PRODUCTION PRODUCTS PLANT COMPONENTS

Meeker Equipment Rejuvenator Pump Skid

The Meeker Equipment Rejuvenator Pump

Skid has progressive cavity pumps which are positive displacement pumps.

• Mass flow meters provide accurate and repeatable flow rates. Density of liquid is automatically compensated so you get accurate data

CWMF Dust-Eater Baghouse

The Dust-Eater baghouse is offered in a portable or stationary configuration, ranging in size from 10,000 CFM to over 100,000 CFM

• 3/16-in. shell construction

• Inlet deflectors

• Side wall louvers

• 7-ft. x 10-ft. x 12-ft. inlet knockout box is equipped with a series of deflectors and louvers minimizes the amount of larger fines (+200 mesh) from entering the bag chamber. This allows the unit to collect the finer particulate for efficiency. It also aids in prolonged bag and component life.

• 2 ½-in. spacing between bags

Blue Smoke Control X-VOCS Odor Control

The Blue Smoke Control division of Butler-Justice Inc. created X-VOCS to help eradicate odor-causing emissions produced as a byproduct during hot-mix asphalt production.

• The X-VOCS System features proprietary carbon absorption technology designed to filter and remove up to 99% of odors and VOCsfrom tanks

• X-VOCS incorporates a five-stage filtration system. In the first three stages, a series of filters remove more than 95 percent of targeted particulates down to 0.3 microns. In the final two stages, carbon filtration beds remove remaining odors and volatiles

• Variable frequency drive allows operators to control VFD locally or remotely

• Electric control valve is pre-plumbed into skid. Operators can run rejuvenator to drum, divert it back to a tank or for calibration

• On the discharge side of the progressive cavity pump

Maxam ConVector Liquid Asphalt Heater / Agitator

Has a lower initial investment and significantly lower maintenance costs compared to conventional liquid asphalt tank heating/agitating systems.

• Siphon jet pump induces a high speed, high volume flow

• The ConVector comes as a complete unit and is easily installed

ALmix Split-Level, Portable Control House

Designed to provide a safe, refined, and fully mobile environment for your asphalt plant operators, plant automation systems, and load-out. 270-degree views, UL-Approved Motor Control Centers (MCC) complete with manual backups for each bucket, and rubberized flooring.

D&H Horizontal Mixing Chamber

An innovative solution to mixing asphalt, rubber, polymer, or any dry powder. It effectively inline blends both small batches to continuous large-scale production.

• Proven to handle heavily-modified asphalt blending production rates from 10TPH up to 60TPH+ of continuous use

• 85 gallon, single-chamber, heat-jacketed chamber

• Two mixing stages featuring a combination of flighting, breaker bars, and mixing paddles

• 200rpm single-speed electric motor and gearbox

• Heat-traced with 2” high-density insulation

• Backflow preventative device with overflow and dual-redundant high-level safety switches

ALmix Reverse Air Rotary Baghouse

The simple, reliable design efficiently handles both low and high volumes of dust, providing plant operators the ability to return dust/fines. Continuous duty means that the baghouse filter bags are cleaned in sequence, one set at a time without turning the unit off. The filter bags encompass a large filter area in a small compact housing thus keeping the air velocity through the bag to a very low level when compared to traditional pulse jet baghouses. Dryer velocities are held below 1,000 FPM.

Sponsored By