Automation INSIGHT! December 2018

December 2018 Vol.6 Issue 9

DMS ANALYTICS PETRONAS Redevelopment of Bokor Phase 3 Malaysia’s Jimah East Power Plant To Be Completed By The End of 2019

2nd ISA Malaysia Section Event 2018 Catalogue

FEATURED PROJECT PCSB - Kumang Cluster Development

POST SHOW REPORTS 1st ISA Thailand Section Event 2018 2nd ISA Analysis Division Singapore Symposium 2018

FIRST WORD

Automation INSIGHT! December 2018 Vol. 6 Issue 9 PUBLISHED BY Data Media Systems (for private distribution) President & CEO Mohammed Loch mloch@dmsglobal.net Operations Director Sara Loch sloch@dmsglobal.net Content Writer & Editor Rima Ravi rravindran@dmsglobal.net Editorial Designer Vishnu Raj vraj@dmsglobal.net Although all efforts to ensure accurate reporting are taken, some errors may occur. The views and opinions herein are not those of the Publishers. All Rights reserved.

Content Pages

3 4-5 6-10 11-50

First Word DMS Analytics Company News 2nd ISA Malaysia Section Event 2018 51-84 Post Show Reports 86-88 Digitalization 90-93 Featured Project 95 DMS CSR

Advertisers Index Pages

2 4 5 7 10 50 68 89 94 95 96

DMS Analytics TURCOMP GSN BHGE Yokogawa Emerson HIMA ARC Advisory Group DMS Projects Unicon Siemens

Dear DMS Members, Insurance is a weird thing. To be fair it’s more the risk assessment. Humans are notoriously poor at assessing the risk of failure or harm and thus sometimes purchase insurance and sometimes not.

Bicycle helmets or seat belts are a perfect example. Some assess the risk as minimal whilst others are far more cautious. Some take into account the fact that track-records prove that they are excess to requirement whilst others perceive risk due to the power of consensus.

Who is right?

Both are right since any assessment is about perceived risk but, surely using, even if proven otherwise, is the best approach to cover the unexpected, or not factored, upset? That is as long as the cost is not a limiting factor that is.

In a former job it amazed me how, just because lightning had never struck, the feeling was that it never would and so the plant was safe and would not suffer a shutdown due to a strike. The Middle East in particular would use this logic even though we experience lightning strikes every year and the insurance (a lightning/ surge protection device) would only cost a few hundred dollars or so and save a shutdown that could save hundreds of thousands of dollars of lost production.

A lightning strike could cause a shutdown system to shutdown when there was no danger to the actual process and yet it has never been perceived as a real requirement. So why then is cyber-security, which costs so much more to install, is considered a real necessity?

The answer, I believe, is in the fact that the risk to shutdown due to a lightning strike can be easily defined. We know what it is, how it will affect the process and how to fix the problem. Cyber-security on the other hand is an unknown. We don’t always know who the attacker is, where the attack will come from or how it will affect the systems. On top of all that we have no idea how much it will cost to put right.

Lightning damage is easy to understand then whilst cyber-security requires a huge amount of understanding with instrumentation and automation engineers having to work with IT engineers to create an understanding of the OT environment.

Cyber-security for OT has been around since the control system environment moved over to ethernet switching technologies effectively bringing the internet to the control level. In the early days air-gaps were considered enough. Then DMZ, defence in depth and zones and conduits. Now we have data diodes but, until those on the plant floor develop enough understanding about the why nots and wherefores, we will always be in danger since defences, no matter how strong and deep, will always be breached.

We need understanding. We need learning. We need collaboration between governments and standards organisations.we need direction.

Kind Regards,

Kind Regards,

Mohammed Loch President and CEO, DMS Global Director Industry Development International Society of Automation (ISA)

Hugh Wingrove Editor-in-Chief DMS Global

Automation

| December 2018

3

DMS ANALYTICS

PETRONAS Redevelopment of Bokor Phase 3 PETRONAS has been affected with the oil price drop in mid-2014 but quickly responded with cost-cutting, putting some projects on hold and the company selling some assets. With the oil price recovery last year, this has helped the company boost its profits which raised its spending for upstream projects in Malaysia.

PETRONAS is expected to drill around 120 wells and maintain 25 exploration wells in Malaysia for this year.

The Bokor Phase 3 Redevelopment is an enhanced oil recovery (EOR) project which will consist of Water and Gas Injection Facilities, Central Processing Platform (CPP) and Satellite Producer and Injector Platforms.

PETRONAS holds the 60% equity interest of the production sharing contract and Shell holding the remaining 40% interest of the project. By Q3 2014, PETRONAS issued a tender for conceptual study for the project and awarded Ranhill Worley a contract to revise the design by the next quarter. Expenditure cuts have slowed the progress of the project but by Q1 2016, but PETRONAS and Shell have revived the plans for the CCP. In Q2 2017, the FEED, PMC, and EPC were awarded by the client.

By Q3 2018, the first steel cut for the fabrication of the CCP’s topside and substructure took place and is now moving progressively ahead of time and underway for fabrication. The wellhead platform will be installed in Q1 2019, the first gas is expected in Q4 2019 and the project will be commissioned in Q2 2020.

PETRONAS plans to pay the government a higher dividend than what was promised to help expand its core business portfolio in the country. It is the world’s third-biggest LNG exporter after Qatar and Australia, and the sole manager of Malaysia’s oil and gas reserves.

Upstream activities will be modestly increased to assist the company’s revenue increase regularly.

“Competent, Committed, Dependable, since 1992”

MECHANICAL DOSH EQUIPMENT MECHANICAL MAINTENANCE DOSH EQUIPMENT MAINTENANCE MAINTENANCE

INSULATION AND

INSULATION AND REFRACTORY REFRACTORY

OFFSHORE OFFSHORE MAINTENANCE

MAINTENANCE

CORROSION

CORROSION ENGINEERING ENGINEERING

MAINTENANCE

PRE-COMMISSIONING

CONTROL AND

CONTROL AND INSTRUMENTATION INSTRUMENTATION

PLANT

PRE-COMMISSIONING CONSTRUCTION PLANT CONSTRUCTION

TURCOMP ENGINEERING SERVICES SDN BHD Lot 7, Jalan Gudang 16/9, Seksyen 16, 40200 Shah Alam, Selangor Tel : +6087-417986/ +6087-410749 Email : turcomp@turcomp.com http://www.turcomp.com/ VISIT US FOR MORE INFO!

4 Automation

| December 2018

DMS ANALYTICS

Malaysia’s Jimah East Power Plant To Be Completed

By The End of 2019 In Malaysia’s power sector today, coal plays a big role in this being imported from Indonesia (62%), Australia (24%), Russia(11%) and South Africa(2%).

Power generation is highly dependent on fossil fuels, 53% coal, 42% natural gas, and 5% hydro, along with other forms of renewable energy. The liberalization of Malaysia’s power sector will bring about great opportunities for Malaysia and it has gone through improvements since 2009 for it to achieve this today.

The Jimah East Power Plant project is a 2,000 megawatts (MW) greenfield coal-fired power station in Jimah, Negri Sembilan, or known as Project 3B. Located at a strategic site, it is an essential part of Malaysia’s future energy development plans which is vital to the security of power supply of the country. The plant will have a designed capacity or 2 coal-fired power stations with 1,000 MW each and 2 ultra-supercritical (USC) generators that can each produce one million kilowatts (kW) of energy.

The tender of the project was released in 2013 and awarded a year after. The Energy Commission (EC) had to retender the project earlier in 2015 due to some issues then TNB has signed a share sale and purchase agreement (SSPA) with 1MDB for the acquisition of the 1MDB’s 70% stake in Jimah East Power (JEP). The construction works started in 2016 and is going on schedule.

The project 3B is part of the government’s drive to export energy efficiency technology to emerging markets. Earlier this year, the development of the project has progressed putting the project on schedule to achieve commercial operations by Q2 2019 and fully completed by Q4 2019.

Automation

| December 2018

5

COMPANY NEWS

Protecting Critical Assets with Plant-Wide Condition Monitoring Solutions

Baker Hughes, a GE company, is the world’s first and only fullstream provider of integrated oilfield products, services, and digital solutions including Bently Nevada condition monitoring system. Bently represents over 60 years of condition monitoring innovation and experience, protecting and increasing uptime for the most critical machines in the oil and gas industry, reducing machinery breakdowns, minimizing downtime, increasing safety, and increasing productivity and lowering maintenance costs.

In Malaysia, Bently Nevada partners closely with Petronas Carigali Sdn Bhd, Petronas Gas Berhad to monitor their critical assets in the upstream, refinery and petrochemical sites. RAPID, the largest integrated refinery and petrochemical investment in Asia, uses Bently Nevada’s 3500 system to monitor all the critical assets in their plant. The 3500 system offers world-class

6 Automation

| December 2018

technology in detecting and preventing both missedtrips and false-trips in rotating machinery. It provides automatic protection value by tripping monitored machines to prevent expensive damage when needed. All these 3500 hardware systems are connected to Bently Nevada’s powerful edge to edge software, System 1 to help the Field Auxiliary Room & Main Control Building teams to monitor plantwide operations. In Kertih, our early warning detection software SmartSignal monitors 19 assets on 4 offshore platforms with Petronas Carigali Sdn Bhd-PMA. In all solutions, it is important to have localized machine diagnostic experts to support your operations.

We are committed to support our customers over the lifecycle of their operations, and service personnel are currently deployed to support the machine readiness test in RAPID as the facility goes live.

COMPANY NEWS Effective monitoring and asset protection starts with the right condition monitoring system, but it needs to be complemented by the right digital technology. BHGE Digital offers a unique Asset Performance Management (APM) solution for plants like RAPID. By integrating applied Artificial Intelligence (AI) and deep learning techniques into day-to-day workflows, APM software helps operators develop strategies that minimize risk and cost and dramatically reduce unplanned downtime by predicting equipment failures before they occur.

For any queries, please contact: Mohamed Suffian Yusoff-Lead Sales Specialist (mohamedsuffian.yusoff@bhge.com) Murali Babu Papanaidu-Services Project Manager(muralibabu.papanaidu@ge.com) R Sivarajah Rajagopal-Technical Lead(Rsivarajah.rajagopal@bhge.com

BHGE has the technology, localized expertise, and reference sites from around the world, and service teams to provide plant and enterprise wide solutions.

We would like the opportunity to be your partner of choice!

Part of Baker Hughes, a GE Company

Bently Nevada's suite of ground breaking rack-based and distributed machinery condition monitoring software and hardware solutions, vibration monitoring equipment and sensors enable greater asset reliability and enhanced efficiency of operations, backed by an expert global support services system.

Learn more online at industrial.ai

Automation

| December 2018

7

COMPANY NEWS

Yokogawa’s Synaptic Business Automation to address the industry’s Digital Transformation needs The speed of change in our business environment is getting more and more intensified. Our customers in the manufacturing industries are facing various challenges, such as intensified cost reduction pressure due to global competition, regulatory requirements changes, improving cyber security and aging workforces. The customers are demanding to see the situation more clearly and timely so that they can know what will happen in advance and act with agility to proactively manage changes.

If all the necessary data throughout plant processes and supply chains is synaptically integrated and intelligently transformed to meaningful information for business, it will be useful for the customers to make business decisions swiftly and to improve efficiency from manufacturing processes to business processes.

We envision this as Synaptic Business Automation.

Synaptic Business Automation underlies a process of co-innovation and collaboration with customers that leverages Yokogawa’s domain knowledge and digital automation technologies to create sustainable value.

Synaptic takes its name from the synapse, a structure in the nervous system that plays a role in the transfer of signals to other parts of the body.

With Synaptic, we help customers create new value by connecting and integrating everything such as data, organizations, business processes and supply chains with domain knowledge and digital automation technologies, like neural networks.

With Business Automation, we co-create value with customers by improving their business performance through optimization of supply chains and operations, and maximization of asset performance through coinnovation and digitalization.

To support customers’ business challenges, Yokogawa has been expanding our capabilities from OT (Operational Technology) and IT (Information Technology) to BM (Business Management) by process and business consulting. Our long term experience in OT assures the reliable process data handling. The capabilities for IT, such as IIoT (Industrial Internet of Things), secure cloud and remote technology, cyber physical System, digital twins, artificial intelligence, machine learning and Big Data analytics provide further value of the latest 8 Automation

| December 2018

technologies. Our unique combination of OT, IT and BM will provide one stop comprehensive solution from business to operations.

To realize customers’ Synaptic Business Automation, Yokogawa is aiming to work closely with customers to enhance the competitiveness and sustainable growth of their business by supporting improvements in productivity, profitability and business continuity.

The Value of Synaptic Business Automation Synaptic Business Automation focuses on creating sustainable value for customers through co-innovation and collaboration. The solution’s primary focus is to help customers realize profitable and sustainable growth. The first step in the process is to understand the potential value of customers’ business.

Synaptic Business Automation creates value for customers in three ways.

Resilient Operation Manage customers’ business risks with improving operational resilience. We help customers adapt more flexibly to changes in areas such as health, safety, security, and the environment (HSSE), organizational optimization, and regulatory compliance.

Optimized Production Optimize the total expenditure (TOTEX), components of capital expenditure (CAPEX), and operational expenditure (OPEX) over the entire lifecycle of a plant, and improve reliability. Also, directly create value by solving issues and optimizing operations throughout the supply chains, thereby enhancing productivity and profitability.

Business Innovation Work with specific customers to create new business models that foster manufacturing excellence by methods like supplying cloud-based services that drive collaboration with their customers and suppliers, and introducing environmentally friendly manufacturing practices that are essential for a sustainable society.

COMPANY NEWS

Key enablers of Synaptic Business Automation

The key enablers for co-innovation of our customers business is our unique approach of a Continuous Value Creation Cycle which consists of four phases: • Identify: Define potential improvement areas across the customer’s entire business processes and resources. o Strategic management consulting o Automation solution consulting o Profit improvement program o Co-innovation environment • Create & Implement: Design and deploy optimal solutions at the customer’s sites, based on the potential areas of improvement outlined in the ‘Identify’ phase.

• Operate: Perform safe and stable operations across

the customer’s entire business processes and resources. o Process modelling & simulation o Supply chain and operations optimization o Profit-driven operation o Energy management & optimization o Modular procedural automation o Main automation and information contractor o Agile project execution • Sustain & Improve: Maintain the solutions, helping the customer drive continuous improvement and sustained performance excellence. o Lifecycle services o Data analytics solutions o Cyber security management o Secure cloud services

Automation

| December 2018

9

COMPANY NEWS o Remote control & management o Supplier/customer collaboration By providing this cycle throughout the customers lifecycle, we hope to establish a reliable, lasting partnership with them. In each phase, we offer unique and diverse solutions and services. Our business scope is not only conventional automation and applications, but also comprehensive solutions from sensors to enterprise, to total plant, and beyond the plant such as cloud and remote solutions.

For more information, please visit www.yokogawa. com/my/solutions

www.yokogawa.com/my

Co-innovating tomorrow is a registered trademark of Yokogawa Electric Corporation.

10 Automation

| December 2018

2nd ISA Malaysia Section Event 2018

2nd ISA Malaysia Section Event 2018 5th - 6th December 2018

www.isa-malaysia.org

Mandarin Oriental, Kuala Lumpur - Malaysia

EXPERIENCE THE FUTURE.

#ISAMalaysia Organised By:

Titanium Sponsor

Platinum Sponsor

Gold Sponsors

Silver Sponsors

Supported By

Bronze Sponsor

Official Logistics Partner

Automation

| December 2018

11

5th - 6th December 2018

www.isa-malaysia.org

Kuala Lumpur - Malaysia

EXPERIENCE THE FUTURE.

nd #ISAMalaysia 2Mandarin ISA Oriental, Malaysia Section Event 2018 Organised By:

Wednesday 5th December 2018 7:15 am – 8:15 am Registration 8:15 am – 9:45 am Keynote Speeches

Mohammed Loch President & CEO DMS Global Director Industry Development ISA

Ir. V.R. Harindran Head Instrument PETRONAS Refinery and Petrochemical Corporation Sdn. Bhd. (PRPC) President, ISA Malaysia

Wan Shamilah Saidi Chief Digital Officer (CDO) PETRONAS

Amogh Bhonde Senior Vice President Power Controls and Digitalization Asia Pacific Region Siemens

Don Bartusiak Chief Engineer, Process Control ExxonMobil

9:45 am – 10:15 am Ribbon Cutting & Exhibition Tour 10:15 am – 12:00 pm Digitalization Speakers

Track Chair

Shah Rizal Custodian Engineer (Instrument & Control) PETRONAS

Bob Gill General Manager, Southeast Asia ARC Advisory Group

Jonas Berge Senior Director, Applied Technology Emerson Automation Solutions

Presentation:

Presentation

Digital Transformation: Where We Are and Where We Need to Go

Presentation

Operational Excellence and Top Quartile Performance through Digital Transformation

Rajeev Goyal Digital Transformation Leader Honeywell Engineering

Paul Sereiko Director – Marketing FieldComm Group Instruments, Systems, and Protocols in the Age of the IIoT

Dr. Antonio Feraco Vice President, Managing Consultant for Industrie 4.0 TÜV SÜD Asia Pacific Pte Ltd

Presentation

Presentation

Honeywell Connected Plant to Enable Smart, Connected Plant Operations

The Smart Industry Readiness Index.

The Starting Point to Plan Your Digital Journey In Oil And Gas

12:00 pm – 1:00 pm Lunch & Exhibition Networking 1:00 pm – 2:30 pm Field Instruments Speakers

Track Chair

Ir. Chua Kien Kek Custodian Engineer, Measurement PETRONAS

Sabyasachi Bhattacharyya Head, Product Management ABB Presentation

Remote Condition Monitoring of Analyzer Systems

12 Automation

Jens Michael Mindermann CEO BFI Automation Mindermann GmbH Presentation

Flame Safeguarding for Refineries and Gas Turbines

M Safwan M Shahid Senior Engineer, Central Field Instrumentation PETRONAS PENAPISAN (T) SDN BHD Presentation

From 24 to 7 – What is the Big Deal for Control Valve After Sales Support

2:30 pm – 3:00 pm Coffee Break & Exhibition Networking

| December 2018

3:00 pm – 5:00 pm Process Safety

Michael Murphy Director of Sales & Marketing REXA Inc. Presentation

Compressor & Turbine Modernization

Ir. Chua Kien Kek Custodian Engineer, Measurement PETRONAS

M Safwan M Shahid Senior Engineer, Central Field Instrumentation PETRONAS PENAPISAN (T) SDN BHD

Jens Michael Mindermann CEO BFI Automation nd Mindermann GmbH

Sabyasachi Bhattacharyya Head, Product Management ABB

Michael Murphy Director of Sales & Marketing REXA Inc.

2 ISA Malaysia Section Event 2018

Presentation

Presentation

Remote Condition Monitoring of Analyzer Systems

Presentation

Compressor & Turbine Modernization

Presentation

Flame Safeguarding for Refineries and Gas Turbines

From 24 to 7 – What is the Big Deal for Control Valve After Sales Support

2:30 pm – 3:00 pm Coffee Break & Exhibition Networking 3:00 pm – 5:00 pm Process Safety Track Chair

Speakers

Co-Speakers

Sharul A Rashid Principal Engineer Instrument & Control PETRONAS

Friedhelm Best Vice President HIMA ASIA PACIFIC

Richard Harvey Global Product Manager IMI Precision Engineering

Presentation

Brandon Tan Tian Shyong Senior Instrument Engineer PETRONAS

Mohd Rashdan Mahmood Custodian (I & C Upstream) and Business Technical Authority (Instrument & Control) PETRONAS

Presentation

PMC Pipeline Management & Controls

Using Redundant Actuation Control to Reduce Plant Downtime

Zainulizam B Ishak Staff (Machinery Control) PETRONAS Presentation

Presentation

Real-time Remote Management of Safety-critical OT Over Corporate it Infrastructure In Oil & Gas Operations

Khairom Mustaqim Baharom Control System Engineer PETRONAS PENAPISAN (T) SDN BHD

Dr. Issam Mukhtar Functional Safety Consultant Schneider Electric

Presentation

Digitalization of Functional Safety for Avoidance of Systematic Failures

Journey Towards Zero Trip

Presentation

Towards Process Safety Excellence with Cost Optimization – PETRONAS Experience

Thursday 6th December 2018 7:45 am – 8:45 am Registration 8:45 am – 10:30 am Industrial Control Systems Cybersecurity Track Chair

Azmi Hashim Principal Engineer Instrument & Control PETRONAS

Speakers

Lee Chee Hoe SecurePlant Global Program Governance, Cyber Security Consultant for Europe, Global IA Cyber Security Evangelist Yokogawa Europe B.V

Ahmad Tarmizi Bin Mohd Subsystem Engineer PETRONAS PENAPISAN (Terengganu) Sdn Bhd Presentation

Accelerating Cyber Security Culture Maturity into Workplace

Gilles Loridon CEO Global Security Network Presentation

Lessons Learned When Implementing the Zones & Conduits Concept From ISA/IEC 62443

Presentation

Cyber Security Fueling Digital Transformation Journey

Muhammad Syazwan Bin Muhammad Adib Executive DCS PLC PETRONAS GAS BERHAD (PGB)

Ian Bramson Head of Global Cybersecurity Sales and Strategy Siemens

Presentation

Power in the Wrong Hands: The Rise of Cyber Security Risk in the Energy Market

Journey to PCS Cybersecurity Compliance in GPS PGB

Presentation

Automation

| December 2018

13

Staff (Machinery Control) PETRONAS

2nd ISA Malaysia Section Event 2018 Presentation

Control System Engineer PETRONAS PENAPISAN (T) SDN BHD

Functional Safety Consultant Schneider Electric

Presentation

Digitalization of Functional Safety for Avoidance of Systematic Failures

Journey Towards Zero Trip

Presentation

Towards Process Safety Excellence with Cost Optimization – PETRONAS Experience

Thursday 6th December 2018 7:45 am – 8:45 am Registration 8:45 am – 10:30 am Industrial Control Systems Cybersecurity Track Chair

Speakers

Azmi Hashim Principal Engineer Instrument & Control PETRONAS

Lee Chee Hoe SecurePlant Global Program Governance, Cyber Security Consultant for Europe, Global IA Cyber Security Evangelist Yokogawa Europe B.V

Ahmad Tarmizi Bin Mohd Subsystem Engineer PETRONAS PENAPISAN (Terengganu) Sdn Bhd Presentation

Gilles Loridon CEO Global Security Network Presentation

Lessons Learned When Implementing the Zones & Conduits Concept From ISA/IEC 62443

Presentation

Accelerating Cyber Security Culture Maturity into Workplace

Cyber Security Fueling Digital Transformation Journey

Muhammad Syazwan Bin Muhammad Adib Executive DCS PLC PETRONAS GAS BERHAD (PGB)

Ian Bramson Head of Global Cybersecurity Sales and Strategy Siemens

Presentation

Power in the Wrong Hands: The Rise of Cyber Security Risk in the Energy Market

Journey to PCS Cybersecurity Compliance in GPS PGB

Presentation

10:30 am – 11:00 am Coffee Break & Exhibition Networking 11:00 am – 12:30 pm Turbomachinery Controls Speakers

Track Chair

Ir. Surendran Kandasamy Principal Engineer, Machinery Control PETRONAS

Alan Wong Technical Consulting Engineer Compressor Controls Corporation

Mohamed Abousalem Regional Commercial Leader Compressor Controls Corporation

Martijn Bemmelmans Control Specialist CONTROL-CARE B.V

Presentation

Presentation

Plant DCS Based Turbomachinery Controls

Start Project off on the Right Foot – Combating Compressor Piping & Instrumentation Design Mistakes

Synergetic Optimization of Process and Turbomachinery Controls

Presentation

Mohd Azrul Adha B Mohd Sohaimi Machinery Control Engineer PETRONAS Presentation

Upgrading Obsolete Gas Turbine Control Panels – What To Look Out For as the End User?

12:30 pm – 1:30 pm Lunch & Exhibition Networking 1:30 pm – 3:00 pm Advanced Process Control & Optimization Track Chair

Speakers

Prakash Kumar Karunakaran Custodian Engineer for Advanced Process Control PETRONAS

14 Automation

Abdul Rahman Mustapha Senior Manager – Oil, Gas & Chemical ABB Malaysia Sdn. Bhd. Presentation

Innovation to Process Control | December 2018 System with Digitalization

David Lincoln Digital Lead ABB Presentation

Digital Technologies for Reliable Operation and Maintenance of Measurement Devices

Azmeer Abdullaziz Technical Lead Advance Gas Turbine Solutions Sdn. Bhd. Presentation

Performance Evaluation Of Centrifugal Compressor

Kwok Hong, Hor (KH) Asia Pacific General Manager Controls & Condition Monitoring Baker Hughes, a GE Company (BHGE) Presentation

Plantwide Monitoring

Principal Engineer, Machinery Control PETRONAS

Technical Consulting Engineer Compressor Controls Corporation Presentation

Start Project off on the Right Foot – Combating Compressor Piping & Instrumentation Design Mistakes

Regional Commercial Leader Compressor Controls Corporation

Control Specialist CONTROL-CARE B.V

Presentation

Plant DCS Based Turbomachinery Controls

Machinery Control Engineer PETRONAS

2nd ISA Malaysia Section Event 2018

Synergetic Optimization of Process and Turbomachinery Controls

Presentation

Presentation

Upgrading Obsolete Gas Turbine Control Panels – What To Look Out For as the End User?

12:30 pm – 1:30 pm Lunch & Exhibition Networking 1:30 pm – 3:00 pm Advanced Process Control & Optimization Track Chair

Speakers

Prakash Kumar Karunakaran Custodian Engineer for Advanced Process Control PETRONAS

Abdul Rahman Mustapha Senior Manager – Oil, Gas & Chemical ABB Malaysia Sdn. Bhd. Presentation

David Lincoln Digital Lead ABB Presentation

Innovation to Process Control System with Digitalization

Digital Technologies for Reliable Operation and Maintenance of Measurement Devices

Azmeer Abdullaziz Technical Lead Advance Gas Turbine Solutions Sdn. Bhd.

Kwok Hong, Hor (KH) Asia Pacific General Manager Controls & Condition Monitoring Baker Hughes, a GE Company (BHGE)

Presentation

Performance Evaluation Of Centrifugal Compressor

Presentation

Plantwide Monitoring

3:00 pm – 3:30 pm Coffee Break & Exhibition Networking 3:30 pm – 5:15 pm Automation System Obsolescence and Life Cycle Management Track Chair

Mohd Rashdan Mahmood Custodian (I & C Upstream) and Business Technical Authority (Instrument & Control) PETRONAS

Speakers

Dion Phandu Technical Manager – Distributed Control System BASF PETRONAS CHEMICALS SDN. BHD.

Chung Hong Hong Regional Sales Development Manager Siemens Pte Ltd Presentation

Presentation

Ensuring Serviceability and Optimization of Plant Availability

Presentation

AI Based – Autonomous Equipment Health Monitoring System

Managing Software Obsolescence To Sustain Automation System Expected Life Time

Sherman Tng Regional Sales Manager SpectraSensors Presentation

On-line Monitoring of H2O in Natural Gas at the Outlet of Molecular Sieve Dryer Vessels Using Tunable Diode Laser Absorption Spectroscopy (TDLAS) Analyzers

Vicknendran Krishna Younee Vice President, Head of GTM PS CD South East Asia Siemens Malaysia Sdn Bhd

Michele Ferrante Engineering Manager VSI Controls Presentation

A More Efficient Approach to Control Valve Maintenance

Automation

| December 2018

15

2nd ISA Malaysia Section Event 2018

Keynote Speakers Mohammed Loch

President & CEO DMS Global Director Industry Development – ISA

Mohammed Loch is the President & CEO of DMS Global. DMS Global’s range of activities include Events, Publishing, Video Production, Web Services, PR & Branding Solutions, ultimately complementing its project intelligence database. With this diverse range of activities, DMS is the only media company that can truly call itself a marketing specialist for the Energy Sector. Other than DMS Global, Mohammed’s other roles include; the Director Industry Development for the International Society of Automation (ISA), the Middle East, Africa & Asia Pacific Partner of the ARC Advisory Group, Regional Director Middle East for the Manufacturing Enterprise Solutions Association (MESA) as well as FieldComm Group, Director of Market Intelligence for the Bilateral US-Arab Chamber of Commerce, and Partner & Executive Director of the Choice to Change Foundation.

Ir. V.R.Harindran Head Instrument PETRONAS Refinery and Petrochemical Corporation Sdn. Bhd. (PRPC) President, ISA Malaysia Ir. V.R.Harindran is the Senior Custodian, Instrument & Control, at Group Technical Solutions (GTS), Project Delivery & Technology (PD&T) Division of PETRONAS. He is also the Group Technical Authority, Instrument & Control for the PETRONAS Group of companies. He is also an Associate Professor in the Electrical & Electronics Department of University Technology PETRONAS (UTP). He holds a B.Sc in Electrical & Electronics Engineering (1984) and M.Sc. in Technology Management (2010), both from UK universities.

Ir. V.R.Harindran joined PETRONAS in 1992 as an Instrument Engineer in the PETRONAS Methanol Plant at Labuan. He was then transferred to Malaysian LNG, Bintulu, Sarawak as a Senior Manager, Instrument in 2000. He was transferred to PETRONAS HQ, Kuala Lumpur in 2005 as a Principal Engineer, I&C to oversee the overall instrumentation direction for PETRONAS. His current PETRONAS role covers group-wide capability development of instrument engineers, setting technical standards, directions and providing solutions on instrument & controls for Upstream and Downstream projects and operating units. As the only Senior Custodian in PETRONAS, he also mediates on differences in technical and business opinions between the management and the various engineering disciplines in the group. Prior to joining PETRONAS, Ir. V.R.Harindran was the Head of electrical & Instrument at Sabah Gas Industries Sdn. Bhd., Labuan.

Wan Shamilah Saidi Chief Digital Officer (CDO) PETRONAS Wan Shamilah is the Chief Digital Officer (CDO) of PETRONAS. Her career with PETRONAS is diverse, with previous roles spanning Finance, Mergers & Acquisition, Corporate Planning and Marketing & Trading. At different junctures, she served as the CFO for three key subsidiaries: PETRONAS Gas Berhad, Malaysia LNG Sdn. Bhd. and PETRONAS Chemicals Sdn. Bhd. Before her role as CDO, Shamilah led the Corporate Strategic Planning unit of PETRONAS, where she originated strategic initiatives to steer the company forward in a low oil price environment. Shamilah completed her Economics and Accounting degree at Bristol University. She is a Fellow of the Institute of Chartered Accountants in England & Wales and a member of the Malaysian Institute of Accountants. She currently serves as Chairman of PETRONAS ICT Sdn. Bhd., and is a board member of PETRONAS Gas Berhad and PETRONAS Research Sdn. Bhd.

16 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Amogh Bhonde Senior Vice President Power Controls and Digitalization, Asia Pacific Region Siemens Amogh Bhonde is the Senior Vice President of Siemens Energy Controls & Digitalization for the Asia Pacific Region. This group comprises of team members operating across a diverse set of markets and countries: ASEAN; China; India; Korea; Australia and Japan. He is based in Kuala Lumpur, Malaysia.

In his role, Bhonde is responsible for plant automation services and digital innovation for Customers in the Power Sector.

Bhonde has more than 18 years of experience in the power generation industry, and has held various roles of increasing responsibility throughout his career. Most recently, he was the Director of US Operations for the Steam Turbine Business in Charlotte, USA, where he was responsible for engineering, and manufacturing of large steam turbines.

Bhonde received his Bachelor’s degree in Mechanical Engineering from the University of Pune, and his Master’s degree in Industrial and Systems Engineering from the University of Florida.

Don Bartusiak Chief Engineer, Process Control ExxonMobil Don Bartusiak is Chief Engineer, Process Control for ExxonMobil Research and Engineering.

He has 30 years of experience in process control and advanced computing with ExxonMobil, and 7 years of experience in process development research with Bethlehem Steel. During his career with ExxonMobil, he has been a process control application engineer working on artificial intelligence, linear and nonlinear model predictive control, and real-time optimization at facilities in the U.S. and U.K in both central engineering offices and manufacturing. From the mid-1990s, he held supervisory or senior technical positions with responsibility for instrumentation, process analyzers, control systems, and control applications at facilities in Texas and Virginia. From 2000 to 2002, he was Lecturer and Adjunct Professor of Chemical Engineering at Rice University.

Don received a B.S. (ChemE) from the University of Pennsylvania and M.S. and Ph.D (ChemE) degrees from Lehigh University. He is a former National Director of the Computing and Systems Technology (CAST) Division of the American Institute of Chemical Engineers (AIChE) and Process Control Programming Chairman for the Ethylene Producers Committee.

He currently serves on Technical Committee 6.1 for Chemical Process Control in the International Federation of Automatic Control (IFAC) and is a Managing Director in the Standards and Practices Board of the International Society of Automation (ISA). In 2011, he received the Computing Practice Award from the CAST Division of AIChE. He was inducted into Control Engineering’s Automation Hall of Fame in 2015 and in 2016 was named to Smart Industry’s Top 50 Innovators. He has published 10 journal articles and is co-inventor on 4 patents.

Automation

| December 2018

17

2nd ISA Malaysia Section Event 2018

Digitalization Day 1 (5th December) 10:15 AM – 12:00 PM

Track Chair Shah Rizal Custodian Engineer (Instrument & Control) PETRONAS Shah Rizal is currently Custodian Engineer (Instrument & Control) with PETRONAS Group Technical Solutions (GTS) and the Group Technical Authority in Instrument and Control for PETRONAS. He has been with the organization for 20 years now. His key expertise covers broad spectrum of instrumentation, systems and functional safety, with several technical papers published locally and internationally since 2002.

He is currently the Chaiman for SIRIM Working Group for Industrial Networks, Technical Advisory Committee for the Manpower Department of Ministry of Human Resource, Expert panel member for IEC, certified TÜV Functional Safety Engineer and Industry Advisory Panel member for UTP. Apart from his day-to-day job, he also does adjunct lecturing at UTP and ADTEC He initiated the development of the PETRONAS Technical Standard (PTS) for Alarm Management in 2007 and has since been actively involved in the functional safety management improvement activities across the businesses in PETRONAS.

Speakers Bob Gill General Manager, Southeast Asia ARC Advisory Group Presentation: Digital Transformation: Where We Are and Where We Need to Go Bob Gill manages ARC Advisory Group’s business operations and market research activities in Southeast Asia. ARC provides technology research, advisory and consulting services to industrial automation and software suppliers as well as to end-user companies in the manufacturing, infrastructure and energy sectors.

Bob is a regular speaker at company and industry conferences. Recent (2018) engagements include: Industry of Things World Asia; Honeywell Asia Pacific Channel Partner Conference; Singapore ICS Cyber Security Conference; Yokogawa Asia Pacific User Conference, and HIMA Users Conference Asia Pacific.

His work experience includes engineering roles (15 years) in the UK and Singapore, at British Aerospace, General Electric Company, and SIMTech. He holds a BSc in Electronics and MSc in Manufacturing Systems Engineering (both from University of Wales, UK), and an MBA from NTU in Singapore.

18 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Jonas Berge Senior Director, Applied Technology Emerson Automation Solutions Presentation: Operational Excellence and Top Quartile Performance through Digital Transformation Jonas Berge is educated in Sweden and is a Senior Director at Emerson Automation Solutions in Singapore. He is responsible for helping plants and EPCs to adopt new technologies moving the industry forward with digital transformation. He has over thirty years of experience in the field of instrumentation and controls. Mr. Berge is a Subject Matter Expert (SME) in the field of Digital Transformation (DX) including fieldbus, wireless, and the Industrial Internet of Things (IIoT). Mr. Berge is a senior member of ISA, participating in the ISA104 and ISA108 standards committees and sits on the Steering Committee of the FieldComm Group in Asia Pacific. Mr. Berge is the author of the books “Fieldbuses for process control: Engineering, Operation, and Maintenance” and “Software for Automation: Architecture, Integration, and Security” and has contributed to several other books and is frequently featured in articles. He is the editor for the ANSI/ISA/IEC/TR 61804-6 standard. Holds patents in safety communications. Occasionally act as adjunct lecturer.

Paul Sereiko Director - Marketing FieldComm Group Presentation: Instruments, Systems, and Protocols in the Age of the IIoT Sereiko is responsible for guiding worldwide marketing efforts at FieldComm Group – the owner of the HART, WirelessHART, FOUNDATION Fieldbus, and FDI specifications. He has extensive IIoT background in previous roles as CEO of two private sensor networking companies, and has actively participated in the development of global standards for industrial communications and device integration technologies since 2002. He has spoken on these topics at previous ISA and FieldComm Group events. He holds a BS in Computer Engineering from the University of Illinois and an MBA in Marketing & Finance from Northwestern University’s Kellogg Graduate School of Management

Rajeev Goyal Digital Transformation Leader Honeywell Engineering Presentation: Honeywell Connected Plant to Enable Smart, Connected Plant Operations Rajeev has Engineering & MBA degrees along with 28 years of experience in Upstream Oil & Gas domain with various MNCs. He is also pursuing a PhD in the Integrated Operations Management along with his Honeywell role advising clients on Digital Transformation.

10 years back, he moved from Operating side (as Asset GM) to Consulting side, and has been adding business value with his expertise on Digital Transformation, Business Performance Improvement, Enterprise Asset Management , Operational Efficiency Optimization, HSE, Supply Chain etc.

Ha has presented / Chaired in various Upstream / O&G / Deepwater / IT / Int Ops Industry Forums in Australia, China, Dubai, India, Indonesia, Singapore, South Africa etc.

Automation

| December 2018

19

2nd ISA Malaysia Section Event 2018 Dr. Antonio Feraco Vice President, Managing Consultant for Industrie 4.0 TÜV SÜD Asia Pacific Pte Ltd Presentation: The Smart Industry Readiness Index. The Starting Point To Plan Your Digital Journey in Oil and Gas. Dr. Feraco is Vice President, Managing Consultant in Industrie 4.0 for TÜV SÜD Asia Pacific Pte Ltd. He focuses his activities in supporting the manufacturing sector, process industry, embracing their journey towards digitalization and Industrie 4.0. He was Head of Business Development and Technology Transfer of a Fraunhofer Institute, senior Advisor for KPMG Europe and Adjunct Professor of Innovation Process Management. After his PhD in Artificial Intelligence, he managed international projects for the European Commission in IT for energy efficiency, embedded systems in robotics and Digital Transformation. He also participated in the development of an ICT Policy Support Program Project of the EC.

20 Automation

| December 2018

2nd ISA Malaysia Section Event 2018

Field Instruments Day 1 (5th December) 1:00 PM – 2:30 PM

Track Chair Ir. Chua Kien Kek Custodian Engineer, Measurement PETRONAS Ir. Chua Kien Kek graduated with a B.ENG in Electrical & Electronics Engineering from U.K. Master Analytical Chemistry & Instrumental Analysis, University Malaya. He is a registered Professional Engineer with the Board of Engineers, Malaysia. Currently holding the position as Custodian Engineer for Measurement, Instrument department in Project Delivery & Technology (PD&T), PETRONAS, providing consultancy and technical advisory services to the PETRONAS Group. He has worked in PETRONAS in the analyzer and custody metering field for more than 30 years.

Speakers Sabyasachi Bhattacharyya Head, Product Management ABB Presentation: Remote Condition Monitoring of Analyzer Systems Sabyasachi Bhattacharyya is Head of Product management & Digital Leader for BU Measurement & Analytics in ABB India. Prior to joining ABB in 2017, he was the Global Product Manager for Gas Measurement in Honeywell looking at the global O&G market. He was also involved in developing new value streams which focused on IIOT and Industry 4.0.

He got his MBA from IE Business School, Spain and is a Bachelor in Electronics Engineering from Pune University. His current interests lies in leveraging digital to introduce new products and solution to the Industrial Automation market.

Jens Michael Mindermann CEO BFI Automation Mindermann GmbH Presentation: Flame Safeguarding For Refineries and Gas Turbines Michael Mindermann studied electrical engineering in Aachen and finished in 1986.

From 1986 till 1999 he worked as a design engineer with BFI Automation and took over the management in 1999 with 49% ownership.

Since 2014 he is the sole owner and CEO of BFI Automation Mindermann GmbH.

Automation

| December 2018

21

2nd ISA Malaysia Section Event 2018 M Safwan M Shahid Senior Engineer, Central Field Instrumentation PETRONAS PENAPISAN (T) SDN BHD Presentation: From 24 to 7 – What is the Big Deal for Control Valve After Sales Support 2010/11 : Seeding Engineer / Project Controller – involved in multiple DCS/PLC related projects and turbomachinery PLC commissioning 2012/13 : QMI Engineer – day to day analysers and metering maintenance and short to long term analyser and metering improvement 2014/15: Refinery Field Engineer – daily maintenance of Instruments at Refinery plant. short to long term field instrumentation improvement 2016 until now : Instrument Central Field Engineer – Instrument TA Coordinator, Project Assistance to Technical Services Dept., Focal point for IPF Study and Improvement, short and long term instrument studies and projects.

Michael Murphy Director of Sales & Marketing REXA Inc. Presentation: Compressor & Turbine Modernization Mike Murphy is the Director of Sales & Marketing with REXA Inc. REXA is a world class manufacturer of precision actuation utilized in critical process controls applications.

Murphy has a Bachelors of Science Degree from Worcester Polytechnic Institute with a dual degree in Electrical and Mechanical Engineering. Mr. Murphy has had a 25 year career with a focus in process controls across the industrial spectrum. Mr. Murphy has previously been a business owner and has held positions of Power Industry Manager, Rotating Equipment Product Manager, and Marketing Manager in his time at REXA. Mr. Murphy recently was selected as a speaker at the 2017 Middle East Process Engineering Conference.

22 Automation

| December 2018

2nd ISA Malaysia Section Event 2018

Process Safety Day 1 (5th December) 3:00 PM – 5:00 PM

Track Chair Sharul A Rashid Principal Engineer Instrument & Control PETRONAS Sharul A Rashid who is the Principal Engineer, Instrument and Control in East Coast Refinery and Aromatics Plant based in Kertih, Terengganu, Malaysia, will be official Custodian Engineer, Instrument and Control effective 1st January 2019. Sharul has more than 28 years of experience in handling instrumentation and control issues in oil & gas, gas liquefaction and petrochemical plant including pipeline transmission network. Sharul advises not only within his plant site but also PETRONAS-wide on instrumentation and control issues. He involved as an instrumentation expert in many key PETRONAS projects e.g. Kertih Compressor Station, Peninsular Gas Utilisation metering stations and MLNG Satu Rejuvenation and MLNG Dua Debottlenecking. Sharul has been sharing globally* of his valuable accumulated PETRONAS experience in IIOT & Digitalization, Cyber Security, Asset Management Excellence and Process Safety Compliance that cover smart predictive methodology (e.g. Early Warning System and wireless sensors), plant automation (e.g.

Offsite Automation System Rejuvenation). *Note: Singapore, Indonesia, Thailand, Vietnam, Australia, UAE, Oman, Switzerland, United Kingdom, Netherland, German, Turki, USA and all the way to Russia , Tatarstan and Kazakhtan.He participated in various HSE Management System Assurance Audits throughout PETRONAS sites including Engen Refinery, Durban, South Africa. He contributed PETRONAS to develop core competency program, accelerated capability development and intensified coaching for instrument engineers and technicians – the program has been accredited by United Kingdom Institute of Measurement and Control since 2014. Prior to joining PETRONAS, Sharul worked at MOTOROLA Semiconductor in Arizona, USA. Sharul graduated with honors in Bachelor of Science in Electrical Engineering from University of Miami, Florida. He pursued Master in Engineering in University of Florida, Gainesville, USA . He is a member of the International Society of Automation (ISA), Institute of Engineering Malaysia and Board of Engineer Malaysia. He is part of review committees for IECEx & ISA 75 Control Valve Standards, and Industry Panels for University of Technology PETRONAS (UTP) & Universiti Teknologi Malaysia (UTM). He is TUV certified Functional Safety Engineer since 2011.

Speakers Friedhelm Best Vice President HIMA ASIA PACIFIC Presentation: PMC Pipeline Management & Controls In the role of the Vice President Asia Pacific Region, Friedhelm Best has responsibility for HIMA’s business across Asia and the Pacific region. This includes the activities in Sales, Consulting, Engineering, Service, Administration and Finance. The HIMA Group is the world’s leading independent provider of solutions for safety-critical applications.

Formerly Sales Director for Europe and Africa, Friedhelm Best has extensive experience in international business and was responsible for notable large-scale projects.

Prior to this, Friedhelm worked as Director of Global Key Account Management Industry in the Electrical Sector of Eaton Corporation. He was responsible for coordinating activities for global accounts in selected key segments as Marine & Offshore.

Friedhelm began his career as a sales engineer at HARTING in Germany, and was subsequently key account manager for Automotive Production.

Friedhelm earned degrees in precision engineering from the University of Applied Sciences in Wilhelmshaven and in industrial engineering and management from the University of Applied Sciences in Emden. He is a certified Functional Safety Engineer (TÜV Rheinland) and is located in Singapore.

Automation

| December 2018

23

2nd ISA Malaysia Section Event 2018 Richard Harvey Global Product Manager IMI Precision Engineering Presentation: Using Redundant Actuation Control to Reduce Plant Downtime Richard Harvey is the Global Product Manager for the ICO4-PST Smart Solenoid Partial Stroke Testing system.

Richard has a BSc in Applied Physics from the Nottingham University and is an Incorporated Engineer with the Engineering Council and a Member of the Institute of Engineering & Technology. Richard is also a TÜV certified Functional Safety Professional, a member of the International Society of Automation and a member of the Institute of Measurement and Control.

With over 15-years’ experience in functional safety and PST covering field service, development, and sales he was worked in valve actuation, valve controls and PST testing always with a focus on functional safety.

Richard has participated in industry forums across the globe including on the panel for “Fit for Purpose Valves” at ValveWorld Houston and ISA conferences.

Brandon Tan Tian Shyong (Co-Speakers) Senior Instrument Engineer PETRONAS Presentation: Real-time Remote Management of Safety-critical OT Over Corporate it Infrastructure In Oil & Gas Operations Brandon Tan is currently senior instrument & control engineer with PETRONAS Upstream.

He has experience in various spectrum of production: operation, maintenance and engineering; having been maintenance engineer and subsequently offshore maintenance supervisor before taking up the assignment in field improvement projects under Engineering department.

He was also the technology lead tasked for the implementation of Brownfield Digitalization, having also been the design engineer for Sarawak Oil’s first PETRONAS Digital Collaboration Centre, resulted in the reduction of unplanned deferment in a major oil producer. He was part of the team that trial tested predictive & prescriptive diagnostics, collaborating across PETRONAS to prepare brownfield readiness towards the Field of the Future.

In his current role in Engineering, he is pursuing specialization in functional safety while also exploring new technologies related to digitalization and cybersecurity that can further enhance the adoption of Industrial Internet of Things Mohd Rashdan Mahmood (Co-Speakers) Custodian (I & C Upstream) and Business Technical Authority (Instrument & Control) PETRONAS Presentation: Real-time Remote Management of Safety-critical OT Over Corporate it Infrastructure In Oil & Gas Operations Rashdan is currently Custodian and Business Technical Authority (Instrument & Control) for PETRONAS Upstream. He is also the Team Leader for Project SAINT, tasked to ensure the integrity of all safeguarding instrumentations in Upstream Petronas.

In PETRONAS, he has been instrumental in introducing specialized safety initiatives such as IPF and 3D Fire & Gas Mapping, culminating with PETRONAS’ own software P-IPF and 3D FnGMap. He has also the Alternate Chairman for SIRIM Malaysia Standards focusing on adoption of IEC 61508 and IEC 61511.

He is now the Technical Advisor for Project PRiME, addressing PETRONAS Upstream needs for a predictive approach in instrument reliability & availability, as part of Digitalization efforts in PETRONAS. He has also appointed to transform technical learning through digitalization for instrumentation group, the first to be sandbox tested in PETRONAS before rolling out in 2019.

24 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Zainulizam B Ishak Staff (Machinery Control) PETRONAS Presentation: Journey Towards Zero Trip 5 years in maintenance of Turbo machinery packages 3 years in technical services specializing in Turbo machinery packages Lead compressor control upgrade, vibration monitoring system upgrade, fire & gas system upgrade.

Lead software and hardware robustness for turbo machinery packages.

Khairom Mustaqim Baharom Control System Engineer PETRONAS PENAPISAN (T) SDN BHD Presentation: Towards Process Safety Excellence with Cost Optimization – PETRONAS Experience Khairom is young Control System Engineer serving 6 years in Kertih Refinery and Aromatics Plant based in Kertih, Terengganu, Malaysia.

He has been involved in several instrument projects within Kertih Refinery such as fire and gas system upgrade, plant safeguarding system upgrade, and plant distributed control system upgrade besides troubleshooting experience in control system as well as field instrumentation. His current project includes strengthening Kertih Refinery Process Controls Network security. Previously, Khairom is a Maintenance Project Controller, looking into overall Maintenance project in PETRONAS Refinery Kertih in term of project progression and cost.

Dr. Issam Mukhtar Functional Safety Consultant Schneider Electric Presentation: Digitalization of Functional Safety for Avoidance of Systematic Failures Graduated from Manchester University in 1977 with a PhD in Electrical Engineering, Dr Mukhtar has been involved with industrial instrumentation & controls design since 1978.

For the last ten years, he has been specifically focused on the design and implementation of Safety Instrumented Systems in heavy industrial applications including power, chemical, petroleum, mineral processing and steel making sectors. Dr Mukhtar is a certified TUV Senior Functional Safety Expert.

Automation

| December 2018

25

2nd ISA Malaysia Section Event 2018

Industrial Control Systems Cybersecurity Day 2 (6th December) 8:45 AM – 10:30 AM

Track Chair Azmi Hashim Principal Engineer Instrument & Control PETRONAS Azmi is an Instrument and Control Principal Engineer in Group Technical Solutions, PETRONAS. He leads a team performing gap assessment against PETRONAS Technical Standards on Process Control System at PETRONAS operating facilities with regards to information security. Six years prior, he served last as an Instrument Staff Engineer in a PETRONAS refinery. Throughout his 23 years of service, he has accumulated experience as a discipline auditor, competency assessor, line trainer and project engineer. Azmi gained his Bachelor of Science in Electrical Engineering from Cornell University, U.S.A. and is a member of Board of Engineers, Malaysia.

Speakers Ahmad Tarmizi Bin Mohd Subsystem Engineer PETRONAS PENAPISAN (Terengganu) Sdn Bhd Presentation: Accelerating Cyber Security Culture Maturity into Workplace He is currently subsystem engineer in East Coast Refinery and Aromatics Plant based in Kertih, Terengganu, Malaysia, overseeing subsystems that integrate with main control system in the plant. Prior moving to subsystem area, he has lead refinery field instrumentation.

Prior joining PETONAS, he start his career in Automation Industry as Design Engineer with Tateyama Auto Machine.

Lee Chee Hoe SecurePlant Global Program Governance, Cyber Security Consultant for Europe, Global IA Cyber Security Evangelist Yokogawa Europe B.V Presentation: Cyber Security Fueling Digital Transformation Journey Lee Chee Hoe is the Global IA Cyber Security Evangelist based out of Yokogawa Europe.

He has over 20 years of experience in Industrial Cyber Security spearheading as Security Engineer, Consultant, Project Manager, Cyber Security Sales and Business Development across various industries. He has Distinction Degree in IT from Queensland University of Technology and holds the Certified Information Systems Security Professional (CISSP), GICSP certifications from GIAC and ISA/IEC 62443 certification. He had recently participated as a panel speaker during the SPE Symposium for Oil & Gas industry, CS4CA MENAT in Dubai and in the ICS Cyber Security Conference in Singapore. Mr. Lee is the program governance for one of the world’s largest Oil & Gas customer in overseeing deployment, architecture management and managed services for Cyber Security.

26 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Gilles Loridon CEO Global Security Network Presentation: Lessons Learned When Implementing the Zones & Conduits Concept From ISA/IEC 62443 Gilles Loridon has worked as an IT Consultant for twenty-four years and as InfoSec Consultant for more than nineteen years. In 1999, Gilles joined the European Leader in Strategic Security, as a Senior Security Consultant and later on, took the position of CEO of Global Security Network, its Middle East branch. Gilles has been leading and implementing successful InfoSec projects for Security Agencies, Military Departments, Oil & Gas companies and International corporations in Europe, Africa, as well as in the Middle East.

Gilles has been conducting InfoSec Audits & VA/PT, ISO/ISF/ADISC ISMS implementations and Awareness Training in the Energy, Finance and Governmental sectors. Gilles is certified ISA/IEC 62443 Cyber Security Fundamentals Specialist.

Muhammad Syazwan Bin Muhammad Adib Executive DCS PLC PETRONAS GAS BERHAD (PGB) Presentation: Journey to PCS Cybersecurity Compliance in GPS PGB First started to serve PETRONAS in 2008 at Gas Processing Santong (GPS) as a seeding in I&C section, Maintenance Department. A year later in 2009 he was promoted as a Field Instrument Engineer for 3 years before upskilling to DCS PLC Engineer from 2012 to date.

As a system engineer, he is responsible to ensure the maintenance and rectification works of FOXBORO DCS, SIS and PLC covering GPP 5, GPP 6 and DPCU 3 at GPS. He led the ISMS first certification at GPS back in 2012 and since then had never stop to support PGB for successful recertification for the whole Gas Processing Plant inclusive GPK and TSET. Ian Bramson Head of Global Cybersecurity Sales and Strategy Siemens Presentation: Power in the Wrong Hands: The Rise of Cyber Security Risk in the Energy Market Ian Bramson serves as Head of Cybersecurity Sales and Strategy for Siemens Global Cyber Strategy team. In this role, Ian is at the forefront of securing industrial networks and reducing cyber risk in the operational technology (OT) environment.

Previous to Siemens, Ian was a senior partner at Mosaic Strategies, a cyber security executive advisory firm, and a senior cyber security strategist at Booz Allen Hamilton.

For more than 20 years, Ian has worked with myriad senior executives to understand, anticipate, and adapt to constantly changing cyber threats. In fact, he began his career working with world renowned futurist, Alvin Toffler, helping organizations adapt to their future digital environments. As a speaker and author with a passion for helping senior leaders understand cyber risks, Ian explores how cyber security is a 21st century business imperative.

Ian graduated from Cornell University with degrees in Economics and English.

Automation

| December 2018

27

2nd ISA Malaysia Section Event 2018

Turbomachinery Controls Day 2 (6th December) 11:00 AM – 12:30 PM

Track Chair Ir. Surendran Kandasamy Principal Engineer, Machinery Control PETRONAS Surendran has more than 15 years of experience in the field of Instrumentation and Control specializing in the field of Machinery Control. He is a certified TUV Functional Safety Engineer and a Professional Engineer registered with the Board of Engineers Malaysia.

He started his career in 2002 as an Instrument and Controls Engineer at MTBE Malaysia Sdn Bhd, a petrochemical facility owned by PETRONAS. He subsequently moved to PETRONAS Group Technical Solutions in 2010 where he still serves as a technical consultant.

In his role, he provides consultancy on design, specifications and troubleshooting to PETRONAS operating units and projects. His expertise and passion is predominantly in the areas of Turbomachinery Control Systems, Functional Safety Assessments and Process Control Optimization. He is also actively involved in standards development and coaching of young engineers in PETRONAS.

Speakers Alan Wong Technical Consulting Engineer Compressor Controls Corporation Presentation: Start Project off on the Right Foot – Combating Compressor Piping & Instrumentation Design Mistakes Alan Wong is the Technical Consulting Engineer of Compressor Controls Corporation, based in Singapore. His fourteen years of experience in turbomachinery controls encompasses a range of oil & gas upstream/downstream processes. His responsibilities include studying customers’ processes & turbomachinery control systems, developing safe & energy-efficient solutions, and providing technical support to the region. He holds a MS Degree in Chemical Engineering from the University of Utah, U.S.A.

Mohamed Abousalem Regional Commercial Leader Compressor Controls Corporation Presentation: Synergetic Optimization of Process and Turbomachinery Controls Mohamed Abousalem joined Compressor Controls Corporation (CCC) in Singapore in 2016 as the Asia Pacific Commercial Leader, responsible for business development support, proposal generation, terms & conditions and commercial negotiation. He graduated from Cairo University of Egypt with a Bachelor’s Degree in Mechanical Power Engineering in 2010. He joined Uhde ThyssenKrupp as a Process Piping Engineer in 2011 and Invensys as a Turbomachinery Control Engineer in 2012, participated in projects in Middle East, Qatar, Philippines and Singapore as a Project Engineer and Site Commissioning Engineer before joining CCC.

28 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Martijn Bemmelmans Control Specialist CONTROL-CARE B.V Presentation: Plant DCS Based Turbomachinery Controls 18 years of (field) experience has proven to be a solid base to design and implement integrated turbomachinery control application for Distributed Control Systems (“DCS”) platforms.

• > 2006 Control-Care Engineering and execution: applying control strategies on DCS platforms for the industry, world-wide • 2000 – 2006 Compressor Controls Corporation Field Services • 1999 MSc Electrical engineering and Controls, Eindhoven University of Technology Course and Knowledge: • Honeywell PKS Experion C300 • CCC Series 3+/3++/5/Vantage/Guardian • Allen Bradley ControlLogix5000 PLC’s • Siemens S7-300/400 PLC’s • WinCC, RSView, Iconics, Trainview HMI systems • Bently Nevada 3500 and System 1 vibration monitoring systems • Valmet DNA, Honeywell Experion DCS’s • Design rotating equipment control systems (including compressor antisurge and performance control, steam turbine speed control and gas turbine fuel control)

Mohd Azrul Adha B Mohd Sohaimi Machinery Control Engineer PETRONAS Presentation: Upgrading Obsolete Gas Turbine Control Panels – What To Look Out For as the End User?

Mohd Azrul Adha is a senior machinery and control engineer with 10 years experience in PETRONAS. He has vast experience in projects from FEED phase, to detail design, construction and commissioning phase. He led several projects for upstream and also downstream for PETRONAS facility in Malaysia and also abroad. He also involved with technical consultancy for machinery control and other instrument and control related issues for PETRONAS facilities.

Automation

| December 2018

29

2nd ISA Malaysia Section Event 2018

Advanced Process Control & Optimization Day 2 (6th December) 1:30 PM – 3:00 PM

Track Chair Prakash Kumar Karunakaran Custodian Engineer for Advanced Process Control PETRONAS Prakash Kumar Karunakaran is the Custodian Engineer for Advanced Process Control (or APC) in PETRONAS. He has been in the Oil and Gas industry for 25 years.

He started his career as an Instrumentation Engineer before transitioning to Process Engineering (Advanced Process Control) in the third largest Liquefied Natural Gas (LNG) plant in the world (PETRONAS LNG Complex, Bintulu). While in this facility, his role included development and maintenance of complex regulatory controls for the largest aerodynamic compressors and fired equipment in Malaysia. As the first local Head of Advanced Process Control (APC), he was also responsible for initiating the development of Advanced Control applications in the LNG Complex.

After 13 years in LNG, he moved to Malaysia’s largest Crude Oil refinery (PETRONAS Penapisan (Melaka) Sdn. Bhd.) as Head, Advanced Process Control and Optimisation. He was responsible for revamping all the Advanced Solutions in this facility and for revamping the plant data acquisition system to better facilitate enhanced data analytics.

In 2000, he made another transition to Group Technical Solutions (GTS), Kuala Lumpur, a central engineering consultancy for PETRONAS Operating Units and Capital Projects. In this role, he provides consultancy for Advanced Control Solutions, Plant Data Acquisition and Advanced Analytics.

He is the PETRONAS Group Technical Authority (GTA) for all Advanced Control Solutions and for Plant Data Acquisition systems. He is also the Discipline Head for the APC discipline in PETRONAS (Skill Group 16.4).

His greatest passion is in capability building and has trained more than 700 engineers to leverage on improved Process Behavior Management© using the field of (Advanced) Process Control and data analytics.

Speakers Abdul Rahman Mustapha Senior Manager – Oil, Gas & Chemical ABB Malaysia Sdn. Bhd. Presentation: Innovation to Process Control System with Digitalization

30 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 David Lincoln Digital Lead ABB Presentation: Digital Technologies for Reliable Operation and Maintenance of Measurement Devices David Lincoln, ABB Digital Lead for Measurement and Analytics, drives digital transformation for ABB’s wide-ranging sensing business which includes analyzer, instrumentation and force measurement solutions.

Previously, David oversaw service productization and product management for this business. As Technology Manager, he set up the Measurement and Analytics development center in China and supported its growth for five years.

David holds a Master’s degree in Mechanical Engineering from the University of Manchester in England and a Ph.D from Cardiff University in Wales. He is based in the UK.

Azmeer Abdullaziz Technical Lead Advance Gas Turbine Solutions Sdn. Bhd. Presentation: Performance Evaluation Of Centrifugal Compressor Azmeer Abdullaziz is a Technical Lead within Advance Gas Turbine Solutions (AGTS), a Siemens joint-venture company in Malaysia. He provides technical support and remote diagnostic for Siemens gas compressor package installed for Malaysia oil and gas companies.

Azmeer received his Bachelor of Science in Mechanical Engineering from Kanazawa University, Japan and Master of Science in Thermal Power from Cranfield University, UK.

Kwok Hong, Hor (KH) Asia Pacific General Manager Controls & Condition Monitoring Baker Hughes, a GE Company (BHGE) Presentation: Plantwide Monitoring KH leads the Controls & Condition Monitoring for BHGE in Asia Pacific. In this role, he is responsible for the overall business growth and operations for the Bently Nevada and Control Solutions product lines.

KH has been with BHGE for 14 years joining the company through finance and then moving to GE’s leadership development organization; Corporate Audit Staff where he spent time in US, Japan, UK, Italy, India, Singapore across the Capital, NBC Universal and Oil & Gas businesses.

He has been with the Oil & Gas industry for 10 years and held positions in the Upstream Exploration & Production and Digital Solution Asia Pacific businesses.

KH holds a Bachelor of Commerce degree from the University of Melbourne, Australia. He is based in Singapore.

Automation

| December 2018

31

2nd ISA Malaysia Section Event 2018

Automation System Obsolescence and Life Cycle Management Day 2 (6th December) 3:30 PM – 5:15 PM

Track Chair Mohd Rashdan Mahmood Custodian (I & C Upstream) and Business Technical Authority (Instrument & Control) PETRONAS Rashdan is currently Custodian and Business Technical Authority (Instrument & Control) for PETRONAS Upstream. He is also the Team Leader for Project SAINT, tasked to ensure the integrity of all safeguarding instrumentations in Upstream Petronas.

In PETRONAS, he has been instrumental in introducing specialized safety initiatives such as IPF and 3D Fire & Gas Mapping, culminating with PETRONAS’ own software P-IPF and 3D FnGMap. He has also the Alternate Chairman for SIRIM Malaysia Standards focusing on adoption of IEC 61508 and IEC 61511.

He is now the Technical Advisor for Project PRiME, addressing PETRONAS Upstream needs for a predictive approach in instrument reliability & availability, as part of Digitalization efforts in PETRONAS. He has also appointed to transform technical learning through digitalization for instrumentation group, the first to be sandbox tested in PETRONAS before rolling out in 2019.

Speakers Dion Phandu Technical Manager – Distributed Control System BASF PETRONAS CHEMICALS SDN. BHD. Presentation: Managing Software Obsolescence To Sustain Automation System Expected Life Time Dion graduated from Bandung Institute of Technology (ITB) in Electrical Engineering (Control System). He started his career in project engineering in 2008 and specialized in distributed control system as he joined Honeywell later in his career.

He moved to Honeywell Malaysia in 2012.

Currently he is part of automation team for BASF PETRONAS Chemical Sdn. Bhd as Distributed Control System technical lead.

Chung Hong Hong Regional Sales Development Manager Siemens Pte Ltd Presentation: Ensuring Serviceability and Optimization of Plant Availability Chung Hong Hong is a Certified Functional Safety Expert (CFSE) and a Siemens Functional Safety Professional (SFSP). He has more than 20 years of working experience in designing, engineering, implementing and commissioning PLC/SCADA, Process Control Systems (PCS), Safety Instrumented Systems (SIS) and Fire & Gas Detection System (FGS) primarily for the Oil & Gas and Petrochemicals industries. He has also been involved in the HAZOP/CHAZOP studies and SIL selection/verification works.

Currently working as a Regional Sales Development Manager covering the South-East Asia region, he is knowledgeable and experienced in promoting the Industry 4.0 / IoT technology for adoption and implementation of the new technology to customers in the process automation industries.

32 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Vicknendran Krishna Younee Vice President, Head of GTM PS CD South East Asia Siemens Malaysia Sdn Bhd Presentation: AI Based – Autonomous Equipment Health Monitoring System Vick is leading the Go-to-Market for Digitalization Asia, for the Power Services Division and Head of Go-to-Market for the Control & Digitalization Unit for South East Asia. He brings along over 20 years of experience in the field of Controls & Instrumentation and in the last 3 years intensified focus on the Digitalization arena.

His area of expertise predominantly is in Controls & Instrumentation (with an increasing prominence in Digitalization) and as well as in clean energy project development. Vick has a B.Eng (Hons) in Chemical Engineering from the University of Malaya, Member of Institute of Engineers’ Malaysia and a registered Professional Engineer (P.Eng) In Chemical Engineering with Board of Engineers’ Malaysia.

Sherman Tng Regional Sales Manager SpectraSensors Presentation: On-line Monitoring of H2O in Natural Gas at the Outlet of Molecular Sieve Dryer Vessels Using Tunable Diode Laser Absorption Spectroscopy (TDLAS) Analyzers Sherman Tng is the Regional Sales Manager at SpectraSensors. He is responsible for the business development in Asia Pacific, application of tunable diode laser absorption spectroscopy (TDLAS) and Raman analyzers in the hydrocarbon processing industries (refining, petrochemicals, LNG, natural gas processing and syngas). He has 25+ years experience with liquid and gas analytical products within the Instrumentation and Control in the Oil & Gas industry – including 15 years of hands-on regional business development and strategic planning experience.

Michele Ferrante Engineering Manager VSI Controls Presentation: A More Efficient Approach to Control Valve Maintenance Michele is a Politecnico di Milano honours graduate in Mechanical Engineering.

He began his career in the automotive industry and spent the last 10 years as engineering and R&D manager in leading companies in the control valves industry.

Michele is the technical heart of VSI Controls; his task is to follow the development of all the products, assisting the client in solving any technical query.

Automation

| December 2018

33

Emerson Automation Solutions

2nd ISA Malaysia Section Event 2018Endress+Hauser (Tenaga) Sdn Bhd

Exhibitor Locator

B3 C5

FOXBORO (MALAYSIA) SDN. BHD.

A6

Global Security Network

C3

HIMA ASIA PACIFIC PTE LTD

B5

HONEYWELL PROCESS SOLUTIONS

B9

ABB Malaysia Sdn. Bhd.

B2

IMI Precision Engineering

C2

Baker Hughes, a GE company

A3

Inland Oil and Gas Instruments Sdn Bhd

C1

Beckhoff Automation Sdn Bhd

B15

i.safe MOBILE GmbH

A5

BFI Automation Mindermann GmbH

B11

PAS Global LLC.

B10

Brix Engineering Pte Ltd

B14

REXA Inc.

A2

COMPRESSOR CONTROLS CORPORATION

A1

Siemens Malaysia Sdn Bhd

B1

Control-Care

B6

Trisystems Engineering Sdn. Bhd.

A7

Crealogy Sdn Bhd (1087081-D)

B12

TURCOMP ENGINEERING SERVICES SDN BHD

C4

Emerson Automation Solutions

B3

TÜV SÜD Asia Pacific Pte Ltd

B13

Endress+Hauser (Tenaga) Sdn Bhd

C5

Unicon System Co., Ltd.

A4

FOXBORO (MALAYSIA) SDN. BHD.

A6

Vector Infotech Sdn Bhd

B7

Global Security Network

C3

VSI Controls

B8

HIMA ASIA PACIFIC PTE LTD

B5

Yokogawa Kontrol (M) Sdn Bhd

B4

HONEYWELL PROCESS SOLUTIONS

B9

IMI Precision Engineering

C2

Inland Oil and Gas Instruments Sdn Bhd

C1

i.safe MOBILE GmbH

A5

PAS Global LLC.

B10

REXA Inc.

A2

Siemens Malaysia Sdn Bhd

B1

Trisystems Engineering Sdn. Bhd.

A7

TURCOMP ENGINEERING SERVICES SDN BHD

C4

TÜV SÜD Asia Pacific Pte Ltd

B13

Unicon System Co., Ltd.

A4

Vector Infotech Sdn Bhd

B7

VSI Controls

B8

Yokogawa Kontrol (M) Sdn Bhd

B4

34 Automation

| December 2018

2nd ISA Malaysia Section Event 2018

Event Floorplan Sapphire Ballroom B15

B14

B12

B13

B11

B10

B8

B9

B7

B6

TriSystems

llroom

A7

ICS Cybersecurity. Safety. Compliance.

A6

C5

A5

C4

A4

B4

B5 C3

B3 A3

A2

C2 B2

B1

C1

A1

Conference Room

Exhibition

Lunch Automation

| December 2018

35

2nd ISA Malaysia Section Event 2018

Exhibitors Profiles ABB Malaysia Sdn. Bhd. Contact Person: John Lee Address: Lot 608, Jalan Lagoon Selatan, Bandar Sunway 47500 Subang Jaya, Selangor, Malaysia Telephone Number: +603 - 56284475 Mobile Number: +6012 - 3990032 Website: http://new.abb.com/products/measurement-products Email: John.lee@my.abb.com Sponsor Type: Platinum Sponsor Stand Number: B2 ABB Malaysia Sdn Bhd is part of the ABB Group, a pioneering technology leader that works closely with utility, industry, transport and infrastructure customers in roughly 100 countries. With more than four decades at the forefront of digital technologies, ABB is a leader in digitally connected and enabled industrial equipment and systems with an installed base of more than 70,000 control systems connecting 70 million devices.

ABB’s history in Malaysia began when the first power generator was installed in 1904 by MFO Oerlikon. Today, we are deploying the competitive advantage of ABB’s R&D strength, global experience and technical know-how with local customer interface, production and engineering capabilities to help customers capitalize on the efficiency and performance improvements that digitalization delivers.

Baker Hughes, a GE company Contact Person: Mohamed Suffian Yusoff Address: Warehouse 7 Door 1 Kemaman Supply Base Kemaman 11 24007 MY Telephone Number: +60 356229242 Mobile Number: +60 122812102 Website: www.bhge.com Email: MohamedSuffian.Yusoff@bhge.com Sponsor Type: Gold Sponsor Stand Number: A3 BHGE is the world’s first and only full stream provider of integrated oilfield products, services and digital solutions.

We deploy minds and machines to enhance customer productivity, safety and environmental stewardship, while minimizing costs and risks at every step of the energy value chain. With operations in over 120 countries, we infuse over a century of experience with the spirit of a startup – inventing smarter ways to bring energy to the world.

BHGE’s ground breaking Bently Nevada technology encompasses rack-based and distributed machinery condition monitoring software and hardware solutions, vibration monitoring equipment and sensors that enable greater asset reliability and enhanced efficiency for your operations, are backed by an expert global support system. Unexpected machinery failure is expensive. It results in unplanned downtime and can cause secondary failures to other machine components, which can create HSE (Health, Safety and Environment) risk. Bently Nevada is leading the charge to minimize machine failure and keep your projects moving forward.

36 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Beckhoff Automation Sdn Bhd Contact Person: Rosmawati Address: Beckhoff Automation Sdn Bhd (889044-H) Unit 2.1, 2nd Floor, Surian Tower, No. 1, Jalan PJU 7/3, Mutiara Damansara, 47810 Petaling Jaya, Selangor, Malaysia.

Telephone Number: 03-77318388 Website: www.beckhoff.com.my Email: RosmawatiA@beckhoff.com.my Sponsor Type: Exhibitor Stand Number: B15 Beckhoff provides a lean, system-integrated alternative to traditional process industry suppliers. Through the consistent consolidation of control intelligence in automation software and established standard technologies from the fields of IT and automation, PC-based control combines all functions such as PLC, measurement technology and motion control into one powerful system. Beckhoff also supplies components from the controller to intrinsically safe I/Os for demanding applications in the process industries. With an extensive range of explosion-proof components, Beckhoff provides comprehensive solutions for barrier-free system integration right into Zone 0/20. These include EtherCAT Terminals with intrinsically safe I/O interfaces from the ELX series, along with Control Panels and Panel PCs of the highest build quality from the CPX series as well as updates to TwinCAT control software with specific process technology interfaces. For new plants, explosion protection can be directly integrated into the overall control system architecture; for existing plants, the Beckhoff PC-based control platform can simply be extended. Beckhoff also covers all common standards in the industry by connecting via process technology protocols such as HART, NAMUR and FDT/DTM. With products for explosion protection and corresponding software interfaces in TwinCAT, Beckhoff offers a lean, system-integrated alternative to traditional process industry suppliers.

BFI Automation Mindermann GmbH Contact Person: Jens Michael Mindermann Address: Ruegenstrasse 7, D – 42579 Heiligenhaus Telephone Number: +49 2056 98946 - 0 Mobile Number: +49177 8968222 Website: www.bfi-automation.de Email: info@bfi-automation.de Sponsor Type: Exhibitor Stand Number: B11 BFI Automation Mindermann GmbH, offers solutions for industrial flame monitoring. Along with the company BST Solutions GmbH, which was founded in 2004, is covering the complete range for flame monitoring, starting from household burners up to burners for industrial combustion plants, as well as refineries, gas turbines and Power Stations.

The provided SIL3 certified flame monitoring equipment is for all kind of combustions. Our compact flame controller CFC comes with UV, IR & UV+IR sensors, communication via RS485 bus, high performance “1Hz discrimination”, SD-card recorder, analyzing software and more.

All devices in the BFI portfolio continue to be developed, manufactured and tested in the main plant in Heiligenhaus.

Automation

| December 2018

37

2nd ISA Malaysia Section Event 2018 Brix Engineering Pte Ltd Contact Person: Dr. Bijal Sanghvi Address: 190, Middle Road, #16-01, Fortune Centre , Singapore-188979 Mobile Number: +65 9446 2236 Website: www.brixengg.com Email: sales@brixengg.com Sponsor Type: Exhibitor Stand Number: B14 Safe/Ex-HVAC Axis HVAC is a complete custom design and engineered package meeting NFPA 496 standards It provide solutions to suit your specific application including, air conditioning, heating, pressurization, barometric dampers, duct work, stack, grills and filters with full integration / adjustment control at site. Suitable to Zone 1&2, IIB + H2, T3 Air conditioning Unit / Ex-proof AC/ Axis offer Safe Area (CE approve) and Hazardous Area AC (suitable to Zone 1&2, IIB + H2).

Distribution: Buhler Technologies GmbH : Gas Analysis products specifically designed for sample conditioning systems like Sample probes, Sample pumps, Sample Coolers, Condensate Removal, Sample Filters, Moisture Detectors, Flow meter, NOx converter, Portable Analyser, Gas Conditioning System, Particle Monitor, Peristaltic Pump. Components also available for Flameproof Area.

Axis India : Pressure Regulation like Pressure Regulator, Auto Changeover Regulator, Dual Stage Cylinder Pressure Regulator, Inline Relief Valve, Non Return Valve, Relief Valve-Adjustable, Back Pressure Regulator.

Thermal Components like Ex-proof HVAC, Safe/Ex-proof AC, Peltier AC, Vortex Cooler SWAS components like Sample Cooler, Direct Acting Pressure Reducing Valve, Auto Shut Off valve, Sight Flow Indicator, Cation Column, Composite Manifold (Patented)

COMPRESSOR CONTROLS CORPORATION Contact Person: Brian Chan Address: 10 Eunos Road 8, #12-06, Singapore Post Centre, Singapore 408600 Telephone Number: (+65) 6408 6220 Mobile Number: (+65) 9173 8173 Website: www.cccglobal.com Email: bchan@cccglobal.com Sponsor Type: Gold Sponsor Stand Number: A1 CCC (Compressor Controls Corporation) is the leader in Turbomachinery Train Optimization Services for the upstream, midstream and downstream Oil & Gas industry. Process, controls, safety & technology engineers, and plant managers optimize plant efficiency every day utilizing CCC’s expertise. Since 1974, more than 37,000 installations have benefitted from more than two billion hours of CCC’s operational experience. This expertise is executed in a comprehensive platform of hardware, software and consulting services that optimize turbomachinery to improve process performance, increase yield, save energy, reduce downtime and enhance plant safety & security. CCC’s optimization services are technology-agnostic. No other controls or automation provider can serve your needs better with local support and a legacy of proven results Headquartered in Des Moines, Iowa – USA and with offices located across the globe, we have strategically positioned our specialists to provide an unparalleled level of expertise, optimization consultation, and customer support close to our client base.

38 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Control-Care Contact Person: Martijn Bemmelmans Address: Kabelweg 37, 1014 BA Amsterdam, The Netherlands Telephone Number: +31 20 637 6801 Mobile Number: +31 6 467 11 386 Website: www.control-care.com Email: info@control-care.com / mbemmelmans@control-care.com Sponsor Type: Exhibitor Stand Number: B6 Control-Care is a company that specializes in turbomachinery and other industrial control systems and offers both systems as well as services to customers in oil and gas, chemical, petrochemical and power generation industries.

Control-Care works for and together with turbomachinery OEMs, engineering contractors and end-users to design entirely new control systems or to rejuvenate existing control systems (“refits�), provides field services, troubleshooting services and tailor-made training at site.

Control-Care’s committed engineering staff covers an extensive and in-depth engineering experience on a wide range of turbomachinery control and monitoring systems and covers all major (and also third party supplied) control systems. The company employs qualified, certified and experienced engineers.

Our ambitious targets include growth, maintain highest industry standards and being a fully independent company for any kind of turbomachinery controls challenge.

Crealogy Sdn Bhd (1087081-D) Contact Person: Firdaus Taufik Address: Unit 207, 2nd Floor, Block A Damansara Intan, Jalan SS 20/27 SS20, 47400 Petaling Jaya, Selangor Telephone Number: 603 7733 0202 Mobile Number: 6017 3000 669 Website: www.crealogy.com.my Email: firdaus@crealogy.com.my Sponsor Type: Exhibitor Stand Number: B12 Crealogy Sdn Bhd is an experienced partner to help you with your technology requirement, allowing you to focus on what matter most; growing your business. We customize from idea to realization understand requirement and delivering solutions that meet business objective with conceptual design & feasibility study, front end engineering design, technology consulting and future workforce. We satisfy our clients by understanding their requirement, conduct feasibility study, technology matchup to design conceptualization, technical requirement, execution planning, project scoping, commercial analysis and detailed design, Professional industry expert on: Disruptive technology, industry standards, system integration, digital solution, and provide manpower services helping business to reshape to agile workforce.

Automation

| December 2018

39

2nd ISA Malaysia Section Event 2018 Emerson Automation Solutions Contact Person: Hasnizam Abdullah Address: No. 1 Block A Jalan SS13/5, Selangor Darul Ehsan 47500 Subang Jaya, Malaysia Telephone Number: +60 3562 42942 Mobile Number: +60 12 201 5645 Website: www.emerson.com Email: Hasnizam.Abdullah@Emerson.com Sponsor Type: Gold Sponsor Stand Number: B3 Emerson Automation Solutions is a global technology and engineering company helping process, hybrid, and discrete manufacturers to maximize production, protect personnel and the environment while optimizing their energy and operating costs.

Our automation expertise – from projects to operations – is focused on helping manufacturers achieve top quartile business performance through the industry’s broadest portfolio of technologies to measure, control, optimize and power their operations.

Emerson offers the expanded PlantwebTM digital ecosystem, a scalable portfolio of standards-based hardware, software, intelligent devices and services for securely implementing the Industrial Internet of Things (IoT) with measurable business performance improvement.

To accelerate digital transformation for industrial customers across Asia Pacific, Emerson recently opened four Solutions Centers at its Singapore APHQ; China and South Korea location. Visitors to these centers will be able to experience digital transformation in a plant-like environment and discover new ways of working in a digitally transformed plant.

We have the most complete automation portfolio in the industry with the depth of services to back it up. Our network of global industry centers and industry and application experts take on the toughest challenges.

Anytime. Anywhere.

Endress+Hauser (Tenaga) Sdn Bhd Contact Person: Ng Ching Ching Address: No.27, Jalan Penaga 8/KS6, Bandar Botanik, 41200 Klang, Selangor Telephone Number: 03-78433888 Website: www.my.endress.com Email: infomy@my.endress.com Sponsor Type: Bronze Sponsor Stand Number: C5 Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. We provide sensors, instruments, systems and services for level, flow, pressure and temperature measurement as well as analytics and data acquisition. We support customers with automation engineering, logistics and IT services and solutions in optimizing their processes in terms of reliability, safety, economic efficiency and environmental impact.

From exploration to refinery, from storage to distribution, from plant upgrades to new projects, we have the application expertise to help you succeed.

At a time when the sector faces skills shortages and regulations tightening, our organization is here across the full life cycle of your project always with your deadlines in mind.

While complexity of facilities and processes are ever increasing, and downtime must be reduced, your competitiveness is enhanced with reliable, accurate and traceable asset information. In short, you need to do more with less, benefiting from a stable partner who is here for the long haul and ready across the globe, offering: • Assured plant safety • Optimized return on investment • Best-fit products, solutions and services

40 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 FOXBORO (MALAYSIA) SDN. BHD. Contact Person: Nur Aida Marzila Ahmad Zamzuri Address: Suite 1.01A, Mercu Picorp, Lot 10, Jalan Astaka U8/84 Bukit Jelutong, 40150 Shah Alam, Selangor Telephone Number: +603-78454588 Mobile Number: +60125271447 Website: www.foxmay.com.my Email: aida@foxmay.com.my Sponsor Type: Exhibitor Stand Number: A6 Foxboro malaysia markets range of control systems for most industries from our intelligent automation products to instrumentation and scada systems. Our employees support foxboro’s entire process control products including design, engineering, fabrication, integration, commissioning, training and maintenance. Foxboro provides products and services in a wide variety of industries which includes oil & gas, power, pulp & paper, food & beverages as well as water and wastewater.

Global Security Network Contact Person: Roula Khabbaz Address: PO BOX 41301 Abu Dhabi, UAE Telephone Number: 00 971 2 6674782 Website: www.gsn.ae Email: roula@gsn.ae Sponsor Type: SiIver Sponsor Stand Number: C3 Global Security Network (GSN) is a UAE based, French-owned company, with more than 17 years of experience in delivering high-end IT Security projects in the Middle East. GSN focuses on integrating specialized IT Security solutions for customers like governmental entities, Critical Infrastructure, Nuclear Power Plants and Oil & Gas in the Middle East.

GSN is the only Value-Added Distributor of Fox-IT, Netherlands, in the Middle East. GSN is proud to distribute the Fox Data Diode, the leading European one-way gateway solution to enforce Confidentiality while connecting networks of different Security levels, for National Security, SCADA, and ICS/DCS applications. The Fox Data Diode is the only product in the world certified EAL7+ by the Common Criteria or ISO/IEC 15408. The Fox Data Diode is approved for use up to and including NATO SECRET (NS).

GSN also provides Cyber Security Consulting such as Auditing, Cyber Security Risk Management for IT and ICS/ DCS/SCADA systems, Cyber Security Incident Management, Vulnerability Assessment and Penetration Testing. We are very proud to have designed and implemented the rst Information Security Risk Management Framework for ICS/ DCS/SCADA systems compliant with ISA/IEC-62443 (formerly ISA- 99).

HIMA ASIA PACIFIC PTE LTD Contact Person: Nelson/Kenneth Address: 10 ubi cresent #07-55 Ubi techpack C Singapore 408564 Telephone Number: +65 6635 2719 Website: www.hima.com Email: Nelson.chan@hima.com Sponsor Type: Silver Sponsor Stand Number: B5 From a marine engineering office in imperial Mannheim to a leading global provider of safety solutions in a digitally connected world. Learn about the history of HIMA Paul Hildebrandt GmbH and the milestones spanning four generations of a family business full of passionate safety specialists.

Automation

| December 2018

41

2nd ISA Malaysia Section Event 2018 HONEYWELL PROCESS SOLUTIONS Contact Person: Nilesh Joisar Address: UOA Corporate Tower, Avenue 10, The Vertical, Kuala Lumpur Telephone Number: +60327773523 Mobile Number: + 60123356122 Website: www.honeywellprocess.com Email: Nilesh.Joisar1@honeywell.com Sponsor Type: Exhibitor Stand Number: B9 Honeywell Process Solutions (www.honeywellprocess.com) is a pioneer in automation control, instrumentation and services for the oil and gas; refining; energy; pulp and paper; industrial power generation; chemicals and petrochemicals; biofuels; life sciences; and metals, minerals and mining industries. It is also a leader in providing software solutions and instrumentation that help manufacturers find value and competitive advantage through Honeywell Connected Plant, Honeywell’s Industrial Internet of Things (IIoT) solution. Process Solutions is part of Honeywell’s Performance Materials and Technologies strategic business group, which also includes Honeywell UOP (www.uop.com), a leading international supplier and licensor of process technology, catalysts, adsorbents, equipment, and consulting services to the petroleum refining, petrochemical, and gas processing industries.

IMI Precision Engineering Contact Person: CM Peng Address: 24, Jalan Serendah 26/39, Seksyen 26, 40700 Shah Alam Selangor Malaysia Telephone Number: +60 (0) 3 5614 2880 Mobile Number: +60 (0) 12 969 0581 Website: www.imi-precision.com Email: cm.peng@imi-precision.com Sponsor Type: Gold Sponsor Stand Number: C2 IMI PRECISION ENGINEERING - We are a world leader in motion and fluid control technologies. Wherever precision, speed and engineering reliability are essential, we deliver exceptional solutions which improve the productivity and efficiency of our customers’ equipment.

As a business, we aim to understand our customers’ challenges. We then connect our products, people and expertise in order to deliver exceptional service and solutions. These improve the performance of our customers’ machinery.

We call this Engineering GREAT, and we deliver it to customers through a world-class portfolio of high performance products, through close partnerships and problem-solving, and through a global network of support which ensures reliable local delivery, all over the world.

Part of IMI plc, we have a sales and service network in 50 countries, as well as manufacturing capability in the USA, Germany, China, UK, Switzerland, Czech Republic, Mexico, India and Brazil. We support this with our global centres of technical excellence, and facilities for CFD design and R&D testing. We employ a dedicated team of field engineers, sector specialists and key account managers – all committed to providing excellent service to our customers.

42 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Inland Oil and Gas Instruments Sdn Bhd Contact Person: Ahmadnur Mokhtar Address: 23, Jalan Juruanalisis, U1/35, Hicom Glenmarie Industrial Park, 40000, Shah Alam, Selangor, Malaysia Telephone Number: +603 5569 3099 Mobile Number: +6016 2232 111 Website: Inland.com.my Email: ahmadnur@inland.com.my Sponsor Type: Gold Sponsor Stand Number: C1 Inland Oil and Gas is a leading supplier of instrumentation product in Malaysia. We are distributor of Parker Hannifin USA which manufactures fittings for vacuum, 6,000 psig up to up to 150,000 psig, valves and DBB. Our range of manifolds are complete for all transmitter and gauge applications. All our product comes in s/steel and higher grade material such as Monel, Incolloy, Inconnel, Hastelloy and more. We are also the authorized distributor for Sandvik tubing. On top of that we also have a comprehensive range of hydraulic products such as hoses, quick couplers, actuator and accumulators. Our range also include other instrumentation products such as level, pressure and temperature instrument.

Inland’s office is based on a Parker store concept of convenient store. We have 20 highly trained and experienced personnel ready to assist you 7 days a week, 24 hours a day. More than 3000 parts are in stock which covers all major sizes and configurations. Premier Customer Service, that is our goal. i.safe MOBILE GmbH Contact Person: Martin Haaf Address: i_Park Tauberfranken 10, 97922 Lauda-Koenigshofen, Germany Telephone Number: 0049 9343 601480 Website: www.isafe-mobile.com Email: info@isafe-mobile.com Sponsor Type: Exhibitor Stand Number: A5 i.safe MOBILE GmbH, based in Germany is one of the world’s leading and most innovative developers of mobile communication devices such as mobile phones, smartphones, tablet PCs etc. for safe use in hazardous areas and for robust use in industry and outdoors. Engineers and specialists at the Lauda-Königshofen site develop practice-oriented products and individual, customer-specific software solutions based on legal regulations such as ATEX, IECEx... The i.safe MOBILE development team incorporates all international standards into product development and is itself an active member of corresponding standardization committees. In order to meet all explosion protection requirements, the products are developed from scratch. This gives customers worldwide the certainty of using high-quality communication technology at the latest technical level. In addition, i.safe MOBILE cooperates with solution providers in the areas of push-to-talk or lone worker in order to be able to offer complete solutions from a single source.

PAS Global LLC. Contact Person: Nur Misuari Abd Rahman – Sales Manager - SEA Address: Kuala Lumpur Telephone Number: +60123474737 Mobile Number: +60123474737 Website: www.pas.com Email: mrahman@pas.com Sponsor Type: Exhibitor Stand Number: B10

ICS Cybersecurity. Safety. Compliance.

Founded in 1993, PAS is a leading provider of software solutions for ICS cybersecurity, process safety, and asset reliability to the energy, process, and power industries worldwide. PAS solutions include industrial control system cybersecurity, automation asset management, IPL assurance, alarm management, high performance HMI™, boundary management, and control loop performance optimization. PAS solutions are installed in over 1,380 facilities worldwide in more than 70 countries. PAS was recently named the #1 Global Provider of Safety Lifecycle Management by ARC Advisory Group including #1 rankings within Chemical, Power Generation, Refining, and Oil & Gas. For more information, visit www.pas.com. Connect with PAS on Twitter @PASGlobal or LinkedIn. Automation

| December 2018

43

2nd ISA Malaysia Section Event 2018 REXA Inc. Contact Person: Neil Isreb, International Sales Manager Address: 4 Manley Street, West Bridgewater, MA 02379 Telephone Number: 508-436-6537 Mobile Number: +15089301717 Website: www.rexa.com Email: nisreb@rexa.com Sponsor Type: Exhibitor Stand Number: A2 The Rexa Xpac Actuator is a Self-contained, micro-processor based electro-hydraulic actuator specifically designed for repeatable, continuous duty modulating service.

REXA Electraulic™ Actuators are used on many applications to improve control performance and provide ideal solutions for strict environmental requirements. With fail-safe capability, surge options, Class Division 1 and 2 approvals, wide ambient temperature ranges and efficient power consumption, REXA actuators are ideal for a wide range of applications in many harsh environmental conditions.

Why REXA? • Self-contained electraulic technology • Immediate signal response • 100% modulating duty cycle • Rugged design and construction • Minimal maintenance • High torque or thrust in a compact package • Fail-safe capable • Linear, rotary, and drive configurations • Adaptable for most valve, damper, or motion control application REXA Application & Installation at Oil & Gas Industries • Pressure Control • Flow Control • Suction/Discharge • Surge Control • Injection/Withdrawal • Fuel Gas • Inlet Guide Vane • Metering Valves/Custody Transfer • Tank level control • Damper • Governor Control

Siemens Malaysia Sdn Bhd Contact Person: Goh Yuen Huey Address: Level 1 Reception, CP Tower, No 11, Jalan 16/11, Pusat Dagang Seksyen 16, 46350. Petaling Jaya, Selangor Darul Ehsan. Malaysia.

Telephone Number: +60 (3) 7952 5237 Mobile Number: +60 (12) 2439425 Website: www.siemens.com.my Email: Yuen-huey.goh@siemens.com Sponsor Type: Titanium Sponsor Stand Number: B1 Siemens Malaysia is a leading technology provider with comprehensive products and solutions for various sectors like Power & Gas, Power Generation Services, Energy Management, Building Technologies, Mobility, Digital Factory, Process Industries & Drives and Healthcare. It has contributed to landmark Malaysian projects like the Klang Valley MRT, ERL Express city-airport connection, and power plants. Globally, Siemens AG (Berlin and Munich) is a technology powerhouse with engineering excellence, innovation, quality and reliability for over 170 years.

44 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 Trisystems Engineering Sdn. Bhd. Contact Person: Megat Shamsul Ariff B. Megat Khamaruddin Address: 6 Jalan Tiang U8/91, Sek. U8, 40150, Shah Alam, Selangor D.E. Telephone Number: +603-78473278 Mobile Number: +6016-2132484 Website: www.trisys.com.my Email: megat@trisys.com.my Sponsor Type: Exhibitor Stand Number: A7

TriSystems

Trisystems Engineering Sdn. Bhd. is a system integrator company that is part of Schneider Electric Alliance Partnership and AVEVA Software Partner Community. Trisystems Engineering Sdn. Bhd. is well known for innovative solution with proven track record of various project implementation using technology provided by AVEVA in Asset Performance, Monitor & Control products such as IMS, SCADA, HMI and Analytics. Trisystems is the complete and up to date Main Automation Contractor (MAC) offering customers the best value for Automation, Integrated Operation, IIOT, Process Safety and Analytics projects.

TURCOMP ENGINEERING SERVICES SDN BHD Contact Person: Ling Kui Hung Address: Lot 7, Jalan Gudang 16/9, Seksyen 16, 40000 Shah Alam, Selangor Telephone Number: +603 5518 8118 (8 lines) FAX +603 5518 1180 Mobile Number: +6012 7007288 Website: www.turcomp.com Email: turcomp@turcomp.com Sponsor Type: Silver Sponsor Stand Number: C4

C:0 C : 87.89 : 98.44 WithM 76.56 Turcomp strives to be the major vendor and service provider in the Oil & Gas and EnergyMindustry. a :team Y : 100 Y :0 of professionals, engineers & technical staffs, Turcomp offers in-depth expertise in products and sourcing, engineering contracting and technical services for the Oil & Gas and Power Industry throughout Malaysia.

K :0 K :0

C:0 M: 0 Y :0 K : 100

TÜV SÜD Asia Pacific Pte Ltd Contact Person: Dr Antonio Feraco Address: 1 Science Park Drive, Singapore 118221 Mobile Number: +65 8833 3086 Website: www.tuv-sud.com Email: Antonio.feraco@tuv-sud.sg Sponsor Type: Exhibitor Stand Number: B13 TÜV SÜD Digital Service headquartered in Singapore is on the forefront of the 4th Industrial Revolution and helps companies to start, scale and sustain their Industry 4.0 transformation from the initiation, solutioning to implementation and operation. Our Industry 4.0 services comprise Consultancy, Maturity Assessments and Road mapping, Training, as well as Testing and Certification of safety, security, reliability and interoperability of connected industrial systems.

TÜV SÜD Digital Service is part of the TÜV SÜD group, an international service corporation and a world leader in consulting, testing, certification, and training. Headquartered in Munich, Germany, TÜV SÜD employs more than 24,000 professionals across 850 offices in more than 50 countries around the globe.

Automation

| December 2018

45

2nd ISA Malaysia Section Event 2018 Unicon System Co., Ltd. Contact Person: Chan Yew Ming Address: No. 47, Jalan Damai Niaga, Alam Damai, 56000 Kuala Lumpur, Malaysia.

Telephone Number: +603-9102 6440 Mobile Number: +6012-289 3290 Website: www.meerza.com.my / www.uniconvalve.com Email: chan@meerza.com.my Sponsor Type: Silver Sponsor Stand Number: A4 Unicon System Co., Ltd based in South Korea is establish in 2006. We specialize in the manufacturing of general to severe service control valves, desuperheater, steam conditioning valve, butterfly valve, ball valve and special design valve.

Unicon strength is being able to custom solution to suit end user requirement according to the applications.

Unicon is a company which is still growing. We have the resources and technology to meet demanding applications.

Vector Infotech Sdn Bhd Contact Person: William Chow Hoong Wei Address: No. 37, Jalan 4/93, Taman Miharja, Off Jalan Loke Yew, 55200 Kuala Lumpur Telephone Number: +603 – 9200 1396 Mobile Number: +6016 – 2277 611 Website: www.vectorinfotech.my Email: williamchow@vectorinfotech.com Sponsor Type: Exhibitor Stand Number: B7 Established in 1998, Vector Infotech Malaysia with its head-office based in Kuala Lumpur, specializes in the supply of reliable industrial products and solutions to local and multinational corporations from the Oil & Gas, Petrochemicals, Power, Utilities, Transportation & Chemicals, Semiconductor Plants, Building & Construction, Food, Pulp & Paper Industries and Commercial Sectors such as hotels, airport, shopping complex and enterprise companies.

Vector InfoTech Malaysia has grown in our respective business units into a single entity to become a complete Industrial Networks, Industrial IT and Industrial Telecommunications System solution provider. Our complete industrial system solutions include Industrial Communications and Networking Systems Hardware, Software and Engineering Services, extending to Total Turnkey Communication System Packages.

Our other complete system solutions include IT Network & Communication Systems such as LAN/Wireless, Card Access, CCTV, Hotel Smart TV, Vital Smart Lock & Electric Switch, E-Cqurity security system and Hotel Management System. This has been proven with records of supplying to commercial buildings from large organization to small scale enterprise such as hotels, and companies.

Our achievements in supplying reliable high performance products and complete solution systems has been proven with a consistent track record of cordial and strong working relationships with renowned local and global organizations hailing from diverse industries.

46 Automation

| December 2018

2nd ISA Malaysia Section Event 2018 VSI Controls Contact Person: Massimo Pianigiani Address: Via Locatelli, 5 20124 Milan, Italy Telephone Number: +39 335 1008464 Mobile Number: +39 335 1008464 Website: www.vsicontrols.com Email: info@vsicontrols.com Sponsor Type: Exhibitor Stand Number: B8 VSI Controls, a newly formed control valve company and wholly owned subsidiary of Petrolvalves, offers a complete range of rotary and reciprocating control valves for standard and severe service applications and provides a best-fit-solutions to our Customers of Oil & Gas, Petrochemical and Power Market.

Yokogawa Kontrol (M) Sdn Bhd Contact Person: Hamdan Bin Abdul Samad Address: No 9, Jln Industri PBP 3, Tmn Industri Pusat Bandar Puchong, 47100 Puchong, Selangor Telephone Number: +603-8064 9888 Mobile Number: +6012-217 3133 Website: http://www.yokogawa.com/my Email: Hamdan.Samad@my.yokogawa.com Sponsor Type: Gold Sponsor Stand Number: B4 Yokogawa Malaysia aims to be the largest and the most competent Integrated Automation Solution Provider in the Field of Measurement, Control and Information through Process Co-Innovation with our customers and society.

We strive to be dynamic and enterprising organization embracing Yokogawa Core Values as the driving force for business excellence and achieving competitive advantages and a brighter future through the Co-Creation of Values with our industries in Malaysia focusing on Co-Innovating a New Paradigm through Digitalization. Our Lifecyle Performance Care Services Sustainable Plan reinforces our deliverables to customers. Such plan provides optimal service solution to meet customer’s plant needs to achieve long-term, stable and secure operations throughout the system Lifecycle.

We have contributed our products, services and solutions in over 500 projects covering the Oil & Gas, Refining, Petrochemical, Oleo Chemical, Iron & Steel, Power Plant, Education, Paper & Pulp, Electrical & Electronics, Food & Beverages, Marine and others. Our proven track records achieved through localization speak premium of our deliverables.

With our leading-edge technologies, Yokogawa Malaysia will continue to play an indispensable role by providing performance value-added products, solutions and services that help Malaysian industries to grow and thrive in an ever fast changing business landscape.

Automation

| December 2018

47

Beckhoff Automation Sdn Bhd

B15

COMPRESSOR CONTROLS CORPORATION

A1

Control-Care

B6

Crealogy Sdn Bhd (1087081-D)

B12

2nd ISA Malaysia Section Event 2018

Emerson Automation Solutions Business Activity Locator

Advanced Process Control & Optimization

B3

Endress+Hauser (Tenaga) Sdn Bhd

C5

FOXBORO (MALAYSIA) SDN. BHD.

A6

ABB Malaysia Sdn. Bhd.

B2

HONEYWELL PROCESS SOLUTIONS

B9

Baker Hughes, a GE company

A3

IMI Precision Engineering

C2

Beckhoff Automation Sdn Bhd

B15

PAS Global LLC.

B10

COMPRESSOR CONTROLS CORPORATION

A1

REXA Inc.

A2

Control-Care

B6

Trisystems Engineering Sdn. Bhd.

A7

Crealogy Sdn Bhd (1087081-D)

B12

TURCOMP ENGINEERING SERVICES SDN BHD C4

Emerson Automation Solutions

B3

TÜV SÜD Asia Pacific Pte Ltd

B13

Endress+Hauser (Tenaga) Sdn Bhd

C5

VSI Controls

B8

FOXBORO (MALAYSIA) SDN. BHD.

A6

Yokogawa Kontrol (M) Sdn Bhd

B4

HONEYWELL PROCESS SOLUTIONS

B9

PAS Global LLC. ABB Malaysia Sdn. Bhd. REXA Inc. COMPRESSOR CONTROLS CORPORATION Trisystems Engineering Sdn. Bhd. Crealogy Sdn Bhd (1087081-D) TURCOMP ENGINEERING SERVICES SDN BHD Emerson Automation Solutions TÜV SÜD Asia Pacific Pte Ltd FOXBORO (MALAYSIA) SDN. BHD. VSI Controls HONEYWELL PROCESS SOLUTIONS Yokogawa Kontrol (M) Sdn Bhd Siemens Malaysia Sdn Bhd

B10 B2 A2 A1 A7 B12 C4 B3 B13 A6 B8 B9 B4 B1

ABB Malaysia Sdn. Bhd.

B2

Baker Hughes, a GE company

A3

Beckhoff Automation Sdn Bhd

B15

COMPRESSOR CONTROLS CORPORATION

A1

Control-Care

B6

Crealogy Sdn Bhd (1087081-D)

B12

Emerson Automation Solutions

B3

Endress+Hauser (Tenaga) Sdn Bhd

C5

Trisystems Engineering Sdn. Bhd.

A7

HONEYWELL PROCESS SOLUTIONS

B9

i.safe MOBILE GmbH

A5

Automation System Obsolescence and C2 IMI Precision Engineering Life Cycle Management

TURCOMP ENGINEERING SERVICES SDN BHD C4

Digitalization

TÜV SÜD Asia Pacific Pte Ltd

B13

PAS Global LLC.

B10

Yokogawa Kontrol (M) Sdn Bhd

B4

Siemens Malaysia Sdn Bhd

B1

Trisystems Engineering Sdn. Bhd.

A7

TURCOMP ENGINEERING SERVICES SDN BHD C4

48 Automation

| December 2018

TÜV SÜD Asia Pacific Pte Ltd

B13

Yokogawa Kontrol (M) Sdn Bhd

B4

B6

Control-Care

B12 Crealogy Sdn Bhd (1087081-D) 2nd ISA Malaysia Section Event 2018

Field Instruments

Emerson Automation Solutions

B3

Endress+Hauser (Tenaga) Sdn Bhd

C5

FOXBORO (MALAYSIA) SDN. BHD.

A6

ABB Malaysia Sdn. Bhd.

B2

HONEYWELL PROCESS SOLUTIONS

B9

Baker Hughes, a GE company

A3

IMI Precision Engineering

C2

BFI Automation Mindermann GmbH

B11

Inland Oil and Gas Instruments Sdn Bhd

C1

Brix Engineering Pte Ltd

B14

i.safe MOBILE GmbH

A5

COMPRESSOR CONTROLS CORPORATION

A1

Trisystems Engineering Sdn. Bhd.

A7

Control-Care

B6

Crealogy Sdn Bhd (1087081-D)

B12

Unicon System Co., Ltd. ABB Malaysia Sdn. Bhd.

A4 B2

Emerson Automation Solutions

B3

VSI Controls Baker Hughes, a GE company

B8 A3

Endress+Hauser (Tenaga) Sdn Bhd

C5

Process Safety

Yokogawa Kontrol (M) Sdn Bhd COMPRESSOR CONTROLS CORPORATION

B4 A1

FOXBORO (MALAYSIA) SDN. BHD.

A6

Crealogy Sdn Bhd (1087081-D)

B12

HONEYWELL PROCESS SOLUTIONS

B9

ABB Malaysia Sdn. Bhd. Emerson Automation Solutions

B2 B3

IMI Precision Engineering

C2

BFI Automation Mindermann GmbH Global Security Network

B11 C3

Inland Oil andSdn. Gas Bhd. Instruments Sdn Bhd ABB Malaysia

C1 B2

i.safe MOBILE Baker Hughes,GmbH a GE company

A5 A3

Trisystems Engineering Sdn. Bhd. COMPRESSOR CONTROLS CORPORATION

A7 A1

COMPRESSOR CONTROLS CORPORATION HONEYWELL PROCESS SOLUTIONS Control-Care PAS Global LLC. Crealogy Sdn Bhd (1087081-D) Siemens Malaysia Sdn Bhd Emerson Automation Solutions Trisystems Engineering Sdn. Bhd. Endress+Hauser (Tenaga) Sdn Bhd Yokogawa Kontrol (M) Sdn Bhd HIMA ASIA PACIFIC PTE LTD

A1 B9 B6 B10 B12 B1 B3 A7 C5 B4 B5

HONEYWELL PROCESS SOLUTIONS

B9

IMI Precision Engineering

C2

Industrial Control Systems Cybersecurity

TURCOMPSdn ENGINEERING SERVICES SDN BHD C4 B12 Crealogy Bhd (1087081-D)

Industrial Control Systems Cybersecurity

TURCOMP ENGINEERING SERVICES SDN BHD C4

Unicon System Co., Ltd. Emerson Automation Solutions

A4 B3

VSI Controls Global Security Network

B8 C3

Yokogawa Kontrol (M) Sdn Bhd HONEYWELL PROCESS SOLUTIONS

B4 B9

PAS Global LLC.

B10

ABB Malaysia Sdn. Bhd. Siemens Malaysia Sdn Bhd

B2 B1

Inland Oil and Gas Instruments Sdn Bhd

C1

BFI Automation Mindermann GmbH Trisystems Engineering Sdn. Bhd.

B11 A7

i.safe MOBILE GmbH

A5

COMPRESSOR CONTROLS CORPORATION Yokogawa Kontrol (M) Sdn Bhd

A1 B4

PAS Global LLC.

B10

Control-Care

B6

REXA Inc.

A2

Crealogy Sdn Bhd (1087081-D)

B12

Siemens Malaysia Sdn Bhd

B1

Emerson Automation Solutions

B3

Trisystems Engineering Sdn. Bhd.

A7

Endress+Hauser (Tenaga) Sdn Bhd

C5

TURCOMP ENGINEERING SERVICES SDN BHD C4

HIMA ASIA PACIFIC PTE LTD

B5

TÜV SÜD Asia Pacific Pte Ltd

B13

HONEYWELL PROCESS SOLUTIONS

B9

Vector Infotech Sdn Bhd

B7

IMI Precision Engineering

C2

Yokogawa Kontrol (M) Sdn Bhd

B4

Inland Oil and Gas Instruments Sdn Bhd

C1

Process Safety

Automation

| December 2018

49

Beckhoff Automation Sdn Bhd

2nd ISA Malaysia Section Event 2018 COMPRESSOR CONTROLS CORPORATION Turbomachinery Controls

B15 A1

Control-Care

B6

Crealogy Sdn Bhd (1087081-D)

B12

Emerson Automation Solutions

B3

Beckhoff Automation Sdn Bhd

B15

HONEYWELL PROCESS SOLUTIONS

B9

COMPRESSOR CONTROLS CORPORATION

A1

Trisystems Engineering Sdn. Bhd.

A7

Control-Care

B6

TURCOMP ENGINEERING SERVICES SDN BHD C4

Crealogy Sdn Bhd (1087081-D)

B12

TÜV SÜD Asia Pacific Pte Ltd

B13

Emerson Automation Solutions

B3

Yokogawa Kontrol (M) Sdn Bhd

B4

HONEYWELL PROCESS SOLUTIONS

B9

Trisystems Engineering Sdn. Bhd.

A7

TURCOMP ENGINEERING SERVICES SDN BHD C4 TÜV SÜD Asia Pacific Pte Ltd

B13

Yokogawa Kontrol (M) Sdn Bhd

B4

50 Automation

| December 2018

POST SHOW

REPORT 2018

1ST ISA THAILAND SECTION EVENT 2018

28th - 29th August 2018

Centara Grand Mirage Beach Resort Pattaya - Thailand

POST SHOW REPORT

1ST ISA THAILAND SECTION EVENT

The 1st ISA Thailand Section Event 2018 aimed to provide a large platform for the Automation Industry in Thailand and the region to connect, interact, and grow.

The two - day event took place on 28th and 29th of August 2018 at Centara Grand Mirage Beach Resort Pattaya - Thailand.

52 Automation

| December 2018

POST SHOW REPORT

KEYNOTE SPEECHES The Section event opened with the Keynote speeches by dignitaries.

S

“ o for a change instead of looking at this event as a case of promoting digital transformation. I want you to ask yourself a question. What is the cost of digital transformation? What is the price that we are having to pay for this disruptive change?”

Mohammed Loch President & CEO- DMS Global Director Industry Development ISA

T

“ he digital transformation into our business is to enhance our efficiency, reliability, and safety. I think that does what we can’t do.

Doing nothing is not an option for today.”

Bhawana Suphavilai President - PTT Energy Solutions President - ISA Thailand

N

“ ow we are coming to the 4th Industrial industry revolution, and we all and you are a part of this, to develop this, to create this, all as engine gears.”

Friedhelm Best Vice President - HIMA Asia Pacific

Automation

| December 2018 53

POST SHOW REPORT

THE EVENT IN NUMBERS ATTENDEES

SPONSORS

EXHIBITORS

SPEAKERS

2018

331

5

13

25

2019

400

7

20

30

(Expected Projections)

The participating companies represented were mainly End Users and EPC’s.

66% 29% 4%

219 EPC’S AND END USERS

54 Automation

| December 2018

331

Total Attendees

98 VENDORS

14 EDUCATIONAL INSTITUTE

POST SHOW REPORT

FLOOR PLAN

C1

C2

COFFEE BREAK

A4

A3

B3

B2

D4 ICS Cybersecurity. Safety. Compliance.

D3

A2

COFFEE BREAK

D2

B1

A1

D1

ENTRANCE

Automation

| December 2018 55

POST SHOW REPORT

AWARDS CEREMONY Following the Keynote speeches, the event sponsors and organizers were awarded.

Award given to : Diamond Sponsor

Friedhelm Best, Vice President Region Asia Pacific, HIMA ASIA PACIFIC PTE LTD

Award given to : Gold Sponsors

Surapong Chantrapuen, Country Manager, Thailand & Myanamar, COMPRESSOR CONTROLS CORPORATION

Sombat Tuntiwong, Managing Director, VEGA Instruments Co.,Ltd.

Award given to : Bronze Sponsors

Suman Bhaskar, Business Unit Manager, Thailand, ABB LIMITED

56 Automation

| December 2018

Gilles Loridon, CEO, Global Security Network

POST SHOW REPORT

END USER ATTENDEE PROFILE

Automation

| December 2018 57

POST SHOW REPORT

ATTENDEE PROFILE Managing Director Engineer, Instrument Section Senior Engineer, Refinery Information Technology Management Division Engineer, Instrument Section Engineer, Technical Service Division Instrument engineer Instrument and Control Engineer Control and Instrumentation Supervisor Maintenance Supervisor C&I Department Manager, Maintenance Division Operations Director Training Engineer Process Engineer Engineering Support Manager IT Analyst E&I Facilities Engineer C&I Engineer JT V.P. VP Engg Section Manager Senior Instrument Engineer TET Engineer Electric Maintenance Officer Section Head - Maintenance Senior Manager - Production Section Head - Instrumentation Maintenance Engineer VP-procurement System Analyst Plant IT Lead Innovation for Business Manager Technical specialist Manager Assistant Electrical Engineering Manager Section Head of Vacuum pan Sr Custodian / President- ISA Malaysia Analyst at Downstream Business Group Strategy & Planning Department Corporate affairs division manager Senior Reliability Engineer (Instrument), Engineering Unit Reliability Engineer (DCS), Engineering Unit Process Engineer Principal Consultant-Process Safety Principal Consultant - Knowledge Excellence Senior Consultant - Technical Training Academy Senior Consultant-Reliability & Asset Integrity Consultant - Process Performance Improvement Business Development Manager QA&KM Coordinator VP Business Development

58 Automation

| December 2018

Senior Specialist Instrumentation CPA/T: Senior Technical safety Engineer Instrument Engineer Control System Engineer Division Manager, Process Engineering Technology Engineer & instruments Division Manager Senior Process Engineer Sr.Process Control Engineer Specialist-RTO Process Control Engineer Vice President Division Manager Specialist-Instrument Project Coordination Engineer Acting Division Manager T/A Planner LLDPE operation support manager Senior Process Engineer Instrument Engineer Instrument Reliability Engineer Maintenance Engineering Plant Inspection Enterprise Information Plant Maintenance Solution Lead Senior Engineer, Electrical Analyst Organization & Employee Development Officer President / President- ISA Thailand VP Reliability & Asset Integrity Instrument Specialist Lead Engineer - Digital Manufacturing Technology Production Section Manager I & E Manager Project Engineer Instrument Project Engineer Technologist - Process Control/Project Technologist - Process Control APU-D/E Process Supervisory/System Analyst Technologist - Process Control APU-F System engineer DCS Engineer Manager IT Supervisor Teacher Head of Instrument and Mechatronic Department QMI Project Engineer System Project Engineer Instrument Maintenance Supervisor General Manager

POST SHOW REPORT

SECTION EVENT The Section event was inaugurated by Bhawana Suphavilai, President – PTT Energy Solutions, President – ISA Thailand.

13 regional and international companies exhibited at the event.

ICS Cybersecurity. Safety. Compliance.

Automation

| December 2018 59

POST SHOW REPORT

1st ISA Thailand Section EventAND 2018 SPEAKERS TECHNICAL PROGRAM www.isa-thailand.org

The 2-day Section event covered 28th – 29th August 2018 the following topics: Centara Grand Mirage Beach Resort

Advanced Process Pattaya -Control Thailand& Optimisation

Digitlization

Field Instruments

#ISAThailand EXPERIENCE THE FUTURE. Industrial Control Systems Cybersecurity Process Safety

Organised By:

www.isa-thailand.org

Day One: Tuesday 28th August 2018 7:15am – 8:15am Registration 8:15am – 8:40am Keynote Speeches

Mohammed Loch President & CEO - DMS Global Director Industry Development - ISA

Bhawana Suphavilai President - PTT Energy Solutions President - ISA Thailand

Friedhelm Best Vice President - HIMA Asia Pacific

8:40am – 10:20am Digitalization Speakers

Bob Gill General Manager, Southeast Asia ARC Advisory Group Presentation: IT/OT Organizational Design for Successful Digital Transformation

Ir. V.R.Harindran Sr Custodian I & C PETRONAS President- ISA Malaysia Presentation: Digital Challenges in Oil & Gas Industries

Taweelarp Pornkul VP Reliability & Asset Integrity PTT Energy Solutions Presentation: Driving Operational Excellence through Digitalization

Tutpol Ardsomang Reliability Engineering & Data Science Manager Rayong Engineering and Plant Service Co.,Ltd Presentation: Machine Learning for Online Error Detection of Ethylene Gas Chromatography

10:20am – 11:00am Ribbon Cutting & Exhibition Tour 11:00am – 12:45pm Digitalization Speakers

Dr. Anukoon Asawachatroj Chairman FieldComm Group Thai Association Presentation: Digitalization in Process Automation

Dirk Pretorius General Manager – Projects Automation, Asia Pacific HONEYWELL PROCESS SOLUTIONS Presentation: IIOT to Optimize Performance

Anand Makhija Technical Director PAS Global LLC Presentation: Better Knowledge of Safe Operating Limits to Improve Human Reliability

Oveldo Halim Jungestian Account Manager Rockwell Automation Presentation: Digital Transformation – The Connected Enterprise Journey

12:45pm – 2:00pm Lunch & Exhibition Networking

60 Automation

| December2:00pm 2018 – 4:00pm Advanced Process Control & Optimisation

11:30am – 1:00pm Advanced Process Control & Optimisation / Productivity Improvement

POST SHOW REPORT Dr. Anukoon Asawachatroj Chairman FieldComm Group Thai Association Presentation: Digitalization in Process Automation

Dirk Pretorius General Manager – Projects Automation, Asia Pacific HONEYWELL PROCESS SOLUTIONS Presentation: IIOT to Optimize Performance

Anand Makhija Technical Director PAS Global LLC Presentation: Better Knowledge of Safe Operating Limits to Improve Human Reliability

Oveldo Halim Jungestian Account Manager Rockwell Automation Presentation: Digital Transformation – The Connected Enterprise Journey

12:45pm – 2:00pm Lunch & Exhibition Networking 2:00pm – 4:00pm Advanced Process Control & Optimisation 11:30am – 1:00pm Advanced Process Control & Optimisation / Productivity Improvement Speakers

Bui Huu Thanh Alan Wong Supervisor Control and Instrumentation Technical Consulting Binh Son Refining Engineer and Compressor Joint Controls Corporation Petrochemical Stock Company Presentation: Presentation: Improving Productivity Whileto Impact of Lightening / Thunder Maintaining MachineryTurbomachinery Vibration SignalsSafety

Mohamed Abousalem Asia Pacific Commercial Leader Compressor Controls Corporation Presentation: Synergetic Optimization of Process and Turbomachinery Controls

Peter Sieber Vice President Region China Vice President Norms & Standards HIMA Germany Presentation: Turbomachinery Control: Integrating Safety and Control

Pavan Kulkarni Technical Consulting Engineering Compressor Controls Corporation Presentation: Only an Efficient Turbomachinery Can be Clean & Green

Fahad Al Kalbani Control & Automation Engineer Petroleum Development of Oman Presentation: Automated ESD Valve Timer

4:00pm – 5:30pm Coffee Break & Exhibition Networking

Day Two: Wednesday 29th August 2018 7:30am – 8:30am Registration 8:30am – 10:15am Industrial Control Systems Cybersecurity Speakers

Gilles Loridon CEO Global Security Network Presentation: Cases Studies: Implementing IEC 62443 Zones & Conduits in The Real World

Peter Sieber Vice President Region China Vice President Norms & Standards HIMA Germany Presentation: Safecurity: Functional Safety and Cybersecurity

Panida Dhetsupakarn Instrument Specialist PTT Global Chemical Presentation: GC Industrial Control System/ OT Cyber Security Project

Jonathan Tam Cyber Security Consultant, APAC Schneider Electric Systems Presentation: How do you Capitalize on Opportunities from the IIoT While Managing Cyber Risk?

10:15am – 11:00am Coffee Break & Exhibition Networking 11:00am - 12:45pm Field Instruments Speakers

Vinay Kariwala Technology Manager ABB Presentation: Digital Technologies for Reliable Operation and Maintenance of Measurement Devices

Huynh Anh Phuoc Maintenance Supervisor Binh Son Refining and Petrochemical Joint Stock Company Presentation: Suitable Flow Meter for Slurry Service

Corrie van Rensburg Modular Systems & FI Attach Sales Lead HONEYWELL PROCESS SOLUTIONS Presentation: Dealing with Saturated Steam: Achieve Accurate Guided Wave Radar Readings in Challenging Boiler Applications

Automation

Sombat Tuntiwong Managing Director VEGA Instruments Co.,Ltd. Presentation: The Future is Radar 80 GHz

| December 2018 61

Gilles Loridon CEO Global Security Network Presentation: Cases Studies: Implementing IEC 62443 Zones & Conduits in The Real World

Panida Dhetsupakarn Instrument Specialist PTT Global Chemical Presentation: GC Industrial Control System/ OT Cyber Security Project

Peter Sieber Vice President Region China Vice President Norms & Standards HIMA Germany Presentation: Safecurity: Functional Safety and Cybersecurity

Jonathan Tam Cyber Security Consultant, APAC Schneider Electric Systems Presentation: How do you Capitalize on Opportunities from the IIoT While Managing Cyber Risk?

POST SHOW REPORT

10:15am – 11:00am Coffee Break & Exhibition Networking 11:00am - 12:45pm Field Instruments Speakers

Vinay Kariwala Technology Manager ABB Presentation: Digital Technologies for Reliable Operation and Maintenance of Measurement Devices

Huynh Anh Phuoc Maintenance Supervisor Binh Son Refining and Petrochemical Joint Stock Company Presentation: Suitable Flow Meter for Slurry Service

Corrie van Rensburg Modular Systems & FI Attach Sales Lead HONEYWELL PROCESS SOLUTIONS Presentation: Dealing with Saturated Steam: Achieve Accurate Guided Wave Radar Readings in Challenging Boiler Applications

Sombat Tuntiwong Managing Director VEGA Instruments Co.,Ltd. Presentation: The Future is Radar 80 GHz

12:45pm – 2:00pm Lunch & Exhibition Networking 2:00pm – 4:00pm Process Safety Speakers

Tran Tan Chuc C&I Department Manager, Maintenance Division Binh Son Refining and Petrochemical Joint Stock Company Presentation: Apply Voting Protection Solution and SIL Verification to Improve Reliability and Safety of the Control Loops

Alan Wong Technical Consulting Engineer Compressor Controls Corporation Presentation: Improving Productivity While Maintaining Turbomachinery Safety

Sujith Panikkar Director Of Consulting HIMA Asia Pacific Pte Ltd Presentation: SIS Safety Lifecycle Management For Major Hazards Installations

Johan Sandberg Senior Business Development Manager Emerson Automation Solutions, Rosemount Tank Gauging Presentation: Prevent Floating Roof Disasters Using Modern Wireless Radar Monitoring

Dr. Issam Mukhtar Functional Safety Consultancy Schneider Electric Presentation: Optimisation of Safety Instrument System in Maintenance and Operation

4:00pm – 5:00pm Coffee Break & Exhibition Networking

www.isa-thailand.org Hosted By

Diamond Sponsor

Gold Sponsors

Bronze Sponsors

Supported By

Official Logistics Partner

62 Automation

| December 2018

POST SHOW REPORT

TESTIMONIALS AND FEEDBACK

100% of the participants said that the event was the same or better than others.

100% of the participants will recommend the event to their colleagues.

“I am very happy to attend the high valued ISA meeting for learning, sharing among End users, Experts, Manufacturers. We are looking forward to meeting you again in the next ISA meeting in Vietnam.”

Tran Tan Chuc, C&I Deparment Manager, Maintenance Division, Binh Son Refining & Petrochemical Joint Stock Company

“The ISA Thailand 2018 event was another well-organized conference consistent with the earlier ISA conferences in the region, in which I could see good participation from all industry stakeholders. The papers presented at the conference captured the current industry trends very well and most certainly this provided participants with great learning opportunities.

Well done and keep up the good work!”

Sujith Panikkar, Director Of Consulting, HIMA Asia Pacific Pte Ltd

“It was the first time I had attended an ISA event so it did surprise me a lot.

Everything was prepared perfectly and professionally by your team. I think we have obtained a lot of valuable information, updated new techniques, and also experienced wonderful moments during the event. It’s really a successful event for us.Thank you very much for the warm and friendly dinner. And thanks a lot for all kind support from your team during the event time.”

Bui Huu Thanh, Control and Instrumentation Supervisor, Binh Son Refining and Petrochemical Joint Stock Company

Automation

| December 2018 63

POST SHOW REPORT

“ISA is a key part of our core strategy for marketing CCC because it is the closest to our customers which is a key part of our messaging. These regional shows are perfect. They’re in beautiful locations. The attendance has been phenomenal.

The other amazing thing is to see the customers lined up in the middle of the aisle. It’s like a spillover which you don’t get to see that in a lot of shows.”

Richard Hall, VP Marketing and Product Management, Compressor Controls Corporation

“HIMA is present at ISA events because the ISA events organize a very effective platform for us to see our customers, to communicate with our customers, also get in touch with our customers and understand what are their needs and wishes.”

Peter Sieber, Vice President Region China, Vice President Norms & Standards, HIMA Germany

“The inaugural ISA Thailand event was a well-organized event that enabled me to network with the new automation professionals in Thailand and, at the same time, re-connect with global automation fraternity. I have gained good professional insights from the papers presented. The opportunity to present my paper enabled me to directly interact with participants, which further broadened my professional perspectives. I hope to see ISA events to be further expanded to shape the regional automation industries.”

Ir. V.R.Harindran, Sr Custodian, I & C PETRONAS, President- ISA Malaysia

“For a 1st the ISA Thailand Section Event 2018 was successful. Many End Users attended the event and for our field, ICS Cyber Security, we had good contacts with Decision Makers and Subject Matter Experts within the End Users. We were happy about the quality of the presentations dealing with Cyber Security and the conference room was full, which is great for Cyber Security. We had a great dialogue with the other Cyber Security Experts and the public had a lot of interesting questions. It’s clear that ICS Cyber Security is a top priority for the Thai big players and it would be interesting to have a forum dedicated to ICS Cyber Security in Thai Critical Infrastructures to be able to share best practices and lessons learn.”

Gilles Loridon, CEO, Global Security Network

64 Automation

| December 2018

POST SHOW REPORT

“The conference provided excellent opportunities for interactions with the customers. We look forward towards continued associated with ISA.” Vinay Kariwala, Technology Manager, ABB

“I really appreciate this well-organized seminar and look forward to participate in your future events. Convey my appreciation to Mohammed for his exceptional hospitality.”

Peeradech Suthangkornkul, Business Development Manager, Wood

“VEGA is a sponsor for ISA Thailand because we need to promote the new technology for the Radar Sensor. The customers can learn how it works and how it is benefited.”

Sombat Tuntiwong, Managing Director, VEGA Instruments Co.,Ltd.

Automation

| December 2018 65

POST SHOW REPORT

THANK YOU We would like to thank all our sponsors and partners for their support in making the 1st ISA Thailand Section Event a success.

Hosted By

Diamond Sponsor

Gold Sponsors

Bronze Sponsors

Supported By

66 Automation

| December 2018

Official Logistics Partner

POST SHOW

REPORT 2018

• sales@dmsglobal.net • www.dmsevents.net • +971 249 161 71 (UAE Office)

1ST ISA THAILAND SECTION EVENT 2018 www.isa-thailand.org 28th - 29th August 2018

Centara Grand Mirage Beach Reso Pattaya - Thailand DMS Events is a division o

Only the Safest Satisfies the Largest Protecting the World’s Largest Oil & Gas Companies From offshore rig to refinery and production platform to tanker, nine of the world’s ten largest oil and gas companies rely on HIMA for the seamless interaction of their safety solutions.

As the world’s leading specialist for safety-related automation solutions, HIMA safety solutions ensure uninterrupted, safer operations. HIMA has worked with leading companies throughout Asia Pacific, helping them to operate their plants safely and profitably. Together with our partner network in several Asia Pacific countries and local offices in 7 locations, we deliver the highest level of services – wherever your business or project is located.

Find out how HIMA can help you by contacting us at asia.pacific@hima.com or visit our website www.hima.com/en/asia-pacific for further information

POST SHOW

REPORT 2018

Analysis Division

27th September 2018

2ND ISA ANALYSIS DIVISION SINGAPORE SYMPOSIUM 2018

Sheraton Towers Singapore

POST SHOW REPORT

2nd ISA ANALYSIS DIVISION SINGAPORE SYMPOSIUM

Following the success of the 1st ISA Analysis Division Singapore Symposium event held in 2017, the increase in popularity led way to the 2nd ISA Analysis Division Singapore Symposium which was held on 27th September 2018 at Sheraton Towers Singapore.

70 Automation

| December 2018

POST SHOW REPORT

KEYNOTE SPEECHES The event opened with the Keynote speeches by dignitaries.

I

Benson Loh

“ SA- this is the platform to connect people and technologies. We are here because we are passionate and we are responsible to get a more true value of measurement, more reliable solutions for plant operation.

We do not accept the current technology as the best. We are always pursuing pioneering new technologies to help improve operations.”

Managing Director Practical Analyzer Solutions Pte Ltd

L

Mohammed Loch President & CEO- DMS Global Director Industry Development ISA

“ ast year we planted the seeds for the first symposium and as you saw from the video, it was a phenomenal success and we exceeded expectations. This year we have more delegates registered and you can see a bigger exhibition. Our committee is growing. What I love about today is the local content. There are so many Singaporean companies, Advanced CAE, ESPRO, Ronsor Engineering, Analytical Systems Engineering and would like to thank our Diamond sponsor, PAS for leading the way. This is a real global committee.”

Automation

| December 2018 71

POST SHOW REPORT

THE EVENT IN NUMBERS 2018

ATTENDEES

SPONSORS

EXHIBITORS

SPEAKERS

245

8

16

15

The participating companies represented were mainly Vendors.

165 V EN 80 E N

S R O D R S E S U D

67% 33%

72 Automation

| December 2018

245

Total Attendees

POST SHOW REPORT 2nd ISA Analysis Division Singapore Symposium 2018 Sheraton Tower Singapore

No of Booths - 16 8 - 6 sqm Booths - Total - 48 sqm 4 - 8 sqm Booths - Total - 32 sqm 2-14 sqm Booths - Total - 28 sqm 1 -16 sqm Booth - Total - 16 sqm 1 -24 sqm Booth - Total - 24 sqm

Ballroom 1 & Ballroom 2 Level 2

FLOOR PLAN

Total booth size - 148

B6

B7

B8

A4

B9

A5 B10

A3

B11

Entrances

B5

B4

A2 A1

B3 B2

B1

Automation

| December 2018 73

POST SHOW REPORT

AWARDS CEREMONY Following the Keynote speeches, the event sponsors and organizers were awarded.

Award given to : Diamond Sponsor

Caelynn Lee, Sales Engineer, Practical Analyzer Solutions Pte Ltd

Award given to : Gold Sponsors

Soon Teong Yeoh, Local Business Unit Manager, ABB Pte. Ltd

Stefanie Koch, Senior Product Manager Analyzers, Bartec Benke GmbH

74 Automation

| December 2018

POST SHOW REPORT

Peng Wei Song, GM, SIEMENS PTE. LTD.

Award given to : Bronze Sponsors

Jet Tan, General Manager, Advanced Holdings Ltd

ADAMI, JEAN-NICOLAS, Head of Strategic Product Group – Gas Analytics, Mettler-Toledo (S-) Pte Ltd

Steve Yap, Engineering Director, ESPRO MEASUREMENTS PTE LTD

Daniel Merriman,Product Manager - Process Analysers Environmental and Process Monitoring, Thermo Fisher Scientific

Automation

| December 2018 75

POST SHOW REPORT

END USER ATTENDEE PROFILE

76 Automation

| December 2018

POST SHOW REPORT

ATTENDEE PROFILE Assistant HeadChemical, Materials & Energy Cluster Science & Engineering Research Council (SERC) E & I Specialist Maintenance Engineer, Electrical & Instrumentation PAT Engineer Business Development Manager Process Control Engineer IE Supervisor Principal Technical Officer Principal Engineer Maintenance Engineer Engineer- Gas Operations Business Development Manager Analyzer Engineer Engineer Lead Analyzer Engineer Research Scientist Scientist II Senior Scientist I Student Scientist III Lead Instrument Engineer Senior Research Fellow Instrument Engineer Principal Instrument Engineer E&I Engineer Senior Analyzer Technician Lead Instrumentation Engineer Engineer - Instrumentation & Control Sr. Engineer Instrumentation

Chief Specialist Sr. Engineer Chief Engineer (Inspectorate) Engineer Principal Instrument Engineer Deputy Director (Systems & Comms) Technical Supervisor Engineer, Instrument & System Maintenance Senior Engineer (ICA) Shell Eastern Petroleum Pte Ltd Analyzer Engineer QMI Plant Maintenance Engineer Analyzer Engineer Laboratory Technologist Team leader Analyzer Maintenance Analyzer team Lead Senior Instrument Engineer Instrument Engineer PQ Assurance and Lab Manager Lead Engineer Principal Control Engineer Control Systems Section Manager Senior superintend Technical Officer Asst. Engineer Engineer Managing Director Project Manager

Automation

| December 2018 77

POST SHOW REPORT

SYMPOSIUM The Symposium was inaugurated by Benson Loh, Managing Director, Practical Analyzer Solutions Pte Ltd.

16 regional and international companies exhibited at the event.

78 Automation

| December 2018

POST SHOW REPORT

SPEAKERS AND TECHNICAL PROGRAM 2nd Analysis Division TheISA 1-day event covered the following topics: Singapore Symposium 2018 Best Practices for Analytical Systems Environment Management & Control2018 www.isa-ad-singapore.org 27th September Innovation Techniques #ISASingaporein Analytical Sheraton Towers Singapore Maintenance Challenges for Analytical Equipment

EXPERIENCE THE FUTURE.

Organised By:

Thursday 27th September 2018 7:15 am – 8:15 am Registration 8:15 am – 9:00 am Keynote Speeches

Mohammed Loch President & CEO DMS Global Director Industry Development ISA

Benson Loh Managing Director Practical Analyzer Solutions Pte Ltd

9:00 am – 9:30 am Exhibition Ribbon Cutting & Tour 9:30 am – 11:00 am Innovation in Analytical Techniques Speakers

Thorsten Koch Product Manager DURAG Group

Tony Tang Engineering Manager EQUILIBAR, LLC

Peng Wei Song General Manager Siemens PTE Ltd

Dr. Sohrab Zarrabian CEO ZEGAZ INSTRUMENTS, INC.

Presentation: Combination of OFCEAS Spectroscopy and Low Pressure Sampling, The Future of Emission Monitoring

Presentation: Innovative Control Valve for Continuous Analysis and Flow Chemistry Systems

Presentation: Module-based Process Analyzer Systems: Industry 4.0 Impact On Process Automation

Presentation: Accurate Measurement of Hydrocarbon and Water Dewpoints Using Infra-Red Chilled-mirror Spectroscopy

11:00 am – 11:30 am Coffee Break & Exhibition Networking 11:30 am – 1:00 pm Innovation in Analytical Techniques Speakers

Henry Montoya

Gary Englehart

Dr. Sherry Liu

Automation

| December 2018 79

Daniel Merriman

Presentation: Combination of OFCEAS Spectroscopy and Low Pressure Sampling, The Future of Emission Monitoring

Presentation: Innovative Control Valve for Continuous Analysis and Flow Chemistry Systems

Presentation: Module-based Process Analyzer Systems: Industry 4.0 Impact On Process Automation

Presentation:

Accurate Measurement of Hydrocarbon POST SHOW REPORT and Water Dewpoints Using Infra-Red Chilled-mirror Spectroscopy

11:00 am – 11:30 am Coffee Break & Exhibition Networking 11:30 am – 1:00 pm Innovation in Analytical Techniques Speakers

Henry Montoya Sales & Business Development Manager ESPRO

Gary Englehart Product Line Marketing Manager SpectraSensors Presentation: On-line Monitoring of Ethylene Purity Using TDLAS Analyzers for Sub-ppm Level Measurement of Ammonia and Water

Presentation: Tight Viscosity Measurement Helps Refineries Become More Efficient and Hit Target Specifications

Dr. Sherry Liu Director of R&D, Senior Principal Scientist SpectraSensors Inc., An Endress+Hauser Company Presentation: Reliable Sub-ppm Measurement of Trace Gas Species in Ethylene with On-line LAS Analyzers: TDL Success vs. QCL Reality

Daniel Merriman Product Manager Thermo Fisher Scientific Presentation: VOC and LEL Monitoring, a Novel Approach to Multi-Point Monitoring of Very Different Parameters with a Combined Analytical System

1:00 pm – 2:00 pm Lunch Break & Exhibition Networking 2:00 pm – 3:15 pm Best Practices for Analytical Systems Speakers

Shawn Ho Technical Sales Specialist, Product Manufacturing Unit, Lewisburg ABB Pte Ltd

Stefanie Koch Senior Product Manager Analyzers BARTEC BENKE

Presentation: Integration of a Process Gas Chromatograph Controller with the Analytical Oven

Presentation: On – Line Measurement Of Vapour Pressure In Hydrocarbon Liquids With The Rvp-4 Suitable For a Wide Range Of Samples From Crude to LPG

Yao Wang Representative China NEO Monitors AS

Joseph Fillion Global Director Analytical Systems Schneider Electric

Presentation: Challenging Applications Solved by in-situ TDLAS

Presentation: Best Practices in Motor Gasoline Blending

3:15 pm – 3:45 pm Coffee Break & Exhibition Networking 3:45 pm – 5:00 pm Environment Management & Control / Maintenance Challenges for Analytical Equipment Speakers

Günter Haberzettl Product and Industry Manager ABB Automation GmbH

Owen Webb Managing Director DURAG SEA PTE LTD

Presentation: First in Class Hot-Wet FTIR based Emission Monitoring System – Setting Standards for Multi-Components Gas Analysis

Presentation: Modern Modular Designed Environmental and Process Data Management Systems

Jean-Nicolas Adami Head of Strategic Product Group – Gas Analytics METTLER TOLEDO GMBH Presentation: New Advances in Folded Pathlength Technology for Process Tunable Diode Laser Absorption Spectrometers (TDLAS)

5:00pm – 5:30pm Coffee Break & Exhibition Networking

80 Automation

| December 2018

www.isa-ad-singapore.org

POST SHOW REPORT

TESTIMONIALS AND FEEDBACK

100% of the participants said that the event was the same or better than others.

100% of the participants will recommend the event to their colleagues.

“We found the ISA Singapore Symposium 2018 very well organized. The venue was well chosen for the event. The staff was very helpful with last minute adjustments and request. The exhibition was well attended by decision makers within the industry. The talks were relevant to our industry. We are planning to attend this event again. Overall, we recommend attending and exhibiting at this event to others who are involved in natural gas analytics.”

Dr. Sohrab Zarrabian, CEO, ZEGAZ INSTRUMENTS, INC.

” We participated in the first ISA last year and we figured that there is a lot of interests especially from end users. Because of that, this year we want to promote this better by increasing participation by using regulators as well. Great expectation came out from the presentations and the papers that were delivered.

We noticed a lot of new technologies, new ways of doing things especially digitalization, moving towards the connected world. That is where we want to promote and the future of our analytics business.”

Soon Teong Yeoh, Local Business Unit Manager, ABB Pte. Ltd

Automation

| December 2018 81

POST SHOW REPORT

“Being a leading global provider of laser-based on-line field analytical instrumentation, it is a great platform for us to showcase our technical expertise, exchange ideas and interact with people within our analytical industry. We will definitely participate in next year’s symposium” Sherman TNG, Sales Manager, SpectraSensors

“I plan my trips around ISA because I can come in a few days earlier. I know the customers will be in town and because they also plan to go to ISA. We can talk about on- coming projects.”

Stefanie Koch, Senior Product Manager Analyzers, Bartec Benke GmbH

“Main reason for Siemens to take part in the ISA event is to promote our Modular oven’s gas chromatograph. This product will help to reduce a lot of your downtime from 1 -2 days to 1-2 hours. This will improve the operations liability and this will help you to reduce a lot of costs and unexpected failure.”

Peng Wei Song, GM, SIEMENS PTE. LTD.

82 Automation

| December 2018

POST SHOW REPORT

THANK YOU We would like to thank all our sponsors and partners for their support in making the 2nd ISA Analysis Division Singapore Symposium event a success.

Diamond Sponsor

Gold Sponsors

Bronze Sponsors

Supported By

Official Logistics Partner

Automation

| December 2018 83

POST SHOW

REPORT 2018

sales@dmsglobal.net www.dmsevents.net +971 249 161 71 (UAE Office)

Analysis Division

2ND ISA ANALYSIS DIVISION SINGAPORE SYMPOSIUM 2018

www.isa-ad-singapore.org 27th September 2018

Sheraton Towers Singapore DMS Events is a division of

W

8

DMS PROMOSTATION STAND Basic Shell Scheme

Upgraded Shell Scheme

Option One

Option Two

Basic Shell Scheme included in Exhibition Stand Booking Included in Exhibitor’s Cost Fascia Name 2 Chairs 1 Reception Counter Track Lights Carpet Power Socket

6 sqm stand 8 sqm stand 10 sqm stand Walls and Reception Counter Branding printed on forex board Fascia Name 1 Reception Counter 1 Table 2 Chairs Track Lights Carpet Power Socket

Automation

| December 2018

85

DIGITALIZATION

Key Digital Transformation IT Concepts for Operations

By Eric C. Cosman, ARC Advisory Group

Overview Many industrial companies have shifted from exploring the benefits of digital transformation to determining how to execute on its promise. For operations personnel, this means implementing things like remote monitoring, connected and optimized plants, digital procedures, predictive asset failure detection, or outcome-based services, as examples.

Doing so requires converging modern information technology (IT) concepts and software with operational technology (OT) and processes. For operations, successful convergence first begins with understanding key digital transformation IT concepts and how they will impact operations. Rather than focus on the digital transformation IT concepts through a technical lens, let’s look at them in terms of their implication on industrial operations.

This IT/OT convergence means more operations and line of businesses (LOBs) are being asked to process ideas and make decisions outside their normal areas of expertise. In one example, it might be asking them to understand and implement complex solutions using analytics and machine learning, including very advanced math concepts. Or, it could mean pushing them to rely on microservice software architecture to create, deploy, and scale applications to solve operational challenges and foresee the impact these technologies will have on operations.

Key Digital Transformation IT Concepts As IT/OT convergence has rapidly escalated, particularly via a growing number of pilot projects over the last eighteen months, a few digital transformation-related IT terms consistently pop up in conversations about operational optimization of processes and assets. It would be helpful for operations people to be aware of and understand these terms.

Rather than focus on the digital transformation IT concepts through a technical lens, this ARC report will define them in terms of their implication on industrial operations and business outcomes.

ways to create, consume, and support software. It is critical for supporting some of the benefits of modern software, such as rapid scalability and ubiquitous mobility. Additionally, cloud pricing models can shift costs from capital to operating budgets.

Some deployment nuances within the cloud that are worth knowing. These include: • Public Cloud: computing services offered by thirdparty providers over the public Internet, making them available to anyone who wants to use or purchase them.

• Private Cloud: computing services offered either over the Internet or a private internal network and only to select users, instead of the general public.

• Hybrid Cloud: A computing environment that combines a public cloud and an on-premise, private cloud by allowing data and applications to be shared between them, managed by a set of common tools.

• Hosted (or Virtual) Private Cloud: A computing environment dedicated to a user’s account. It is logically isolated from other virtual networks in the cloud.

• Serverless Computing: A cloud workload model that eliminates the need to manage server hardware and software. Users are charged only for the resources used, rather than for infrastructure (servers) or platform access (subscription).

Microservices Microservices-based software is a core concept of modern cloud application platforms. For these platforms, hardware and software are provided as a menu of smaller (micro) services rather than a large application or system. The services can operate in standalone fashion where needed or combined logically using programming.

Cloud Deployment Vendors are moving aggressively to develop new solutions or retrofit existing solutions in the cloud. For operations, the cloud provides much more flexible

86 Automation

| December 2018

Platform and Microservices Model

DIGITALIZATION Examples of typical microservices include various analytics and machine learning, data services, security, mobility, IoT/edge services, etc. Addi-tionally, a provider may bundle microservices into packaged applications of varying “size” that often have specific vertical use, such as asset per-formance management, shop-floor maintenance, logistics management, etc.

to deploy operational applications. In some instances, operations might need to develop and maintain ALM skill and support. Or, they can opt to leverage existing IT-department skills. Either way, the ability to use ALM tools will become mandatory for effective use of PaaS.

Platform

DevOps unifies software development and operations processes, which is key to agile software development.

It injects speed and scale into software development by reducing development cycles and making software releases more dependable while ensuring applications align with business objectives. It drives the design of microservices, collaboration tools, monitoring, etc.

It’s important as an underlying philosophy of digital transformation, one that operations will be required to embrace and support to effectively use platforms.

Operations personnel, particularly those managing automation, will be required to align their processes and skills to support a DevOps approach—likely managed

by IT—for creating, testing, deploying, and managing operational applications.

A modern Platform-as-a-Service (PaaS) is the “store” you visit when you want to purchase or lease various microservices, often called “tools.” Many times, providers position themselves as platforms when the model is a Software-as-a-Service (SaaS). It’s a key distinction in terms of whether they expose solution microservices (code) and data for you to build upon.

DevOps

Development Environment (Cockpit, Sandbox)

From an operations perspective, it’s important to think about platforms in terms of how you want to leverage a platform. It comes down to resources. Do you expect to build apps yourself? Is it important to have an app marketplace where an ecosystem of providers is constantly creating and offering third-party apps and microservices that you can use off-the-shelf? Do you prefer having a single supplier provide most of the needed functionality?

With platform-based services, users can choose and deploy solutions with much more freedom around length of use and depth of services. This is fundamentally different than the traditional “all-in” purchasing of larger software. Here is a link to an ARC market study on cloud application platforms with IoT.

Application Lifecycle Management This concept relates to software development in PaaS solutions. It covers a range of typical IT functions such as code governance, process flows, production, testing, etc.

While IT-centric, application lifecycle management is a critical skill for organizations that want to use PaaS

The working environment in a platform, often designated a “cockpit” or “sandbox,” is where data is managed and applications are built, deployed, and administered. This is also where security and user access are also usually overseen. The “dev environment” is primarily for use by IT-side developers.

As solution providers continue to refine their offerings, the dev environment will become more important to operations. Low-code application development tools are making it increasingly suitable for some non-developer use. In the market, this is being done by solution providers that increasingly offer tools for “non-data scientists” (e.g., engineers).

As operations integrate more of these engineers and subject matter experts (SMEs) into analytics and application deployment, an operational user experience is increasingly key to platform adoption and use. Currently, many platform user interfaces (UIs) are intended for use at the IT and enterprise levels. Redesign might be needed to get the UIs to conform better to typical operational human-machine interfaces (HMIs) standards.

Artificial Intelligence Technically speaking, the possibilities of AI fall into two camps: broad and narrow. Broad systems are capable

Automation

| December 2018

87

DIGITALIZATION of human behavior (think Terminator or HAL 9000).

Broad AI doesn’t exist yet, though we are moving toward aspects of it via things like autonomous vehicles.

Narrow AI is important, as it replicates human capability, not behavior. In operations, AI has quickly become marketing speak for things like machine learning, natural language processing, and chatbots, all examples of narrow AI.

Containers (e.g., Docker and Kubernetes) This term came on the heels of cloud and platforms.

It is a way to develop and use applications basically anywhere on physical or virtual hardware, without the need for deep expertise. Kubernetes and Dockers are platforms for doing so. ARC analyst, Harry Forbes, continues to track container advancements.

Containers aren’t new technology, but they have powerful potential when it comes to industrial operations.

Containers make it very easy to develop, deliver, and manage applications. For operations, this potentially removes the need to rely on proprietary runtime environments for distributed control and automation.

Industrial Network Edge Like its operational industrial edge counterpart, the network industrial edge occurs at the logical extremes of an information technology network. It consists of the equipment and devices capable of data communication, management (e.g. security, visualization, preparation, storage), and/or computing. The cloud became the “centralized” environment from which the “edge” could then be identified and defined. The network edge was previously viewed as the equipment and systems that fed data to it. However, that definition is too simplistic for today’s industrial purposes.

The network infrastructure edge can include a range of technologies, and this ecosystem diversity is often an additional point of confusion. It is often a mix of traditional IT equipment and devices as well as purpose-built industrial systems and technology. These many technologies can be introduced into an industrial

88 Automation

| December 2018

environment as individual components or within a network. Their functionality can also be embedded within operational infrastructure, such as turbines, vehicles, robots, etc.

Don’t Get Lost in the Technical Detail While not meant to be a comprehensive list, these terms are likely to be the ones operations personnel will encounter most frequently. Without an understanding of IT concepts, processes, and architectures, it is easy to get lost in the technical detail of IT/OT convergence, much of which can end up being irrelevant to operations. It’s important to concentrate on understanding the operational impact of technology versus breaking it down functionally. If you do need to dig into the functionality, focus on the “why” instead of the “what.”

ARC PROVIDES ACTIONABLE ANSWERS FOR YOUR STRATEGIC QUESTIONS

FEATURED PROJECT

PROJECT NAME: PCSB - Kumang Cluster Development Name of Client

PETRONAS PCSB - Petronas Carigali

Budget ($ US)

3,600,000,000

Contract Value ($ US)

1,700,000,000

Award Date

Q4-2008

Main Contractor

Facility Type

Ramunia Fabricators Sime Darby Engineering Oilfab Sdn. Bhd Aker Solutions Subsea 7 Brooke Dockyard & Engineering Works Corporation Gas Field Development

Status

Construction

Start Date

Q4-2005

End Date

Q1-2020

PMC

PCSB - Petronas Carigali

FEED

Ranhill, WorleyParsons, Intecsea

Greenfield/ Brownfield Upstream/ Downstream Location

Brownfield Upstream Off Sarawak, Malaysia

Project Background Petronas has made a new gas discovery through its Kanowit-1 exploration well in Block SK306 offshore Bintulu in Sarawak, Malaysia. Kumang Cluster is located s located 200km offshore Bintulu, Sarawak in water depths of 59-102m and consists of 10 fields, including Kanowit gas field. The Kumang Cluster Development is used as a training project by Petronas Carigali for future diverless deepwater development projects in Malaysia.

Related Projects Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 (Overview) Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 - Common Facilities (UO2) & Tank Farm Package (UO3) Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 - MTBE Plant Petro Rabigh Refinery & Petrochemical Complex Expansion - Phase 2 - Utilities and Offsites (UO1)

Project Status Nov 2018

Brooke Dockyard today achieved another milestone with the delivery of a platform and jacket for Petronas Anjung Development project.

Oct 2018

The EPCC Anjung contract (part of Kumang Cluster PSC) was awarded to Brooke Dockyard and Engineering Works Corporation by Petronas.

90 Automation

| December 2018

FEATURED PROJECT

Mar 2018

The completion of drilling operation at F12JT-A platform is set for April 2018.

May 2017

The drilling works at F12JT-A gas platform of Kumang cluster is scheduled to begin in Q3 2017.

Apr 2017

The EPCC Anjung contract (part of Kumang Cluster PSC) was awarded to Brooke Dockyard and Engineering Works Corporation by Petronas.

Mar 2017

The project is expected to reach its peak by 2020 with the production of 4 billion cubic meters of gas.

Dec 2015

The client awards a contract to Malaysia Marine and Heavy Engineering Holdings Bhd (MHB) for offshore structure fabrication works.

Nov 2015

The PFLNG 1 is commissioned at the Kanowit field.

Aug 2014

Kumang cluster development in Block SK306 is currently under

Jun 2013

The construction of the floating liquefied natural gas facility (PFLNG 1) begins at Kanowit gas field.

Jan 2013

Subsea 7 completes offshore operations at the field.

Jul 2012

Production facilities for Kumang cluster will be built

Sep 2011

The client awards FEED contract to WorleyParsons.

Jun 2011

Subsea 7 announces the award of the Kumang Cluster Project by Petronas Carigali to Subsea 7 Malaysia.

Jul 2009

The construction of phase 1 is on track to produce its first gas by Q2 2010.

Oct 2008

Sime Darby Engineering is awarded for procurement and construction (P&C) for the topsides of two drilling platforms. Ramunia Fabricators for P&C of a drilling platform jacket. Oilfab for P&C of a drilling platform jacket, flare module, bridge and tripod.

Aug 2008

The client awards Tanjung Offshore provide a topsides package for the project.

Oct 2007

WorleyParsons completes FEED works

Oct 2006

MMCOG completes the work for Phase 1

Jul 2006

Petronas Carigali (PCSB) awards the contract for conceptual design and engineering services for Phase 1 to MMC Oil & Gas Engineering (MMCOG).

Project Scope The project scope includes phase development: Phase 1 Development of F9, Kumang and Kanowit fields Construction of one central processing platform (CPP) Construction of two satellite drilling platforms Drilling of 23 development wells Phase 2 Development of the remaining fields in the cluster (A3, F11, F22, F27, F12, Selar Marine, Bunga Pelaga, Anjung) Gas produced from the project will be transported to the Petronas LNG Complex in Bintulu via a new pipeline to be installed by 2010

Automation

| December 2018

91

FEATURED PROJECT

Project Finance Petronas funds the Kumang Cluster Development.

Project Contractors PMC PQ

Bidders

Awarded

-

-

- PCSB - Petronas Carigali

PQ

Bidders

Awarded

-

-

- Ramunia Fabricators - Sime Darby Engineering - Oilfab Sdn. Bhd - Aker Solutions - Subsea 7 - Brooke Dockyard & Engineering Works Corporation

PQ

Bidders

Awarded

-

-

EPC

FEED

FEED PQ

Bidders

-

-

- Ranhill - WorleyParsons - Intecsea Awarded - MMHE-Malaysia Marine Heavy Engineering - Jurunature Sdn. Bhd.

Project Schedules 4Q-2005

Project Announced

4Q-2005

Feasibility Study

1Q-2007

FEED

4Q-2008

Engineering & Procurement

1Q-2009

Construction

1Q-2020

Completed

Project Personnel Philip Ng - Manager - Aker Solutions Malaysia

Available only for DMS Members

Abdul Jamal Talib - Managing Director Communications & Business Development

Available only for DMS Members

Mokhzani Mahathir - Director - Kencana HL Sdn. Bhd.

Available only for DMS Members

Mohd Idros Hanafiah - Business Manager - OilFab Sdn Bhd

Available only for DMS Members

92 Automation

| December 2018

FEATURED PROJECT

Malaysia Project Listing PROJECT

FACILITY

BUDGET ($US)

STATUS

Dialog D&P - Offshore Bayan Oil Field Redevelopment Hibiscus - St Joseph Field Redevelopment IPC - Offshore Sabah Block SB303 JX Nippon - Offshore Sabah Block R JX Nippon Malaysia - Offshore Layang Gas Field FPSO Kuantan Port Consortium-NewOcean Energy - Oil Refinery Complex MTJA - Malaysia-Thailand Joint Development Area Mubadala Petroleum - Offshore Sarawak Block SK320 Murphy-PETRONAS - PFLNG 2 Block H Ophir Energy - Block PM322 PCG - Johor Refinery and Petrochemical Integrated Development (RAPID) - Package 11 PCG - Johor Refinery and Petrochemical Integrated Development (RAPID) - Package 6A PCSB - Bokor Redevelopment EOR Phase 3 PCSB - Kasawari Phase-2 PCSB - Kumang Cluster Development PCSB - Sabah Block 2G-2J Pengerang Gas Solution - Industrial Air Gas Facility PETRONAS - D18 Field Enhanced Oil Recovery (EOR) PETRONAS - Johor Refinery and Petrochemical Integrated Development (RAPID) - Overview PETRONAS - Johor Refinery and Petrochemical Integrated Development (RAPID) - Package 22 PETRONAS - Offshore Sarawak Block SK316 PETRONAS - Sepat Oil & Gas Field PETRONAS - Tukau Timur Gas Field PETRONAS-Shell - Sabah & Sarawak Offshore Oil Development PETRONAS-Total - K5 Sour Gas Field PPMSB - Melaka Refinery Diesel Euro 5 Upgrade Repsol - Offshore Sabah Block SB309 RHP - PETRONAS - SK331 Block Sapura Energy - Offshore Sarawak Block SK408 Sapura Energy - Onshore Sabah Block SB331 Sapura Energy - Onshore Sabah Block SB332 Sarawak Shell - Offshore Sarawak Block SK318 Shell-PCSB - E6 Field Development SSP - Ethylene-Polymer Plant

Oil Field Oil Field Development Exploration Oil & Gas Field Gas Field Refinery Gas Field Oil & Gas Field Gas Exploration Exploration Ethylene Linear Low Density Polyethylene (LLDPE) Oil Field Gas Field Development Gas Field Development Exploration Air Separation Enhanced Oil Recovery (EOR)

1,400,000,000 560,000,000 1,000,000,000 800,000,000 2,000,000,000 1,300,000,000 3,500,000,000 1,000,000,000 1,200,000,000 3,000,000,000 650,000,000 600,000,000 1,300,000,000 1,100,000,000 3,600,000,000 900,000,000 168,000,000 500,000,000

Construction Construction Construction Construction Construction Feasibility Study Construction Construction Construction Construction Construction Construction Construction EPC ITB Construction Construction Construction Construction

Petrochemical Plant

14,700,000,000

Construction

Oil Storage Tanks Gas Exploration Oil & Gas Field Gas Field Development Oil Field Gas Field Refinery Oil & Gas Field Exploration Gas Exploration Exploration Exploration Gas Exploration Oil & Gas Field Polymers

1,200,000,000 3,000,000,000 1,500,000,000 2,800,000,000 12,000,000,000 2,000,000,000 1,000,000,000 75,000,000 2,100,000,000 400,000,000 1,500,000,000 2,000,000,000 1,200,000,000 500,000,000 3,100,000,000

Construction Construction Construction Commissioning Construction EPC ITB Engineering & Procurement Construction Engineering & Procurement Construction Engineering & Procurement Engineering & Procurement Construction Construction Feasibility Study

Automation

| December 2018

93

REGIONS COVERED • Asia Pacific • Middle East • Latin America

• North America • Central America • Russia & CIS

• East Africa • North Africa • West Africa

• India • China • Europe

SECTORS COVERED

Oil

Gas

Petrochemicals

Water

Power

Infrastructure

Industrial

Refining

Construction

Pipeline

Offshore

Renewables

Mining

Fertilizer

A Division of

SUBSCRIBE TODAY or contact us for further information

• www.dmsprojects.net • info@dmsglobal.net • Tel: +973 1740 5590

DMS CSR

THE WATER PROMISE – DMS Global joins hands with WATER RELIEF.ORG Clean water has become one of our most precious resources in the 21st century, in fact, one in nine people live without access to clean and drinkable water.

The water crisis is real. It’s affecting men, women, children, families, and farmers. Women and children are spending hours a day fetching dirty water which leads to illness and disease, robbing entire communities of their futures.

Lack of access to safe water and proper sanitation harms health.

When health is affected, it limits education, leading to a cycle of poverty.

A bold commitment should be made to make sure everyone gets a chance to drink water from a reliable source.

DMS Global has joined hands with WATERRELIEF.ORG, a nonprofit charitable organization in helping to plant more fresh water wells and pumps throughout Africa and Asia.

Recently, DMS Global has taken an initiative to providing funds to dig a well in Ukhiya Village, Cox Bazar District, Chittagong division in Bangladesh.

This is to help the refugees from Myanmar who are currently residing in Bangladesh.

Every gift has an impact. Let’s share this gift of water with everyone.

Control Valves Product

UNICON SYSTEM Co.,Ltd. www.uniconvalve.com

Automation

| December 2018

95