the irregular handling and incorrect disposal of toxic material (e.g. used oil). The warning and instruction signs placed on the machine provide important recommendations for safe operating. These instructions involve your safety – observe them at all times!
3.2
UA Reisdrusch DO 218 - 202 MEGA - 298 977.0
