Bucket A linkage

When the machine has stop for any reason, always check that all controls are in the neutral position and that the safety lever is in the locked position, thus ensuring there is risk when work is restarted. Put the switches in the f position. T urn the ignition key OFF . Never leave the machine unattended with the engine running. Before leaving the operator seat and after making sure that all people are away from the machine, slowly lower the attachment position it safely the ground. Retract any auxiliary tools a safe position. Align the upper structure tracks in order allow the entry exit from the operator cab. Move all controls the position specified for stopping the machine. Move the machine away from pits, ditches, walls, rocks, locations with overhead electric lines. Park the machine firm level ground. this is not possible, position the machine perpendicular the slope the terrain, making sure there is danger unexpected movement. Park the machine in area outside the work site and without traf fic. that is not possible, provide appropriate flags, barriers, lighting and other appropriate signals, required, properly warn drivers traveling through the location. Always turn f the ignition key before cleaning, repair , when parking the machine, thus preventing any accidental movement travel. Never activate the attachment auxiliary tools without being seated in the operator's seat. Use the horn warn other people. Make sure that one is in the radius action the machine.

MAINTENANCE

Carefully read the Operation and Maintenance Manual before starting, operating, performing maintenance, fueling, repairing the machine in any way . See all safety decals placed the machine. Observe and follow the instructions they contain. not allow unauthorized personnel repair perform maintenance tasks the machine. Follow all recommended maintenance and service procedures. not wear rings, wrist watches, jewellery , loose hanging garments, such ties, torn clothing, scarves, unbuttoned unzipped jackets that can get caught movements rotating components. Use certified safety equipment such as: hard hat, - slip footwear , heavy gloves, ear protection, safety glasses, reflector vests, respirators when required. Ask your employer about the protection and safety regulations. not use the control levers hydraulic hoses supports. The hydraulic hoses and control levers are movable parts and not provide solid support. addition, control levers may inadvertently moved and cause unexpected movement the machine its attachments. not jump f the machine. Always keep both hands and one foot, both feet and one hand, in contact with the steps and handrails. Always use three points support when entering exiting the machine. Never perform maintenance with someone sitting in the operator ’s seat, unless this person is authorized operator assisting in the maintenance being carried out. Always keep the operator ’s compartment, steps, handrails and control handles clean and clear foreign objects, oil, grease, mud snow reduce the risk slipping stumbling. Remove mud grease from your shoes before entering the cab operate the machine. Keep the operator ’s seat free foreign objects, especially if they are not secured. Should it necessary move the attachment perform a maintenance task, not raise lower it from any other position than sitting in the operator ’s seat. Sound the horn and require that one remain near the machine. Raise the attachment slowly . Always lock all moving components parts the machine that should lifted for maintenance purposes using adequate external lifting equipment required local regulations. not allow anyone pass, remain near below a raised attachment. not put your head, body , limbs, hands, feet, fingers near the articulating cutting edges without the necessary protection, unless they are properly and securely locked. Never lubricate, repair make adjustments the machine with the engine running, except when this is absolutely based the task performed. When the maintenance performed requires access areas that cannot reached from the ground, use a ladder scaf folding. a ladder scaf folding are not available, use the machine handrails and steps. Perform any maintenance work with the greatest care and attention. W orkshop maintenance field scaf folding should manufactured and maintained in accordance with the safety regulations. Disconnect the batteries and put a "Do Not Operate" tag the controls warn maintenance work is in progress. not check fill the fuel reservoir install batteries near burning smoking materials open flames due the presence flammable vapors. The fuel filling pump nozzle must kept constantly in contact with the reservoir neck, even before the fuel starts flowing in. Keep this contact from the beginning the end the fuelling operation prevent possible generation sparks due static electricity .