64
3550
MAINTENANCE TABLE EVERY 10 HOURS WORK (DAILY) 1 Engine oil: check oil level
EVERY 1000 HOURS WORK 21 Fuel filters: replace filters
2 Torque converter/transmission hydraulic circuit: check oil level
22 Bevel gear set/brakes: change oil and suction filter
3 Radiator: check coolant level
23 Torque converter/transmission hydraulic circuit: change oil 24 Propeller shaft: grease
EVERY 50 HOURS WORK 4 Equipment hydraulic system: check oil level 5 Fuel tank: draining condensation 6 Blade cylinder articulations: grease articulations 7 Ripper and front equipment linkages: grease linkages 8 Cab ventilation air filter: clean filter 9 Bevel gear set/brakes: check oil level
25 Batteries: check level of electrolyte 26 Final drives: change oil 27 Air cleaner: replace cartridges 28 Transmission/torque converter suction filter: clean filter 29 Transmission/torque converter breather: replace 30 Bevel gear set/brakes breather: replace 31 Fuel injectors-engine valves: check calibra- tion of injectors 32 verificare la taratura degli iniettori 33 Engine breather: clean
EVERY 250 HOURS WORK 10 Final drives: check oil level 11 Engine oil: change oil (1) 12 Idler: lubricate 13 Fan-alternator-water pump: check conditions and sagging of belt
EVERY 2000 HOURS WORK 34 Equipment hydraulic circuit: change oil
14 Track frame pivot shaft: grease articulations 15 Cab ventilation air filter: replace filter AS REQUIRED 35 Engine air cleaner clogged: clean cartridges EVERY 500 HOURS WORK 16 Engine oil filter: replace filtering cartridge (1) 17 Bevel gear set/brakes return filter: replace filtering cartridge
36 Oil filter on equipment hydraulic circuit return: replace filtering cartridge 37 Fuel filters: draining condensation
18 Transmission/torque converter delivery filter: replace filtering cartridge 19 Oil filter on hydraulic circuit return: replace filtering cartridge 20 Engine coolant filter: replace filtering cartridge
OTHER OPERATIONS TO BE PERFORMED AS REQUIRED 38 Undercarriage: checking the sagging of the track chains
(1) These service intervals must be performed at 100 hours if the sulphur content exceeds 0.5%.
Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
