JOBSITE PRODUCTS

Quality Control

TransTech PQI 380

Carbolite BA 7/35B Asphalt Binder Analyzer

Simplifies and automates calculation of the asphalt binder content of hot mix asphalts (HMAs) used for in road surfacing.

• Optimized for standard compliant tests to BS EN 12697-39-2004, ASTM 6307-10 and AASHTO T308-10

• Intuitive touch screen interface is easy to use even when wearing gloves

• Test recipes are easily stored, recalled and transferred between furnaces

• Provides automatic collection of weights and correction factors

GSSI PaveScan RDM 2.0

Can be used to uncover problems that occur during the paving process, including poor uniformity and significant variations in density, to help avoid premature failures such as road raveling, cracking and deterioration along joints.

• Sensor design built specifically for the extremes of the asphalt paving environment

• Foldable deployment arms with high-visibility for work site safety

• Warm-up time of under one minute when ambient temperature is over 70° F

Topcon Thermal Mapping System for Asphalt Paving

Monitors temperature segregation and easily provides accurate compliance reporting, with real-time kinematic (RTK) positioning accuracy.

• Provides a visualization to operators in real time of whether the mix falls within a pre-defined temperature range

• Quickly tells operators if mix is stable or if moderate or severe temperature variation is occurring

PAVELAB50 Automatic ClosedSystem Asphalt Analyzer

The PAVELAB50 Automatic ClosedSystem Asphalt Analyzer is designed to separate bitumen, filler and aggregates from asphalt mixtures by closed-system solvent extraction.

• Fully compliant with the new ASTM D8159-2018 and EN 12697-1

• Safe, quick, environmentally friendly and accurate with high repeatability

PaveScan Mix Design Module

Sensitive to subtle changes in aggregate, mix and moisture, comparing daily samples against approved mix designs makes any deviations apparent and helps to fix any problems before the mix is deployed.

• With one five-minute lab test, users can accurately reveal problems before any need for silo dumps

• Turns system into a powerful new QCtool for asphalt density assessment

• PaveScan MDM creates a correlation between the dielectric value of the mix at different percent voids

Precise pavement density measurement almost instantly (3 seconds) without the hassle of nuclear regulatory training and certification.

• Full color VGA display

• LED backlight for easy visibility in light or dark situations

• Customizable project and mix entries

• Data management screen with the ability view, print or download data via USB drive

• Fast, reliable, accurate and repeatable readings in real time

• No badges, licenses or storage and transport concerns

• Conforms to ASTM D7113 and AASHTO T 343-12

Thermal Mapping for Caterpillar Asphalt Pavers

Thermal Mapping monitors the surface temperatures of the asphalt utilizing an infra-red camera and a Global Navigation Satellite System (GNSS) enabled by RTK accuracy helping asphalt contractors achieve higher quality results and earn more incentive pay by exceeding quality targets.

• Viewing real-time temperatures, contractors can identify variations and take action to manage the plant to paver delivery process and fine-tune paving practices for more uniform lay-down temperatures

• Manage the plant to paver mix delivery process in order to minimize thermal variation for up to 15% better consistency

• System consists of no moving parts as the thermal camera mounts on a fixed position mast