Bucket Cylinder

During the movements, keep the bucket low possible all times. Drive the machine with the headlights and use appropriate signals and flags. Know and observe local regulations. Use a ramp load the machine onto a transport vehicle. Ramps should suf ficiently strong support the weight the machine. Load and unload the machine onto the transport vehicle always a level surface.

ENGINE

not leave the engine running in enclosed area without proper ventilation capable removing harmful gases. Keep hands away from the belts and fans. When topping the radiator coolant level, loosen the radiator cap slowly release the pressure. Remove the cover after making sure that there is more pressure. this operation only with the engine turned Prevent flammable materials from coming into contact with the exhaust system. not refuel the machine with the engine running, especially if it is hot. This procedure increases the risk fire in case fuel spillage.

not run the engine with the air inlets open without the air filter .

Engine startup not increase the engine speed shortly after turning it on, not damage the lubrication the turbocharger bearings.

Start the engine and let it run half the maximum rotation for 3 4 minutes before placing the machine in operation.

Stopping the engine

Before shutting down the engine, let it run for a few minutes idle speed allow for deceleration and stabilization the turbocharger a low speed and temperature. Never increase the engine speed before you shutting it down not damage the journals the turbocharger through lack lubrication. the engine is turned f suddenly high rotation, the turbocharger will continue rotate after the engine oil pressure lowers zero. Running high speed without oil, the journals the turbocharger will damaged in a matter seconds.