Porter Model CM-400 is a high performance microprocessor based 4-channel power supply/ control module designed for use with Porter Mass Flow Meters and Controllers. An 8-line, backlit LCD display provides selectable data on the status of the 4 channels simultaneously; low noise, thermal overload protected +15 Vdc device power is provided on each channel. The CM-400 accepts user selectable current or voltage input signals and supplies a selectable setpoint signal for each channel. In addition to the analog I/O, a digital communication port is included for computer/PLC interface. A programmable multichannel blend control and totalizer with batch function allows the CM-400 to precisely interact with Porter MFCs in a versatile and functional gas management system.
Electrical
Input Electrical Characteristics
Voltage Input 0–5, 0-10, 1–5, 2–10 V
Volts Input Impedance 10 K Ohms
Current Input 0–20, 4–20 mA
Current Input Impedance 100 Ohms
Output Electrical Characteristics
Voltage Output 0–5, 0–10, 1–5, 2–10 V
Voltage Output Load 2 K Ohms minimum
Current Output 0–20, 4–20 mA
Current Output Load 0–375 Ohms
Power Supply Output +15 Vdc, 1.4A
Channel Connectors (4)
15-pin female D
Provides signal and power to connected devices
Serial Port
EIA-TIA232D full duplex D9S Load 4.7 K max
Power Supply Requirements
Required Input 100–240 Vac, 47–63 Hz Instrument Power Draw 0.8 W Graphic Display 8-line x 40-character LCD display with backlight Programmable Display Configuration Two
WARNING – USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at www.parker.com/safety.