OPERATING INSTRUCTIONS BEFORE STARTING THE ENGINE
!
CAUTION: Quickly respond to initial problems requiring maintenance and downtime will be reduced. Check the machine each morning before beginning work make a walk around inspection. 1. Check if the tires are worn, cut or not properly inflated. 2. Check if the blade, cutting edges and bits are worn or damaged. 3. Check circle adjustment. 4. Check for damaged or failed instruments and other operator’s compartment components. 5. Check leakage on tandem case. 6. Check any leakage or damage to cooling system hoses. 7. Check engine oil and hydraulic lines and hoses for leaks.
It’s also recommended to check Electrical system Check insulation parts, worn cables and terminals loose Bolts
Check for loose or missing parts
Hydraulic system Check leakages, twisted hoses, hoses rubbing against other components Lubrication
59
Check all grease points related on periodic maintenance table
