T rack shoe

2 - SAFETY INFORMA TION ###_2_###

Safety rules

GENERAL

Read the Operator's manual carefully before starting, op-

erating, fueling, performing maintenance services the machine. Carefully read the explanation for all the decals in the "Safety Decals" section. See page 2- in this manual. The safety decals placed the machine are color - coded yellow with black borders when they refer points where special A TTENTION must paid and failure observe them may cause a serious DANGER the physical integrity machine operators. is essential that all machine operators know the meaning each safety decal very well, since this considerably decreases the risk accidents during operation. not allow unauthorized personnel operate perform maintenance services this machine. not wear rings, wrist watches, jewellery , loose hanging garments, such ties, torn clothing, scarves, unbuttoned unzipped jackets that can get caught in moving parts. W ear certified safety equipment such as: hard hat, - slip footwear , heavy gloves, ear protection, protective goggles, reflector vests and respirators whenever necessary . Ask your employer about the safety regulations for the protective equipment. Always keep the operator ’s compartment, steps, handrails and control handles clean and clear foreign objects, oil, grease, mud snow reduce the risk slipping stumbling. Remove mud grease from your shoes before entering the cab operate the machine. not jump f the machine. Always keep both hands and one foot, both feet and one hand, in contact with the steps and handrails. Be careful about the possibility slipping the steps and handrails, well the ground around the machine. W ear protective boots shoes with the soles made highly - slip rubber . not use the control levers hydraulic hoses supports. The hydraulic hoses and control levers are movable parts and not provide solid support. addition, control levers may inadvertently moved and cause unexpected movement the machine its attachments. Never operate the machine its attachments from any position other than sitting in the operator ’s seat. Always keep your head, body , limbs, hands and feet inside the operator ’s compartment reduce exposure external hazards. not exit the operator's compartment the machine until it has come a complete stop and the engine is shut down. Check height, width and weight limitations which may encountered the work site and make sure the machine does not exceed them. Assess the exact location gas ducts, water lines, telephone lines, sewers, overhead and underground electric lines and all other possible obstacles. Such locations should defined competent authorities. necessary , require that maintenance interrupted said installations moved prior starting the work. Determine the swing area the rear the upper frame and provide for barriers in order limit access others. Never exceed machine lifting capacity . Remain within the limits shown in the load capacity table located the machine.

ARTING

Never start operate a machine with a defect. W alk around the machine and perform a visual inspection before climbing into the cab and starting the operation. Before starting the machine operation, avoid any possible dangerous condition. Check, adjust, and lock the operator's seat in the position for maximum riding comfort and complete accessibility the controls. Also make sure that one is in the radius action the machine implement. Sound the horn. Obey all hand signals, safety indications and signs. Before starting machine, check that the controls are in the neutral position and that the safety lever is in the control lock position. Notify those responsible for maintenance any malfunction in the systems components, obtain a proper corrective action. Due the presence flammable fluids, never check fuel level, refuel, charge the batteries in the presence materials with smoke, open flames sparks. Adjust all the rear - view mirrors for maximum visibility the area behind the machine. Ensure that engine speed is appropriate for the job carried out. any hydraulic control system exhibits erratic performance responds abnormally slowly , have the machine checked for air in the system. Air in the hydraulic circuits may cause unexpected movements that may result in accidents. Consult this manual for the proper corrective action taken.