OVERFLOW
The Inhabitation of Debate
Level 2 is a space intended to for lively interactions, debating with the space and each other in an effort to continue the environment of knowledge sharing and learning brought on by the impacts of COVID. It consists of bespoke elements supported by loose furniture that allows the space to adapt and move with those inhabiting it, to support learning and debate in a way that makes sense and is comfortable for them. Allowing people to adjust to this new public space for learning and begin to consider what interiors that host informal education can look and feel like.
How a Space can Debate with you
The detailing acts to better articulate the use, through communicating the audience’s ability to play with the space. It makes clear the separation of these spaces for debate from the existing floors and space of the Boiler House. This floor is not alive without people, they add the warmth, movement and function to the space through their inhabitation and engagement with it. Detailing of the internal mechanisms of the poles required layering various elements to ensure that the pole would remain as stable as possible while still functioning as an autonomous element within the floor.
Ai Id Xd Dn R Revi Ps A 02 31 METAL WIRE, RUNNING THROUGH WIRE SPOOLS AROUND TOP LIMITING MOVEMENT OF THE INTERIOR METAL RING CONTINUES FORM TO THE UPPER BALL, BASE OF FORM BEING SOLD GRAVITY AND REDUCE THE FALLING WHEN BEING MOVED INTERIOR METAL RING CONNECTED MOVEMENT TO ALLOW METAL SPOOL AT THE TOP EXTERIOR SUPPORT RING TO BALL AND ROD MOVEMENT SET OF 4 CASTOR WHEELS, TO LIMIT MOVEMENT FORWARD IN SAME GOLD BRASS AS UPPER UPPER BALL WHICH SPOILS INTERIOR METAL WIRE TO LIMIT MOVEMENT INTERIOR METAL RING, ENCASING METAL WIRE TO ALLOW ROTATION TO CONTROL MOVEMENT
OVERFLOW
2021
THROUGH BLACK INTERIOR RING TOP BALL UNTIL REACHING IT'S END, THE POLE CONTINUES FROM BASE OF THE CREATING STABILITY, LOWER SOLD TO LOWER THE CENTRE OF POTENTIAL OF THE POLES MOVED CONNECTED TO CASTOR WHEEL METAL WIRE TO ROTATE AND TO FORM THE STRUCTURE OF THE MOVEMENT SYSTEM CONNECTED BY INTERNAL RODS FORWARD AND BACKWARDS, CAPPED UPPER BALL AND METAL STRING METAL WIRE, RUNNING THROUGH BLACK INTERIOR RING WIRE SPOOLS AROUND TOP BALL UNTIL REACHING IT'S END, LIMITING MOVEMENT OF THE POLE INTERIOR METAL RING CONTINUES FROM BASE OF THE FORM TO THE UPPER BALL, CREATING STABILITY, LOWER BASE OF FORM BEING SOLD TO LOWER THE CENTRE OF GRAVITY AND REDUCE THE POTENTIAL OF THE POLES FALLING WHEN BEING MOVED INTERIOR METAL RING CONNECTED TO CASTOR WHEEL MOVEMENT TO ALLOW METAL WIRE TO ROTATE AND SPOOL AT THE TOP EXTERIOR SUPPORT RING TO FORM THE STRUCTURE OF THE BALL AND ROD MOVEMENT SYSTEM SET OF 4 CASTOR WHEELS, CONNECTED BY INTERNAL RODS TO LIMIT MOVEMENT FORWARD AND BACKWARDS, CAPPED IN SAME GOLD BRASS AS UPPER BALL AND METAL STRING CONTROL EXTERIOR STRUCTURE 02 31 03 31 04 31 INTERIOR METAL RING CONTINUES FROM BASE OF THE FORM TO THE UPPER BALL, CREATING STABILITY, LOWER BASE OF FORM BEING SOLD TO LOWER THE CENTRE OF GRAVITY AND REDUCE THE POTENTIAL OF THE POLES FALLING WHEN BEING MOVED INTERIOR METAL RING CONNECTED TO CASTOR WHEEL MOVEMENT TO ALLOW METAL WIRE TO ROTATE AND SPOOL AT THE TOP EXTERIOR SUPPORT RING TO FORM THE STRUCTURE OF THE BALL AND ROD MOVEMENT SYSTEM SET OF 4 CASTOR WHEELS, CONNECTED BY INTERNAL RODS TO LIMIT MOVEMENT FORWARD AND BACKWARDS, CAPPED IN SAME GOLD BRASS AS UPPER BALL AND METAL STRING UPPER BALL WHICH SPOILS INTERIOR METAL WIRE TO LIMIT MOVEMENT INTERIOR METAL RING, ENCASING METAL WIRE TO ALLOW ROTATION TO CONTROL MOVEMENT GREENCAST RECYCLED ACRYLIC EXTERIOR SHELL OF VARYING OPACITY AND FINISH CASTOR WHEELS AND SUPPORT STRUCTURE 02 29 POLE FORMS REPEATED THROUGHOUT LEVEL IN BASE LAYOUT VESTIS NEBULA ALUMINIUM AND GREENCAST ACRYLIC VOID FORM, CONTINUES UP THROUGH FLOORS, TO MEET EXISTING CEILING CUSTOM LIGHTING FEATURE, MADE FROM 2M AND 4M DIAMETER ACRYLIC RINGS LIT BY INTERIOR LED LIGHTS 01 31 01 30
REVITTING IDEAS
Program Skill Development
The design for the wine bar and three residential units were for the purpose of having a project which could be built and documented so that revit could be learn. A documentation package including material schedules, technical drawings and perspectives was submitted for the final.
Ai Id Ps Xd Dn A R Revi
2019
Ai Id Ps Xd Dn A R Revi 2019
REVITTING IDEAS
Plan it out
BAR, AN IDEA
Lighting Detail
Through Documentation
Using my studio design for the same term as a basis, I adapted my intentions and scheme for the set layout we were provided. Focusing on layering lighting with more intention into the space and detailing it as a way to better learn how to create RCP’s and design with natural and artificial light in mind.
Ai Id Ps Xd Dn R Revi A 2019
PRODUCED
AUTODESK STUDENT VERSION 840 800 2040 2000 3765 1200 Perspex® Frost S2 7T58 Aurora Violet from Mitchell Group Australia, custom cut and set on rods to allow opening/closing 01 13 PRODUCED BY AN AUTODESK STUDENT VERSION
AUTODESK Flos IC S2 pendant, brushed brass, mouth blown opal glass 2700K Flos IC W2 wall lamp, brushed brass, mouth blownopal glass 2700K Aksel 1 Light Pendant in Brass/Clear 2700K Orion 2 Light Wall Bracket in Brass/Amber 2700K Orion 14 Light Pendant in Brass/Amber 2700K Aksel 4 Light Pendant in Brass/Clear 2700K
BY AN
PRODUCED BY AN
AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
1760 3270 3380 2100 2800 2440 1220 1220 1500 940 850 850 900 900 1270 1500 2600 500 400 500 256 1270 2400 2390 2410 2400 2400 2400 2316 2743 1350 500 500 500 500 500 500 500 2490 1200 1160 270 1450 1015 689,98 1015 200 65 50 80 150 70 180 60 60 180 350 350 60 350 350 240 350 350 210 1500 1425 1425 1500 1315 CL04 CL04 CL04 CL04 CL04 CL04 CL04 CL05 CL05 CL05 CL06 CL06 CL06 CL02 CL02 CL02 CL02 CL04 CL07 EXIT CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL CL C C CL CL CL CL CL CL CL CL CL C CL CL L CL 01 01
900 Rondo joiner 272 used to connect Rondo top cross rail 125 Dulux wash and wear semi-gloss in Purple Wisdom sourced from Dulux and applied to door, frame and wall 01 15
DESIGN, DOCUMENTED
The Full Package
These design documents were a part of a full documentation set created to detail the proposed redesign of a Kirribilli apartment. It consisted of existing, demolished and proposed plans with 1:20 and 1:2 detail drawings of both the bathroom and wardrobe alongside their related schedules.
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT
Ai Id Ps Xd Dn R Revi A 2020
FACULTY OF THE BUILT ENVIRONMENT RED CENTER, WEST WING KENSINGTON NSW 2052 AUSTRALIA WWW.BE.UNSW.EDU.AU LEGEND 01 13 LOUNGE FFL BEDROOM FFL BALCONY FFL = 0 5528 510 3158 400 1940 1265 1465 4073 598 2310 800 3145 4530 1245 885 2677 1535 2042 270 2156 1543 F06 F10 F10 F17 F03 F06 PRODUCED BY AN AUTODESK STUDENT VERSION PROPOSED PLAN PLAN 1:100 01 11 Existing Masonry Existing Concrete Structural Columns FCL +2.25 FFL = 0 2200 500 1050 900 1300 950 2683 1000 2040 2040 900 1193 F10 F17 F06 F06 F10 F03 F10 L12 BEDROOM FFL = 0 BEDROOM FFL = 0
STUDENT VERSION PROPOSED SECTION SECTION 1:100 01 13 PROPOSED ELEVATION 03 PROPOSED ELEVATION ELEVATION 1:100 02 13 FCL = +2.25 FFL 2200 500 1050 900 1300 950 2683 1000 2040 2040 900 1193 F10 F17 F06 F06 F10 F03 F10 L12 F06 BEDROOM 1 FFL = 0 WALK IN ROBE FFL = 0 BEDROOM 1 FFL = 0 LOBBY FFL = 0 HALLWAY FFL = PRODUCED
PRODUCED BY AN AUTODESK
PROPOSED SECTION SECTION 1:100 01 13 PROPOSED ELEVATION 03 PROPOSED ELEVATION ELEVATION 1:100 02 13 2200 500 1050 900 1300 950 2683 1000 2040 2040 900 1193 F15 F10 F17 F06 F06 L10 F09 BEDROOM FFL = 0 FCL = +2700 BEDROOM FFL = 0
PROPOSED SECTION SECTION 1:100 01 13 PROPOSED ELEVATION ELEVATION 1:100 02 13 2200 500 1050 900 1300 950 2683 1000 2040 2040 900 1193 F15 F10 F17 F06 F06 L10 F09 BEDROOM 1 FFL = 0 FCL = +2700 BEDROOM 1 FFL = 0 LOBBY FFL = 0
VERSION
PROPOSED SECTION SECTION 1:100 01 13 PROPOSED ELEVATION ELEVATION 1:100 02 13 FCL +2.25 FFL = 0 FCL +2.7 2200 500 1050 900 1300 950 2683 1000 2040 2040 900 1193 F10 F06 F06 F03 L10 F10 F09 L12 BEDROOM FFL = 0 BEDROOM FFL = 0
PROPOSED SECTION SECTION 1:100 01 13 PROPOSED ELEVATION ELEVATION 1:100 03 13 PROPOSED ELEVATION ELEVATION 1:100 02 13 FCL = +2.25 FFL FCL = +2.7 2200 500 1050 900 1300 950 2683 1000 2040 2040 900 1193 F10 F06 F06 F10 F03 L10 F10 F09 L12 F06 BEDROOM 1 FFL = 0 WALK IN ROBE FFL = 0 FCL +2250 BEDROOM 1 FFL = 0 LOBBY FFL = 0 HALLWAY FFL = PRODUCED
PROPOSED SECTION SECTION 1:100 01 13 PROPOSED ELEVATION ELEVATION 1:100 03 13 PROPOSED ELEVATION ELEVATION 1:100 02 13
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
KE DESIGNS 296 SINGLES RIDGE ROAD, YELLOW ROCK NSW, 2777 0490175694 z5207837@ad.unsw.edu.au FOR REVIEW PROJECT NAME: Project B REV SHEET PAGE NUMBER GENERAL NOTES Comply with relevant authorities and standards when executing the works described in these drawings. Dimensions are in mm and should be confirmed on site. No not scale drawings REVISION DESCRIPTION DATE A FOR REVIEW 2/10/2020 B FOR REVIEW 13/10/2020 C FOR REVIEW 23/10/2020 D FOR REVIEW 23/11/2020 DRAWN BY SCALE DRAWING K.Essex 1:100 Plan REVIEWED BY SIZE DATE J. English A3 23/11/2020 D 11 02 13 LOUNGE ROOM = 0 BEDROOM 1 = 0 WALK IN ROBE FFL = 0 BATHROOM 1 FFL = 0 BEDROOM 2 FFL = 0 BEDROOM 3 FFL = 0 BATHROOM 2 FFL = 0 HALLWAY FFL = 0 KITCHEN FFL = 0 DINING ROOM FFL = 0 HALF BATH FFL = 0 LOBBY FFL = 0 LIFT STAIRS LAUNDRY FFL = 0 D 02 06 07 08 D 05 D 12 03 13 4470 5270 2830 2415 3095 4370 3195 718 519 821 2020 1430 3500 1546 1380 600 R0 1900 922 1022 F16 F01 F10 F10 F03 F06 F03 F04 F09 F01 F07 F08 F08 F09 F06 F09 F09 F03 F01 F00 F09 F12 F13 F09 F03 01 14 POCKET SLIDING DOOR SHOULD HAVE AN ADDITIONAL CLOSING OFF OF THE LOBBY AS A FIRE COMPARTMENT F01 01 25
Masonry Walls Concrete Columns F08 F06 F10 F10 F07 F07 F06 F16 F11 F16 F06 F03 F01 F03 F09 F10 L02 F09 F04 F06 F09 F06 F10 F13 F06 F11 F10 F06 F06 F10 F07 F12 F15 L12 ALL DOORS WILL HAVE HIDDEN FRAMING ACHIEVED BY THE USE OF SOSS HINGES AS DETAILED ON PAGE 23, DRAWING 2 CUSTOME DISPLAY CASING BUILT USING F15 AND GLASS WILL BE CONSTRUCTED IN PLACE OF EXISTING WALL AND SLIDING DOOR BEDROOM 1 WALK IN ROBE FFL = 0 BATHROOM 1 FFL = 0 BEDROOM 2 FFL = 0 BEDROOM 3 FFL = 0 BATHROOM 2 FFL = 0 BEDROOM DINING/HALLWAY FFL = 0 LOBBY FFL = 0 LOBBY FFL = 0 HALLWAY FFL = 0 LOUNGEROOM FFL = 0 KITCHEN FFL = 0
PRODUCED BY AN AUTODESK STUDENT VERSION FCL = +2.25 F08 F10 F10 F07 F07 F06 F15 F03 F06 F03 F06 L02 F09 F04 F09 F10 F13 F11 F10 F06 F06 F10 F12 F15 L12 ALL DOORS WILL HAVE HIDDEN FRAMING ACHIEVED BY THE USE OF SOSS HINGES AS DETAILED ON PAGE 23, DRAWING 2 GLASS WILL BE CONSTRUCTED IN PLACE OF EXISTING WALL AND SLIDING DOOR F18 E14 BEDROOM 1 WALK IN ROBE FFL = 0 BATHROOM 1 FFL = 0 BEDROOM 2 FFL = 0 BEDROOM 3 FFL = 0 BATHROOM 2 FFL = 0 FCL +2400 BEDROOM DINING/HALLWAY FFL = 0 LOBBY FFL = 0 LOBBY FFL = 0 HALLWAY FFL = 0 LOUNGEROOM FFL = 0 KITCHEN FFL = 0
PRODUCED BY AN AUTODESK STUDENT VERSION F08 F06 F10 F10 F06 F16 F11 F15 F16 F06 F03 F01 F03 F09 F10 L02 F09 F06 F09 F06 F10 F13 F06 F11 F10 F06 F10 F07 F12 F04 F15 L12 ALL DOORS WILL HAVE HIDDEN FRAMING ACHIEVED BY THE USE OF SOSS HINGES AS DETAILED ON PAGE 23, DRAWING 2 CUSTOME DISPLAY CASING BUILT USING F15 AND GLASS WILL BE CONSTRUCTED IN PLACE OF EXISTING WALL AND SLIDING DOOR E14 BEDROOM 1 WALK IN ROBE FFL = 0 BATHROOM 1 FFL = 0 BEDROOM 2 FFL = 0 BEDROOM 3 FFL = 0 BATHROOM 2 FFL = 0 FCL = +2250 BEDROOM DINING/HALLWAY FFL = 0 LOBBY FFL = 0 LOBBY FFL = 0 HALLWAY FFL = 0 LOUNGEROOM FFL = 0 KITCHEN FFL = 0
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
Ai Id Ps Xd Dn R Revi A 2020 E03 E04 E07 E08 E09 E10 E11 E12 F03 E05 F20 F03 E02 F04 01 16 17 01 01 19 130 50 190 1731 140 1158 975 4009 883 442 120 1711 120 884 408 122 975 540 1158 467 600 2225 1100 1375 665 700 1275 3235 459 2159 2045 0 F02 01 22 JOINERY TO REST, STOPPING FURTHER MOVEMENT INTO BATHROOM E13 630 02 01 24 E14
PRODUCED BY AN AUTODESK STUDENT VERSION
E04 E07 F06 F02 E02 E03 E09 F01 F15 F07 505 940 30 931 420 20 938 1262 30 20 1169 1350
PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION
STUDENT VERSION
PRODUCED BY AN AUTODESK
DESIGN, DOCUMENTED
The Difficult Spaces
The bathroom was chosen as one of the key areas to detail as the requirements and expectations of these drawings can be of a higher standard due to the range of trades involved and the standards that must be followed. As the documentation package was intended as a high end design, the set required a large range of drawings that showed the full extent of works long with the supporting details that demonstrated a higher level of refinement in the detailing.
239 37 10 25 PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION 10 22 62 45 PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION 29 15 110 13 26 20 PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION
DESIGN, DOCUMENTED
The Difficult Spaces
The design intention of the wardrobe focused on creating a contrast to the harsh industrial bathroom which created a more comfortable space to inhabit which still continuing the focus on metal detailing and the exhibition of the clients collections within more personal spaces for their own enjoyment.
Ai Id Ps Xd Dn R Revi A 2020
KE DESIGNS 296 SINGLES RIDGE ROAD, YELLOW ROCK NSW, 2777 0490175694 z5207837@ad.unsw.edu.au FACULTY OF THE BUILT ENVIRONMENT RED CENTER, WEST WING KENSINGTON NSW 2052 AUSTRALIA WWW.BE.UNSW.EDU.AU FOR REVIEW PROJECT NAME: Project B REV SHEET PAGE NUMBER GENERAL NOTES Comply with relevant authorities and standards when executing the works described in these drawings. Dimensions are in mm and should be confirmed on site. No not scale drawings LEGEND 2100 2100 250 305 R0 600 871 871 668 3114 1265 729 597 131 109 227 1158 690 296 139 F16 F04 28 01 28 01 27 02 29 ADJ. SHELF F03 F15 F15 F00 SHELVING BEFORE FRAMING UP THE CARCASS OF THE WARDROBE PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION REVISION DESCRIPTION DATE A FOR REVIEW 30/10/2020 B FOR REVIEW 10/11/2020 C FOR REVIEW 22/11/2020 DRAWN BY SCALE DRAWING K.Essex 1:20 Plan REVIEWED BY SIZE DATE J. English A3 22/11/2020 C 25 Existing Masonry Walls Existing Concrete Structural Columns Sawn Timber Studs Wardrobe timber/carcass WALK IN ROBE PLAN 1:20 01 25 PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION FACULTY OF THE BUILT ENVIRONMENT RED CENTER, WEST WING KENSINGTON NSW 2052 AUSTRALIA WWW.BE.UNSW.EDU.AU 2210 1050 625 1000 292 117 117 89 39 200 100 200 100 200 100 320 20 25 F20 F15 E13 F07 F07 F15 F19 PRODUCED BY AN AUTODESK STUDENT VERSION ROBE EXTERIOR ELEVATION 1:20 01 27 01 31 DRW HANGING RAIL 1000 2210 20 20 302 297 360 292 117 117 89 39 200 100 200 100 200 100 320 200 200 440 F19 F15 PRODUCED BY AN AUTODESK STUDENT VERSION INTERIOR WITH SHELVING SECTION 1:20 01 28 VERSION
KE DESIGNS 296 SINGLES RIDGE ROAD, YELLOW ROCK NSW, 2777 0490175694 z5207837@ad.unsw.edu.au ENVIRONMENT FOR REVIEW PROJECT NAME: Project B REV SHEET GENERAL NOTES Comply with relevant authorities and standards when executing the works described in these drawings. Dimensions are in mm and should be confirmed on site. No not scale drawings LEGEND ADJ. SHELF ADJ. SHELF HANGING RAIL DRW 1000 1890 20 292 117 117 89 41 1000 219 214 272 DRAWS INCREMENTALLY INCREASING IN SIZE TO SHALLOW TOP DRAWERS DESIGNED TO ALLOW THE HANGING SPACE FOR GARMENTS E13 F07 F07 F15 F19 F15 F15 F19 F19 F15 F20 F19 F19 TIMBER OF WARDROBE PANELS SHOULD HAVE THE PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION REVISION DESCRIPTION DATE A FOR REVIEW 30/10/2020 B FOR REVIEW 10/11/2020 C FOR REVIEW 22/11/2020 DRAWN BY SCALE DRAWING K.Essex 1:20 Elevation REVIEWED BY SIZE DATE J. English A3 22/11/2020 C 27 Existing Masonry Walls Existing Concrete Structural Columns Sawn Timber Studs ROBE INTERIOR ELEVATION 1:20 02 27 01 30 DRW DRW DRW DRW DRW DRW DRW DRW DRW DRW HANGING RAIL HANGING RAIL ADJ. SHELF 1169 350 2210 241 1231 1000 66 116 196 196 375 1055 625 20MM SHADOW GAP AT BASE OF DRAWERS WITH BRASS CAPPING, DRAWING PAGE 29, TO IMITATE EDGING OF BATHROOM STEEL ,F15, FRAMED SHELVING RACK TO HOLD ADJUSTABLE SHELVES MADE FROM INSTALLED TO HIDE EXISTING DRAWING 01, PAGE 20, WITH BRASS 20MM SHADOW GAP AT BASE OF CUPBAORDS WITHIN WARDOBE, DRAWING 01 PAGE 29, TO IMITATE EDGING OF BATHROOM STRUCTURE WITH GRAIN DIRECTION F04 F15 F06 F04 F15 F15 F15 F16 F07 F03 E13 F20 F04 F19 F15 F19 F15 PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION INTERIOR WITH DOOR SECTION 1:20 02 28 PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED
