PRESERVATION PRODUCTS

Preservation Equipment

Cimline Pavement Maintenance Group C1 Mastic Machine

A specialty piece of equipment that's a combination crack seal and mastic patch machine, designed to heat 24,000-lb of material in an 8-hour shift.

• Heats on demand in just 40-minutes and keeps the material in working condition all day

• Design of the C1 separates the aggregate from the patching material, de-linking it from the binder which enables contractors and municipalities to use locally sourced aggregate, which can then be added separately to the patent-pending mixing chamber

• Powered by a 19-hp diesel engine, C1 is designed for ease of use

Robotic Maintenance Vehicle (RMV) Crack Sealer

Neal Mfg Asphalt Road Preservation Package

Includes the drivable DA 350 dual applicator for quick prep work and sealcoating around curbs and gutters, and its High-Volume Road Maintenance Vehicle that delivers high material output for efficiency on large projects.

• DA 350 is a three-wheeled, selfpropelled machine with a built-in, high-powered blower and AutoTrim cutting-in attachment

• High-volume Road Maintenance Vehicle features Neal's Generation IV pump that delivers infinitely variable outputs from 0-150 gpm

• Cover up to 14 feet wide at 150 gpm

• Generation IV pump allows operators to transfer 3,000 gallons of material from storage tanks in 20 minutes

Etnyre Maintenance Asphalt Distributors

Optimize your speed and accuracy of single application and resealing liquid asphalt applications with Etnyre’s Maintenance Distributors.

• 600-gal to 1,000-gal capacities

• Trailer, truck or skid mounted

• One person operations - all spraying functions can be controlled from the truck cab

• Meets federal regulations for hot products

• Hydraulic drive system

Soft Heat SH-AR55 Asphalt Reclaimer

The RMV is a full truck chassis equipped with a FANUC R2000 robot attached, Stateline Generator, Integrated Blow-Off System, AI Vision Software.

• Safety – removes workers from harm's way and not exposed to traffic

• Faster – runs at a consistent speed with FANUC R2000 Robot

• Quality – equipped with controls parameters and making precise decisions. Measuring cracks and controlling material flow for each specific crack

• Labor – only requires one operator, which reduces the requirement of filling labor shortages. The truck also works at night.

Etnyre BIG ChipSpreader

The variable width hopper hydraulically extends and retracts while spreading to cover the entire road and shoulder in one pass. Width is adjusted with a switch. Controls are located at both the driver’s seat and in a mobile control panel located at the right front station. Two independent spread hoppers. Width is variable on the left side, right side, or both sides at once. The hoppers retract with the flip of a switch. Ready for transport only seconds after finishing a job. No need to empty hoppers or remove parts. Variable Width spread hopper.

• 4 wheel drive, 10 HP Cummins QSB

• 30” conveyor belts, 5” gate openings

The SH-AR55 "Cookie Box" portable asphalt reclaimer with heated storage capability is designed to reheat virgin or recycled asphalt products to working temperature in minutes.

• Cold asphalt products in chunks or pre-made cookie forms are placed inside the box on a grating

• Up to 200 lbs. of heated material falls through the grating within seven to 10 minutes and into the heated holding area

• Upper and lower burners can be fired simultaneously or independently as needed using propane gas

• Features the striker, high-volume regulator, 10-ft. hoses, 50,000-btu burner/lighting wand and self-storing handles

• Uses 14-gauge steel throughout with a heavy barred grating suspended inside the heating chamber