EM028802 OMM 6030AC, 6030ACFS(3 847 030.00)-EN
INSPECTION AND SERVICING No. Greasing point
Number
1
Central lubricating system – grease container
1
3
Electric motor
2
6
Monitoring, warning and control elements
Lubricant properties
Grease every .... operating hours 10
V 10
1000 (refer also to the electric motors type plate)
V 10
1000
11
- Joystick
2x4
- Pedal
3 x 2 11
1000
All other greasing points are supplied with grease by the central lubricating system.
Filling quantities – Grease Greasing point
Central lubricating system – grease container (depends on the type of container built in) Internal gearing – Roller-bearing slewing ring
Lubricant properties
V 10
Idler (permanent grease filling) Track rollers (permanent grease filling only when not connected to the central lubrication system) Support rollers (permanent grease filling)
10
cf. "LUBRICANTS" section
11
apply a thin layer of low temperature grease
Tribol CGM HMS GmbH part no. 2764564
Filling quant. in kg lb
appr. 180 – 500 appr. 150
appr. 397 – 1102 appr. 331
2 x appr. 4.5
2 x appr. 10
14 x appr. 14
14 x appr. 31
4 x appr. 1.3
4 x appr. 2.9
3-27
