Bomag Single drum roller BW 213 D-4 Operating instructions Manual

Page 132

Trouble shooting

6.3

Engine problems

Fault

Possible cause

Remedy

Engine does not start or starts poorly

Temperature below starting limit

Check

Oil level too low

Fill up lubrication oil

Lubrication oil level too high

Check the lubrication oil level, drain off if necessary

Lubrication oil cooler defective

Check Exhaust gas counter pressure too high

Check

V-belt/ribbed V-belt (fuel pump in belt drive)

check, whether torn or loose

Engine oil with wrong SAE viscosity class

Change the lubrication oil

Fuel quality not as specified in the operating instructions

Change the fuel

Air in the fuel system

Bleed the fuel system

Battery defective or not charged

Check the battery

Cable to starter loose or oxidized

Check cable connection

Starter defective or pinion does not engage

Check starter

Engine does not start and diagnostic lamp flashing

Engine electronics prevent starting

Check fault by fault code, repair as necessary

Engine starts, but runs irregularly or misfires

V-belt/ribbed V-belt (fuel pump in belt drive)

check, whether torn or loose

Incorrect valve clearance

Adjust

Injector defective

Replace

Injection valve defective

Check / replace the injection valve

Glow plug defective

Replace

Air in the fuel system

Bleed the fuel system

Fuel pre-cleaner soiled

Clean/replace

Fuel quality not as specified in the operating instructions

Change the fuel

Injection line leaking

Check the injection line

132

BOMAG

BW 213 D-4


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.