Steering/Body/Controls The following steering components should be inspected periodically to ensure safe and proper operation: A. Steering wheel secure. B. Steering has equal and complete full-left and full-right turning capability. C. Steering sector mounting bolts tight. D. Ball joints not worn, cracked, or damaged. E. Tie rods not bent or cracked. F. Knuckles not worn, cracked, or damaged. G. Cotter pins not damaged or missing. H. Steering wheel tilt locks securely. The frame and welds should be checked periodically for damage, bends, cracks, deterioration, broken components, and missing components.
Hood/Rear Cargo Tray/Grille
VOR-474
2. Remove rear cargo tray by lifting vertically. 3. Rear cargo tray is directional. Install the rear cargo tray. 4. Secure with fasteners by turning clockwise. Tighten fasteners securely REMOVING GRILLE
1. Remove hood. 2. Remove fasteners securing lower fascia. Remove lower fascia.
REMOVING/INSTALLING HOOD
1. Turn the two 1/4-turn fasteners counterclockwise and remove hood.
VOR-472
3. Remove the fasteners securing the grille.
VOR-471
2. Insert the tabs on the rear of hood into the rear portion of the front body panels. Lay the hood down flat. Turn both of the fasteners clockwise securing the hood. REMOVING/INSTALLING REAR CARGO TRAY
1. Remove fasteners from the rear cargo tray by turning counterclockwise VOR-473
4. Remove grille by slightly lifting fenders while carefully sliding grille downward.
17
