Generalities

To operate the machine correctly means to prolong its working life. Adhere to instructions to inspect and correctly service the machine supplied in this Manual.

Check the machine every day before commencing the work:

• Check controls and instruments.

• Check oil, fuel, and coolant levels (with the machine parked on level ground).

• Check pipes and hoses for possible fluid leaks, kinking, fraying or damages.

• Visually inspect the machine outside considering its condition, noises if any or excess heat release.

• Check for loose or detached parts.

If the machine exhibits any fault, repair before starting the machine or contact your Dealer.

F1441

IMPORTANT:

• Use only recommended fluids and lubricants (refer to FLUID AND LUBRICANT FILLING

CHART on page 201). • Use only genuine CASE spare parts. •Using fuel, lubricants, fluids or spare parts other than the recommended ones will immediately invalidate the warranty. •Never change the fuel injection pump governor setting or the hydraulic system safety valve setting. Lead seals can be removed solely by authorised personnel, otherwise the

Manufacturer rejects any responsibility as regards the guarantee. •Always keep protected electrical parts from water and dampness. •Never remove electrical components such as the main electronic central unit, sensors, etc. as they may be irreversibly damaged.

27401 6-30060 GB