6.
Remove the three screws at the top of the keyboard.
7.
Lift up the keyboard and hold it up and slightly forward to allow access to the keyboard connector.
8.
Pull up on the keyboard connector pull-tab to disconnect the keyboard connector from the system board.
Disassemble the Cables, Antenna and LCD Module
60
1.
Disconnect the touchpad cable and CD-Player cable.
2.
Disconnect the wire cable from the board.
3.
Disconnect the Antenna cable.
4.
Tear the tape then pull the antenna cables from the routing channels.
5.
Loosen the two screws on each side as shown here.
Chapter 3
