4 minute read

PRESERVATION PRODUCTS

Next Article
JOBSITE PRODUCTS

JOBSITE PRODUCTS

Milling Machines

Sponsored By

Wirtgen W 250i Cold Milling Machine

The W 250i includes an extra-large milling drum unit that enables up to a 12-ft. 6-in. working width and a 14-in. milling depth.

• Features the intelligent WIDRIVE machine management system, a Dual Engine Concept, PTS (Parallel To Surface) system and intelligent speed control (ISC)

• Three selectable milling drum speeds of 1,600, 1,800 and 2,00 rpm

• FCS Light quick-change system allows various milling operations to be carried out using different drums

• Multifunctional control display and LEVEL PRO control panel

CMI RM-6 RotoMill Cold Planer

The modular design RM-6 Roto-Mill features a 75-in. cutting width at up to a 13-in. depth.

Roadtec RX-900e Cold Planer

Roadtec RX-900 cold planer is available with an 950-hp diesel engine.

• Three- or four-track assemblies

• Cuts 14 in. deep and from 7 ft. 2 in. to 12 ft. 6 in. wide

• 42-in. front load-out conveyor

• Hydrostatic drive for propulsion and conveyor system

• Working speeds up to 128 fpm

• Proportional joystick controlled steering with coordinated, crab, front only and rear only modes

BOMAG BM1200/35 Cold Mill

The BM1200/35 cold milling machine offers a 47.2-in. cutting width and 13-in. maximum cutting depth and features a rear rotor design that optimizes milling performance.

• Cutter design with the BMS 15 interchangeable holder system incorporates a single bolt for holder retention and requires a low tightening torque of 75 ft.-lbs.

• 349-hp MTU Tier 4 Final diesel engine offers power to efficiently mill asphalt at speeds reaching 105 fpm

Caterpillar PM825 Cold Planer

The PM820, PM822 and PM825 have operating weights from 79,630 to 82,650 lbs. and cutting widths from 79 to 98.6 in.

• Three electronically controlled cutting settings to match rotor speed/torque with operating conditions

• 755-hp Cat C18 ACERT Tier 4 Final engines iso-mounted to reduce vibration

• Hydrostatic drive with two variable-displacement propel pumps supplying a variable-displacement motor at each track

• Automatic traction control system minimizes track slip in extreme conditions

• Standard four-mode steering with electronic control module

• Hydraulically controlled front loading conveyor

• Cummins QSX 15 Tier 4 Final engine

• Touchscreen control system

• Large access doors for inspection, adjustment and repairs.

• High conveyor capacity means less tooth wear and better productivity

• Onboard diagnostics and manuals provide ease of maintenance and reduced downtime

SCM2000C-8W

Lightweight body and steady operating

Superb milling property

Reliable power matching design

Powerful conveying ability

Intelligent, convenient operating configuration

Convenient and simple maintenance

Maximum 330mm milling depth makes it to finish the milling on surface layer, structure layer and basic layer in one time

Big open aperture for the engine cover and radiator cover saves 50% time for maintenance and cleaning inside engine room

Sufficient storage rooms is convenient for storing spare parts and tools

Engine failure self-diagnosis, electrical components centralized, fuel and hydraulic oil filling at the same side

Sponsored By

Wirtgen W 380 CRi Cold Recycler

Wirtgen engineered the 380 CRi Cold Recycler to increase process efficiency, jobsite productivity, environmental sustainability and safety. It is designed to granulatwe the existing road and transform it into a new, homogeneous material mixture by adding binding agents such as cement, bitumen emulsion or foamed bitumen. The recycled material is fed to a paver via its swivel-mounted and heightadjustable discharge conveyor at the rear. Many new automated features enhance ease of operation, including the high-precision LEVEL PRO levelling system.

Roadtec RX-700 Cold Planer

The RX-700 heavy-duty cold planer offers balanced weight distribution and can cut up to 14 in. deep.

• Standard cut widths of 6 ft. 7 in., 7 ft. 2in., 8 ft. 2 in. and 10 ft.

• Features a 60° front load-out conveyor swing

• Dual control stations allow operation from either side

• Automated Control of Elevation (ACE) grade control automates machine elevation through grade and slope sensors

• Keyway steering with crab, coordinated, rear only and front only steering modes

• 800-hp Caterpillar C18 six-cylinder, Tier 4 Final diesel engine

BOMAG BM 1200/35-2 Milling Machine

The BM 1200/35-2 is powered by a 350-hp MTU engine that meets Tier 4 Final/Stage V standards. It is able to generate a 164-fpm maximum milling speed and has a 410-fpm transport speed. Three milling drum speeds (85, 95 and 107 rpm) help fine tune cutting speeds to jobsite conditions. The unit has a 47.2-in. cutting width and 13-in. maximum cutting depth. Material is efficiently moved from the cutter housing to trucks via inside and outside conveyors at a maximum discharge height of 224.4 in.ww

BOMAG BM 2500/75 Milling Machine

The BM 2500/75 half-lane mill offers a range of standard, fine, micro and power drum designs to meet a variety of milling needs.

• 771-hp diesel engine and mechanical drum drive

• 98.4-in wide cutter delivers cutting depths reaching 13.8 in.

• Three milling speeds include ECO (100 rpm), Universal (112 rpm) and Speed (131 rpm)

• 60° left/right swiveling outer conveyor offers up to a 16.4-ft. discharge height and transfers millings to either side of the machine at rates up to 285.3 fpm

• All-crawler steering and crab walk for optimal on-site maneuverability

Wirtgen W 240

CR/W 240 CRi Cold Recycler

The helical design of the W 240 CRi milling and mixing rotor transports mix to the center and then to the paving unit via the primary conveyor, where the spreading auger distributes it evenly in front of the variable paving screed to ensure paving is true to line and level.

• Suited for both the down-cut process (recycling) and up-cut process (milling)

• Hard-wearing HT22 quick-change toolholder system

• Multiple Cutting System MCS EXTEND enables different working widths

• Injection systems features adjustable injection pressure

Caterpillar Updated Cold Planers

The 630-hp PM620 and PM622 half-lane cold planers have a Cat C18 Tier 4 Final engine, while the PM820, PM822 and PM825 have the same engine with a twin-turbo setup to deliver 800.6 hp.

• Weigh from 73,260 to 82,650 lbs. with cutting widths from 79 to 98.6 in.

• Integrated Cat GRADE with Grade and Slope system or can be enhanced with full 3D milling operation

• Robust cutting system with heavy steel construction and reinforced alloys

• System K rotors available in a variety of spacings

• Kicker paddles reversible for extended life

SAKAI Road Planer and Stabilizer

The ER552F high-speed pneumatic tire road planer and PM550 road stabilizer offer easy access to the cutting teeth and toothholders for servicing and tool repairs and replacement.

• ER552F road planer features a motor grader-like bogey suspension system, 561-hp Tier III diesel engine and an 81-in.-wide cutter drum assembly that cuts to 9 in. deep in one pass

• Four-wheel-drive PM550 road stabilizer includes a high-torque, two-speed rotor, a 57-gpm top working speed and a 496-hp Komatsu six-cylinder Tier III diesel engine

• Optional auto-spray emulsion system

This article is from: