Published Nationally ®
Southeast Edition $3.00
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
www.constructionequipmentguide.com
November 9, 2016 • Vol. XXIX • No. 23 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
Inside
Southeast Cleans Up After Matthew
Mabe Steel Makes Its Mark on East Coast…8
State Road A1A runs right along the beach, but pounding waves crumbled and then washed away the highway at several spots.
Heavy-duty rain and surf from a hurricane generally means heavy-duty equipment will be called in for repairs. that is certainly the case in the aftermath of Hurricane Matthew, which roared northward up the southeast coast of the United states the second weekend in october. At one point the storm system was rated as a Category 5 hurricane while plowing through the Caribbean. By the time it moved into American waters, it had lost some punch, but was still a dangerous and destructive Category 3. the effects of Matthew on the entire southeastern United states will undoubtedly last for several months, as the storm killed dozens and did an estimated $8.1 billion in damage. Another $2 billion in damage was inflicted on the western Caribbean nations, most grievously in Haiti, which counted at least 1,600 dead as the storm churned across its southwestern coast on the morning of oct. 4. days later, Matthew took dead aim on the U.s. coast before systematically hitting Florida, Georgia, south Carolina and north Carolina. All four states saw destruction and loss of life, but none worse than the tarheel state. Hundreds of roads and bridges were chewed up or simply washed away by record-breaking
By Eric Olson
CEG CorrEspondEnt Area Contract ors Attend Backhoe Rodeo…12
Case Unv eil s G S erie s Wheel Loader s…22
Attachment & Parts Section ......................................37-43
AtLAntA (Ap) A com-
Recycling Section ........53-63 Business Calendar ............86 Auction Section ............90-97 Advertisers Index ..............98
pipelines in Georgia is planning public hearings in Augusta and Atlanta. the hearings will include testimony and comments from the public, the Augusta Chronicle reported. Feedback from the hearings will then be considered as the Joint state Commission on
petroleum pipelines recommends changes to Georgia’s process of evaluating petroleum pipelines, officials said. A hearing in Augusta is set for nov. 3 at the Columbia County government building. Another hearing is planned for nov. 17 in Atlanta. the time and place for the Atlanta hearing haven’t been announced.
AssoCIAtEd prEss
Gov. nathan deal appointed the 13-member committee to include three state representatives, three state senators, the director of the Environmental protection division of the department of natural resources, the commissioner of community affairs, one member representing the petroleum industry and four see PIPELINES page 26
see PROJECTS page 26
Georgia to Evaluate Pipelines
Truck & Trailer Section ........ mittee evaluating petroleum ......................................45-49
By Melinda Deslatte BAton roUGE, La. (Ap) Gov. John Bel Edwards’ administration is stalling hundreds of millions in construction projects planned for state financing to instead steer more money to state building and university repairs and roadwork. the Bond Commission signed off on the plans oct. 20 without objection. nearly $267 million in projects will be bumped in line, like park improvements, parish water system upgrades and lawmakers’ local projects, while $68 million in new projects will advance ahead of them. the new projects to win financing include more than $15 million for repairs to state buildings, $14 million for maintenance of public college campus facilities and $36 million for the statewide highway program — priorities that Edwards established when he ran for office last year.
see MATTHEW page 64
Table of Contents ................4
Funds Steered to Roadwork in Louisiana
Page 2 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GEORGIA Buford 678.318.9500 Savannah 912.964.8079
You demand quality in your work. Your work demands quality in your machines.
SOUTH CAROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060
NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710
TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845
NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309
Volvo is with you. That means a product you can depend on. A dealer you can rely on. A commitment to helping you do what you do – better. Smart Works – every day. We do it through innovation and technology. We do it in partnership with you so that the people that depend on you keep working and progressing. Contact your local ASC Construction Equipment today for dependable Volvo Excavators.
ascvolvo.com
Smart Works.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 3
GEORGIA Buford 678.318.9500 Savannah 912.964.8079
SOUTH CAROLINA Nor th Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060
You’re serious about getting your bonus. And your crew thanks you.
Our line of pavers and compactors sets the standard for reliable asphalt paving. We have a long h i s to r y o f p r o v e n te c h n o l o g y a n d a r e p u t a t i o n f o r i n d u s t r y - l e a d i n g i n n o v a t i o n . W h e n i t c o m e s to ma ximizing your earnings, these machines deliver.
NORTH CAROLINA A sheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710
Track DENSITY IN REAL TIME. PASS:
4
TEMPERATURE:
250°
D E N S I T Y:
PA S S :
5
TE M P E RATURE :
220°
DENS I T Y:
95.1%
94.2%
TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845
PASS:
2
TEMP ER AT U R E:
270°
DE NSI T Y:
92.6%
Volvo Intelligent Compaction (IC) with Densit y Direct . Volvo has changed the game. Density Direct provides actual density calculations in real time — eliminating guesswork and reducing core sampling. Improve mat quality, do it in less time, get your bonus, and win more contracts with V Vo olvo Density Direct. Learn more at volvoce.com/DensityDirect.
ascvolvo.com
Page 4 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE
SOUTHEAST EDITION Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands
To read these stories and many more, visit www.constructionequipmentguide.com
12
FEATURES 8
MABE STEEL MAKES ITS MARK FROM MAINE TO MISSISSIPPI
The company has recently completed several sizable projects, including a 1.4 million sq. ft. Dollar Tree Distribution Center in Cowpens, S.C., and an 800,000 sq. ft. Polo Ralph Lauren Distribution Center in Kernersville, N.C.
12 AREA CONTRACTORS ATTEND COMPANY WRENCH’S BACKHOE RODEO Company Wrench, the JCB Dealer of North and South Carolina held a backhoe rodeo at its Lexington, S.C., facility on Oct. 27.
8
22
The new rules for lease accounting approved by the Financial Accounting Standards Board (FASB) are scheduled to take effect for financial periods starting after Dec. 15, 2018, for public companies and after Dec. 15, 2019, for private companies, with a modified application for any other financial period presented.
56 CAT F SERIES MACHINES FEATURE DESIGN ENHANCEMENTS
60 CEMCO ENABLES EFFICIENT RECYCLING
70 RETIRED CATERPILLAR INC. CHAIRMAN, 18 CROWDS GATHER FOR PERMIAN BASIN INTERNATIONAL OIL SHOW Odessa, Texas, was once again the site for the Permian Basin International Oil Show on Oct. 18 to 20 at the Ector County Convention Center.
CEO, GLEN BARTON PASSES AWAY AT 77
60 MORBARK HOSTS 10TH DEMO DAYS EVENT
Glen Barton, former Caterpillar Inc. chairman and chief executive officer (CEO), died Oct. 24 in Peoria, Ill., at age 77.
92 ALEX LYON & SON HOSTS AUCTION IN
60 FIRM CUTS BETTER PATH TO AFTERMARKET PRICING WITH SYNCRON
KISSIMMEE, FLA.
22 CASE UNVEILS G SERIES WHEEL LOADERS AT TOMAHAWK FACILITY Case Construction Equipment unveiled its new G series wheel loader to the press at its 500-plus acre Case Tomahawk Experience Center located in Tomahawk, Wis.
A wide variety of equipment was available from a number of manufacturers, including Kobelco, Hitachi, Komatsu, Doosan, Cat, Hamm, Genie and many more.
94 EURO AUCTIONS BOASTS VARIETY OF
30 MINEXPO 2016 OFFERS THE LATEST IN MINING EQUIPMENT MINExpo 2016 was held in Las Vegas, Nev., from Sept. 26 to 28. Manufacturers displayed the latest in mining equipment, innovative technology and solutions.
32 ARTBA LAUNCHES SCTPP PROGRAM TO MITIGATE ONSITE RISK The American Road & Transportation Builders Association (ARTBA) has launched a groundbreaking professional certification program developed by safety leaders from some of the nation’s top transportation infrastructure firms, the insurance industry, organized labor and government.
EQUIPMENT AT NEWNAN SALE Euro Auctions U.S.A. conducted an absolute auction at its permanent facility in the Atlanta suburbs of Newnan, Ga., on Oct. 26.
96 JOEY MARTIN HOSTS LIQUIDATION AUCTION IN BLAIRSVILLE, GA. The liquidation auction was held for a contractor looking to downsize after completing a project.
RECYCLING SECTION 53 LIVE DEMOS HIGHLIGHT MB CRUSHER’S
36 NEW LEASE ACCOUNTING RULES: 8
PRESENCE AT MINEXPO
62 SENNEBOGEN ELECTRIC-DRIVE SUPPLIES WORRY-FREE POWER
DEPARTMENTS 86 BUSINESS CALENDAR 88 CLASSIFIEDS 90 COMING AUCTIONS
EQUIPMENT 37 TEREX UTILITIES Stand Alone Core Barrel 37 CATERPILLAR Tilt Buckets 45 CUMMINS X Series Engine
STEPS TO HELP TRANSITION Founder, Publisher & CEO Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.
Edwin M. McKeon Sr. Richard C. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910
www.constructionequipmentguide.com
Web site
Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com
Mobile
YouTube
Richard C. McKeon
Kent Hogeboom
Rich Olivier
Jim Van Natta
Dale Agnew
• North & South Carolina • Tennessee • Virginia
National Sales Manager
• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida Panhandle
• Florida • Virgin Islands • Puerto Rico
770/443-3174 Toll Free 800/409-1479 Fax 770/443-3176 e-mail rolivier@cegltd.com
Toll Free Fax e-mail
• Louisiana Toll Free 877/877-4997 Fax 972/719-2611 e-mail dagnew@cegltd.com
Toll Free Fax e-mail
704/553-8888 800/288-4234 704/553-8899 rmckeon@cegltd.com
315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial
407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com
material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 5
Get More Done At May Heavy Equipment, we’re devoted to helping you get more done. By providing the tools needed for construction, mining and more since 1997, we’ve grown to become the Southeast’s reliable source for heavy equipment rentals, sales, parts and service.
GET DIRTY
866-629-3784 Columbia, SC • Charleston, SC • Greenville, SC • Lexington, NC
866-629-3784 Columbia, SC • Charleston, SC • Lexington, NC • Raleigh, NC
Page 6 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your local dealer: ASC Construction Equipment USA, Inc.
Flagler Construction Equipment, LLC
Augusta, GA 706.793.4726
Daavie, FL 954.581.4744
Buford, GA 678.318.9500
Ft. Myerss, FL 239.481.8554
Forest Park, GA 770.319.0074
Jacksonville, FL 904.737.6000
Saavannah, GA 912.964.8079
Lake City, FL 386.758.7444
Charlotte, NC 704.494.8100
Miami, FL 305.477.2442
Charlotte, NC 704.596.8283
Orlando, FL 407.850.9614
Garner, NC 919.661.8710
Orlando, FL 407.659.8700
Greenville, NC 252.754.5280
Tampa, FL 813.630.0077
Mills River, NC 828.687.0620 Bismarck, ND 701.250.4882 Fargo, ND 701.271.2360 Minot, ND 701.839.4020 Cayce, SC 803.791.0740 N. Charleston, SC 843.414.1120 Piedmont, SC 864.704.1060 Chattanooga, TN 423.308.7940 Knoxville, TN 865.525.1845 Cowin Equipment Company Inc. Birmingham, AL 205.841.6666 Madison, AL 256.350.0006 Mobile, AL 251.633.4020 Montgomery, AL 334.262.6642 Oxford, AL 256.832.5053 Pensacola, FL 850.479.3004
McClung-Logan Equipment Companyy,, Inc. Bridgeville, DE 302.337.3400 Baltimore, MD 410.242.6500 Chesapeake, V VA A 757.485.3314 Richmond, VA VA 804.266.0000 Manassas, V VA A 703.393.7344 Roanoke e, V VA A 540.989.3750 Winchester, V VA A 540.722.3700 Wise, V VA A 276.328.8027 Scott Equipment Companyy, LLC Alexandria, LA 318.448.1647 Baton Rouge, LA 225.293.3683 Broussard, LA 337.837.2907 Lake Charles, LA 337.433.9811 Monroe, LA 318.388.9300 Shreveport,t LA 318.226.9171 St. Rose, LA 504.461.0961 Jackson, MS 601.373.4600 Laavergne, TN 615.793.3888 Memphis, TN 901.547.8008
Our Volvo E-Series excavator has allowed us to do things that are just plain amazing.
That’s our Ex Factor. – Jim Whitaker, fleet manager, Whitaker Construction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 7
Whitaker Construction has more than 60 years’ experience in underground construction. As one of the largest utility contractors in their region, region, they ha av ave to operate with a cutting edge. Jim says the EC380E gives them that edge — working up to a 480 class size, while fitting in tighter spaces — allowing them to tackle ckle challenging jobs with more efficiency. Find tips to get the most from your exca avvator at vvolvoce.com/ExFactor olvoce.com/ExFactor.
Page 8 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Mabe Steel Makes Its Mark From Maine to Mississippi In 2007, Bryan Mabe, a successful entrepreneur, offered to help his father-in-law, Ron Stroupe, because he was retiring from the industry. Stroupe’s request came at an ideal time — Mabe had recently sold his mobile automotive restoration business, which marketed directly to car dealerships. His kind gesture eventually evolved into a successful steel erection business — Mabe Steel Inc. of Kernersville, N.C. While he was working with Stroupe, he met a subcontractor on a job that could not handle an upcoming project. Mabe saw an opportunity and asked him if he could take on the job. “He basically said yes, or he’d give me a smaller job to do before that,” said Mabe. “We were in Pennsylvania working —that was in January 2007, and he had another job coming up about an hour away from where we were in Pennsylvania. A subcontractor he just hired backed out of the job, so there was an opportunity and I jumped on and started laying metal decking — that’s what we did for him initially.” However, within eight months the subcontractor retired, and Mabe — with the help of two employees — began traveling the country, installing metal decking on industrial distribution centers and various other structures, subcontracting through other structural steel erectors. While Mabe was working for other companies, he noticed a need for quality erectors, so he began pursuing his own steel erection proj-
ects in the latter part of 2009. The company also purchased its first forklift and began setting steel. A year later, Josh Church came on board after working with Mabe’s father-inlaw. Church also had experience in the steel erection business. “In January 2010, Josh reached out to me with an idea about partnering up together and moving forward with my business,” said Mabe. “I knew that going forward I needed a good man around me so we joined forces in January of 2010. At that stage, I was just getting started doing steel erection work. I had just stopped working on metal decking, and started subbing whole jobs from steel fabricators or general contractors. In 2010, we hit the steel erection side of this business pretty hard. We went after as much work as we could.” Today, Mabe Steel Inc. completes steel erections on industrial and retail building projects from Maine down to Mississippi, including all of the southeastern states. The company has recently completed several sizable projects, including a 1.4 million sq. ft. Dollar Tree Distribution Center in Cowpens, S.C., and an 800,000 sq. ft. Polo Ralph Lauren Distribution Center in Kernersville, N.C. The company also will tackle smaller shopping centers, and Mabe said the company recently completed shopping centers in Sevierville, Tenn., which totaled 250,000 sq. ft. “We just recently did a Bass Pro job right
around Chattanooga, Tenn. We have worked a lot in Tennessee, and that shopping center in Sevierville has a Dick’s Sporting Goods, Hobby Lobby, Staples, Mattress Firm and many other retail locations. We are getting ready to go to Nashville, Tenn., for a 1 million sq. ft. distribution center for Lowes Home Improvements.” Mabe Steel Inc. uses a small fleet of cranes on these projects, including its newest purchase — a Link-Belt TCC-750 75-ton telescopic crawler crane from Pinnacle Cranes. The company already owned a Link-Belt HTC 8650 series II and a Manitex 40124S. Mabe said there were several reasons why he purchased his newest LinkBelt. “We wanted a telescopic crawler, and they make about four models,” said Mabe. “We
chose the TCC-750 model because it’s the highest capacity model that Link-Belt makes and still ships in two loads. The house ships, and all the counterweights ship on separate loads, so we knew we wanted a telescopic crawler. That crane fit our system better because it’s easier to move.” According to Mabe, when his crew unloads the Link-Belt TCC-750 off the truck, the crane hydraulically spreads out to 17 ft., and the crane can be hauled with its tracks attached, which saves him time on projects. “The biggest reason we bought it is because we don’t have to move the crane in the traditional sense,” said Mabe. “We don’t have to jack outriggers up and move the outriggers to the new location — we simply see MABE page 78
This 2016 Link-Belt TCC-750 crane is ideal for the company’s work. Mabe Steel Inc., based in Kernersville, N.C., is run by Bryan Mabe (L) and Josh Church.
Mabe Steel Inc. has an updated fleet of machines to deliver the best service for its customers. This 2016 Mack CHU613 is used just about every day to transport the company’s cranes to different jobs.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 9
Kobelco Excavators
Parts for Any Make, Any Model
Call the location nearest you today! When you need us, where you need us Tampa
Tallahassee
Jacksonville
Orlando
Fort Myers
Pompano Beach
Equipment • Parts • Service
www.gsequipment.com
Page 10 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NEW UNUSED EXCAVATORS Just Reduced!
2007 KOMATSU D65PX-15EO, 4843 HRS, 70% U/C, CAB, A/C, MULTI SHANK RIPPER, EXCELLENT CONDITION...................................... ............$79,900 OR $75,000 WITH OUT RIPPER
COMING SOON!
2006 KOMATSU PC160LC-7KA, 4803 HRS, 36” BKT W/PROGRESSIVE LINK HYD. THUMB 50% PLUS U/C VERY GOOD COND, JOB READY ........ ..............................................................$79,900
2016 JCB 407, NEW UNUSED COUPLER, BUCKET & FORKS, CAB W/AC, KOHLER DIESEL, AVAILABLE FOR IMMEDIATE DELIVERY........................................................$58,000
NEW UNUSED 2016 CASE CX130D, 36” BUCKET, AUX HYD, HYD COUPLER, REAR CAMERAS, ISUZU POWER USES DEF FLUID ONLY NO RE-GEN..................................................$97,500
(2) 2007 TEREX TA30G7, GOOD CONDITION................................................................................$65,000 EA. ONE LEFT!
$79,500
Guy Roof 2091 Bishop Rd. • Greensboro, NC 27406
336-382-9715 2014 NEW UNUSED SANY SY135C, AUX. HYD. BLADE, ISUZU DIESEL. IN STOCK FOR IMMEDIATE DELIVERY........................................$89,500
2014 NEW UNUSED CASE 821F, MICHELIN 23.5 2015 KOMATSU PC138US-10, 594 HRS, DUAL R25 TIRES, 4.5 CY GP BKT, RIDE CONTROL, AUX HYD, 40” BKT, CAMERA, ROAD LINER OR AUX. HYD. REAR CAMERA, IN STOCK FOR STEEL TRACKS AVAILABLE, LIKE NEW$115,000 IMMEDIATE DELIVERY ........................$165,000
cecarolinasinc@aol.com Free Delivery within 200 Miles!
BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!
(301) 372-0083 Shipping & Containerization Available
WE BUY TRUCKS!
WWW.BRANDYWINE-EQP.COM Unused 1998 Cat 963B, EROPS, 98” Bucket, Good U/C, Strong Runner! Stock# 579l ..................................................$27,500
New Witzco Lowboys, Customization Available, 3000 Hrs, 35-50 Ton in Stock ......................................................$Call
(2) Available
(6) Available
2013 Deere 450J LGP, 1027 Hrs, OROPS, Factory Warranty Avail., Like New!..........................................$83,500 1988 Champion 710A, EROPS, Scarifier, 12’ Moldboard, Cummins Engine, A/C & Heat ....................................$21,900 Ea.
2012 Volvo EC250D LR, 4624 Hrs, 60’ Reach, 60” Bkt, A/C & Heat, Tier 4, Stock# 719H ..........................$165,000
2016 Case 221F, 7 Hrs, EROPS, Aux Hyd, Hyd Q/C............................$67,400
‘98 & ‘99 Tamrock CHA550 Crawler Drills, 16’ Mast, 11’ Boom, Hyd. Leveling, Dust Collectors ....$29,900 EA.
Low Hours
2012 Cat 320EL, 3000 Hrs, Mechanical Thumb, New Chains & Sprockets, Rear Camera, Medium Stick, Stock# 320El .. ................................................$129,900
2012 Cat 312EL, Mechanical Thumb, Tier 4, Stock# 749H..................$124,500
2006 Cat 345C LME, 14,058 Hrs, 72” Bkt, Counterweight Removal Device, 152I..........................................$105,000
2016 Cat 262D Skid Steers, 37 & 60 Hours, EROPS, Air Conditioning, Hands Free Q/C Bucket, Aux. Hyd, Cat Buckets ..................................................$42,900
(2) 2011 Cat 336DL, Both under 4,500 Hrs, Aux Hyd, Hyd Q/C, SBG Pads, Straight Travel, 12’10” & 10’8” Stick, Work Ready! ....................$195,000 Ea.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 11
is pleased to announce www.powerequipco.com
we are now the authorized dealer for
rubber track crawler carriers
Discover the Difference Terramac®, LLC is a manufacturer of rubber track crawler carriers with a focus on increased versatility and easy maintenance. We offer a full line of crawler carriers serving a variety of industries such as pipeline, general construction, environmental, drilling, utility, mining and more.
RT14
RT14
R
RT9 R 4 1 T R
RT14
RT9
Discover the Difference
Page 12 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Area Contractors Attend Company Wrench’s Backhoe Rodeo
C
ompany Wrench, the JCB Dealer of North and South Carolina held a backhoe rodeo at its Lexington, S.C., facility on Oct. 27. Many area contractors attended the event, which featured the JCB 3CX backhoe. Door prizes were awarded and a hearty barbecue lunch was served. Company Wrench has locations in Raleigh and Columbia and 10 locations throughout the eastern half of the United States. The company offers the full line of JCB backhoe loaders, wheel loaders, skid steer loaders, compact tract loaders, compaction equipment, telescopic handlers and hydraulic excavators. For more information, visit www.companywrench.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG see RODEO page 80
Steve Gorsuch and Rebecca Yates, both of JCB, answer questions about JCB telehandlers.
The operator likes the smooth responsiveness of the controls.
Neil Williams (R) of Company Wrench goes over the JCB 3CX backhoe with George, Katie and Cana Wilson of Wilson Farm in Kershaw, S.C.
(L-R): Charlie Murphy, Julius Lybrand and Kenny Bickley, all of Mid-Carolina Electric Cooperative in Lexington, like the ease of access into the cab of the JCB compact track loaders.
(L-R): Youssef Benjemaa and Randy Tinley, both of JCB, give operating tips to John Marc Hall of Lide Plumbing in Newberry, S.C.
Ken Hanna (R), Hanna Farms in Lake City, S.C., currently owns a JCB backhoe and asks Billy Wall of Company Wrench about other items in the JCB product line.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 13
Pre-Owned Equipment Liquidation 6R, 7R & 8R Tractors Contractor Attachments Pull Scraper Applications Box Blade Applications
Rental Program Lease Program Finance Program Eddie Claxton (706) 871-2555 elcaxton@flintequipco.com
Page 14 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 15
Introducing the GP3, the World’s Most Intelligent Paver Announcing Our New Distributor in Arizona
info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347
ARROW EQUIPMENT
BLANCHARD MACHINERY
GREGORY POOLE
Serving Western North Carolina (800) 277-2080 CarolinaCat.com
Serving South Carolina (844) BLANCHARD (252-6242) BlanchardMachinery.com
Serving Eastern North Carolina (800) 447-3112 GregoryPoole.com
Page 16 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 17
Page 18 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Crowds Gather for Permian Basin International Oil Show
O
dessa, Texas, was once again the site for the Permian Basin International Oil Show on Oct. 18 to 20 at the Ector County Convention Center. Held every even-numbered year, the show is a mainstay in the Odessa/Midland, Texas, area. Visitors come from all over the world to see the latest in equipment and technology. Construction Equipment manufacturers and dealers were among the 744 exhibitors. see OIL page 34
Yellowhouse Machinery Co. displayed the full line of John Deere construction equipment, including the 850K dozer. (L-R) are Brad Downing, Burt Stringer, Eric Schiel and Reid Layton, all of the Yellowhouse Odessa branch.
(L-R): Kirby-Smith’s Kevin Demel, Odessa, Texas; Britt Stubblefield, Amarillo, Texas; and Lonnie Stuart, Lubbock, Texas, couldn’t wait to talk about the Komatsu 65WX dozer.
(L-R): Greg Miller, John Kelly and Jim Miller, all of Permian Tractor Sales, Odessa, Texas, and Kyle Dauth of Case represent the Case Construction line.
(L-R): Lee Hanson and Karl Van Cleave of ASCO Equipment’s Odessa, Texas, branch along with Buddy Goodman of Volvo CE man ASCO’s booth at the Permian Basin Oil Show.
Brian Stubbs, general manager of Air Compressor Solutions of Odessa, Texas, displays his line of Doosan Portable Power equipment.
The Atlas Copco gang was all over the RD20 oil and gas drill rig. (L-R): John Wolfe, Russel Gold of WSJ; Delaney Erickson, Tyler Williams of Venture Drilling; Peter Redaelli, Michelle Pettit, Ray Shelor, Todd Armstrong of Venture Drilling; Ray Kranzusch and Shane Lein.
Brian Hall (L) and Randy Hayes of Vacuworx demonstrate their vacuum lifter attached to a Komatsu 360 excavator at the Kirby-Smith exhibit.
(L-R): TJ Sparks, Vanity Rojas and Vernon Bruton of Cisco Equipment are eager to talk about LinkBelt’s 300x4 excavator.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 19
Page 20 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Brentwood, NY
www.ironhorseequip.com (800) 999-6044 or (631) 273-1893 Fax: (631) 273-2418
ironhorseequip@msn.com Equipment • Hammers • Parts Attachments • 24/7 On Job Service 2007 CATERPILLAR 320DL HYDRAULIC EXCAVATOR, CAB: 9’7” STICK, AUX HYD., 44” BKT, HYD. CAT QUICK COUPLER, PLUMBED FOR HAMMER , 32” PAD, GOOD U/C W/ 50% WEAR REMAINING, EXCELLENT CONDITION
2007 CATERPILLAR M315D, 10368 HRS, A/C,HEATER, AUXILIARY
Specializing in all your hydraulic hammer needs worldwide
Rockblaster Hammers
1985 INGERSOLL-RAND ECM350, DRIFTER VL140, READY TO WORK
1992 INGERSOLL-RAND ECM490, 5352 HRS, CUMMINS, READY TO WORK
2004 CATERPILLAR 430D IT BACKHOE LOADER, EROPS, 4WD, 4X1 FRONT BKT, EXTEND-A-HOE, PILOT CONTROL, AUX HYDRAULICS LINE, 30" BACKHOE BKT, QUICK CONNECT, FRONT TIRES LIKE NEW, AND GOOD REAR TIRES, EXCELLENT CONDITION, CALL FOR PRICE
2008 CATERPILLAR 950H WHEEL LOADER, EROPS CAB, HEATER, A/C, HYD QUICK COUPLER, LIGHTS, WIPERS, MIRRORS, AIR RIDE SUSPENSION SEAT, RADIO, RIDE CONTROL SYSTEM, STEERING WHEEL, 4X1 BKT W/ BOLTON CUTTING EDGES, 23.5 X 25 TIRES THAT ARE 70%, CAT C7 ENGINE @ 196 NET HP, EXCELLENT CONDITION
2007 SULLAIR 750H, 4383 HRS, CAT DIESEL C9, 150PSI , SERVICED, JOB READY
2010 CATERPILLAR 450E, STK #: S2374-2, 10019 HRS, 4WD, EROPS
2005 CATERPILLAR 330CL HYDRAULIC EXCAVATOR, EQUIPPED WITH: CAB, LONG STICK (13'), 48" HEAVY DUTY BUCKET, 32" PADS, 40% UNDERCARRIAGE, VERY GOOD CONDITION
1988 DYNAPAC CA25D, 2825 HRS, 84" SMOOTH DRUM, CAT 3208, PRICE $22,800
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 21
IMAGINE WHAT’S NEXT. Register today to get the ultimate view of where asphalt is going. Imagine learning the latest innovations in warm-mix asphalt. Imagine new techniques to make roads smoother. Imagine seeing what’s next from over 2,500 exhibitors spread out over 2,500,000 square feet. Imagination becomes reality in Las Vegas on March 7–11, 2017—and if you make your reservation right now, you can ensure your spot at this huge event... and save!
Get the special $149 rate (and save up to $100) by registering early at www.conexpoconagg.com.
March 7–11, 2017 | Las Vegas Convention Center | Las Vegas, USA
IF IT’S NEW, IT’S HERE.
Co-located with
®
Page 22 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Case Unveils G Series Wheel Loaders at Tomahawk Facility Case Construction Equipment unveiled its new G series wheel loader to the press at its 500-plus acre Case Tomahawk Experience Center located near Tomahawk, Wis. The unveiling kicked off with a presentation by Andrew Dargatz, brand marketing manager, wheel loaders, Case Construction Equipment. “This is a very exciting time for many groups throughout CNH Industrial,” said Dargatz. “Our teams represent the best in hydraulics thermal engineering, ergonomics, and our teams have been perfecting SCR engine technology both in on-road and off-road technology for years. Our world-class manufacturing plant in Fargo, N.D., and of course our commercial group work with dealers and customers to better understand market demand and opportunities. Our groups work together as a cohesive team to ensure that the G Series wheel loaders lowers the total cost of ownership.” The all-new G Series wheel loader line consists of seven new models scaled for a variety of applications, from supply yards, building construction and agriculture, to quarries and mass excavation. These loaders address key factors to lower the total cost of ownership. Productivity and Efficiency “Wheel loaders are the ultimate production machines, said Dargatz. “Whether they are running 12 or 14 hours a day in batch plants, pits and quarries, loading trucks at feed lots all day at corporate dairy farms or keeping us safe, running all day and all night in the coldest of conditions plowing streets and parking lots.” With this in mind, Case designed the G Series wheel loader FPT engines that feature SCR technology to meet Tier IV Final standards. Case was the first to introduce SCR into heavy construction equipment and has the industry’s most practical SCR experience in the field, according to the manufacturer. Each loader leverages the best in hydraulic and electronic technologies to fully optimize machine output and performance, providing a comprehensive solution that achieves exponential fuel savings compared to the competition
and older equipment. These systems combine to provide the operator with a choice of four operating modes that best match engine output to application, ensuring the machine only expends as much fuel and power as required for the job. SCR also allows the engine to breathe cooler and cleaner, ensuring optimal productivity and helping to minimize wear associated with excessive heat and the see CASE page 24
Jeff Jablonski, Tomahawk product promotion specialist, goes over the features of the Tier IV Final FPT F4HFE613 engine in the 821G wheel loader.
Andrew Dargatz, brand marketing manager, wheel loaders, Case Construction Equipment, goes over the features of the Case 1121G wheel loader.
Robb Coenen, Case product promotion specialist, — touts the Tier IV Final engine featuring Selective Catalytic Reduction (SCR) engine technology of the Case 621G wheel loader.
The press event featured an opportunity to test the new G Series wheel loader line.
The all-new G Series wheel loader line consists of seven new models scaled for a variety of applications.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 23
Genuine quality, no compromise Tried, tested and proven protection for your engine You want to give your engine the best possible protection. 6US` 7LYRPUZ ÄS[LYZ HYL KLZPNULK HUK KL]LSVWLK [V TLL[ 7LYRPUZ L_HJ[ LUNPUL ZWLJPÄJH[PVUZ [OLU YPNVYV\ZS` [LZ[LK PU YLHS SPML JVUKP[PVUZ [V LUZ\YL SVUN SHZ[PUN WLYMVYTHUJL :V ^O` JVTWYVTPZL& *OVVZL 7LYRPUZ ÄS[LYZ L]LY` [PTL
www.perkins.com
Page 24 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Caterpillar’s Doug Oberhelman Terex Announces Leadership Receives ARTBA’s Highest Honor Change in Cranes Segment Doug Oberhelman, chairman and chief executive officer of Peoria, Ill.-based Caterpillar Inc., is the sole recipient of the American Road & Transportation Builders Association’s (ARTBA) highest honor — the “ARTBA Award.” It was presented to Oberhelman Oct. 6 during the association’s national convention, held in Tucson, Arizona. Established in 1960, the “ARTBA Award” recognizes individuals for outstanding contributions that have advanced the broad goals of the association. Over the years, recipients have included several governors, more than 25 U.S. senators or representatives, two U.S. secretaries of transportation and dozens of top leaders and executives from government and the private sector of the transportation construction industry. “In volunteer leadership positions, speeches, and media interviews, Doug Oberhelman stands out as one of the business community’s most forceful and articulate advocates on the need for boosting federal investment in transportation infrastructure,” ARTBA President and CEO Pete Ruane said. Oberhelman’s role as chairman of the Business Roundtable (BRT) and in the development of BRT’s September 2015 report titled “Road to Growth: The Case for Investing in America’s Transportation Infrastructure” helped keep the heat on Congress to complete action on the December 2015 highway and transit law — the FAST Act. Over many years, Caterpillar also has been a key supporter of ARTBA’s advocacy and communications programs. The company’s group president, Rob Charter, is a member of ARTBA’s executive committee. In addition to his legislative advocacy, Oberhelman was recognized for his distinguished service and volunteer leadership roles, including past chairman of the National Association of Manufacturers. He is vice president of the Wetlands America Trust, a member of the Nature Conservancy’s Latin America Conservation Council, and chairman of the board for the Easter Seals Foundation of Central Illinois. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Steve Filipov will assume the role of president of Terex Cranes effective immediately. Filipov also will continue with his responsibilities as president of the Terex Material Handling and Port Solutions segment until completion of the announced sale of that segment to Konecranes Plc. Ken Lousberg, currently president, Terex Cranes, will be leaving the company to pursue other opportunities. “We thank Ken for his dedicated service and leadership over many years within the AWP segment, Terex China and his current position with Terex Cranes, and wish him the best in his future endeavors,” said John L. Garrison Jr., president and chief executive officer. Commenting on the new assignment for Filipov, Garrison added, “Steve is the right person to lead the turnaround efforts to improve our global cranes business. Steve started his career at Terex in the company’s crane business and served as president of Terex Cranes from 2004 to 2008. Steve’s intimate knowledge of the Terex Cranes business, its products and, most importantly, its customers will put him in an excellent position to start
immediately with the work of improving and growing our cranes business. Steve has demonstrated strong leadership skills during his tenure with Terex and I am confident that in his new responsibility as president of Terex Cranes he will serve us and our customers well. “In addition, Kevin O’Reilly, currently vice president, operational finance, will assume the position of group vice president, finance for the cranes segment assisting Steve with the cranes turnaround. Mr. O’Reilly has held a number of senior finance roles at Terex over many years including corporate controller, segment finance leader, business development and strategy, and investor relations. Kevin’s strong operational finance experience and achievements make him the ideal choice to provide the financial leadership and support that Steve and the entire cranes team need as they position cranes for success.” For more information, call 203/2227170 or visit www.terex.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
New G Series Wheel Loaders Feature SCR Technology CASE from page 22
possibility of thermal events. As an aftertreatment system, there is no recirculation of gasses, no excessive exhaust temperatures related to burning off captured particulate matter and no downtime for regeneration. With the exception of adding diesel exhaust fluid (DEF), there are no new or intensive maintenance activities required of the system. This all results in a greater percentage of the machine’s power and fuel burn going to productive efforts, according to Case. Overall Quality of Operation The G Series wheel loaders feature the most intuitive, comfortable and easy to operate/manage environment of any Case wheel loader ever produced. Inspired heavily by automotive design, the new cab features the latest in electro-hydraulic controls, ergonomic design and operator interfaces that make operation simpler and more efficient. This includes a solid-state controller that provides software control over electrical power distribution and basic vehicle functions — all while eliminating fuses and relays, and significantly lowering the amount of wiring throughout the machine. A
membrane keypad replaces a series of rocker switches for common machine functions, and a new steering console mimics the driver controls — from lights and wipers to turn signals — found in most cars/trucks, according to Case. “The G Series leverages ergonomics to improve operator comfort, combat operator fatigue and overall increases the operator’s
efficiency and productivity and provides the intuitive practical technology that allows the operator to quickly climb in the cab understand all the benefits and resources at their disposal, ” said Dargatz. A new, one-piece rounded windshield, a rear grid defroster and redesigned external mirrors increase visibility to all sides of the machine. These loaders also feature an all-
Guests play in the dirt and test the capabilities of this Case 921G wheel loader.
new HVAC system that achieves the fastcab cool-down, and excellent heating/defrosting/defogging capabilities. The operator environment is further accentuated with new automotive-style plastics on the inside that are more durable and resistant to scratches, and easier to clean. A new Bluetooth radio with full streaming, see CASE page 78
The Case 521G wheel loader features a standard limited slip differential that equally supplies torque to each side of the axle and automatically applies additional torque to the gripping tire.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 25
7
ntoo Sa Savings avvings in Shift Shiff t IInto
KUBOTA KUBO TA A SALES EVENT
Call Jeremy for Service & Brian for Parts.
704-233-4242 800-443-7569
We Specialize in Quality One Owner & Late Model Machines! REDUCED PRICE
Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm
2011 Komatsu WA250-6
3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com
6325 Hrs, ROPS, JRB Q/C with Bucket, Cold A/C
Low Rate Financing Available. Call us for details.
GRZQ $ 3 5 ¿QDQFLQJ IRRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD 69/ 6HULHV HTXLSPHQW LV DYDLODEOH WR TXDOL¿HG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUV¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU ¿QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH ¿QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIIHHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ IHU H[SLUHV 6HH XV IRRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIH IRU PRUH LQIRRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ
kubota.com
© Kubota Trractor Corporation, 2016
www.kubota.com
$74,900
2015 CASE 721F 308 Hrs, Quick Coup. Like New! Ready to Work!
$159,900
FAE - 300/SC Stump Cutter NEW
STUMP CUTTER QUICK SPECS: s #UTTER 7HEEL v X v s #UTTER 7IDTH v s #UTTING $EPTH v s #UTTING (EIGHT v s 1TY #ARBIDE 4EETH s (0 2EQUIREMENT MIN MAX s &LOW '0s 0RESSURE 03) s 7EIGHT LBS TRACTOR QUICK SPECS: s %NGINE *OHN $EERE (& (0 s 5NDERCARRIAGE "ERCO $ OSCILLATING s 4RACK 3HOES ,'0 v s 'ROUND 0RESSURE 03) s (Y 3YSTEM $ANFOSS s 7EIGHT 7 / HEAD )BS
The new 300/SC Stump Cutter is designed and built for prime mover carriers. This powerful attachment tool is equipped with a Danfoss hydraulic motor (51V250) and an aggressive cutting wheel consisting of 36 carbide teeth to power its way through stumps. The frame is designed to operate safely in all environments.
2013 Genie S45 165 Hrs, Deutz Engine. 4WD, Like New Lift. Ready To Work!
$59,900
2005 Sterling Acterra Loaded Down and Ready to work! Cold A/C, Air Brake, Stellar 9620A Crane 8600lbs. 20’ reach, Knapheide Service Bed, Miller Bobcat 250 welder, 115 hrs, Hyd. Outriggers, Hyd. Air Compressor w/Hose Reel
$39,900
2015 CASE 580SN 570 Hrs, E-Hoe, Hyd. Q/C Bucket & Forks. One Owner! Like New!
$77,500
FAE USA INC. 2AFE "ANKS $R s /AKWOOD )NDUSTRIAL 0ARK s &LOWERY "RANCH '! 0H s &AX s INFO FAEUSA COM
www.interstateeq.com N. Seymour Dr., Thomson, GA 30824
(706) 595-1550
Page 26 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Have Pumps, Will Travel 2014 CA AT T 320E 485 HRS S/N TNJ00293
EEXCAVATORS XCA V A TORS
»
WHEEL LOADERS
$135,000 MA20490
2012 CA AT T 930H 4114 HRS S/N DHC03794
Customer Service 1-800-451-0769 www.hollandpump.com
VVisit isit ButlerIRON.com Butler IRON .com
2012 012 CA ATT 308E 2746 2746 HRS
S/N GMK00307
»
1994 CA ATT 936F 8AJ01435 MC21543......................................... $32,000 1996 CAT CAT 938F 1KM01738 MA22146 ......................................... $33,000 2012 CA ATT 930H DHC03607 MA16625 .................................. $121,500 2012 CA ATT 938K SWL00371 MA21618 ................................... $157,500 2007 KOMA ATSU WA320 A33243 MB20480 ................ $78,500 2008 KOMA ATTSU WA250 A76034 MA20303 ................ $83,500 2010 DEERE 544K 631818 MA20811.................................. $126,500
Ft. Myers, Jacksonville, Pensacola, Orlando, Tampa, Walterboro, West Palm Beach
MA22084
2011 CA AT T D6TXL 2014 HRS
CA ATT 312DL XGK00498 MA16488 ............................ $115,000 CA AT T 316E DZW00617 MA19759 ................................... $161,500 CA ATT 305E XFFA04058 MA22537................................... $70,000 CA ATT 311F RR KCW00234 MA20528 ................................ $150,000
»
2012 2012 2014 2015
$81,000
MJ003730
1998 2008 2010 2004
S/N GBJ00612
TRACK T RACK TY TYPE PE TTRACTORS RACTORS
»
CA ATT D6R LGP 9PN00794 MA07617 ........................ $57,500 CA AT T D6T XW DJG00324 MA21470 ........................... $154,500 CA AT T D7E MDB00151 MA16776 ................................ $289,000 KOMA ATSU TSU D155AX 76067 MA19713 ................. $99,500
»
Easy 3rd party financing with great rates for 12-48 months
$215,000
MJ003798
»
Holland Pump manufactures, sells, rents, repairs Holland Pump manufactures, sells, of rents, repairs and services pumps for a wide range applications and services pumps for a wide range of GPM. applications with capacities from 500-150,000 with capacities from 500-150,000 GPM.
$172,000
»
Finish Faster Faster with with Finish Holland Pump! Pump! Holland
QUALITY Q UALIT Y USED EQUIPMENT E Q UIPMENT
MOTOR GRADERS
»
1996 CA AT T 140H 2ZK01480 MB16759 .................................. $76,500 2001 CA AT 143H AWD 1AL00879 MK003555....................... $69,000 2005 CA AT 140H APM02461 MA16794 ................................ $115,000 2008 CA AT 140M AWD B9M00177 MA20713................... $110,000 2009 CA AT 140M AWD W B9G00160 MA20714 ............. $130,000 2007 DEERE 772D 615464 MB13626.................................. $95,000 2009 DEERE 770G 625360 MA21115 ......................... $115,000
$92,500 MA22539 MA22539
2001 CA AT T 140H S/N 2ZK06048
$110,000 MA21616
2014 CASE 621F 5588 HRS S/N NEF221482
Call Bill Bauer or Austin Calavera at 888.344.2973
NO RT H D A KO TTA A | | SO U T H D A KO TTA A
E X P E R I E N C E T HE BUT L E R DI F F E R E N C E
Louisiana to See Road, Building Repairs PROJECTS from page 1
Mark Moses, director of Edwards’ Office of Facility Planning and Control, said the reshuffling accounts for Louisiana’s ongoing financial problems and tries to more closely match lines of credit to available dollars, while also focusing on items of importance to the governor. Louisiana borrows money through bond sales to investors to pay for much of its state-financed construction work. Moses said the state is expected to have about $900 million to $950 million to spend on projects over the next few years through the construction budget, known as the capital outlay budget. Already more projects are approved and in the queue than those available dollars, so the Edwards administration will have to slow some work to keep spend-
ing in check. House Ways and Means Chairman Neil Abramson, D-New Orleans, said the decision-making reflected a simple fact: “We just don’t have the money to deal with all the projects that are proposed.’’ Abramson unsuccessfully tried to shrink the size of the construction budget bill during the legislative session earlier this year. Rep. Tony Bacala, R-Prairieville, said he supported efforts to more closely match the construction budget to available money. But he described it as “disturbing’’ that the governor got to pick the winners and losers since lawmakers overstuffed the bill. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Officials to Hold Hearings in Augusta, Atlanta PIPELINES from page 1
members representing a cross-section of the interests of local government, business, agriculture and conservation. The bill, which prompted creation of the committee, imposed a moratorium on construction of petroleum pipelines through July 2017, the nonprofit Savannah Riverkeeper organization said in a news release. That legislation,
supported by Savannah Riverkeeper, helped defeat Kinder Morgan’s proposed $1 billion Palmetto Pipeline. Kinder Morgan’s pipeline plan upset many Georgia property owners along the 360-mi. (579 km) path from Belton, S.C., to Jacksonville, Fla. It was forced to negotiate a price with each one when Georgia’s transportation commissioner
rejected the company’s request for power to seize rights of way in court, with a judge deciding the compensation, a process known as eminent domain, the Augusta newspaper reported. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 27
MAXIMIZE MA XIMIZE
YOUR YOUR PRODUCTIVITY
info@dressta.com www.dressta.com www .dressta.com ENGINEERED FOR Mining | Road & Highway | Construction | F Forestry orestry | Landfill
TD TD-8 -8
TD-9 TD-9
TD-10 TD-10
TD -14 TD-14
TD-15 TD-15
TD-20 TD-20
TD TD-25 -25
TD-40 TD-40
Page 28 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Legoland: First Brick in Dubai’s Southern Expansion By Jon Gambrell ASSOCIATED PRESS
DUBAI, United Arab Emirates (AP) A massive amusement complex in Dubai’s southern desert opened its first park on Oct. 31 — a Legoland with interlocking plastic blocks that both model the sheikhdom’s architectural wonders and represent the first bricks laid in developing the expanse. Much of the planned Dubai Parks & Resorts project worth over $3 billion remains under construction along the dusty highway connecting Dubai to the United Arab Emirates capital of Abu Dhabi. In four years, however, Dubai’s rulers envision 25 million people coming to the area as part of the 2020 World Expo, or world’s fair. Dubai already has plans to one day handle more than 200 million passengers a year at the nearby Al Maktoum International Airport at Dubai World Central, as well as extend its driverless metro into these dunes far past its current terminus near the massive Jebel Ali Port. “A lot of things are happening already; we are not on our own,’’ Legoland Dubai general manager Siegfried Boerst told The Associated Press. “It’s not that we’re in the desert anymore.’’ Previously, the limits of tourist-friendly Dubai ended when the tall towers of the Dubai Marina gave way to the industrial expanse of power plants and aluminum smelters in the city-state’s south. Now, both private and state-backed developers are rushing into the area ahead of the World Expo. One of the biggest bettors on the area is Dubai Parks & Resorts, which plans a series of attractions over 9.5 sq. mi. (25 square km). Beyond Legoland, the complex plans a movie-themed Motiongate park, a Bollywood park, a hotel and shopping district and even a Six Flags by late 2019.
The company, trading under the name DXB Entertainments, lists its biggest shareholder with a 52-percent stake as Meraas, a firm backed by Dubai ruler Sheikh Mohammed bin Rashid Al Maktoum. Qatar Holding LLC, a subsidiary of Qatar’s sovereign wealth fund, holds 11 percent of the company, according to data from the Dubai Financial Market stock exchange. The firm’s stock closed down 6 percent Monday to 43 cents a share. Dubai, already home to the long-haul airline Emirates, luxury malls and the world’s tallest building in the Burj Khalifa, already is a tourist draw. Authorities hope to have 20 million tourists visit a year by 2020, up from 14.2 million
overnight visitors last year. Part of that involves broadening out Dubai’s tourist charm from just hard-partying adults. Legoland fits into that, as does the recently opened IMG Worlds of Adventure indoor amusement park. “There is so much more for the kids,’’ said Andrew Whitt of St. John’s in Newfoundland, Canada, who took his family to Legoland on Monday. “It’s nice to have more of this environment rather than just sit on a beach.’’ But his family’s quick duck inside an air-conditioned portion of the park showed the challenge facing the amusement complex. While Dubai is cooling down for the winter, its scorching summertime temperatures easily reach above 104 F with high humidity. Parts of Legoland offered covered walkways, but others involve walking in direct sunlight. “We designed Legoland specifically with the climate of the Middle East in mind,’’ Boerst said. “There’s shade all over the place, so people don’t need to be outside in the heat for a long time.’’ And inside the air-conditioned cool of the park’s Miniland, the park’s more than 60 million Lego bricks can be seen in models of Dubai International Airport, Abu Dhabi’s Sheikh Zayed Grand Mosque, the Dubai Creek and even a version of India’s Taj Mahal. One can even walk down a Lego-version of high-rises towering over the dozenlane Sheikh Zayed Road in Dubai, complete with a running metro line. At the center is a 58 ft.-tall replica of the Burj Khalifa, made of 439,000 Legos that took more than 5,000 hours to construct — complete with a skydiving Lego mini-figure. “It’s amazing. I’m an adult but I feel like a kid right now,’’ said Rajashree Vichare of Mumbai, India. “I want to play with every Lego toy right now.’’ (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Climate Challenge Funds Environmental Research Two new research projects that aim to reduce CO2 emissions have been selected to receive funding from the Construction Climate Challenge initiative, hosted by Volvo Construction Equipment. The Construction Climate Challenge initiative (CCC), which promotes sustainability throughout the entire construction industry, has awarded funding to two innovative research projects that intend to reduce climate impact in construction. The chosen projects are the Implementation of Procurement Requirements for Sustainable Collaboration in Infrastructure (Impres) and the Carbon Infrastructure Transformation Tool (CITT) from the Swedish Royal Institute of Technology and the University of Edinburgh Business School, respectively. The CCC has been funding research studies since 2014, and in spring 2016 the initiative launched a new call for major research projects. By supporting and initiating research projects in relevant areas of construction, the CCC acts as a bridge between the industry and sustainability research.
“Research is an important part of the CCC and can help us to reduce CO2 emissions in the construction industry,” said Peter Wallin, CCC research manager and technology research manager at Volvo Construction Equipment. “The knowledge that exists today is not enough; we must come up with new solutions and methods on how we can work toward a sustainable future and meet existing challenges.” The Impres Project The Impres project aims to contribute to a more efficient implementation of policies and goals for reducing climate impact from the infrastructure sector, specifically focusing on procurement requirements and the role of international systems for sustainability assessment. The research project is cofunded by the Swedish research council Formas, through the ProcSIBE project. The project partners are the Swedish Royal Institute of Technology (KTH), Lund University of Sweden, WSP Group and Skanska.
The CITT Project The CITT project is developing a tool for construction companies to identify and reduce carbon in the construction supply chain. The project seeks to advance and implement a tool to aid the alignment of supply chain actors through the efficient design of incentives and the articulation of key carbon management challenges. The tool will demonstrate the embodied carbon and cost impact of each material element used in the creation of an infrastructure asset (identified through the bill of quantities), and will help to drive emission reductions by identifying opportunities to reduce carbon through innovation and supply chain engagement. The research project partners are the University of Edinburgh Business School in Scotland and Costain Group. Powering Social Change “We received inquiries from some of the best universities and research institutes in the world, making it difficult to choose which
projects to fund,” said Wallin. “The two we chose are considered to have the greatest global effect. We hope the research projects will increase understanding of the existing challenges within the industry and contribute to a clear guidance for reducing CO2 emissions as well as the necessary steps to reach climate goals.” More Information The Construction Climate Challenge is an initiative hosted by Volvo Construction Equipment to promote sustainability in construction industry and provide funding for environmental research. The CCC is part of the Volvo Construction Equipment commitment to WWF’s Climate Savers Program. Volvo Construction Equipment is a Corporate Advisory Board member of the World Green Building Council. For more information, visit http://constructionclimatechallenge.com/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 29
704-888-1114 • Fax: 704-888-2377 NOW RENTING EQUIPMENT IN THE CHARLOTTE, NC METRO AREA 1334 Hwy 24/27 Midland, North Carolina sales@wilcoxtractor.com • www.wilcoxtractor.com
1.866.643.1010 ClearSpan.com/ADCEGSE
AGGREGATE EQUIPMENT-SCREEN (3) 2016 EZYSTAK W5032, Portable Rail Stacking Conveyors ............................................................................$15,900 EACH 2006 EXTEC 6000, portable, 1229 hours, arriving soon, Stk# 3327 ..............................................................................$58,500 2000 MULTITEK 605B, Portable 5’x6’ trammel, JD Diesel, Folding Discharge Conveyors, Good Running Condition $39,500 2000 SCREEN USA HM35D2, Portable Screen w/hopper, grissly, shaker screen & Discharge conveyor, JD Diesel Power, portable ................................................................................................................................................................................$22,900 COMPACTORS 1996 CAT CS-563C, 84” Vib Smooth Drum, Good Tires, ROPS, Stk# 3277..................................................................$33,900 LOADERS 2003 CASE 580M TURBO, EROPS 4x4, Extendahoe, New Tires ....................................................................................$25,000 DOZERS 2006 CAT D9T, EROPS, SU/Tilt Blade, Excellent U/C, Rear C/W, Low Hrs....................................................................$235,000 2000 CAT D8R, New pivot shaft seal/bearings, new hardbar pins and bushings, new paint decals, excellent work ready machine, Stk# 3178 ..........................................................................................................................................................$115,500 2007 CAT D5G LGP, ROPS, PAT Blade, Engine Enclosures, 60% U/C, original paint, very good running machine, Stk# 3331 ............................................................................................................................................................................$48,500 2011 JOHN DEERE 850K WH, EROPS, PAT Blade, Excellent Condition, Stk# 3338....................................................$109,500 2008 KOMATSU D51PX-22, low hours, EROPS, AC, PAT Blade, 28” Shoes, super clean, straight tight machine, 4808 hrs., Stk# 3404 ............................................................................................................................................................................$79,500 EXCAVATORS 1994 CAT 330LC, Long 12’8” Stick, 36’ Shoes, 48” GP Bkt, Strong Motor & Pumps, Tight Turntable, Excellent Appearance, Stk# 3294 ............................................................................................................................................................................$59,500 2006 CAT 330CL, 12’6” Stk, Aux. Hyd, 34” Shoes, Very Good Cond, Stk# 3336 ..........................................................$59,500 1997 CAT 330BL, 12’8” Stick, 36” Shoes, 54” GP Bkt, Very Good U/C Strong Motor & Pumps, Excellent Appearance, 12,800 Hrs, Stk# 3324 ........................................................................................................................................................$68,500 2005 DEERE 330C LC, 54” GP Bkt w/QA, Tight Turntable, VG U/C, Stk# 3264..............................................................$49,500 2010 DEERE 160D LC, AC, Aux. Hyd., 3-24” TGO, 36” GP Bkt, very tight, strong running machine, Stk# 3308........$59,500 2010 DEERE 200D LC, low hours, Aux. Hydraulics & Hydraulic Thumb, 32” shoes, 45” GP BKT, pattern changer, excellent condition, 5301 hrs., Stk# 3340 ........................................................................................................................................$71,500 2007 KOMATSU PC138US LC-8, EROPS, AC, Dozer Blade, Aux, Hyd., 28” TGP, reverse camera, excellent condition, Stk# 3312......................................................................................................................................................................................$43,900 2007 KOMATSU PC78US-6, EROPS, AC, Dozer Blade, 18” Rubber Track, Super clean machine, Stk# 3315 ............$33,900 2006 KOMATSU PC78MR-6, Swing Away Boom, New Track Chains & Sprockets, Aux Hyd, AC Cab, Dozer Blade, 18” Steel Shoes w/Street Pads, (2) 12” & 30” GP Bkts, Pattern Changer, Nice Excellent! Stk# 3319 ..........................................$33,900 2005 LINK-BELT 135LX, EROPS, AC, Dozer Blade, Aux. Hyd., 24” TGP, low hours, clean machine, Stk# 3309 ........$49,500
FORKLIFTS / LIFTS / OTHER 1999 CASE 586E, 60,000 LB FORKLIFT, low hours, sideshift, 3 stage mast, good running condition, Stk# 3317....$15,900 1999 GENIE S40 MANLIFT, 4x4, 40’ 2 section boom, Duetz Diesel, power to platform, Hydraulic rotation, excellent working machine, Stk# 3174 ............................................................................................................................................................$13,900 2008 GEHL DL12H40 12,000 LB TELEHANDLER W/OUTRIGGERS, 40’ Lift, Hyd. Leveling, Stk# 3239 ....................$32,500 2006 JLG 1930ES SCISSOR LIFT, 500, 19’ lift height, 25’ work height, excellent condition, 2 available, Stk# 3171....$4,900 2005 TEREX AL4060D-4MH, portable diesel 4 light plant/generator, very good condition, Stk# 9207..........................$3,500 GRADERS 2004 CAT 14H, Front Push Block, 16’ MB, 20.5x25, Stk# 3228....................................................................................$129,500 2002 CAT 14H, Front Push Block, 14’ MB, 20.5x25, Stk# 3229....................................................................................$124,500 OFF HIGHWAY TRUCKS 2000 VOLVO A25C, very good 23.5R25 tires, straight body, good brakes, work ready, #3335....................................$39,500 2006 CAT 740 RETARDER, AC Heated Box, Bedliner, Emergency Steering, very good 29.5R25 tires, good brakes,no leaks, work ready #3334................................................................................................................................................................$89,500 1998 CAT D350E, 6x6 retarder, good 26.5R25 tires, original paint, good running and operating machine, Stk# 3290 ............ ..............................................................................................................................................................................................$37,500 2005 DEERE 300D, Tailgate, AC Cab, very good 23.5R25 Tires, Retarder, super clean truck, Stk# 3274....................$72,500 2002 DEERE 250D, AC Cab, Retarder, Tailgate, 23.5R25 Tires, Super Clean, Very Good Running Condition, Stk# 3269 ............................................................................................................................................................................$69,500 GENSETS / SKID LOADERS 2013 HI-POWER HRJW310T6, Portable 310KVA, JD Diesel, Insulated Cabin, Very Good Condition, Stk# 3131 ......$35,500 2011 HI-POWER HRYW50T6, Totally New Generator, Portable 50KVA, 4 Cyl. Diesel, 120/480V, 3 Phase, Sound Suppression Cabinet, Excellent Condition, Stk# 3183 ......................................................................................................$12,900 GENSETS / PUMPS 2007 PIONEER 6 IN, 6” portable trash pump, low hours, Deutz Diesel, very good condition, 1826 hrs, Stk#: 3326 $14,900 SKID STEERS-TRACK 2006 BOBCAT T190, CAB W AC, AUXILLARY HYDRAULICS, 90% RUBBER TRACKS, GOOD RUNNING MACHINE! Hours: 3,077, Horse Power: 66, Operating Capacity: 1,900 lb ....................................................................................................$23,900 2002 CAT 257, low hours, 4 in 1 bkt, very good tracks, runs & operates very well, #3332..........................................$24,900 2003 ASC POSI-TRACK MD2810, very low hours, skeleton Bucket with grapple, good tracks, very nice running machine.... ..............................................................................................................................................................................................$17,900
WE MANUFACTURE t WE INSTALL WE SAVE YOU MONEY BUILDINGS OF 1,000 USES
Fabric Structures
Hybrid Buildings
Foundation Solutions
ZERO PERCENT FINANCINGG AAVAILABLE AVVAILABLE
RESTRICTIONS R ESTTR ICT I ONS MAY MAY APPLY A PPLY
2017 summit & condex January 10-13, 2017 | Chicago, IL | Hyatt Regency Chicago
Focus on Your Dealership and Maximize your Business Opportunities New to our 2017 Summit, AED is featuring professional dealer education sessions on Tuesday, January 10 - Thursday, January 12! AED wants to provide a convenient program for attendees to grow and develop skills unique to the construction equipment industry. With each session, there are tremendous opportunities to expand on existing knowledge while learning new, valuable information to take back to your dealership. Visit www.aedsummit.com to view all of the on-site educational options available and to register for the 2017 Summit.
Summit Keynote Presentations
Dick Cheney
Former U.S. Vice President & Secretary of Defense
Daymond John Founder & CEO of FUBU and Investor on ABC’s Shark Tank
Richard Picciotto FDNY Chief & Highest 5DQNLQJ )LUHͤJKWHU WR Survive the World Trade Center Collapse
Page 30 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MINExpo 2016 Offers the Latest in Mining Equipment,
M
INExpo 2016 was held in Las Vegas, Nev., from Sept. 26 to 28. Manufacturers displayed the latest in mining equipment, innovative technology and solutions. Exhibits covered more than 840,000 sq. ft. (78,038.5 sq m), outpacing MINExpo 2012. According to the website, MINExpo is widely recognized as the premier exposition of mining equipment and services in the world, featuring a wide range of new product introductions and exhibits of equipment parts and services for the global mining industry. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG Nicklas Berggren, senior engineer of Atlas Copco, traveled from Sweden to promote the new Smartroc series.
Warren Lafoy, sales manager of Ultra Seat Corporation, Edmonton Alberta, Canada, informs event goers that the company has been manufacturing industrial seating for more than 20 years.
Ryan Benbo, senior director of marketing of Vermeer, exhibited at the Center Hall and reported having a great show. Amelia Pearce, global marketing director of Ahern Rentals, Las Vegas, Nev., displays the latest high-reach equipment.
Jason Penland of McElroy demonstrates the new Tracstar 1200 for large pipe applications. The Tracstar 1200 has advanced emission control technology that meets EPA Tier IV standards.
Becky Fellows (L), director of marketing, and Brad Huie, regional sales manager of Allmand, presented the company’s mobile light towers.
Putzmeister’s Alejandro Monastrio (L), regional sales manager, and Marc Aguilar, vice president of Latin America sales, present the company’s 14000 concrete pump.
Sayuri Tsuji (L) and Jonathan Tolomeo, product managers of Komatsu, display Komatsu’s latest 930E electric drive truck.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 31
Innovative Technology at Las Vegas Convention Center
(L-R): Dominic McNamara, owner of AU Equipment, Arizona dealer of MB Crusher, and Frank Kurnik and Kyle Taylor, area managers of MB Crusher, Reno, Nev., are on hand to give live demonstrations of the crusher bucket. MB Crusher hauled in 200 tons (181 t) of rock for the demonstrations.
(L-R): Minnie, Kevin and Tony Beets of Discovery Channel’s “Gold Rush” and Ian Harvey, director of publicity of Volvo, celebrate the company’s 50th anniversary with the Volvo Golden Hauler.
John Hall (L) and James McKnight of Caterpillar want expo-goers to see the Caterpillar 777G (Tier IV). The new G series represents a new era for this size class from Caterpillar.
Jenifer Golba, general manager of global marketing, Goodyear, displays tires for mining machines.
(L-R): Melinda Clayton, Mike Sheppard and Jackie Whitt of Klein Products are ready to share information with attendees.
Mark Strebel, division manager of Martin Engineering, demonstrates the latest innovations in the handling of bulk materials cleanly and safely.
Topcon Positioning Systems exhibited in the Center Hall with Joel Frost, eastern regional sales manager.
John Deere Power Systems exhibited in the North Hall with Darren Almond, Global Drivetrain business manager.
Page 32 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ARTBA Launches SCTPP Program to Mitigate Onsite Risk The American Road & Transportation Builders Association (ARTBA) has launched a groundbreaking professional certification program developed by safety leaders from some of the nation’s top transportation infrastructure firms, the insurance industry, organized labor and government. The “Safety Certification for Transportation Project Professionals” (SCTPP) program is aimed at the thousands of transportation project supervisors, foremen, inspectors, project planners and designers who could make a huge, industry-wide safety impact by learning core competencies necessary to identify and mitigate potentially life-threatening onsite risks. The SCTPP program also is intended to create a “safety benchmark” for all future civil engineering and construction management program graduates who are interested in employment with industry-leading firms. “Ensuring that our project sites are the safest possible environments for all who work in and travel through them can’t just be the safety director’s job,” said ARTBA Chairman David Zachry, president and CEO of the Zachry Corporation in San Antonio, Texas. “There are no safety ‘accidents.’ There are safety incidents. And we need to do our best to prevent them. It is our moral obligation and it is good business practice.” Zachry, who has been a driving force behind development of the SCTPP program, added: “Our goal, collectively working through ARTBA and its foundation, is to cause a demonstrable reduction in the number of deaths and injuries that occur on and around transportation project sites each year. We believe we can do that if all of the key decision makers, from project inception through completion, have safety top of mind. This program will identify and reward those who
president and CEO of Austin Industries in Dallas, Texas, one of the nation’s largest diversified construction firms with an annual volume of $2 billion and over 7,000 employee-owners. Joining Walls and Myers as SCTPP commissioners are top leaders from the transportation project planning, design and materials sectors, government, organized labor, and the trucking and insurance industries. They are: • Deputy Secretary of the U.S. Department of Transportation Victor Mendez; • WSP│Parsons Brinckerhoff President and CEO of the U.S. Central & South America Greg Kelly; • Ash Grove President and COO Randy Vance; • Recently retired Texas Department of Transportation Occupational Safety & Health Director Jerral Wyer; • Laborers’ International Union of North America Training & Education Fund National Apprentice Director James Urtz; • Cargo Transporters Inc. Director of Safety Jerry Waddell; and • Liberty Mutual Insurance Group Technical Director of Risk Control Services Don Tolbert. Ex-officio, non-voting members of the commission include: • Zachry Corporation President and CEO David Zachry, who also is the 2016 ARTBA chairman; • Astec Industries Executive Vice President and COO Rick Dorris; • HNTB Holdings Ltd. President Paul Yarossi; • ARTBA President and CEO Pete Ruane; and • ARTBA Executive Vice President and COO Bill Toohey. The ARTBA Transportation Development Foundation (ARTBA-TDF) engaged Professional Testing Inc., an internationally-recognized consulting firm specializing in helping industries and government agencies develop and manage effective, fair, valid, reliable and legally defensible assessment and evaluation services to work with industry safety leaders in develDavid Zachry oping the SCTPP program. It has been designed to meet the rigorous protocols Zachry Corporation required for accreditation by the American National Standards Institute (ANSI) and the International Organization for Standardization ISO/IEC 17024. Identification of the target audience, core have demonstrated competency in this critical management competencies to be tested, and development of the exam area.” questions themselves has involved key safety personnel ARTBA recruited a high-level, independent certification from: Zachry Construction, Lane Construction, Granite commission to establish operational policies to guide the Construction, the Kiewit Infrastructure Group, Oldcastle SCTPP program and provide leadership, governance and on- Materials, The Vecellio Group, Barriere Construction, going oversight. Superior Construction, Liberty Mutual Insurance, the Arch The nine-member commission is co-chaired by Ross Insurance Group, the Laborers’ Health & Safety Fund of Myers, CEO and chairman of Allan Myers Inc., the largest North America, the Texas Department of Transportation, the civil construction and materials supply firm in the Mid- National Institute for Occupational Safety & Health, Virginia Atlantic region, based in Pennsylvania, and David Walls, Tech, The Center for Construction Research & Training,
“There are no safety ‘accidents.’ There are safety incidents. And we need to do our best to prevent them. It is our moral obligation and it is good business practice.”
Plastic Safety Systems, InVia Pavement Technologies, and Mobile Barriers. The two-and-a-half hour SCTPP exam has up to 120 multiple-choice questions. They probe knowledge in assessing project risks, creating project safety plans, implementing and conducting on-going evaluation of a site-specific operational safety plan and conducting incident investigations. The ARTBA-TDF is now accepting applications for the exam, which will be administered nationwide at Pearson
“Our goal, collectively working through ARTBA and its foundation, is to cause a demonstrable reduction in the number of deaths and injuries that occur on and around transportation project sites each year.” David Zachry Zachry Corporation
VUE testing centers, via the SCTPP website, www.puttingsafetyfirst.org. The test will be offered during three windows in 2017: (Jan. 16-Feb. 17, March 13-April 14 and Oct. 16.-Nov. 17). The application and exam fee is $500. To be eligible to sit for the exam, candidates must meet one of the following eligibility requirements: Option 1 1. Three years’ full-time or equivalent experience* in the transportation construction industry. 2. Completion of an OSHA 30 or 510 course. Option 2 1. Bachelor’s degree in engineering or construction management with two years’ experience* in the transportation construction industry. 2. Completion of an OSHA 30 or 510 course. Option 3 1. Associate or technical degree in safety with two years’ experience* in the transportation construction industry. *Experience is defined as a job classification including, but not limited to, laborer, operator, foreperson, superintendent, project manager, construction manager, engineer, safety professional, risk manager, inspector, surveyor, or estimator. Internships qualify as experience. Experience must be within five years of applying for certification. Upon passing the exam, the professional certification will be valid for three years. Recertification will require documented, continuing learning on the topic and retesting. To learn more about the SCTPP program and to access “FAQs” on it, visit www.puttingsafetyfirst.org, or contact ARTBA Senior Vice President of Safety & Education Brad Sant (bsant@artba.org) at 202/289-4434. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 33
Page 34 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available All Include Slugs and O'Rings.
For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com
www.flangelock.com
TR AM AC
KEEP YOUR BELTS FULL. Ř 0RXQW D 7UDPDF 5RFN %UHDNHU DW \RXU SULPDU\ Ř $YRLG JDSV LQ SURGXFWLRQ Ř 5HDFK LQ TXLFNO\ WR EUHDN DQG FOHDU EULGJHG DQG EORFNHG PDWHULDO Ř (QVXUH VDIHW\ ,QFUHDVH SURGXFWLRQ DQG UHOLDELOLW\ Ř 7UDPDF LV D \HDU ROG IDPLO\ RZQHG FRPSDQ\ :H VSHFLDOL]H LQ 5RFN %UHDNHU (QJLQHHULQJ 0DQXIDFWXULQJ 6DOHV DQG 6XSSRUW
TRAMAC
800-526-3837
www.tramac.com
Oil Show Displays Latest in Equipment, Technology
Kirby-Smith dominated a portion of the outside exhibition area. OIL from page 18
The show has survived the ups and downs of the oil industry since 1940, and now occupies an important position in the industry internationally. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Warren CAT’s huge display was a busy place. Ron Mullens (C), salesman, Warren CAT, discusses finance options with Ryon Vestel (L) and Summit Hogue of Capital Asset Resources.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 35
Page 36 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Lease Accounting Rules: 8 Steps to Help Transition By Ralph Petta PRESIDENT AND CEO, EQUIPMENT LEASING AND FINANCE ASSOCIATION
The new rules for lease accounting approved by the Financial Accounting Standards Board (FASB) are scheduled to take effect for financial periods starting after Dec. 15, 2018, for public companies and after Dec. 15, 2019, for private companies, with a modified application for any other financial period presented. While organizations may be aware of the pending changes, many are not up to speed in their progress in transitioning to the new accounting standard, known as Accounting Standards Codification Topic 842 (ASC 842). The new FASB standard will modify the accounting for all leases which are in effect during the transition period. This means that although the standard applies to financial periods starting after Dec. 15, 2018, it will require a restatement for the financial reporting of prior periods also. Who Will Be Impacted Lease accounting changes affect both lessee and lessor organizations. Many lessors also act in the capacity of a lessee and thus may have the need to have lessee-oriented lease accounting functionality in place. While lessee accounting will change much more so than lessor accounting, the analytical process that both lessees and lessors should go through may be similar. Additionally, many lessors that are subsidiaries of other companies, such as banks and manufacturers, may be called upon by their parent organizations to assist in analyzing their own leases where they are acting as a lessee. Lastly, agreements other than leases also will be examined since they may very well be construed to either contain a lease or to be a lease under ASC 842. Various surveys conducted after the new standard was approved showed that a majority of companies were only in the early stages of preparation to implement it. Another showed that less than 10 percent of companies have systems in place to comply with the new rules. Given that the new lease accounting rules may impact different parts of an organization, people will need to be engaged and policies, processes and procedures ramped up to meet the challenges. Accordingly, the Equipment Leasing and Finance Association has compiled some high level steps that both lessees and lessors may consider following in the transition to the new lease accounting standard. 1. Start NOW. Initial steps should include budgeting time and resources to perform the work. This includes determining which resources will be sourced internally and which shall be outsourced. The time estimated to make the transition is up to a year domestically and up to 24 months for a global program. 2. Designate the project team. This team will oversee the transition process, establish timelines and be responsible for timely, effective project completion. The team should be comprised of representatives that lease equipment, administer leases or use information regarding leases. The team is likely to come from the finance/treasury, lease administration, IT, accounting and business units. Designate one owner for the equipment leasing program who is responsible for establishing uniform processes, policies and controls of leased equipment, and to act as executive sponsor. The team
should also include individuals who understand or can identify the full scope of agreements that an entity may be involved with, not just those agreements described as leases. 3. Know the new rules. The project team as well as the wider organization should understand the new standard, including implementation deadlines, challenges and risks, and how functions within the organization must adapt to address them. Training and informational sessions should be arranged as necessary. 4. Build a detailed implementation plan. The team should develop and have in place an initial and an updated plan of the steps to be undertaken for the transition. These should identify deliverables and processes, including back scheduling from implementation deadlines to establish timelines. 5. Inventory all equipment leases, real estate leases and other agreements in a centralized, electronic repository. In addition to operating and capital/finance leases, there are other forms of existing agreements and contracts that may be construed to be leases that should also be identified. These can include multiple-element arrangements that combine services, software, hardware and/or financing, and contracts such as power purchase agreements and supply contracts. All should be fully documented and compiled into similar categories for more efficient management and analysis. This will help decide whether the organization should elect either of the two available practical expedients that must be applied consistently to all leases. This determination will apply not only to reporting existing leases and other agreements during the transition phase, but also determine future accounting policy decisions. 6. Prepare a high level “if, then” type of analy-
sis. In the transition phase, it is key to determine the effects of whether or not to implement either or both of the two specific practical expedients. If elected, a practical expedient must be applied to all leases and agreements. The first practical expedient can be called the “prior conclu-
sions” practical expedient under which previous conclusions are respected while the new accounting is applied to those conclusions. So, if elected, an operating lease remains classified as an operating lease under ASC 842 but is nonetheless subject to being capitalized by the lessee. Further, a service contract such as certain energy agreements, remain classified as such and are not subject to ASC 842. The other practical expedient is the “hindsight application” practical expedient, which allows one to use hindsight of activity which occurred during the transaction period in the application of ASC 842. While simply electing both practical expedients may seem like a natural and relatively easy step to take, both lessors and lessees should examine their portfolios of leases and other agreements and determine the effect electing the practical expedients would have on the entity’s financial reporting. The if/then analysis can be conducted on a sample size of the various agreement categories identified in step 5. 7. Determine IT capabilities and requirements. Assess the organization’s existing IT structure and whether it can handle issues such as data extraction, information and document storage and the reporting requirements of the new standard. Lessees may be challenged in their ability to account for the capitalized lease liability as a loan for all of their existing leases and agreements. Leveraging IT tools and support will enable the organization to better manage the transition, as well as equip your organization for post-transition lease accounting. 8. Identify gaps in performance and capabilities. Assess existing lease accounting policies, procedures, and controls and perform a gap analysis to determine which require changes. Determine which options to follow to reach the desired future state of tracking and
financial reporting for agreements subject to ASC 842. For more information on the new lease accounting standard, visit www.equipmentfinanceadvantage.org/newLAR.cfm. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
SECTION
Attachments Pages 37-43
For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
Terex Stand Alone Core Barrel: No Need for Auger Drill
The Terex stand alone core barrel increases productivity when drilling hard rock, such as limestone material.
Terex Utilities announced a new auger tool for digger derricks — the Terex stand alone core barrel. It fits directly onto a standard Kelly bar and can be stowed like a standard auger on the boom, eliminating the need for any attachments or having to remove for transportation. When a flighted auger will no longer do the job, the new Terex stand alone core barrel can increase productivity when drilling hard rock, such as limestone material. For applications requiring drilling to begin at ground level, a removable pilot bit can be used to stabilize the stand alone core barrel in order to start a hole. Once initial penetration is achieved, the pilot bit can be removed. The optional pilot bit is important for achieving a straight starter track. In addition, the stand alone core barrel is designed for easy plug removal, increasing drilling productivity. A unique tooth pattern allows the rock plug to easily fall out of the barrel when the operator ratchets the rotation of the tool. Other core barrels require workers to physically hammer the core out of the barrel. “Terex is the only digger derrick manufacturer that also manufactures tooling. We understand how to design auger tools for
maximum productivity and efficiency for the entire application. The new stand alone core barrel is an example of applying a new concept to barrel tools for better job site performance,” said Dale Putman, auger tooling product support manager. The stand alone core barrel is available in various diameters ranging from 18 to 30 in. (45.7 to 76.2 cm) and features a barrel wall of 5/8 in. (1.5 cm). The heavy duty hex hub is either 2-1/2 or 25/8 in. (6.3 or 6.6 cm) and it comes with a Dom ST5 23/4 in. (7 cm) shaft. The overall length of the tool is 104 in. (264 cm). Access to the C-10 bullet teeth provides for easy removal and replacement. Terex Utilities completed field testing of the stand alone core barrel in June 2016 with Big Sandy RECC out of Eastern Kentucky. “We occasionally will have rock holes that our standard augers will not cut,” said Kirby Castle, line superintendent. “The Terex stand alone core barrel cut through the rock in a
The Terex stand alone core barrel can be stowed like a standard auger on the boom, eliminating the need for any attachments or having to remove for transportation.
matter of minutes. We like the fact that the auger will cut through the rock that we encounter and that it will save us some time on the jobsite.” For more information, visit www.terex.com/utilities. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
New Cat Tilt Buckets Handle Precision Grading Tasks
The tilt buckets are equipped with two horizontal cylinders — sized to provide forces matched to the machine — that allow the operator to position the bucket and maintain grade without moving the machine.
A new line of Cat tilt buckets is available for Cat crawler-excavator models 311 to 325 and for wheel excavator models M314 to M322. The new buckets, available in both pin-on and coupler configurations, hydraulically tilt 45 degrees from vertical, right and left, to provide added capability when working on angled surfaces or performing precise grading. The buckets install easily and are designed for such applications as ditch cleaning, landscaping and various construction tasks. In addition, the buckets can be used for conventional excavating in lowimpact soils, including top soil and clay. The tilt buckets are equipped with two horizontal cylinders — sized to provide forces matched to the machine — that allow
the operator to position the bucket and maintain grade without moving the machine. The horizontal-cylinder design allows a low-profile for the bucket, while protecting the cylinders from material flow. Grade-Control Ready The new buckets are drilled and tapped to accept the bolt-on sensor and clips required to make them “plug-and-play” compatible with Cat Grade Control 3D. Grade control provides visual and audio positioning guidance for the operator via the machine’s incab monitor, enhancing the speed, accuracy and material-movement efficiency of excavating and grading tasks.
Bucket Protection Tilt buckets feature a reversible, wearresistant, bolt-on cutting edge that protects the base edge and provides extended service life. In addition, bucket surfaces subject to heavy wear, such as corners, are protected with replaceable, weld-in inserts of premium-grade steel (400 BHN). Caterpillar supports its work tools with a comprehensive range of pre- and after-sales services, from advice about work-tool selection to operator training, equipment management, and financial and insurance products. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 38 • November 9, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
North American Attachments
800-380-8808 www.excavator-attachments.com
Excavator Attachments
USED PARTS FROM THOMPSON MACHINERY Compaction Wheels
Ditching Cleaning Bucket Drain Holes Optional
Dual Action Grapples
Hydraulic Thumbs
Used Caterpillar® parts from Thompson offer a great value for replacing or repairing industrial heavy machinery. And because the part is made by Caterpillar, you’ll know you’re getting a reliable product that won’t let you down when you need it most. • Used Parts and Attachments including Cat® cabs, OROPS, buckets, more • Used, Rebuilt, and Exchange Components including final drive parts, pumps, differentials, travel motors, more
• If we don’t have your part in stock, we can locate it with our nationwide Parts Locator Network. We also buy used and salvage equipment.
Ripper Tooth
Severe Duty & Rock Excavator Buckets
Tree Stumpers
Pin Grap Couplers
Skidsteer Attachments
Grapple Rakes
Grapple Buckets
Skeleton Buckets
Loader/Backhoe Attachments
Fork Carriages & FORKS
Loader Rake w/Grapples
All Sizes... Manual & Hydraulic Thumbs
Dozer Rakes
General Purpose Loader Buckets
Quality Construction Attachments
Call us at 615.259.5820 (Fax: 615.793.2428) E-mail us at usedparts@TMCat.com Check out our inventory online at www.TMCat.com/up
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • November 9, 2016 • Page 39
THIS MONTH’S SPECIALS 2082500022 - Two turntable bearings for a Komatsu PC400-3. Avon# 2055B3 ..............................................................................$7,175 Each 2072500022 - Two turntable bearings for a Komatsu PC300-3. Avon# 1555B3 ..............................................................................$4,475 Each 2052500021 - Two turntable bearings for a Komatsu PC200-3. Avon# 1148B4 ..............................................................................$3,450 Each 24100N418F1 - One turntable bearing for a Kobelco 909. Avon# 1551B9 ................................................................................................$2,075 21400N3354F2P1 - One turntable bearing for a Kobelco 907C or K907C. Avon# 1447B2 ......................................................................$4,850 KBB0282 / D28001 - One Link-Belt turntable bearing for a LS3400C. Avon# 1249B5..............................................................................$3,950 TH103075 - One John Deere turntable bearing for model 792. Avon# 1556B8 ........................................................................................$3,500 TH108810 or AT190766 - One John Deere turntable bearing model 490D and 495D. Avon# 1143B9 ....................................................$1,100
Mobro Marine Sells CRANE PARTS You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you. Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.
We sell high quality genuine OEM parts from the following manufacturers: • Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane
MOBRO MARINE, INC. Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Español
www.mobromarine.com/parts/php
Page 40 • November 9, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • November 9, 2016 • Page 41
1760 Reeves Street Dothan, AL 36303 334-699-5100 www.agfmachinery.com
Page 42 • November 9, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
Worksite Pro Attachments…
John Deere Grading-Heel Buckets Work in Tight Spaces
1985! e c n i S
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
Specially designed for the new small-frame G-Series skid steers (312GR, 314G, 316GR, 318G) and compact track loader (CTL) (317G), the grading-heel bucket attachments are ideal for customers performing final grading applications.
John Deere is expanding its lineup of easy-to-use Worksite Pro attachments with the new grading-heel buckets. Specially designed for the new small-frame G-Series skid steers (312GR, 314G, 316GR, 318G) and compact track loader (CTL) (317G), the grading-heel bucket attachments are ideal for customers performing final grading applications. The grading-heel buckets are similar in style and dimensions as standard dirt buckets, but feature a squared-off heel for backdragging applications. The bottoms of the buckets are smooth, with no lifts or edges, which allow the bucket to create a flat surface with ease. These features make the grading-heel bucket an ideal option for a variety of jobs, including land shaping, dirt leveling and installation of new landscape for sodding, irrigation and drainage. The grading-heel buckets are available in two sizes — 60- and 66-in. (152 and 167 cm) — for use with most compact models in the GSeries lineup. “We’re seeing construction spaces getting tighter, especially in the residential building
industry, and customers are seeing the value of operating smaller machines in these areas,” said Gregg Zupancic, product marketing manager, John Deere Construction & Forestry. “Add an attachment like the new grading-heel bucket, and contractors can work comfortably and efficiently in tight quarters without sacrificing productivity.” Worksite Pro buckets, like the gradingheel options, are ideal ways to take advantage of skid steers’ and CTLs’ steep dump angle and high bucket rollback, according to the manufacturer. With the universal, self-cleaning QuikTatch easy attachment system found on all John Deere skid steers, CTLs and compact excavators, the machine can easily add and remove the grading-heel bucket in no time. The new attachment series also is backed by John Deere parts, service and warranty coverage. For more information, visit www.johndeere.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • November 9, 2016 • Page 43
Page 44 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SECTION
Trucks & Trailers Pages 45-49
To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
Cummins Redefines Medium-Bore Engine Performance Cummins Inc. unveiled the next generation X12 Series engine, anticipating the productivity and performance needs of the North American Class 8 truck market. With the highest power-to-weight ratio of any engine in the 10-to-16-L class, the X12 enables regional-haul, intracity delivery and vocational trucks to operate at maximum payload with lower fuel consumption and more responsive driving than previously experienced from an engine of this size. The 12-L engine is rated up to 475 hp, and provides up to 1,700 lb.-ft. peak torque at
size and lower weight, but importantly, we achieved this with no compromise to structural strength, so that our next-generation 12liter comes with all the durability associated with a Cummins Heavy-Duty engine,” said Jim Fier, Cummins vice president — engineering, speaking at the X12 unveiling which took place at the Transportation Research Center (TRC) in Ohio. “We are really excited about how the next-generation X12 will complement our engine portfolio and provide to our OEM part-
“During the design process for the X12, we evaluated every opportunity to reduce size and lower weight, but importantly, we achieved this with no compromise to structural strength, so that our next-generation 12-liter comes with all the durability associated with a Cummins Heavy-Duty engine.” Jim Fier Cummins Inc.
1,000 rpm, which remains available to over 1,400 rpm, reducing the need for gear shifting and giving better low-speed lugging on grades. The architecture of the X12 results in a low engine weight — just 2,050 lbs. — enabled by a sculptured block design, which allows unnecessary mass to be removed, but retains high rigidity. Substantial weight savings also are achieved by the use of highstrength composite materials for the oil pan and valve cover. “During the design process for the X12, we evaluated every opportunity to reduce
ners a compact yet capable engine — an ideal fit for shorter-nose conventional cabs — while very low weight makes the engine a great power solution for sleeper trucks sensitive to front axle weight,” said Fier. A major installation and weight advantage also is realized with the new Single Module aftertreatment, designed by Cummins Emission Solutions to be 40 percent lighter and up to 60 percent smaller than current aftertreatment designs, according to the manufacturer. Customer-focused innovation resulted in a Single Cam In Head (SCIH) design with
roller valvetrain and high-efficiency intake ports to minimize complexity. The latest version of Cummins VGT Turbocharger incorporates reliability and durability enhancements, to boost transient response, and combines with an integrated low-weight engine brake, to provide strong engine braking at lower rpm. The next-generation X12 Series will be in full produc-
tion in 2018, following the completion of an extensive field-test program. The engines continue to benefit from ongoing fuel-efficiency improvements, and will be compliant with Phase 1 greenhouse gas (GHG) and fuelefficiency standards, to be fully implemented in 2017. The ISX12 G engine will continue as the heavy-duty platform for natural gas. Jamestown-Built The next-generation X12 will be built at the Cummins Jamestown Engine Plant alongside the latest X15 Efficiency Series and X15 Performance Series, as part of an
expanded X family occupying a 350 hp-to605 hp rating range. The X12 Series will offer a range of application-adapted ratings for regional-haul, vocational, refuse, motorcoach and fire trucks spanning the 350 hpto-475 hp range. For specific restricted applications, a higher 500-hp rating also will be available. Similar to the X15, the X12 will incorporate Cummins ADEPT, SmartCoast and predictive cruise control (PCC) functions for further fuel savings. Useful options for vocational and emergency truck applications include front power take-off (FEPTO), rear power take-off drive (REPTO) and a side-mounted drive. Over-the-Air Connections The X12 will be ready from the factory to take advantage of advanced solutions using Cummins Connected Calibrations family of applications, which will empower fleets to improve productivity when connected to a capable telematics system without a visit to the service bay. And with solutions using Cummins Connected Tuning applications, the X12 Series can be adjusted and optimized over the air, for improved costs of operation — without a trip to the service bay. A significant contribution to improving truck uptime is realized with Connected Diagnostics enabled through the engine's electronic control module (ECM) and the telematics system. Connected Diagnostics automatically processes fault code data, sending instant notifications from Cummins detailing probable cause, and providing recommended actions. The expert advice delivered by email, app or web portal enables the fleet manager to make informed decisions about continuing truck operations and when to schedule a service visit for the most convenient time, maximizing uptime. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 46 • November 9, 2016 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Fuel Efficiency, Power...
Mack Highlights 2017 Powertrain at Conference, Exhibition Emphasizing fuel efficiency, power and its pioneering tradition of integration, Mack Trucks highlighted its 2017 Mack powertrain, including its MackMP series engines, Mack mDRIVE HD 13and 14-speed automated manual transmissions, ClearTech One single package Exhaust Aftertreatment System (EATS) and Mack Predictive Cruise. Mack made the announcement at the American Trucking Associations Management Conference & Exhibition in Las Vegas. “Our customers want to reduce fuel consumption without sacrificing power and receive a better return on their investment,” said Jonathan Randall, Mack Trucks senior vice president of sales. “This newest evolution of the Mack powertrain meets those needs, while also reducing greenhouse gas emissions.” Several upgrades and enhancements to Mack’s 11-L MP7 and 13-L MP8 boosted fuel efficiency from 2.1 to 8.8 percent compared with prior model year engines. Both engines feature an updated wave piston design that raises the compression ratio and enables more complete combustion of fuel. The new common-rail fuel system also more precisely injects fuel. Combined with a two-speed coolant pump, these features help increase MP7 fuel efficiency by up to 5.1 percent and MP8 fuel efficiency by up to 5 percent. A new two-piece valve cover, shimless rockers and a low-pressure fuel system with an enhanced, integrated aftertreatment dosing module to reduce maintenance needs also were added to both engines. An updated, doublewalled EGR flow sensor helps reduce condensation and soot buildup in cold weather, while a new intake throttle enables a faster warmup when the engine is started. The 2017 MP7 also delivers more power with a new 425 hp rating.
“The Mack mDRIVE has been a game-changer for the trucking industry since its introduction in 2010, and the mDRIVE HD has been as well since we introduced it in 2015. The mDRIVE HD with 13- and 14-speed creeper gears is the next evolution, offering our customers an automated manual transmission with greater range and performance.” Roy Horton Mack Trucks
“The 425 horsepower rating enables Mack to give customers 13-liter power in an 11-liter engine,” said Roy Horton, Mack director of product strategy. “The power that customers associate with a Mack engine is now improved and in a lighter weight design.” Mack also will offer the 2017 MP8 engine with a turbo compounding system — available exclusively with Mack’s SuperEconodyne downspeeding
The updated 2017 Mack MP series engines complement Mack’s recently launched Mack mDRIVE HD 13- and 14-speed automated manual transmissions. With up to two low-ratio creeper gears, the new mDRIVE HD variants provide improved startability for heavy loads, while maintaining proper gearing for fuel efficiency at
package —engineered to give customers in highway applications increased power and efficiency. Turbo compounding converts wasted energy from the exhaust into mechanical energy that is fed back to the engine. The system adds up to 50 additional horsepower, increasing fuel efficiency by up to 8.8 percent. The additional power generated by the turbo compounding system allows the engine to maintain full torque as low as 900 rpm. This enables a broader operating range in top gear and also allows a truck to hold top gear longer when overtaking a hill, even with falling engine rpm.
speed, according to the manufacturer. Available in direct or overdrive configurations, the new Mack mDRIVE HD 13-speed offers a low reduction gear ratio designed for easier startability on steep grades or when the truck is hauling a heavy load. The Mack mDRIVE HD 14-speed, available only in an overdrive configuration, adds a second ultra-low-speed reduction gear designed for curb pouring applications or low-speed, heavyhaul maneuvering. Both transmissions offer up to four reverse gear ratios. “The Mack mDRIVE has been a game-changer for the trucking
industry since its introduction in 2010, and the mDRIVE HD has been as well since we introduced it in 2015,” Horton said. “The mDRIVE HD with 13- and 14speed creeper gears is the next evolution, offering our customers an automated manual transmission with greater range and performance.” The new Mack mDRIVE HD models share their architecture with the standard mDRIVE HD, including reinforced internal components and the same gear ratios for the 12 forward speeds. The addition of the low reduction and multispeed reverse gears is made possible by a short extension added to the front of the transmission case. Despite the additional capabilities, the new mDRIVE HD models are less than 5 in. (12.7 cm) longer and only 90 lbs. (41 kg) heavier than the standard mDRIVE HD, maintaining a weight advantage of nearly 150 lbs. (68 kg) compared with automatic transmissions. The mDRIVE HD 13-speed is now standard on the Mack Granite. The mDRIVE HD 13- and 14speeds are available in Mack Pinnacle, Granite and Titan by Mack models. Available exclusively with Mack’s MP series engines, the Mack mDRIVE HD 13- and 14-speed automated manual transmissions are available for order on
Mack Pinnacle, Granite and Titan by Mack models. Also new for 2017 is ClearTech One, which is more compact than a two-component system, allowing for a shorter wheelbase for improved maneuverability. The smaller package also is about 17 lbs. (7.7 kg) lighter than the current two-unit EATS. ClearTech One is optimized for passive regeneration and SCR performance. The SCR catalyst is mounted downstream of the DPF, preventing hydrocarbon, ash or soot from entering the system. There also is no need for a second Diesel Oxidation Catalyst to be located before the SCR system. The single package unit enables more framerail space, allowing customer flexibility and the ability to have more room for chassismounted equipment. ClearTech One is available for order in Mack Pinnacleand Mack Granite models. Mack also will continue to offer the two-unit ClearTech EATS for specific applications such as tandem steering. Yet another fuel savings offering in Mack’s suite of powertrain solutions is Mack Predictive Cruise, an intelligent system that memorizes a route when cruise control is on, storing up to 4,500 hills in its memory. When the driver next travels the same route, Mack Predictive Cruise engages mDRIVE to choose the most fuel-efficient gear. Predictive Cruise constantly monitors speed, engine load, weight and the road gradient in order to select the best gear for the road ahead. Mack Predictive Cruise can increase fuel efficiency by up to 1 percent and does not require a constant GPS connection. Mack Predictive Cruise will be available for order in January 2017. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • November 9, 2016 • Page 47
TIGER EQUIPMENT www.tigerequipment.com 4181 New Bern Hwy Jacksonville, NC 28546 910-346-1932
805 Old Roberts Rd Benson, NC 27504 919-989-0066
RING POWER CORP. 500 World Commerce Parkway St. Augustine, FL 32092 904-494-7631 www.ringpower.com Brooksville 352-797-9500
Orlando 407-856-4851
Daytona Beach 386-947-4939
Palm Bay 321-725-6420
Jacksonville 904-714-3517
Sarasota 941-359-6050
Lake City 386-755-3997
Tallahassee 850-514-1958
Lakeland 863-606-0512
Tampa 813-671-3200
Ocala 352-620-0660
800-347-6225
TEXTING AND DRIVING MAKES GOOD PEOPLE LOOK BAD.
Nextran Truck Center
Fax: 904-354-3807
SPECIAL TRUCK SALE
2015 Low Boy Tractor, 505HP, 13 Speed, Rawhide Package, 14.6 FA, 46 Rears, Room for a Lift Axle
2016 Mack GU532, Cummins ISL Engine 345HP, Allison Auto Trans., 10 Yard Dump Body, 16500 Lb Front Axle, 23000 Lb Rear Axle
STOPTEXTSSTOPWRECKS.ORG
2006 Mitsubishi Fuso, 128,000 Miles, 14’ Flat Bed Isuzu NPR-HD with Tool Body, Gas
Page 48 • November 9, 2016 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Bringing Awareness…
Cloud-Based Service…
Felling’s 4th Annual ‘Trailer for a Cause’ Mack ASIST Mobile Auction Benefits Brain Tumor Association App to Increase Uptime, Efficiency
Mack Trucks announced a new Mack ASIST mobile app that allows customers to manage service and unplanned events from wherever they may be located. Mack ASIST is a cloud-based service relationship management tool that keeps fleet customers, dealers and service providers, Mack field staff and Mack Uptime Center agents connected during service and repair events. “Mack ASIST enables us to give customers key informa-
Felling Trailers is conducting its fourth online auction of a FT-3 drop deck utility trailer to benefit a non-profit organization.
Every day, 500 people are diagnosed with a brain tumor. They join more than 700,000 who are currently living with the fear, frustration and uncertainty a brain tumor diagnosis brings. Felling Trailers is conis now the only national ducting its fourth online aucorganization committed to tion of a FT-3 drop deck utilfunding brain tumor ity trailer to benefit a nonresearch and providing supprofit organization. Felling port and education programs Trailers wants to bring for all brain tumor types and awareness of and support to all age groups. those individuals affected by Every day, 500 people are brain tumors. Thus, Felling diagnosed with a brain Trailers manufactured and tumor. They join more than painted one of its most popu700,000 who are currently lar trailers a color it called living with the fear, frustrabrain tumors grey, to be auction and uncertainty a brain tioned online for 7 days durtumor diagnosis brings. ing the month of November. There are more than 120 difmission of the ABTA is to advance the understand- ferent types of brain tumors, Tredit Tire donated the The ing and treatment of brain tumors with the goals of wheels and PPG improving, extending and, ultimately saving the lives which means there is no one Commercial Coatings donat- of those impacted by a brain tumor diagnosis. answer to the brain tumor ed the custom metallic grey challenge. paint for this trailer and The American Brain cause. One hundred percent of the winning bid will benefit Tumor Association has a commitment to increasing research the American Brain Tumor Association. funding; increasing the quality of information available to The online auction via Ebay (listing # 654978244102) patients and their caregivers; increasing the number of newly will be “live” from Nov. 4 at 12:00 p.m. CST until Nov. 11 diagnosed who get information they need in a timely way so at 12:00 p.m. CST. Arrangements to be made for pick up at they can make informed treatment decisions; and serving as Felling Trailers’ manufacturing facility or delivery (freight the voice of the brain tumor community. extra). For access to more information and resources visit ABTA The mission of the ABTA is to advance the understanding online at www.abta.org. and treatment of brain tumors with the goals of improving, For more information about Felling Trailers, call 800/245extending and, ultimately saving the lives of those impacted 2809 or visit www.felling.com. by a brain tumor diagnosis. (This story also can be found on Construction Equipment The American Brain Tumor Association was the first and Guide’s website at www.constructionequipmentguide.com.)
“Mack ASIST enables us to give customers key information to help increase uptime services.”
David Pardue Mack Trucks
tion to help increase uptime and expedite the repair process,” said David Pardue, Mack vice president of connected vehicle and uptime services. “The new Mack ASIST app enhances our customers’ ability to manage these events from a mobile device.” The ASIST app will be free and will feature a quick link to the Mack Uptime Center for quick repairs. The Uptime Center, based in Greensboro, N.C., houses personnel from all customer support functions and connects them to customers and dealers through the latest vehicle communications technology and case management tools. Mack ASIST is a key part of the closed loop communication process around fault codes identified by Mack GuardDog Connect. Through its partnership with Decisiv, Mack is currently piloting the app with select customers for Android and iOS operating systems. Mack’s approach to uptime begins with Mack GuardDog Connect, a proactive diagnostic and repair planning system. GuardDog Connect monitors fault codes that could potentially shut down a truck or lead to an unplanned visit to the dealer. The system enables quick diagnosis of issues, proactive scheduling for repairs and confirms parts availability, all while the truck is still on the job. Mack ASIST enables communication through the entire process, allowing all parties to remain informed about the status of their vehicle before, during and after a service event. It also allows for a consistent customer service experience across the Mack dealer network including real-time updates to fleet customers. Mack GuardDog Connect and Mack OneCall along with ASIST by Decisiv provide the foundation for both current and future opportunities to help fleet customers maximize their uptime and reduce their total cost of ownership. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • November 9, 2016 • Page 49
Atlantic Coastal Equipment Sales & Rentals 922 Longwood Drive Richmond Hill, GA 31324 912-459-1155 www.acesalesandrentals.com
Felling Lowers the Angle With 8-Foot Air Ramps Felling Trailers Inc. has recently expanded its air ramp length options for deck-over tags and semi trailer lines, now offering an 8 ft. (2.4 m) air ramp(s). For close to a decade Felling Trailers has offered air ramps with available lengths of 6 and 7 ft. (1.8 and 2.1 m). The 8-ft. air ramps were designed to accommodate for the load angle necessary when loading cumbersome Felling Trailers Inc. has recently expanded its air low clearance equipment ramp length options for deck-over tags and semi trailsuch as paving equipment er lines, now offering an 8-ft. (2.4 m) air ramp(s). and directional drills. With • 2 cushion cylinders the 8-ft. air ramp(s) length it provides the • Requires 120 lb. psi user a gentler, more gradual incline to pro• Ramps available with: wood inlaid and vide ease in loading/unloading. The 8-ft. air self cleaning 5 by 3 in. (12.7 by 7.6 cm) ramp option offers a load angle of 13 degrees angle iron and 11 degrees with the option of air ride For more information, call 1.800/245suspension when air is dropped. 2809 or visit www.felling.com. • Offered on deck-over low profile tags (This story also can be found on and semi trailers Construction Equipment Guide’s website at • 2 Firestone air bags www.constructionequipmentguide.com.)
Richmond Machinery 1701 Roseneath Road Richmond, VA 23230 804-359-4048 www.richmondmachinery.com
Page 50 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 51
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248
Link-BeltŽ Spin AceŽ Excavators are packed with all the power, productivity, DQG IXHO HI¿FLHQF\ \RXœYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV ‡ 5RRP\ UHGHVLJQHG FDE
QUEST CONSTRUCTION EQUIPMENT, LLC www.questequip.com 10561 Airline Hwy. St. Rose, LA 70087 504-467-7663 Fax: 504-467-3722
HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458 364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955
Gonzales, LA 225-450-6425
‡ +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU ‡ &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV ‡ Extended service intervals
BENNETT EQUIPMENT & SUPPLY
‡ )RXU PRGHOV Ć? ĆŽ WR Ć? ĆŽ WDLO VZLQJV
CROSBY EQUIPMENT COMPANY, INC.
‡ 7LHU $ FHUWL¿HG ,VX]X HQJLQHV
www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664
‡ \HDU VXEVFULSWLRQ WR 5HPRWH&$5(ÂŒ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW
631 Electric Avenue Swainsboro, GA 30401 478-237-8372
MID SOUTH MACHINERY, INC. 3233 Highway 80 West Jackson, MS 39204 601-948-6740
Model #
Operating Weight
Net hp @ rpm
Tail Swing
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
ML CRANES & EQUIPMENT www.mlcranes.com 3908 N. Graham St. Charlotte, NC 28206 877-649-7739
3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553
GS EQUIPMENT INC. 14336 Seaway Road Gulfport, MS 39503 228-867-1555
MAY HEAVY EQUIPMENT www.mayequip.com 5423 US-70 Bus. Clayton (Raleigh), NC 27520 866-629-3784
*75 X3 and 80 X3 engines are Final Tier 4
www.bennettequipment.net 1403 Piedmont Hwy. Piedmont, SC 29673 864-277-7272
www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.net Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
Page 50 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 51
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248
Link-BeltŽ Spin AceŽ Excavators are packed with all the power, productivity, DQG IXHO HI¿FLHQF\ \RXœYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV ‡ 5RRP\ UHGHVLJQHG FDE
QUEST CONSTRUCTION EQUIPMENT, LLC www.questequip.com 10561 Airline Hwy. St. Rose, LA 70087 504-467-7663 Fax: 504-467-3722
HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458 364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955
Gonzales, LA 225-450-6425
‡ +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU ‡ &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV ‡ Extended service intervals
BENNETT EQUIPMENT & SUPPLY
‡ )RXU PRGHOV Ć? ĆŽ WR Ć? ĆŽ WDLO VZLQJV
CROSBY EQUIPMENT COMPANY, INC.
‡ 7LHU $ FHUWL¿HG ,VX]X HQJLQHV
www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664
‡ \HDU VXEVFULSWLRQ WR 5HPRWH&$5(ÂŒ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW
631 Electric Avenue Swainsboro, GA 30401 478-237-8372
MID SOUTH MACHINERY, INC. 3233 Highway 80 West Jackson, MS 39204 601-948-6740
Model #
Operating Weight
Net hp @ rpm
Tail Swing
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
ML CRANES & EQUIPMENT www.mlcranes.com 3908 N. Graham St. Charlotte, NC 28206 877-649-7739
3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553
GS EQUIPMENT INC. 14336 Seaway Road Gulfport, MS 39503 228-867-1555
MAY HEAVY EQUIPMENT www.mayequip.com 5423 US-70 Bus. Clayton (Raleigh), NC 27520 866-629-3784
*75 X3 and 80 X3 engines are Final Tier 4
www.bennettequipment.net 1403 Piedmont Hwy. Piedmont, SC 29673 864-277-7272
www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.net Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
Page 52 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Pages 53-63
Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Live Demos Highlight MB Crusher’s Presence at MINExpo As a newcomer to MINExpo, the American subsidiary of MB Crusher in Italy gave live performances of its crushing attachment and displayed a drum cutter and screening attachment designed for loaders at its booth. This was the first time the subsidiary displayed its drum cutter and loader screening attachment product lines at an exhibition. MB Crusher America Inc. had live crushing demonstrations of the BF135.8 crusher attachment on a Hyundai excavator. It crushed granite to a 4-in. (10 cm) minus for MINExpo attendees. The BF135.8 crusher attachment is designed for excavators weighing over 94,000
lbs. (42,638 kg). It has an adjustable output setting from a 1.5-in. (4 cm) minus to a 6-in. (15 cm) minus. The productivity rate can get up to 115 cu. yds. (88 cu m) per hour, about 170 tons (154 t) per hour, at a 6-in. minus output adjustment. “We had people tell us during the demo that they have not seen a machine like our BF135.8 crushing attachment. It’s a machine we believe will help miners with their jobs,” said Miriano “Max” Ravazzolo, C.E.O. of MB Crusher America. “Our BF90.3 crusher bucket is being used by Kinross at Round Mountain Gold for its gravity plant. And our BF150.10 crush-
The MB-R800 drum cutter has a direct drive twin-motor system and runs on the hydraulic system of the excavator. It is designed to cut, grind, mill, or till surfaces and hard materials. The MB-LS170 screening attachment is designed for wheel loaders and backhoe loaders weighing between 14,000 and 24,000 lbs. (6,350 and 10,886 kg).
MB Crusher America Inc. had live crushing demonstrations of the BF135.8 crusher attachment on a Hyundai excavator.
er bucket is being used by a major mining company.” On the other side of its booth, the company displayed its MBR800 drum cutter and MB-LS170 screening attachment. Both are new products created within the year. The MB-R800 drum cutter has a direct drive twin-motor system and runs on the hydraulic system of the excavator. It is designed to cut, grind, mill, or till surfaces and hard materials. The drum cutter is used in these areas of application: demolition, refurbishment, trenching, quarries, excavating, special foundations and road building. The MB-LS170 screening attachment is designed for wheel loaders and backhoe loaders weighing between 14,000 and
24,000 lbs. (6,350 and 10,886 kg). It has a load capacity of 1.6 cu. yds. (1.2 cu m) and a basket depth of 35 in. (89 cm). It is created with a cone-shaped basket to increase production and allow contractors to quickly sift through material without residue. The MB-LS170 can screen mixed materials; sift wet and dry materials; and clean superficial powder from natural stones. In the past year, the company has expanded its product line to include several models and sizes of grapples, drum cutters and a new line of screening attachments designed for skid loaders, backhoes and loaders. In addition to its expansion, MB offers magnetic separators and dust suppression
kits for its crushing and screening attachments, which just last year was not an option for screening attachments. MB’s attachments are ideal for quarries and mines, mineral processing, on-site processing, gold mine projects and gravity plants. Besides the mining industry, MB products have a wide scope of work that includes demolition, excavation, road work, pipeline work and environmental reclamation projects. For information, call 855/MBCRUSH or visit www.mbamerica.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 54 • November 9, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
CRUSHING
MATERIAL MA ATERIAL HANDLING HAN
SCREENING
TRACKS
www.highway-equipment.com g y q p
www.stoneequipmentco.com q p
WASHING W ASHING & CLASSIFYING CL www.kellytractor.com y
Orlando, FL L 32824-8728 32824 8728 407 850 9614
Jacksonville, FL L 32207 904 737 6000
Lake City, FL 32024 386 758 7444
ZZZ ÀDJOHUFH FRP J
The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Pioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.
www.kpijci.com
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • November 9, 2016 • Page 55
Page 56 • November 9, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Cat F Series Machines Feature Design Enhancements The recently released Cat F Series wheeled excavators (M314F, M316F, M318F, M320F and M322F) and wheel material handlers (MH3022 and MH3024) are designed to meet high standards for initial quality, reliability, low operating costs, operator comfort and safety, simplicity of operation and maintenance, and environmental friendliness. To further enhance overall value for the machine owner, Caterpillar has further refined these product lines’ design for the 2017 model year to provide increased fuel efficiency, versatility, and operator safety and convenience. Caterpillar’s policy to annually update product design allows the company to bring new features and enhancements to the market more quickly. Decreased Fuel Consumption The wheeled excavators use the Cat C4.4 ACERT (M314F and M316F) and C7.1 ACERT (other models) engines. These engines feature high torque and fast response to load changes, while meeting current emission standards. Emissions technology includes the Cat NOx-reduction system, selective catalytic reduction system, diesel oxidation catalyst, and high-pressure/commonrail fuel. The Cat clean emission module also includes a diesel particulate filter for all models, excluding the M314F and M316F, which do not require it to meet the emission standards. New for these machines is a system that adjusts engine speed to match speed demands during travels. The system provides the exact level of power required for varying roading situations, resulting in reduced fuel consumption and reduced sound levels, according to the manufacturer. Increased Versatility An integrated optional Tiltrotator-ready package is now available for all models, but the material handlers, and provides a factory-installed, on-board platform for a Rototilt tiltrotator. All modifications required to the cab, electrical and software systems are incorporated in the package. The system requires no additional monitor; all necessary settings and
The recently released Cat F Series wheeled excavators (M314F, M316F, M318F, M320F and M322F) and wheel material handlers (MH3022 and MH3024) are designed to meet high standards for initial quality, reliability, low operating costs, operator comfort and safety, simplicity of operation and maintenance, and environmental friendliness. To further enhance overall value for the machine owner, Caterpillar has further refined these product lines’ design for the 2017 model year.
parameters are integrated directly into the machine monitor. Included with this package are the new advanced joysticks. The available advanced joystick control system is designed to provide added comfort and functionality. The ergonomic design of the controls and rubberized surfaces allow fingertip control of hydraulic functions, while two sliders and five buttons on each joystick allow integrating additional functions, such as rotation/tilt and lever steering. An added standard feature is extended flexibility for work-toolfunction assignment, on the left foot pedal and joysticks. The system allows more freedom to choose which work tool function will be assigned to which control. The new trailer-ready package (optional on M314F, M316F, M318F and M320F, and not available in Australia and New Zealand) lets you be more autonomous than ever while increasing your mobility and flexibility. The new trailer-ready pack-
age provides another factoryinstalled solution including all the necessary electrical and hydraulic systems, so that you now just need to hitch your trailer and go. Move your attachments, tools, and fuel along with you to each job site or move material directly on site. The hydraulics on the machine allows you to operate the tailgate and dumping devices of your trailer. Also standard is the new permanent auxiliary-flow feature that simplifies control of work tools requiring constant rotation, such as mowers and mulchers. Operators can now press the control button once to engage constant flow. The function can be disabled if the operator chooses. New quick-coupler controls now are operated from a switch, not from the monitor, in order to comply with the new ISO 13031 standard. The quick-coupler control switch is located in place of the previous radio-mute switch, which is relocated to the right console (below the armrest). The new system allows quicker tool changes.
Safety Enhancements The ability to limit travel speed in reverse mode also is a new feature, allowing the machine owner to set a safe speed when the machine is swinging and moving in reverse. In addition, a modified swing lock now functions independently from the implementlockout system. When loading the machine onto a transport truck, for instance, this feature allows for greater maneuverability, offering the ability to adjust implement position, while eliminating the risk of accidentally swinging the upper frame. A cab pre-filtration system (optional on MH3022 and MH3024) is available ex-factory to prevent the need from adding additional system to material handlers to almost completely eliminate dust entry and air contamination. It is composed of HEPA 13 compliant filters to reduce dust entry and particles entry from the outside along with a HEPA 13 re-circulation filter that improves the air quality inside the cab.
Accommodating Operator's Environment A new split-screen monitor for the side-view and rear-view camera displays allows both images to be seen at a glance by the operator. These views are displayed on the second monitor, which provides a wider screen for enhanced visibility. Also, an added LED light for the side-view camera allows improved visibility from the front right-hand side to the rear of the machine. The new light for this camera, coupled with the current light for the rear camera, ensures optimum visibility for operators. Also available are electrically adjustable mirrors that allow the operator to position mirrors while seated in an operating position. This capability eliminates the need for operators to climb on machines with a variableadjustable boom — a plus for safety. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • November 9, 2016 • Page 57
LET’S BE CLEAR SCREEN MACHINE PRODUCTS ARE BETTER ... BY DESIGN!
TRAMP IRON RELIEF SYSTEM
Even the most powerful jaw crusher can be stopped by a blockage of material at the base of the jaws. That means downtime, and that means lost productivity.
Issue: Non-crushable item gets lodged at the nip angle of the jaw crusher.
Screen Machine’s JXT Jaw 0% Financing Crusher features our exclusive 48 8 Months Blockage Clearance and Tramp for 4 Iron Relief System. It lets the available! now availab le! on all new factory orders closed side setting expand to clear blockages and maintain production.
Solution: The Tramp Iron Relief System automatically widens the closed side setting, letting the item through.
Visit our web site for full details on how it works, and how it helps you work better ... www.screenmachine.com/jxt-jaw-crusher.php
American-Made Innovation Since 1966 800-83 800-837-3344 7-3344 344
7740-927-3464 40-927-3464
email@screenmachine.com
See how it works at www.screenmachine.com
Page 58 • November 9, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
CLEAR THE W WA AY
FROM OUR SIGNA SIGNATURE ATURE TURE BULL HO HOG, OG, TO TRACKED CAR CARRIERS, RRIERS, TO FORESTR FORESTRY RY A ATT ATTACHMENTS, TTTACHMENTS, W WE HA HAVE AVE VE A RUGGED, DURABLE PRODUCT FOR EVER EVERY Y APPLICA APPLICATION. PPLICA ATION. TION. BUIL BUILT LTT BRUT B BRUTALLY TALL ALLLY TOUGH AND OPERA OPERATOR-FRIENDLY, ATOR-FRIEND TOR-FRIENDL DLLY, SO YOU CAN CLEAR CLEAR THE W WA WAY AY TO A JOB J WELL DONE.
800.528.3113
fecon.com
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • November 9, 2016 • Page 59
GROUND UP
PURPOSE-BUILT FROM THE
What if your purpose for a purpose-built scrap handler isn’t quite the same as the other guy’s purpose? Only SENNEBOGEN scrap handlers are purpose-built one machine at a time to meet your goals.
Maximum Throughput • Built-in Safety
• Diesel and electric-drive machines from 44,000 to 750,000 lbs. • Full range of rubber tired, tracked and stationary models with customized boom & stick configurations.
Think of the possibilities! See how SENNEBOGEN can purpose-build the right machine for you at www.sennebogen-na.com/scrap
www.sennebogen-na.com | +1-704-347-4910
TRACTOR & EQUIPMENT CO. Alabaster, AL 205-621-2489 Anniston, AL 256-831-2440 Birmingham, AL 205-591-2131 Decatur, AL 256-355-0305 Dothan, AL 334-678-1832 Mobile, AL 251-457-8991 Montgomery, AL 334-288-6580
Shoals Area, AL 256-383-5666 Tuscaloosa, AL 205-752-0621 Panama City, FL 850-763-4654 Pensacola, FL 850-505-0550 Albany, GA 229-435-0982 Atlanta, GA 404-366-0693 Augusta, GA 706-798-7777 www.tractor-equipment.com
Calhoun, GA 706-879-6200 Columbus, GA 706-562-1801 Hoschton, GA 706-654-9850 Kennesaw, GA 678-354-5533 Macon, GA 478-745-6891 Savannah, GA 912-330-7500
POWER EQUIPMENT COMPANY Knoxville, TN 865/577-5563 LaVergne, TN 615/213-0900 Chattanooga, TN 423/894-1870 Kingsport, TN 423-349-6111 Memphis, TN 901-346-9800 Saltillo, MS 662-869-0283 www.powerequipco.com
ATLANTIC EQUIPMENT & SUPPLY Hampton, VA 23661 757/827-4778 800/325-0461 www.aeandsupply.com
ASC CONSTRUCTION EQUIPMENT USA, INC. Asheville, NC 828-687-0620 Charlotte, NC 704-596-8283 Greenville, NC 252-754-5280 Raleigh, NC 919-661-8710 Charleston, SC 843-414-1120 Columbia, SC 803-791-0740 Piedmont, SC 864-704-1060 www.ascvolvo.com
GS EQUIPMENT INC.
LYLE MACHINERY
Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Fort Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
Jackson, MS 800-898-4000 Fax: 601-939-8440 Gulfport, MS 228-832-7575 Hattiesburg, MS 601-296-7556 Magnolia, MS 601-783-2111 www.lylemachinery.com
GREAT SOUTHERN CONSTRUCTION EQUIPMENT Jacksonville, FL 904-268-4400 Orlando, FL 407-859-9160 www.gsequipment.net
Page 60 • November 9, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Strong Relationships…
Morbark Cuts Better Path to Aftermarket Pricing With Syncron Syncron, an aftermarket service provider that exclusively focuses on service parts management and pricing for the world’s leading manufacturers, announced Morbark, a manufacturer of heavy-duty, high-performance equipment for the forestry, recycling, tree care, sawmill and biomass markets, has selected Syncron’s price management solution to optimize its aftermarket revenue and provide a better experience to both its dealers and customers. The new solution will not only allow Morbark to enhance these relationships, but also improve margins within its Parts Business Unit, according to the company. Morbark is focused on creating strong relationships with its dealer network and ensuring the ultimate benefit to customers is always top of mind. To help bolster this, Morbark sought a cloud-based solution to optimize its parts pricing, streamlining communication between the OEM and dealers and providing much better visibility into the pricing process. “With a sophisticated dealer network, we have the objective of maximizing business while also providing logical and attractive pricing plans for both our dealers and customers,” said Erika Snyder, director of part sales and manufacturing at Morbark. “Moving from manual processes to an automated aftermarket pricing solution creates a more seamless, collaborative relationship with dealers, in turn creating better experiences for our end-customers. We’re thrilled to work alongside Syncron’s experts to achieve these goals.” Prior to implementing Syncron’s service parts pricing solution, Morbark’s pricing logic was a time-consuming and manual process. Moving to a cloud-based solution provides much better visibility, and allows the company to be more nimble in its approach to pricing. “Today’s most innovative companies realize pricing is a key profit lever, and that parts pricing in particular helps these leading organizations move the needle,” said Johan Stakeberg, head of global sales and president, U.S. at Syncron. “We are thrilled to have Morbark among our impressive customer base, and are eager to work with them to not only optimize their aftermarket pricing, but also improve dealer and customer experiences while simultaneously improving margins and revenue.” As Morbark continues to become more sophisticated in its approach to aftermarket pricing, the company will work with Syncron to achieve short-term successes, including adhering to cost/benefit best practices. Additionally, the company continues to develop plans and scenarios to become more competitive and provide dealers with optimized pricing structures, while simultaneously generating revenue and enhancing the customer experience. For more information about Morbark, visit www.morbark.com/. For more information about Syncron, visit syncron.com.
Morbark Hosts 10th Demo Days Event Morbark LLC welcomed about 250 customers, members of its authorized dealer network, and other guests from around the world for its 10th Demo Days event on Oct. 13 to 14. Morbark’s Demo Days give attendees the opportunity to not only watch the equipment in action, but also meet the people who build and support the equipment as they see firsthand the manufacturing processes utilized. Events included factory tours, networking opportunities, vendor booths, and a chance to see the equipment up close, as well as try out Morbark’s Boxer line of compact utility loaders. The event culminated with demonstrations of equipment for the forestry, biomass, recycling and tree care markets: • HT1042 slow-speed shredder • 3200 electric wood hog horizontal grinder • 3200 track wood hog horizontal grinder • 223 flail • 23 chiparvestor • 30/36 NCL whole tree drum chip-
Morbark LLC welcomed about 250 customers, members of its authorized dealer network, and other guests from around the world for its 10th Demo Days event on Oct. 13 to 14.
per • 40/36 NCL whole tree microchipper • Beever M12R chipper • Beever M18R chipper • Beever M20R chipper with loader • 6600 track wood hog horizontal
grinder • 1300B tub grinder For more information, www.morbark.com.
visit
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CEMCO Enables Efficient Recycling
CEMCO Inc. provides efficient recycling equipment that all frequency of waste removal. This volumetric reduction quickly transforms waste glass into a 100 percent recycla- also decreases disposal and haulage costs by several hunble, cullet or soft-edged sand byproduct. The glass process- dred dollars per month for most operations. ing plant processes about 3,500 to 4,000 lbs. per hour and is The byproducts produced by the glass processing plant ideal for recycling glass for business districts, large casinos can be sold to recycling centers as well as used in landfills or conference centers and municand aggregate operations. The ipalities, according to the compapermeability of glass sand is ny. ideal for aggregate contractors The glass processing plant since it can improve the quality transforms glass into rounded, of gravel in an aggregate mix 3/8-in. sand that is safe to the due to its long-term strength touch. The machine’s hopper and and thermal insulation as well conveyor provide efficiency and as aesthetic appeal. Certain ease of use to the operator. The states require as much as 10 crusher is powered by a 10-hp, percent reclaimed glass to be NEMA Class C TEFC electric blended with other aggregates motor and features strategically in Class 5, 6 or 7 road base located trapdoors to prevent fly- CEMCO’S glass processing plant processes materials. Glass sand also can ing glass debris from exiting the about 3,500 to 4,000 lbs. per hour and is ideal be used for erosion and irrigamachine, which further enhances for recycling glass for business districts, large tion control, as landfill covers casinos and municipalities. operator safety. and for paint mix. The processing plant incorporates intelligent controls, The plant is designed for fast, simple maintenance. All resulting in improved operator safety and efficiency. Its pro- key components, such as the rotor parts and the sizing grammable controls and enhanced safe lockouts prevent screen, are easily accessible. The unit can be quickly misuse and minimize the risk of injury. Plus, the machine cleaned using a simple detergent mix. works quietly, at less than 70 decibels. Once the unit begins CEMCO’s glass processing plant is manufactured in its processing, the yellow operating light turns on to alert oper- Belen, N.M., facility and is readily available — arriving to ators that the machine is in use. the customer within 6 to 8 weeks after purchase. The glass processing plant significantly cuts waste hanFor more information, call 505/864-1200 or visit dling costs. Offering an eight-to-one size reduction, the eco- www.cemcoturbo.com. (This story also can be found on Construction Equipment nomic design crushes eight glass containers down to the (This story also can be found on Construction Equipment equivalent size of just one container — reducing the over- Guide’s website at www.constructionequipmentguide.com.)
Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • November 9, 2016 • Page 61
You Des Deser serve the Best. Beest From our most compact stump grinders and hand-fed chippers through our largest whole tree chippers and The Beast® recyclers, Bandit® equipment is built to make you money. We reduce your costs by maximizing fuel efficiency and reducing downtime. And we increase your income by producing the highest quality end product for your market. Bandit builds the best hand-fed chippers, stump grinders, whole tree chippers, The Beast recyclers, track carriers and skid steer attachments in the industry. And equally as important... Bandit Builds Your Bottom Line.
www.banditchippers.com | 1.800.952.0178 | Remus, MI - USA VISIT YOUR NEAREST AUTHORIZED DEALER ER LOCA ATION TION
SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)
STOWERS MACHINERY CORP www.bandit.stowerscat.com
Knoxville, TN (East) Knoxville, TN (West) Chattanooga, TN Kingsport, TN Crossville, TN Sevierville, TN
(865) 546-1414 (865) 218-8800 (423) 698-6943 (423) 323-0400 (931) 484-4040 (865) 595-3750
of Jacksonville
BOBCAT OF JACKSONVILLE www.bobcatjax.com
11657 Phillips Hwy Jacksonville, FL 32256 (904) 288-9181 (904) 288-9182 Fax (877) 213-9408 Toll Free
Page 62 • November 9, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
CRUSHING PLANTS
We Call It EXPERTISE. You Call It PEACE OF MIND.
SCREENING Plants
IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.
Closed-circuit PLANTS
For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.
Crush. Classify. Profit.
w w w. i r o c k c r u s h e r s . c o m
Sennebogen Electric-Drive Supplies Worry-Free Power When Buijs Groot-Ammers Overslag B.V. bought its ninth Sennebogen material handler, the company chose an electric-drive model for the second time to keep the environment healthy and to save on fuel costs. “Once electric, always electric,” said engineer Henk van den Dool. Buijs Groot-Ammers specializes in the trans-shipment of bulk and general cargo, especially raw materials for the feed industry, and Sennebogen purpose-built material handlers are an indispensable part of its business. The first electric model it tried was the Sennebogen 825 that put in about 15,000 hours within a short period of time without any problems. When the material handling demand increased, Buijs Groot-Ammers opted to upsize to a crawler-mounted Sennebogen 830 electric-drive. The 830 has a maximum boom range of 55 ft. 8 in. (17 m), compared to 42 ft. 7 in. (13 m) for the 825, which allows operators to reach the farthest edges of a barge without moving. In fact the 830 is now installed at the edge of the pier. “We decided to purchase an electric material handler again because it is completely emission-free and, ultimately, it saves money. As well, environmentally sound practices promote goodwill in the communi-
ty,” said Wim Buijs, director of operations. Being located on the historic Aa River, the Buijs Groot-Ammers operation is particularly sensitive to environmental contamination. With the electric-drive Sennebogen, not only
are there zero emissions, but there is zero chance of fuel leaks and the administrative nightmare that goes along with them. Of course, the electric-drive also contributes to fuel savings. Buijs reports a 50
Buijs Groot-Ammers replaced its Sennebogen 825 electric-drive material handler with an 830 model to protect the environment and save fuel costs.
percent reduction in operating costs when compared to a diesel-powered machine. But it’s not just the fuel savings. There’s no downtime required for refueling. Maintenance intervals for electric machines are significantly longer, and the hydraulic components last longer than in diesel models. Buijs also can hear the benefits going electric. “The new Sennebogen is significantly quieter than our diesel machines,” he said. Operators appreciate the reduced vibration and noise of the electric drive material handler. In the elevated maXcab, they have the best possible view of the entire worksite for increased safety. A series of cameras and a comprehensive lighting system provide a 360 degree visibility day or night. With the recent enhancements to the maXcab, including optimized cab, comfort seat and ergonomically arranged joysticks and controls, the electric drive Sennebogen makes an ideal workplace, according to the company. For more information, call 704/347-4910 or visit www.sennebogen-na.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • November 9, 2016 • Page 63
A WIRTGEN GROUP COMPANY
POWERFUL PERFORMANCE. JUST TAKE YOUR PICK. MOBICAT MC 110 EVO
MC 110 R EVO I MC 110 Z EVO
EFFICIENT HIGH ACHIEVERS IN TWO VERSIONS. Whether you opt for the MC 110 EVO Z with its independent double-deck prescreen, or the R-version with its vibrating feeders and integrated slotted grate – the crushing unit with its elevated crushing jaw ensures optimal material feed and an impressively high crushing capacity of up to 330 t/h for both systems. Combined with their innovative and cost-effective diesel-directdrive concept and exceptional transportability, powerful performance is guaranteed. The MOBICAT MC 110 EVO.
www.kleemann.info
Page 64 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hurricane Matthew Causes More Than $8B in Damage MATTHEW from page 1
inland rain in North Carolina and areas just across the border in northeastern South Carolina. Further south in Florida, Georgia and coastal areas of South Carolina, the biggest problem was wind and storm surge as the hurricane slammed ocean water into sand dunes, seawalls and low-lying areas from Fort Pierce, Fla., all the way to Cape Hatteras. In the days preceding the storm’s arrival, evacuations were ordered, repair crews were put on emergency standby and the metropolitan areas of Daytona Beach, Jacksonville, Savannah, Charleston and Myrtle Beach all braced for the prospect of winds up to 150 mi. (241 km) per hour and devastating storm surge. Florida The Sunshine State’s beaches and barrier islands, in particular, were predicted to be in serious danger from the expected storm surge, prompting thousands of people to heed Gov. Rick Scott’s warning to leave. As it happened, the weakening storm stayed far enough offshore that the winds were not as bad as feared. Still, with Matthew only about 40 mi. (64.3 km) off the coast at Cape Canaveral, Fla., 80 mph winds damaged roofs and did several million dollars worth of destruction at the Kennedy Space Center. The pounding Atlantic surf caused erosion and damage at almost every beach in central and north Florida, with the towns of Indialantic, Daytona Beach, Flagler Beach, St. Augustine and Fernandina Beach seeing protective dunes ravaged and in need of restoration by off-road trucks, backhoes and dozers. All told, about 15 percent of the state’s East Coast sand dunes were destroyed and 53 mi. (85.2 km) of dunes were overtopped by the storm. Flagler Beach was the scene of one of the more high-profile examples of Matthew’s wrath in the state when storm surge there collapsed a 1.3-mi. (2 km) section of state Road A1A. The highway runs right along the beach, but pounding waves crumbled and then washed away the highway at several spots. After visiting the site shortly after the hurricane moved through, Gov. Scott ordered the repair work to be expedited in order to help the beach community — heavily dependent on tourism — to recover. Work began on Oct. 24 to reopen the road to two-lane traffic within 45 days, according to the Florida DOT. Halifax Paving, from nearby Ormond Beach, was selected to do the temporary repairs from among five bidders. The cost of
Coastal wind and storm surge are a given in any hurricane, but the amount of rain generated miles inland in North Carolina’s I-95/I-40 corridor took everyone by surprise. By late October, the state estimated its flooding damage alone would exceed $1.5 billion.
the contract is $3.95 million. The FDOT believes that the cost of a permanent replacement for the four-lane road could be as much as $35 million and take as long as a year to complete. Georgia Officials and residents in the Peach State feel they dodged a major catastrophe as the weakened hurricane skirted the Georgia coast, but that did not mean the state avoided damage. Top winds of 96 mph, recorded near Savannah, combined with storm surge and heavy rain to bring the region to its knees.
The area from Brunswick to Savannah, part of the state’s low country, took the brunt of the tempest. Many areas east of I-95 experienced extensive flooding with portions of Chatham County seeing 17 in. (43 cm) of rainfall. “Fortunately, we didn’t get the hit from Matthew that we thought we would, but in those low-lying areas around Brunswick we do have some road work to do,” said Natalie Dale, an official with the Georgia DOT. Just east of Savannah, Skidaway Island and Tybee Island were raked by high winds, storm surge and record flooding. Fort Pulaski, a Civil War-era embattlement at the
mouth of the Savannah River, was surrounded by 5.1 ft. (1.5 m) of water above the average highest tide. Roads and bridges in the Brunswick area, including those that connect the mainland with the resort communities on St. Simon’s and Jekyll islands, were cleared of debris and inspected for structural damage. GADOT crews were able to quickly get those routes open again for residents and tourists. Much more damage was done to docks and marinas in several cities and small towns along the Georgia coast. A good example of the storm’s destruction was in Brunswick, where a local company, Sea Tow, was brought in to raise an old shrimp boat that had been slammed against the town’s docks by Hurricane Matthew. The vessel, Three Girls, sank in the Brunswick River after being buffeted by high winds from the northwest and tossed repeatedly against the wooden bumpers of its berth before going under. Sea Tow Brunswick partnered with its sister company in Pensacola, Fla., to bring in people and equipment to do the job. In addition, a sub-contractor, Salonen Marine Inc., Fernandina Beach, Fla., moved its American 100-ton (90.7 t) crane with a supporting barge to the wreck site. After crews cut away and removed the damaged rigging on Three Girls, the American crane hoisted the vessel out of the water on Oct. 26. A total of about a dozen people, made up of an equal number of personnel from all see MATTHEW page 68
Flagler Beach was the scene of one of the more high-profile examples of Matthew’s wrath in the state when storm surge there collapsed a 1.3-mi. (2 km) section of state Road A1A.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 65
LIFT CAPACITY APACIT Y ADVANTAGE AN NTAGE
U UP PT TO O
UP TO
23%*
47% 47 %* MORE MORE
MORE
Compared to GMK5150L L competition
Co Compared m p ar e d to to GMK5150 GMK5150 competition competition
*Preliminary load charts, on radius adius with maximum counterweight counterweight
ANY LIFT. ANYWHERE. The strength and mobility to handle more jobs. The new GMK5150 and GMK5150L deliver great ROI due to outstanding lifting capacities and greater jobsite accessibility.
NEW GMK5150 and GMK5150L Class-leading lifting capacities in oun full and taxi counterw counterweight eight configurations GMK5150L High-performing High-performing boom capable of lifting 11,6 11,6 t with 60 m boom — ideal for for tower tower crane rigging GMK5150 with 51 m boom
•150 t maximum capacity Compact dimensions with rreduced educed ov erall length and width overall
•Narrow 2,75 m width on 445/95R25 tires •Fuel-efficient single-engine design Impressive lifting, jobsite maneuverability and fuel efficiency help you achieve greater profits.
Crane Control Control System System (CCS) (CCS) with Boom Configurator enhances operator control control and efficiency
Contact your local Grove dealer, or go to www.manitowoccranes.com to learn more.
Easy operator access on the crane for secure, for secure, fast rigging; especially when working at heights
HE-equipment.com
www.cowin.com Birmingham, AL 205-841-6666 Mobile, AL 36608 251-633-4020 Montgomery, AL 334-262-6642 Pensacola, FL 850-479-3004 Huntsville, AL 256-536-9390 Decatur, AL 256-350-0006 Oxford, AL 256-832-5053
Springdale, AR 479-927-1672 Little Rock, AR 501-568-7867 Shreveport, LA 318-746-5272 Alexandria, LA 318-443-7173 Lafayette, LA 337-837-9600 Lake Charles, LA 337-528-2661
Baton Rouge, LA 225-356-6113 Kenner, LA 504-467-5906 Memphis, TN 901-375-4902 Nashville, TN 615-248-0266 Chattanooga, TN 423-499-7700 Arden, NC 828-684-1692
www.ringpowercrane.com Charlotte, NC 704-504-2870 Raleigh, NC 919-781-9454 Winston-Salem, NC 336-767-6900 Chesapeake, VA 757-295-4944 Ashland, VA 804-798-9740 Roanoke, VA 540-362-3600 Warrenton, VA 540-349-2878
St. Augustine, FL 904-737-7730 Pompano Beach, FL 954-971-9440 Tampa/Orlando, FL 407-855-6195 Miami (Int. Sales) 305-477-8717 Union City, GA 770-774-7300 Concord, NC 704-795-3636 Ladson, SC 843-818-1954
Page 66 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ELFA Survey: New Business Volume for Sept. Up From 2015 BUILDING AMERICA
SINCE 1859, GEHL HAS CREA CREATED TED INNOV INNOVATIVE ATIVE SOLUTIONS FOR EQUIPMENT OWNERS AND USERS. Today, T oday o y, Gehl carries the tradition forward with a complete line of skid loaders, track loaders, articulated loaders and compact excavators GHVLJQHG ZLWK SURGXFWLYLW\ DQG HI¿FLHQF\ LQ PLQG GHVLJQHG ZLWK SURGXFWLYLW\ DQG HI¿FLHQF\ LQ PLQG A full line of EDGE attachments are available for Gehl loaders and compact excavators for added versatility around the jobsite.
WOULD YOU LIKE A FREE FLEET OF NEW EQUIPMENT? SECTION 179 & BONUS DEPRECIA ATION TION ALLOW UP TO $500,000 IN T TAX AX INCENTIVES* *Check with a tax professional for more details.
CALL YOUR LOCAL GEHL DEALER TODAY!
www.gehl.com www w.gehl.com
DON ALLISON EQUIPMENT, INC. www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 800-669-6450 • 205-387-1600 • Fax: 205-387-1668
RICHMOND MACHINERY & EQUIPMENT COMPANY www.richmondmachinery.com 1701 Roseneath Road, Richmond, VA 23230 804-359-4048 • Fax: 804-359-4179
The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity from 25 companies representing a cross section of the $1 trillion equipment finance sector, showed overall new business volume for September was $9.4 billion, up 12 percent year-over-year from new business volume in September 2015. Volume was up 22 percent month-tomonth from $7.7 billion in August. Year to date, cumulative new business volume decreased 4 percent compared to 2015. Receivables over 30 days were 1.31 percent, relatively unchanged from the previous month and up from 1.10 percent in the same period in 2015. Charge-offs were 0.46 percent, up from 0.44 percent the previous month. Credit approvals totaled 76.6 percent in September, down slightly from 76.9 percent in August. Total headcount for equipment finance companies was up 3.8 percent year over year. Separately, the Equipment Leasing & Finance Foundation’s Monthly Confidence Index (MCI-EFI) for October is 56.0, an
increase from the September index of 53.8. ELFA President and CEO Ralph Petta said, “September new business volume was strong, showing the first double-digit increase in many months. Perhaps the Fed’s decision to keep interest rates low has contributed to this favorable environment for equipment investment by businesses. The uncertainty caused by the upcoming Presidential election, which has acted as a drag on overall economic growth and low capital spending for most of this year, seems to have waned — at least in the short-term.” Stan Walker, managing director, JPMorgan Equipment Finance, said, “The September MILFI-25 data reflected a nice bump in volume activity, although it’s yet to be seen if this is a trend or an anomaly. Despite the unclear environment, our firm has seen strong volume growth for the year and our portfolio credit metrics remain solid. For more information, visit www.elfaonline.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
ARTBA Names 2016 Division Award Winners at Convention The American Road & Transportation Builders Association (ARTBA) recognized transportation design and construction industry leaders Oct. 5 with division awards during the association’s national convention, held in Tucson, Ariz. The association announced the following honorees: Guy Kelcey: Tim Faerber, senior vice president, HNTB Corp. This award, which honors Guy Kelcey, one of the Planning & Design (P&D) division’s organizers, is given each year to an ARTBA member who has exhibited a high degree of service to the association’s P&D Division. Paul F. Phelan Memorial: Randy Lake, CEO, Oldcastle Materials Established in 1971, it is given annually in recognition of outstanding contributions to the ARTBA Materials and Services Division and the transportation construction industry. John “Jake” Landen Memorial Highway Safety: King Gee (public sec-
tor), director of Engineering and Technical Services for the American Association of State Highway and Transportation Officials (AASHTO) and 35-year leader at the U.S. Federal Highway Administration; and Bryce Anderson (private sector), chairman of Ennis-Flint. Established in 1989 in memory of Traffic Safety Industry Division leader and Past ARTBA Chairman (1976) J.C. Landen, this annual award recognizes outstanding contributions to highway safety. S.S. Steinberg: Teresa Adams, professor of Civil & Environmental Engineering, University of Wisconsin Madison Created in honor of S.S. Steinberg, the founding president of the Research and Education Division, the award recognizes an individual who has made remarkable contributions to transportation education. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 67
RISH EQUIPMENT COMPANY www.rish.com Bluefield, WV • 304/327-5124 Chesapeake, VA • 757/485-2100 Chester, VA • 804/748-6411 Coeburn, VA • 276/395-6901 Opal, VA • 540/439-0668 Salem, VA • 540/380-2090 Staunton, VA • 540/887-8291
POWER EQUIPMENT www.powerequipco.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283
P
TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621
MY CUSTOMERS LOVE KOMATSU!
Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500
SUPPORTED WITH PRIDE
Page 68 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
I-95/I-40 in N.C. Sees $1.5B in Damage Due to Flooding MATTHEW from page 64
three companies involved, completed the salvage operation, according to Henry Wynn, Sea Tow Brunswick’s operations manager. That included divers, rigging crews and deck hands. Wynn described the recovery of the Three Girls as a two-day job after the logistics were worked out and the equipment was delivered to the site. “Once we cleared the gunwales and got her raised with the crane, we de-watered her for several hours with five or six pumps,” he said. “When it was determined that there was not any major structural damage to her hull, we then towed her to a yard to be scrapped.” South Carolina As if it were reading a map, Hurricane Matthew turned more northeastward to follow the Atlantic coastline as it crossed over into the Palmetto State, again staying just offshore. If anything, though, the storm’s destruction was just beginning. Eighty-five mph winds and a 7-ft-storm surge flooded the state’s famed Low Country, an area that includes Hilton Head Island and the barrier islands around Charleston. The city itself saw ocean water breach a seawall and flood several neighborhoods. Finally, Matthew made its first, and only, landfall in the United States as a Category 1 storm at Cape Romain National Wildlife
Refuge, north of Charleston, on the morning of Oct. 8. It then began moving back off the coast, but not before dumping incredible amounts of rain in the area west of the hurricane’s eye. Roads became blocked with debris and flood waters along the state’s coastal region and northeast inland, leaving the SCDOT with months of cleanup and repairs in its future. “We had about 441 road closures after the storm and we are down to about 54 today [Oct. 26],” said Pete Poore, communications director of SCDOT. “The biggest problem was in that northeast corner of the state, away from the coast. We still have a number of roads underwater there and we don’t know the extent of their damage yet.” Poore listed the counties of Marion, Dillon and Florence as among those hardest hit by flooding. The small town of Nichols, with only 400 residents, was completely evacuated after the nearby Lumber River flooded homes and businesses to their rooflines. A few spots along I-95 were washed out by flood waters along the Pee Dee River system, but Poore said they were fixed and open within a day or two. Farther south in the Low Country, a number of barrier islands, such as Ladys Island and Harbor Island, had damage to the approaches to key bridges, but not to the spans themselves. Poore said that those repairs have been completed. “Even though assessments are still being
made in the flooded counties, a handful of bridges will have to be awarded to contractors for repairs,” he said. Right now, the SCDOT is working on most repairs and clean up with its own maintenance crews. “Part of the reason for the rapid reopening of roads here is that we had crews standing by in the upstate region, which saw little to no damage, before the storm,” Poore said. “Sign crews and signal crews were sent in to the northeast area quickly. They also sent bridge inspectors to rotate in with the local crews and that has helped immensely.” North Carolina Coastal wind and storm surge are a given in any hurricane, but the amount of rain generated miles inland in North Carolina’s I95/I-40 corridor took everyone by surprise. By late October, the state estimated its flooding damage alone would exceed $1.5 billion. Assessments in North Carolina are still being made as flood waters slowly recede after the immense amount of rain that hit on Oct. 8. As much as 15 to 18 in. (38 to 45 cm) fell in many communities in and around I-95 from the South Carolina border north to the Rocky Mount area. A number of river systems in the state reached record flood stages in the two weeks after the hurricane dissipated, including the Lumber, Neuse, Tar and Lower Little. People living in the cities and towns of Fayetteville, Greenville, Kinston, Goldsboro, Smithfield, Rocky Mount,
The pounding Atlantic surf caused erosion and damage at almost every beach in central and north Florida, with the towns of Indialantic, Daytona Beach, Flagler Beach, St. Augustine and Fernandina Beach seeing protective dunes ravaged and in need of restoration by off-road trucks, backhoes and dozers.
Manchester, Princeville and Lumberton all saw homes and businesses under water. The NCDOT reported that more than 600 roads were closed in the state when the flood waters were at their worst, but according to Steve Abbott, communications officer of the agency, by Oct. 26 that number had been reduced to about 350. Many of those are in the Lumberton area, which garnered much of the national attention due to its severe flooding. “Once the water recedes, we have had to go out and inspect all the roads and remove any debris,” he said. “The inspection process is important because in a lot of cases the road surfaces have been okay, but there is nothing underneath them because the culverts have washed away. Most of the deaths in our state have come as a result of people driving around those barricades and being swept away.” Because of the disaster, the NCDOT is able to move quickly to get contractors lined up to do the repair and recovery work, Abbott said. Although many key roads and bridges are already fixed and traffic is moving, such as on the affected interstates, many others will take months to be put back in working order. “There are no temporary fixes with these roads,” Abbott said. “Once they are washed out, they need to be repaired for the long haul.” Another high profile road in the state that was addressed quickly was N.C. 12, the only major road running along the Outer Banks. The two-lane road travels along a narrow spit of land that in many places has the Atlantic Ocean on one side and Albemarle Sound on the other. Matthew caused an abnormally high tidal surge that overwashed and crumbled about 125 ft. (38 m) of the highway in Kitty Hawk. Crews were able to come in and begin repairs, with the NCDOT hoping the job would be finished in the first week of November. Good Riddance The outer bands of Matthew then raked through the far eastern Virginia, where it killed two people and caused street flooding, before moving out into the Atlantic and dissipating on Oct. 10. Undoubtedly, the hurricane was not as devastating as predicted because of its remaining offshore for most of its track. But for all those folks whose lives were shattered by the flooding, death and destruction caused by Matthew, that fact provides little comfort. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 69
Authorized Authorized Doosan Doos an De Dealers aler s
AL ALABAMA ABAMA Heav y M Heavy Machinery achiner y & T Tractor ractor C Co. o. A Albertville lber t ville | 256-878-1631 256-878-1631 • 86 866-867-4374 6-867-4374 w www.hmtc.us w w.hmtc.us
ARKANSAS AR K ANSAS A Alma lma T Tractor ractor & Equipment Equipment A Alma lma | 479-632-6300 479-632-6300
RUN STRONG.
www.almatractor.com w w w.almatractor.com
FFLORIDA LORIDA B Bobcat obcat o off D Daytona aytona B Beach each D Daytona aytona B Beach each | 3 386-274-1002 86-274-1002 B Bobcat obcat of of Jacksonville Jacksonville JJacksonville acksonville | 904-288-9181 904-288-9181 www.bobcatjax.com w w w.bobcatja x.com
B obcat o Bobcat off Tallahassee Tallahassee M idway | 850-222-7444 Midway 850-222-7444
G GEORGIA EORGIA C Cowin owin Equipment Equipment C Company, ompany, Inc. Inc. M Mableton ableton | 404 404-696-7210 -696-7210 w www.cowin.com w w.cowin.com
LLOUISIANA OUISIANA D uhon M achiner y o afayette, LLLC LC Duhon Machinery off LLafayette, S cott | 33 7-408-4050 Scott 337-408-4050 D uhon M achiner y C o., IInc. nc. Duhon Machinery Co., S St. t. R Rose ose | 504-466-5495 504-466-5495 • 888 888-427-6408 -427-6408 www.duhonmachinery.com w w w.duhonmachiner y.com
MI MISSISSIPPI SSISSIPPI er vices H&E H&E Equipment Equipment S Services -373-0444 JJackson ackson | 601 601-373-0444 w www.cowin.com w w.cowin.com
N NORTH ORTH CAROLINA CAROLINA H&E H&E Equipment Equipment S Services er vices Arden | 82 8-684-1692 Arden 828-684-1692 C Charlotte harlotte | 70 704-504-2870 4-504-2870 R aleigh | 9 19-781-9454 Raleigh 919-781-9454 W Winston-Salem inston-Salem | 33 336-767-6900 6-767-6900 w www.cowin.com w w.cowin.com
SOUTH SOUTH CAROLINA C A RO L I N A H&E H&E Equipment Equipment S Services er vices C Columbia olumbia | 803-776-8465 803-776-8465 G Greenville reenville | 864-272-2600 864-272-2600 w www.cowin.com w w.cowin.com
T TENNESSEE ENNESSEE
Want to run strong equipment? Run Doosan.
Bobcat of Bobcat of Nashville Nashville LLaVergne aVergne | 61 615-941-4000 5-941-4000 www.bobcatofnashville.com w w w.bobcatof nashville.com
Ser vices H&E H&E Equipment Equipment Services M Memphis emphis | 901-375-4902 901-375-4902 w www.cowin.com w w.cowin.com
Request FREE product information:
DoosanEquipment.com/RunStrong21
V VIRGINIA IRGINIA H&E Equipment Equipment S er vices H&E Services Ashland Ashland | 80 804-798-9740 4-798-9740 Norfolk Nor fo olk | 7 757-295-4944 57-295-4944 R Roanoke oanoke | 540-362-3600 540-362-3600
Doosan ® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Construction Equipment. All rights reserved. | 49040-2
Warrenton Warrenton | 5540-349-2878 40-349-2878 w www.cowin.com w w.cowin.com
Page 70 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Retired Caterpillar Inc. Chairman, CEO, Glen Barton Passes Away at 77 Glen Barton, former Caterpillar Inc. chairman and chief executive officer (CEO), died Oct. 24 in Peoria, Ill., at age 77. Mr. Barton retired in 2004 after nearly 43 years of Caterpillar service, spending the last five as chairman and CEO. “The Caterpillar family is extremely saddened by Glen’s passing,” said Caterpillar Chairman and CEO Doug Oberhelman. “Glen’s legacy of leadership extends far beyond Caterpillar’s walls. His commitment to Peoria and our communities was remarkable. I’ll start with his Caterpillar leadership. He rose through the Caterpillar ranks, starting in 1961 as a college graduate trainee. Under his leadership, Caterpillar fully embraced 6 Sigma. It brought remarkable improvements throughout the company, including an intense focus on quality and safety. We continue that focus today, and 6 Sigma remains our foundation for continuous improvement. We are forever indebted to him for his commitment to making Caterpillar a stronger company. “And just as important is his unprecedented generosity to the Peoria area. Glen’s dedication and hard work will continue to leave a positive impact for many, many future generations. Together with his wife Polly, Glen was the epitome of philanthropic leaders. He was the driving force behind Quest Charter Academy and a tireless leader and supporter of the Peoria Zoo, the Peoria Playhouse, WTVP and Illinois Central College. Our deepest condolences are extended to Polly and the entire Barton family.” Mr. Barton joined Caterpillar in 1961 and held numerous marketing and general management positions. After two tours with Caterpillar Overseas S.A. in Geneva, Switzerland, where he served in various marketing capacities from 1964 to 1968, and from 1972 to 1975, Mr. Barton became manager for South American Sales. In 1977, he became manager of Merchandising Division General Offices. Mr. Barton moved to Mentor, Ohio, in 1983 to become the U.S. sales and product support manager for the industrial lift truck division of Caterpillar. From 1984 through 1986, he was manager of Products Control, involved in product development and strategic planning. In 1987, he was elected a
GROWERS EQUIPMENT CO. 2695 Davie Road Davie, FL 33314 954-916-1020 www.growersequipment.com
CHARLOTTE TRACTOR 1700 Starita Road Charlotte, NC 28206 704-596-8900 www.charlottetractor.com
DITCH WITCH OF TENNESSEE Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576 www.ditchwitchtn.com
GREENSBORO TRACTOR 2820 S. Elm-Eugene Street Greensboro, NC 27406 336-273-3606 www.greensborotractor.com
FUTCH’S TRACTOR DEPOT, INC. 8515 SR 207 N. Hastings, FL 32145 904-692-3673 www.futchstractordepot.com
COASTAL EQUIPMENT SYSTEMS 5287 New Kings Road Jacksonville, FL 32209 904-924-9624 www.coastalequipmentsystem.com
CREEL TRACTOR CO. 3771 Palm Beach Blvd. Fort Myers, FL 33916 239-694-2185 Fax: 239-694-6059 www.creeltractor.com
RICHARDS TRACTOR AND IMPLEMENTS 1995 N.E. 8th St. Homestead, FL 33033 305-247-8711 www.ritrac.com
CROSBY EQUIPMENT COMPANY, INC. 1826 South Peterson Ave. Douglas, GA 31535 915-384-4664
Glen Barton
vice president of Caterpillar and president of Solar Turbines Incorporated, a wholly owned Caterpillar subsidiary in San Diego, Calif. In 1989, he became executive vice president with responsibility for worldwide marketing. Effective July 1, 1990, Mr. Barton became group president with responsibility for the design, development and production of most of Caterpillar’s extensive line of forest, mining and construction equipment. His responsibilities also included marketing and sales operations in North America, South America, Latin America and Japan. On Feb. 1, 1999, he was named chairman and chief executive officer. Mr. Barton, a native of Alton, Mo., graduated from the University of Missouri-Columbia in 1961 with a bachelor’s degree in civil engineering. He completed the Stanford University Executive Program in 1977. He previously served on the Dean’s Engineering Advisory Council at the University of Missouri-Columbia and
the boards of directors of Inco Limited and Newmont Mining Corporation. He also was a global advisor to The Conference Board and a trustee of the Malcolm Baldrige National Quality Award Foundation. Mr. Barton also served as a member of the Business Roundtable, the Illinois Business Roundtable and the U.S. President’s Export Council. In 2012, Mr. Barton was recognized for helping pave the way for the company’s leadership in the global mining industry with his induction into the National Mining Hall of Fame. The Hall of Fame credits him with the foresight to more heavily involve Caterpillar in mining: “Glen Barton’s passion changed the mining industry. His leadership made Caterpillar the world’s leading provider of mining equipment by creating the roots that support the organization today.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
631 Electric Rd. Swainsboro, GA 30401 478-237-8372 www.crosbyequipimentco.com
FLORIDA COAST EQUIPMENT 357 Pike Road W. Palm Beach, FL 33411 561-369-0414 694 Commerical Blvd. Naples, FL 34104 239-435-1667 15900 Westpark Lane Fort Pierce, FL 34945 772-461-1003 www.floridacoasteq.com
ATLANTA KUBOTA 879 Pickens Industrial Drive Marietta, GA 30062 770-794-0500 521 Cobb Parkway North Marietta, GA 30062 770-794-0500 www.atlantakubota.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 71
ntoo Sa Savings avvings in Shift Shiff t IInto
KUBOTA KUBO TA A SALES EVENT EV
*$0 down, 0% A.P.R. financing for up to 60 months on purchases of new Kubota KX Series equipment is available to qualified purchasers from participating dealers’ in-stock inventory through 12/31/2016. Example: A 60-month monthly installment repayment term at 0% A.P.R. requires 60 payments of $16.67 per $1,000 financed. 0% A.P.R. interest is available to customers if no dealer documentation preparation fee is charged. Dealer charge for document preparation fee shall be in accordance with state laws. Inclusion of ineligible equipment may result in a higher blended A.P.R. 0% A.P.R. and low-rate financing may not be available with customer instant rebate offers. Financing is available through Kubota Credit Corporation, U.S.A., 3401 Del Amo Blvd., Torrance, CA 90503; subject to credit approval. Some exceptions apply. Offer expires 12/31/2016. See us for details on these and other low-rate options or go to www.kubota.com for more information. Optional equipment may be shown.
kubota.com
© Kubota Tractor ract Corporation, 2016
Page 72 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FLINT Construction & Forestry Division Albany, GA 229/888-1212 Adairsville, GA 770/773-9857 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Macon, GA 478/788-1586 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370
Troy, AL 334/566-4181 Dothan, AL 334/794-8691 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420
Bobcat of Jacksonville
James River Equipment
Meco Miami, Inc.
Pittman Tractor Company, Inc.
www.bobcatjax.com 11657 Philips Highway Jacksonville, FL 32256 904/288-9181
Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200
www.mecomiami.com 5825 N.W. 74th Ave. Miami, FL 33166 305/592-4332
www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251/621-3555
Bobcat of Nashville www.bobcaofnashville.com 149 Industrial Blvd. La Vergne, TN 37086 615/941-4000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 73
EARTHMOVER CONSTRUCTION EQUIPMENT LLC A Division of Advantage Construction Equipment & Parts 8451 SW Old Kansas Ave. Stuart, FL 34997 407-401-8956 www.constructionequip.com
MECO MIAMI, INC. 5825 NW 74th Avenue Miami, FL 33166 305-592-4332 www.mecomiami.com
RICHARDSON SERVICE 1991 INC. 2667 U. S. 378, Conway, SC 29527 800-968-0754 www.rs91inc.com
TUFF EQUIPMENT COMPANY 181 Industrial Blvd. LaVergne, TN 37086 615-851-4345 1-877-634-TUFF www.tuffequipco.com
MAY HEAVY EQUIPMENT RENTAL & SALES Raleigh, NC 866-629-3784 www.mayequip.com
CENTRAL ATLANTA TRACTOR SALES, INC. 7330 Delta Circle Austell, GA 30168 770-819-6600 www.centralatlantatractor.com
Page 74 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NHI Offers Web-Based Design Program
Outcomes • list the primary capabilities of HY-8 • identify inlet and outlet control situations from the culvert summary tables • list the material types used in culverts • list the material shapes that may be analyzed within HY-8 • select a culvert from a list of available culverts that satisfies headwater and outlet velocity criteria by using HY-8. • predict the effect of lining material (new or rehabilitated) on headwater • identify common pitfalls in using HY-8 in convention-
al design scenarios • identify situations appropriate for application of special culvert geometries • identify situations requiring energy dissipation to mitigate scour or high outlet Velocities. • select an appropriate energy dissipator by using HY-8. • identify the steps to generate customized HY-8 reports.
Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. GO WITH KOMAT With Komatsu CARE you can:
Target Audience The target audience is comprised of federal, state, and local hydraulic engineers, highway designers and design consultants who have responsibility for the analysis, design and review of culverts. Length of service with an organization or status within an organization would not be a factor in that this training could apply to anyone that has a need for hands-on use of HY-8. Course 135094, Culvert Hydraulic Analysis and Design Program (HY-8) (Web-based) is a prerequisite for Course 135080, Hydrologic Analysis and Modeling with WMS. Mastery of the concepts covered in this WBT is important to successful completion of Course 135080. NHI Web-based training can be accessed from any computer with an internet connection via the My Training page. Remember, you can access a WBT at any time and return to it as many times as you wish, although the final exams can only be completed once. For more information, call 877/558-6873 or visit nhicustomerservice@dot.gov. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
It’s just part of our Program Komatsu designed to deliver complete CARE contact your 3 years, plus 2 c service and support solutions to Komatsu customers.
DroneDeploy Launches Service Directory DroneDeploy, a leading cloudbased drone software platform, unveiled the Drone Mapping Directory, a drone mapping marketplace to connect businesses with drone service providers. At launch, the Drone Mapping Directory unites more than 250 drone service providers operating in 48 countries and servicing 10 industry verticals. DroneDeploy also announced the launch of a co-branded offering, which enables companies to brand their DroneDeploy portal and maps. The emerging global market for businesses using unmanned aerial vehicles (drones) is expected to be valued at more than $127 billion by 2020, according to PwC. However, a common challenge in nascent markets is creating an efficient marketplace. The Drone Mapping Directory was developed in response to DroneDeploy users frequently asking for drone service provider references. Now businesses will more easily be able to find quality drone services to help them gain aerial insights. Businesses will be able to search
DroneDeploy’s Drone Mapping Directory to identify and contact drone pilots and service providers for free based on their location and industry vertical, and get relevant information, such as: services description, insurance coverage, certifications and industry specializations. More than 12,000 individuals have been certified as remote pilots under the FAA Part 107 since the rule went into effect on Aug. 29, 2016, which has made it difficult for businesses to distinguish between high quality and low quality drone service providers. The Drone Mapping Directory will help businesses better evaluate service provider quality by showcasing their previous drone mapping projects. “Drone companies that invest in their customers’ growth help develop and advance the commercial drone industry as a whole,” said Eric Harkins, founder and CEO of Back Forty Aerial Solutions. “DroneDeploy gets it, and their new operators network allows us to reach new customers while leveraging their
software to grow our business.” DroneDeploy is used by businesses in more than 130 countries, including thousands of drone service providers. Now with the release of co-branding, these service providers will have the opportunity to build brand awareness by prominently displaying their logo on the maps they share with prospects and clients. “The drone service provider is the backbone of the drone economy,” said Mike Winn, co-founder and CEO of DroneDeploy. “They have been the early adopters and have exposed businesses globally to the benefits of fast and accurate aerial data. Now, more businesses than ever before are ready to adopt and scale their drone operations, and needing service providers to help them. Our new Drone Mapping Directory and co-branded offering will help bring these parties together more efficiently and unlock value for everyone.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
>>>>>
National Highway Institute’s (NHI) web-based training course 135094, Culvert Hydraulic Analysis and Design Program (HY-8), provides training on the use of the Federal Highway Administration’s (FHWA) HY-8 computer program to complete culvert analysis and design calculations commonly performed by civil engineers and others involved in roadway design. This web-based training uses a combination of text, graphics, examples, animations and workshop problems in its six primary lessons: • HY-8 overview • conventional design scenarios • rehabilitative linings/common pitfalls in HY-8 use • special geometries • energy dissipation • project file management and report generation Upon completing the course, participants will be able to apply the HY-8 software to analyze and design culverts in many commonly encountered situations.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
TIER 4 INTERIM E
• Lower your cost of ownership MAINTENANCE B • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment
y Komatsu T CARE complim
To learn more e about Komatsu distributor or scan
thisCARE QR code Komatsu
To learn more about with your contact your Komatsu distributor or scan smart phone. this QR code with your smart phone.
Q
Lower your c
Q
Increase equ
Q
Protect the va
It’s just part of ou solutions to Kom
MIDWEST KOMATSU DISTRIBUTORS
H&E Equipment Services www.he-equipment.com AR Little Rock 501-568-7867 800-632-0577 Springdale 479-927-1672 888-200-6343 LA Alexandria 318-443-7173 800-249-8485 Baton Rouge 225-356-6113 800-872-1305 Bossier City 318-746-5272 800-643-2844 Broussard 337-837-9600 877-463-9914 Kenner 504-467-5906 800-203-1869 Sulphur 337-528-2661 800-258-1614
Linder Industrial Machinery www.linderco.com FL Ft. Myers 239-337-1313 Jacksonville 904-786-6710 Ocala 352-629-7585 Orlando 407-849-6560 Pembroke Pines 954-433-2800 Plant City 813-754-2727 West Palm Beach 561-863-0570 NC Arden 828-681-5172 Charlotte 704-376-7554 Greenville 252-695-6200 Greensboro 336-665-0110 Raleigh 919-851-2030 Wilmington 910-254-2031
W E S T K O M AT S U D I S T R I B U T SC UT Soldotna Bacon-Universal Hurric 907-262-5977 Company,Greer Inc Company, Inc.. 435-9 800-254-5977 864-877-8962 Salt L Wasilla HI 801-9 North Charleston 907-376-3838 Hilo 800-973-2607 South 808-935-8595 843-552-0095 801-9 800-352-3508 Kirb Kirby-Smith y-Smith Mac Machinery hinery Inc Inc.. WY West Columbia Honolulu Gillett 808-839-7202 803-794-6150 307-6 800-352-3508 Kailua-Kona 808-326-1212 800-352-3508
OK
Oklahoma City 405-495-7820 800-375-3339 Tulsa 918-438-1700 800-375-3733
Rock S 307-6
Lyle Machinery Co.Mode
Kauai (Lihue) 808-245-8472 800-352-3508
www.lylemachinery.com MS TX Columbus Abilene 325-692-6334 877-577-5729 662-243-2152 Claremont Clar emontHattiesburg Equipment Co Co.. Amarillo 806-373-2826 .clairemontequipment.com 800-283-1247 601-296-7556 CA Dallas Escondido Jackson 214-371-7777 760-739-9100 800-753-1247 601-939-4000 Imperial Ft Worth Magnolia 760-355-7700 817-378-0600 877-851-9977 San Diego 601-783-2111 858-278-8351 Lubbock Saucier 806-745-2112 Craig Taylor Equipment Cr 866-289-6087 Company 228-832-7575 Wailuku Maui 808-244-9158 800-352-3508
ylorequipment.com AK
Komatsu Equipment Co. Co. tsueq.com
Power Equipment
Anchorage 907-276-5050 800-279-5051
NV
Elko www.powerequipco.com 775-753-7561 North Las Vegas MS 702-399-1004 Saltillo Reno 775-356-1334 662-869-0283 TN Chattanooga 423-894-1870 Kingsport 423-349-6111 Knoxville 865-577-5563 LaVergne 615-213-0900 Memphis 901-346-9800
Fairbanks 907-452-1192 800-452-1192
ID
Boise 208-3 800-2 Pocate 208-2 800-8 MT
Billing 406-2 800-7 Kalisp 406-7 800-4 Misso 406-5 800-3 OR
Eugen 541-6 800-8 Portla 971-2 800-9
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 75
Rish Equipment Company www.rish.com MD Frostburg 301-689-2211 VA Bealton 540-439-0668 Chesapeake 757-485-2100 Chester 804-748-6411 Coeburn 276-395-6901 Salem 540-380-2090 Staunton 540-887-8291 WV Beckley 304-255-4111 Bluefield 304-327-5124 Bridgeport 304-842-3511 Logan 304-752-9313 St. Albans 304-755-3311
Tractor & Equipment Company www.tractor-equipment.com AL Alabaster 205-621-2489 Anniston 256-831-2440 Birmingham 205-591-2131 Decatur 256-355-0305 800-321-6865 Dothan 334-678-1832 Mobile 251-457-8991 800-233-7213 Montgomery 334-288-6580 800-832-9563 Tuscaloosa 205-752-0621 Tuscumbia 251-275-4159 FL Panama City 850-763-4654 Pensacola 850-505-0550 GA Albany 229-435-0982 800-733-0962 Augusta 706-798-7777 800-659-3090 Calhoun 706-879-6200 800-827-3072 Columbus 706-562-1801 877-307-6439 Forest Park 404-366-0693 Hoschton 706-654-9850 888-334-9850 Kennesaw 678-354-5533 Macon 478-745-6891 Savannah 912-330-7500 800-827-1405
www.komatsuamerica.com/komatsu-care
i"U 3JTI * TFMM B XJEF WBSJFUZ PG RVBMJUZ ,PNBUTV QSPEVDUT 5IF 8" GPS FYBNQMF XJUI IZESPTUBUJD USBOTNJTTJPO HJWFT UIF PQFSBUPS RVJDL USBWFM SFTQPOTF BOE JODSFEJCMF EJHHJOH QPXFS *U T B NBDIJOF EFTJHOFE UP CF FBTZ BOE NPSF FGmDJFOU UP PQFSBUF 5IFZ EFTJHO QSPEVDUT UIBU TBUJTGZ NZ DVTUPNFST BOE UIBU T XIZ * ". ,0."546 w
SUPPORTED WITH PRIDE
Page 76 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
$2,000 for Escarcega…
Simformotion LLC Announces Cat Simulators 2016-2017 Scholarship Winner Simformotion LLC — a leader in heavy equipment simulator development — is pleased to announce that John Escarcega of Eloy, Ariz., has been awarded the 2016-2017 Cat simulators scholarship. He will receive $2,000 to support his pursuit of a heavy equipment-related career. Applications were accepted from students enrolled in an accredited heavy equipment-related program at an institution that utilizes Cat simulators as part of their training program or curriculum. Escarcega is currently enrolled in the Heavy Equipment and Diesel Technology program at Central Arizona College. His experience with heavy equipment began nearly four decades ago with the United States Army where he worked on equipment ranging from M60 tanks to UH-1 Huey helicopters. When he recently made the decision to return to school and began looking into degree programs, he was impressed with the programs at Central Arizona College and made the decision to enroll. “Everything counts in simulator training,” said Escarcega. “Training with Cat simulators is very real in tasks, conditions and standards. Using them is getting us
ready for the real world.” Simformotion has been awarding the Cat simulators scholarship since 2011. “We are seeing an increased need for skilled professionals in many of the industries that we serve so effective training is needed now more than ever,” said Renee Gorrell, vice president. “Our scholarship is one way we can encourage students to explore heavy equipment related careers and support the schools and training organizations that invest in the programs that contribute to the growth and sustainability of industries like construction, mining and forestry.” Applications for the 2017-2018 Cat simulators scholarship will be accepted beginning in January 2017. Applications can be downloaded at www.catsimulators.com/scholarships/ or email connect@catsimulators.com to request an application form. Anyone meeting the qualifications may submit an application, regardless of where they live in the world. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
ARTBA Names Four Winners of 6th Annual ‘Student Transportation Video Contest’ High school students from Washington state and Massachusetts, an undergraduate at New York University and a graduate student at Carnegie Mellon were all named winners of the American Road & Transportation Builders Association’s (ARTBA) 6th annual “Student Transportation Video Contest.” The selections were announced during the Oct. 4 to 6 ARTBA national convention, held in Tucson, Ariz. They will each receive a $500 cash prize. The association received 30 entries this year in two categories, general transportation and a new safety category. Sponsored by ARTBA’s research and education division (RED), the contest aims to raise awareness about infrastructure issues by challenging students to develop a brief video exploring various topics relating to America’s transportation network. Submission topics ranged from funding the interstate highway system, developing public transit, transportation innovation, infrastructure for cyclists, distracted driving, and autonomous vehicles. The competition was advertised on college scholarship websites, posted on online video contest sites, shared with
Council of University Transportation Centers (CUTC) members and high schools that focus on Science, Technology, Engineering and Math (STEM). It also was shared on ARTBA’s social media accounts. Submissions were reviewed and winners selected by a panel of ARTBA members. General Transportation Category Age Group One (Elementary, Middle or High School Students) Josh Jaffe, Seattle Academy, Seattle, Wash. Jaffe is an 11th grader at Seattle Academy. His video discusses the need to further develop the city’s public transit system to accommodate a growing population, making suggestions to expand and repair current infrastructure to access more communities. Age Group Two (PostSecondary/College/Graduate Level) Timothy Gersten, New York University, New York City Gersten, a film and television major at NYU, describes in his video how infrastructure is financed through the federal gas tax. He mentions how lagging funding leaves roadways and
bridges significantly deficient, and suggests further investment to renew, promote sustainability and develop infrastructure plans. Safety Category Age Group One (Elementary, Middle or High School Students) Christopher Pomeroy, Hopkinton High School, Hopkinton, Mass. Pomeroy’s video discusses the need to incorporate more autonomous vehicles on the road to improve safety for all drivers and reduce road accidents. He is an 11th grader at Hopkinton High. Age Group Two (PostSecondary/College/Graduate Level) Abdi Musse, Carnegie Mellon University, Pittsburgh, Pa. Musse is a graduate student at Carnegie Mellon’s Human-Computer Interaction Institute. His video focuses on the need to improve work zone safety conditions to prevent accidents and deaths. It promotes avoiding distracted driving by limiting phone usage and obeying work zone signage.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
ALABAMA
THOMPSON TRACTOR www.thompsontractor.com Auburn, AL 334-321-2030 Birmingham, AL 205-326-0334 Dothan, AL 334-673-3300 Huntsville, AL 256-532-3001 Mobile, AL 251-452-1180 Montgomery, AL 334-262-1101 Oxford/Anniston. AL 256-835-5737 Shelby County, AL 205-649-9489 Tuscaloosa, AL 205-247-3402
FLORIDA
NORTRAX www.nortrax.com Fort Myers 239-334-3627 Lutz 813-995-0841 Miami 305-592-5740 Orlando 407-299-1212 Pompano Beach 954-977-9541 Riverview 813-621-4902 West Palm Beach 561-848-6618
THOMPSON TRACTOR www.thompsontractor.com Pensacola, FL 850-471-6710
GEORGIA
BORDER EQUIPMENT borderequipment.com Augusta 706-737-9191 Atlanta 770-322-6960 Savannah 912-748-2828
LOUISIANA
H&E EQUIPMENT SERVICES www.he-equipment.com Alexandria 318-443-7173 Baton Rouge 225-356-6113 Kenner 504-467-5906 Lafayette 337-837-9600 Lake Charles 337-528-2661 Shreveport 318-746-5272
Made in the U.S.A. Since 1949
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 77
MISSISSIPPI
SOUTH CAROLINA
PUCKETT RENTS
MAY HEAVYEQUIPMENT RENTAL & SALES
www.puckettrents.com Richland 601-939-5151 Biloxi 228-392-2211 Hattiesburg 601-264-1111 Meridian 601-703-0116 Madison 601-859-5131
www.mayequip.com Columbia 866-629-3784 Charleston 866-629-3784 Greenville VIRGINIA 866-629-3784
COASTAL EQUIPMENT CORP.
www.coastalequipment.net VIRGINIA Virginia Beach COASTAL NORTH CAROLINA 757-424-1900 EQUIPMENT CORP. JAMES RIVER Yorktown www.coastalequipment.net EQUIPMENT Virginia Beach www.jamesriverequipment.com 757-898-1900 757-424-1900 Asheville JAMES RIVER Yorktown 828-667-0176 EQUIPMENT 757-898-1900 Charlotte www.jamesriverequipment.com 704-597-0211 Ashland JAMESAgRIVER Wilkesboro 804-358-6776 EQUIPMENT 336-973-8201 Fishersville www.jamesriverequipment.com Ahoskie 540-337-3057 Ashland Ag 252-332-5550 Winchester 804-358-6776 Fayetteville 540-667-9777 Fishersville 910-424-1200 540-337-3057 Greenville Winchester 252-758-4403 540-667-9777 New Bern 252-638-5838 Raleigh 919-772-2121 Wilmington 910-675-9211
Page 78 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Link-Belt TCC-750 to Increase Efficiency on Projects MABE from page 8
Bryan Mabe (L) and Josh Church stand with their new Link-Belt TCC-750.
crawl that crane forward as we are working. We never have to break it down to move it on the job. That was the biggest thing for us. It just saves a lot of time between set ups at the crane on the job.” Mabe said that he is pleased with his decision to purchase the crane and that he believes the crane will increase efficiency on the job. He also is pleased with the service he has received from his Link-Belt dealer, Pinnacle Cranes. “Pinnacle Cranes has an office in Charlotte, so it’s very easy to get mechanics up here or call down there and talk to them,” said Mabe. “We have few different mechanics we call all the time for trouble shooting problems. Most of the time, you can normally call and get a mechanic the next day. They have most of the parts in house at Pinnacle Crane. That’s probably the biggest advantage. “We are familiar with Link-Belt products, and we have local representatives local that we can get a hold of. We felt that this crane was the easiest to mobilize, to take counterweights off and would work best for our company.” According to Mabe, his job is very rewarding. “I like seeing our work at the end of the day. I like seeing a building go up and changing the landscape of the city, it’s neat. And, of course, all the machinery and everything else about the business are appealing to me as well. I also enjoy the traveling we do as a company.” For more information about Mabe Steel Inc., visit mabesteel.com. For more information about Pinnacle Cranes, visit www.pinnaclecranes.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
G Series Consists of Seven Models for Variety of Applications CASE from page 24
satellite radio (with optional equipment) and music device compatibility also is available to enhance the operator experience. Total Cost of Ownership Every system in the new G Series wheel loaders is engineered together to help produce the greatest amount of production, at the highest rate of uptime, for the lowest total cost of operation. Much of this is achieved with the efficiencies of the engine and related systems, the intuitiveness of the operator environment and the ease of service, according to the manufacturer. “Maintenance is a key factor of the total equation. Over three years ago, Case led the way when they introduced ProCare,” said Dargatz. “ProCare is a comprehensive program that addresses maintenance, warranty and telematics. It embodies our commitment to our customers to lower total cost of ownership.”
ProCare includes a three-year Advanced Case SiteWatch telematics subscription, a threeyear/3,000-hour full-machine factory warranty and a threeyear/3,000-hour planned maintenance contract. For more information, visit www.CaseCE.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
An optional five-speed transmission with lock-up torque converter is available on this 721G as well as the 821G and 921G wheel loaders.
The 521G through the 921G wheel loaders, including this 621G, feature the Case-exclusive mid-mounted Case cooling module, which features coolers positioned in a cube design that ensures access to clean and cool ambient air, while also limiting debris buildup and providing easy access for routine cleaning.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 79
UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.
MINI
SHORT RADIUS
CONVENTIONAL
KOBELCO-USA.COM
Alexandria, LA 318-448-1647 Shreveport, LA 318-226-9696 Monroe, LA 318-388-9300 Little Rock, AR 501-455-5955
www.ScottCompanies.com Memphis, TN Ft.Smith, AR 901-547-8008 479-648-1600 LaVergne, TN Springdale, AR 615-793-3888 479-751-4242 Jackson, MS Texarkana, AR 601-373-4600 870-772-0204
Scott Van Keppel Omaha, NE 402-597-0860 Ankeny, IA 515-964-2762 Cedar Rapids, IA 319-365-9155
www.companywrench.com Lexington, SC 125 Wilson Mills Rd. 803-520-0032 Smithfield, NC 27577 Fax: 803-520-7469 919-938-8145 Knoxville, TN Fax: 919-938-9129 865-766-2571 Fax: 865-766-2815
www.cowin.com Huntsville/Decatur, AL 2238 Pinson Valley Pkwy 256-350-0006 (Decatur) Birmingham, AL 35217 256-536-9390 (Huntsville) 205-841-6666 Oxford, AL Mobile, AL 256-832-5053 251-633-4020 Pensacola, FL Montgomery, AL 850-479-3004 334-262-6642 Atlanta, GA 404-696-7210
www.gsequipment.net GREAT SOUTHERN GS EQUIPMENT CONSTRUCTION Tampa, FL EQUIPMENT 866-586-8956 Orlando, FL Pompano Beach, FL 407-859-9160 954-327-8808 Jacksonville, FL Ft. Myers, FL 904-268-4400 239-334-6063 Tallahassee, FL 850-574-0892
www.highwayequipment.com 8071 Lee Highway Troutville, VA 24175 540-992-4650 Fax: 540-992-3742
Page 80 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Event Features JCB 3CX Backhoe for Competition RODEO from page 12
Many contractors came to the event to compete in the backhoe rodeo.
A local contractor tests out the JCB 55 Z1.
The operator of the JCB 260T compact track loader tests its capability. Billy Wall (R), Company Wrench, goes over the JCB 8040 ZTS excavator with Donald Taylor of Taylor Brothers in Columbia, S.C.
(L-R): Twilla Jeffcoat and Ted Thames, both of SCE&G, receive a warm welcome to the event by Cam Gabbard of Company Wrench.
The JCB 3CX compact backhoe has a 12 ft. (3.6 m) dig depth.
Guests learn more about the JCB line in the JCB tractor trailer.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 81
WE DO MORE THAN DESIGN EQUIPMENT.
WE POWER YOUR SUCCESS.
Whether you are looking for products with the llatest atest ttechnology echnolog y or you want to have your old machine rremanufactured, emanuffactured, Doosan Por table Power can help you achieve success. Focused on ccustomer ustomer ssatisfaction atisffaction and product solutions, our de dealer aler netw network ork is the largest nationwide network in the ind industr y.
CONTTACT YOUR LOCALL DEALER DEAL TODAY. AIR COMPRESSOR SALES ASC CONSTRUCTION EQUIPMENT GEORGIA 5490 Thomaston Road Macon (478) 474-8460
PINNACLE CENTRAL COMPANY, INC. www.pinnaclecentral.com FLORIDA 103 Bryan Street Jacksonville (904) 354-5746 Polk City (888) 253-2444
NORTH CAROLINA 11425 Reames Rd Charlotte (704) 596-8283 Asheville (828) 687-0620 Raleigh (919) 661-8710
SOUTH CAROLINA Columbia (803) 791-0740 Piedmont (864) 704-1060 North Charleston (843) 414-1120
Greenville (252) 754-5280
TENNESSEE Knoxville (865) 525-1845
GEORGIA Savannah (912) 964-8079
Chattanooga (866) 495-3406
DoosanPortablePower.com | 800.633.5206
Sa Sales. les. P Parts. arts. Service. Service. BLANCHARD MACHINERY, INC. www.blanchardmachinery.net FLORIDA 1890 NE 150th St. Miami (305) 949-2581 Fax: (305) 949-0747
COWIN EQUIPMENT ALABAMA
FLORIDA
2238 Pinson Valley Parkway Birmingham (205) 841-6666
Pensacola (850) 479-3004
Mobile (251) 633-4020
Miami (305) 232-2255
Montgomery (334) 262-6642
West Palm Beach (561) 833-4634
Huntsville (256) 350-0006
GEORGIA
RICHMOND MACHINERY www.richmondmachinery.com VIRGINIA 1701 Roseneath Road Richmond (804) 359-4048
Atlanta (404) 696-7210
Oxford (256) 832-5053
LaVergne (704) 280-2762
©2016 Doosan Infracore Portable Power
Page 82 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ELFA Study Reveals Financing to Acquire Equipment Rises by Six Percent Seventy-eight percent of respondents in a survey of businesses used at least one form of financing when acquiring equipment in FY 2015, according to the U.S. Equipment Finance Market Study: 2016-2017 released Oct. 24 by the Equipment Leasing & Finance Foundation. This is up from 72 percent of respondents from the previous Foundation market study released in 2012, and represents an increase in the overall propensity to finance. The survey also shows that 68 percent of the total value of equipment and software acquired in 2015 was financed, a significant increase from the previous estimate of 55 percent forecast in the 2012 Foundation market study. The new study, conducted by IHS Markit, forecasts the U.S. equipment finance market will grow by 1.31 percent to $1.03 trillion in 2016. Total public and private investment in equipment and software grew 4.0 percent in 2015, to $1.5 trillion, according to the study. In 2016, equipment and software investment is expected to be relatively flat, increasing by only 0.5 percent. However, due to excess liquidity and strong competition, which have driven down the cost of borrowing, finance volume is expected to outpace total investment in equipment and software. The study cites excess global capacity, low commodity prices, a strong dollar, sluggish export markets and the collapse in drilling for oil and natural gas as main factors holding back capital investment Ralph Petta, president of the Foundation and president and CEO of the Equipment Leasing and Finance Association, said, “This invaluable research provides a comprehensive picture of the size and scope of the equipment finance sector. In so doing, the analysis reaffirms the industry as an integral component of the U.S. economy, enabling firms — both large and small — to acquire capital assets to operate and grow their businesses.”
companies with lower risk profiles. The share of bank financing of highly profitable companies (profit greater than 20 percent of sales) was 43 percent in 2015, compared to 47 percent in 2011. Meanwhile the share of bank lending to unprofitable companies declined from 53 percent to only 26 percent, as less profitable companies were forced to seek alternative financing options. • The share of cash purchases declined for companies of all sizes from 2011 to 2015. Low interest rates, strong competition among lenders and abundant liquidity have made financing equipment acquisitions especially attractive as lenders compete to offer the best rates to borrowers. • As in 2012 and a previous 2007 Foundation survey, the 2016 Foundation survey confirms that larger ticket purchases are financed to a greater degree than smaller ticket purchases. • The growth of fintech companies has been a major development in the equipment leasing and financing industry recently. Industry experts indicate that fintech companies have driven faster adoption of technology and have contributed to the “digitalization” of the lending process. • Executives with knowledge of the leasing and finance industry indicated that customers are increasingly asking for managed solutions or bundled services and usage-based products. • Most industry experts indicated that they expect very little impact on the demand for leasing from the introduction of new lease accounting standards in December 2018. Under the new guidance, lessees will be required to recognize assets and liabilities for leases with terms of more than 12 months. As the new standards have been under discussion for many years, executives expressed that firms will be prepared for the changes.
Key Findings Highlights from the U.S. Equipment Finance Market Study 2016-2017 include: • Growth in investment in equipment and software is expected to accelerate slightly in 2017, growing at a 3.0 percent rate. By 2020, total investment in equipment and software is expected to reach $1.8 trillion. • The 2015 estimate for the equipment finance market (including software) is $1.02 trillion. The market for equipment and software financing is expected to grow to $1.03 trillion in 2016, and is projected to reach $1.24 trillion in 2020. • Sixty-eight percent of all equipment and software acquired in 2015 was financed. Of that, 39 percent was leased, 16 percent used a secured loan, and 13 percent used a line of credit. This represents a major shift toward the use of leases and secured loans, which accounted for only 17 percent and 9 percent of the total value of financing in 2011, respectively. This also marked a significant shift away from lines of credit, which accounted for 29 percent in 2012. • Bank financing accounted for 47 percent of financed purchases in 2015, compared to 57 percent in the 2012 Foundation market study. While banks’ share of financing activity has decreased, they remain the primary lenders across all equipment types in 2015. Non-bank lenders’ share of equipment financing includes 30 percent for manufacturers and vendors and 16 percent for non-bank independent financing companies. • Banks continue to focus their new financing efforts on
About the Study U.S. Equipment Finance Market Study: 2016-2017 was conducted by IHS Markit for the Equipment Leasing & Finance Foundation to provide comprehensive research on the size and expected growth of the U.S. equipment finance market. The study draws on data from a number of sources, including a custom Foundation borrower survey of businesses that acquired equipment in 2015, conducted in July and August 2016 by IHS Markit on behalf of the Foundation. Additional data sources include the Federal Reserve Senior Loan Officer Opinion Survey on Bank Lending Practices, the Federal Reserve Flow of Funds, the U.S. Department of Commerce Bureau of Economic Analysis, the Equipment Leasing and Finance Association’s 2012 Survey of Equipment Finance Activity and the IHS Equipment Market Monitor. The financing market estimates reflect lending to businesses and government agencies. IHS conducted the previous Foundation market study in 2012. How to Access the Study The U.S. Equipment Finance Market Study: 2016-2017 is available for free download at www.leasefoundation.org/research/sefi. Key findings, a study results fact sheet and table of contents are also available for free download. For more information, visit www.LeaseFoundation.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CCS EQUIPMENT SALES www.ccsequipment.com Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505
MAY HEAVY-EQUIP RENTAL & SALES www.mayequip.com Lexington, NC • 866-629-3784 Charleston, SC • 866-629-3784 Columbia, SC • 866-629-3784 Greenville, SC • 866-629-3784
HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 8071 Lee Hwy. • Troutville, VA 24175 540-992-4150
GROVE RIVER www.groveriver.com 902 Longwood Drive Richmond Hill, GA 31324 912-756-7854
PITTMAN TRACTOR COMPANY, INC. www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251-621-3555
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 83
COWIN EQUIPMENT COMPANY, INC. www.cowin.com Birmingham, AL • 800-239-2694 Montgomery, AL • 800-239-6642 Madison, AL • 256-350-0006 Huntsville, AL • 800-239-7368 Oxford, AL • 800-917-7931 Pensacola, FL • 800-239-4736 Atlanta, GA • 800-849-3540
CLM EQUIPMENT CO., INC. www.clmequipment.com Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Baton Rouge, LA • 255-677-7838 Biloxi, MS • 228-396-8740 Houston, TX • 281-598-2500
GS EQUIPMENT INC. www.gsequipment.com Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892
ONE FOCUS. COMPLETE SOLUTIONS.
GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.com Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400
> > >
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248
> >
> www.heavymachinesinc.com Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453
>
>
Page 84 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Caterpillar 963D Track Loader, 1:50 Scale - $75
Bucyrus Erie 22-B Dragline, 1:50 Scale - $275
Bantam C-35 Dragline, 1:25 Scale - $290
Caterpillar D4 Tractor with 4S Bulldozer, 1:16 Scale - $200
Bobcat S590 Skid Steer Loader, 1:25 Scale - $45
Bucyrus Erie 22-B Cable Shovel, 1:50 Scale - $210
Caterpillar 972K Wheel Loader, 1:50 Scale - $90
Caterpillar 340D L Excavator, 1:50 Scale - $115
Grove GMK3055 Tri-Axle Mobile Crane, 1:50 Scale - $225
John Deere 470G LC Excavator, 1:50 Scale - $85
Caterpillar D9T Track-Type Tractor, 1:50 Scale - $125
Komatsu 275AX-5 Sigma Dozer, 1:50 Scale - $110
Liebherr PR722 Dozer, 1:50 Scale - $80
Volvo EC460 CL Excavator, 1:50 Scale - $190
Allis-Chalmers TS-300 Motor Scraper, 1:50 Scale - $110
Link Belt 800X2 Excavator, 1:50 Scale - $185
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 85
GET MORE DONE WITH ONE. Why run two machines when one will do? Whether you’re loading trucks, busting up blacktop, placing pipe, digging trenches, or moving materials, an LL--Series Backhoe is more than up to the task. By listening and responding to our customers, these versatile machines feature improved hydraulic systems for additional lift capability and superb multifunction performance. And rugged EPA Final Tier 4/EU Stage IV diesel engines* meet rigid emission regulations, enabling work in nonattainment areas. The result: our most versatile backhoes ever. TTaake advantage of unrivaled capability. *Interim Tier 4/Stage IIIB on the 310L EP.
FLINT Construction & Forestry Division
JAMES RIVER EQUIPMENT
www.flintequipco.com
www.jamesriverequipment.com , ,
Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370
Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Aynor, SC 843/358-5688 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420
Ashland, VA 804/798-6001 Manassas, VA 703/631-8500 Winchester, VA 540/667-9777 Tazewell, VA 276/596-9440 Fishersville, VA 540/337-3057 Salem, VA 540/380-2011 Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211
Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200
, ,
u M COASTAL v EQUIPMENT a www.coastalequipment.net
o
e
Virginia Beach, VA 757/424-1900 Yorktown, VA 757/898-1900
, NORTRAX 4 a
5
Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach, FL 954/977-9541 Riverview, FL 813/621-4902 West Palm Beach, FL 561/848-6618
www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 LaVergne, TN (Nashville) 615/501-8600
Page 86 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Liugong Unveils North American Tier IV Final Wheel Loaders LiuGong North America, a wholly owned subsidiary of LiuGong Machinery based in Liuzhou, China, and a global leader in the manufacturing of heavy construction equipment, unveiled its new Tier IV Final HSeries wheel loaders and E-Series excavators to its North American construction equipment dealers during an event in San Diego. The new machines feature cleaner engines, more efficient systems and improvements to the cab that enhance the operator experience. The San Diego event featured machine demonstrations, allowing dealers to see and experience the new Tier IV Final machines firsthand. LiuGong executives and product managers also highlighted LiuGong’s corporate history and provided key updates on the benefits of the new wheel loaders and excavators. “With more efficient and intelligent systems, our new Tier IV Final wheel loaders and excavators are more productive, responsive, easier to operate and have better ergonomics for the operator,” said Marcus Menough, director of sales and marketing, LiuGong North America. “We’ve also invested heavily in the cab and machine design to improve the operator experience and safety of the equipment.”
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.
Nebraska Land Improvement Contractors Association 58th ANNUAL NLICA CONVENTION DATES: JANUARY 17 – 19, 2017 TIME: 6:00 PM PLACE: Holiday Inn Convention Center Kearney, NE For additional information visit www.NELICA.org ASSOCIATED GENERAL CONTRACTORS Advanced Management Program Dallas, Texas DATES: SUNDAY, NOVEMBER 6, 2016 to FRIDAY, NOVEMBER 11, 2016 TRAINING/PROFESSIONAL DEVELOPMENT https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS WebEd: Smarter Construction – Superior project delivery from start to finish with collaborative project management DATE: TUESDAY, NOVEMBER 15, 2016 – 2:00 PM to 3:00 PM TECHNOLOGY https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS WebEd: Cybersecurity Webinar Series DATES: THURSDAY, NOVEMBER 10, 2016 to FRIDAY, DECEMBER 9, 2016 TECHNOLOGY https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Contractor Executive Exchange Changing the Way Contractors Source New Solutions and Build Relationships with Vendors DATES: SUNDAY, DECEMBER 4, 2016 to TUESDAY, DECEMBER 6, 2016 CHARLESTON, SOUTH CAROLINA Other https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Construction Project Manager Course DATES: SUNDAY, DECEMBER 4, 2016 to FRIDAY, DECEMBER 9, 2016 DALLAS, TEXAS
“Customers are going to love the responsiveness, sleek design and enhanced creature comforts of the new machines,” said Dave Hertz, owner and dealer principal of LiuGong dealership Midwest Equipment, who attended the event. “It was great to network with our fellow dealers in San Diego and learn about the new machines directly from LiuGong company executives and North American product managers. The H-Series wheel loaders and E-Series excavators showcased include the 835H, 856H, 890H, 915E, 922E, 925E, 930E and 936E. The new machines feature best-inclass fuel consumption and a modern cab designed to make the working environment more comfortable and machine operation more intuitive. The machines are powered by QSB 4.5, QSB 6.7, QSL 9 and QSG 12 Tier IV Final Turbo-charged Cummins engines, as well as the Perkins 1204F Tier IV Final. These engines meet U.S. Environmental Protection Agency emissions regulations and deliver horsepower ranging from 115-350 hp. The machines also include intelligent cooling systems and closed hydraulic systems that improve machine performance. The machines have enhanced safety feahttps://www.agc.org/connect/events-calendar Missouri Land Improvement Contractors Damage Prevention and Excavation Safety Summit DATES: WEDNESDAY, DECEMBER 7, 2016 to THURSDAY, DECEMBER 8, 2016 LOCATION: OZARK EMPIRE FAIRGROUNDS SPRINGFIELD, MO For more information, contact Deb Dickens, Executive Director. Phone: 573/634-3001 Email: MLICA@aol.com Michigan Construction News November 11 – 15, 2016 (Friday to Tuesday) American Association of State Highway & Transportation Officials, 2016 Annual Meeting, Westin Boston Waterfront Hotel, Boston, Massachusetts. Contact: AASHTO, 850/224-7775 AASHTO Annual Meeting 2016 DATES: SATURDAY, NOVEMBER 12, 2016 to TUESDAY, NOVEMBER 15, 2016 American Association of State Highway and Transportation Officials Annual Meeting (AASHTO Annual Meeting) is one of the industry’s most important gatherings of transportation, government and commercial organizations, offering transportation executives the opportunity to network and share the latest in industry policies and innovations. The venue of this event is Westin Boston Waterfront Hotel which is situated in Boston, Massachusetts, USA. AASHTO Annual Meeting 2016 will showcase a wide range of products and services related to transportation sector from the leading exhibitors. Westin Boston Waterfront Hotel 425 Summer Street, Boston, MA 02210 PHONE: 617/532-4600 Be a part of AASHTO 2016 Annual Meeting. For Info on Exhibition Opportunities, contact AASHTO’s Trade Fair Manager David Gerhardt at david@corcexpo.com. Phone: 312/265-9664 AGC (Associated General Contractors) of Minnesota STP CLASSES Supervisory Training Program (STP) classes for November – December will start the week of November 7. For additional information, contact Renee Horsman at rhorsman@agcmn.org. AGC (Associated General Contractors) of Minnesota DATE: WEDNESDAY, NOVEMBER 30, 3016 EVENT: Member Business Meeting/Holiday Reception PLACE: HEARTLAND RESTAURANT, ST. PAUL, MINNESOTA TIME: 5:00 PM to 7:30 PM AGC Contact: Denise Woods at AGC of Minnesota, 525 Park Street, #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 Fax: 651/6328928 Email: info@agcmn.org
tures, including rollover protection and rear view cameras as standard. LiuGong offers a wide range of machines, including wheel loaders, excavators, bulldozers, skid steer loaders, and forklifts.
For more information, visit www.liugongna.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
LiuGong unveiled its new Tier IV Final H-Series wheel loaders and E-Series excavators. The new machines feature cleaner engines, more efficient systems and improvements to the cab that enhance the operator experience. AGC (Associated General Contractors) of Minnesota Once again, we will be collecting for Toys for Tots at the holiday reception. New toys, games, and books, as well as cash and checks, will be greatly appreciated. Checks should be payable to “Toys for Tots.” There will also be cash jars available at the reception. Checks can also be mailed in advance of the reception to Denise Woods at the AGC office. Denise Woods, AGC of Minnesota, 525 Park Street, #110, St. Paul, MN 55102. ASSOCIATED GENERAL CONTRACTORS CONTRACTOR EXECUTIVE EXCHANGE DATES: Sunday, December 4, 2016 to Wednesday, December 7, 2016 LOCATION: Belmond Charleston Place, Charleston, SC We are very excited to invite you to attend the inaugural Contractor Executive Exchange sponsored by AGC of America, December 4 to December 7, 2016 at the Belmond Charleston Place in beautiful Charleston, SC. Over the course of 2.5 days, suppliers will take part in prescheduled one-on-one meetings with the industry’s top general contractors. For more information, please contact: Drew DeSarle; ddesarle@exchangeevents.com; Phone: 440/465-9618; www.exchangeevents.net/GeneralContractorsExchange-2016/ AGC (Associated General Contractors) of Minnesota DATE: TUESDAY, DECEMBER 6, 2016 EVENT: AGC – MnDOT Grading Forum Earle Brown Heritage Center, Brooklyn Center TIME: 8:30 AM to 4:30 PM AGC Contact: Denise Woods at AGC of Minnesota, 525 Park Street, #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 Fax: 651/6328928 Email: info@agcmn.org AGC (Associated General Contractors) of Minnesota AGC – MnDOT Grading Forum On December 6, 2016, AGC and MnDOT will host the annual all-day Transportation Construction and Grading Innovations Technology Forum. This forum offers contractors and MnDOT representatives from around the state an opportunity to hear from industry experts and discuss common current issues. AGC CONTACT: Denise Woods of AGC of Minnesota, 525 Park Street, #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 Fax: 651/632-8928 Email: info@agcmn.org. Concrete Sawing & Drilling Association (CSDA) to Meet in Puerto Rico for the First Time CSDA is heading to beautiful Puerto Rico for the association’s 45th Annual Convention & Tech Fair. Dates: March 14-18, 2017 Puerto Rico is an ideal location for industry professionals to meet, network and relax – a tropical island paradise that remains part of the U.S. and is
easily accessible for American and international travelers. CSDA has chosen the luxurious Gran Melia Resort as the convention venue – a highly sophisticated architectural gem nestled on Puerto Rico’s northeastern coast in Coco Beach, Rio Grande. The CSDA Annual Convention is attended by owners, managers and operators from concrete cutting, polishing and imaging companies as well as representatives from manufacturers and distributors who support the industry with products and services. Anyone who falls into these categories should join CSDA for this important networking event. Registration opens September. For more information, visit www.csda.org/convention, call 727/577-5004 or email info@csda.org. NATIONAL PAVEMENT EXPO 2017 – REGISTER TODAY! DATES: FEBRUARY 1 thru FEBRUARY 4, 2017 PLACE: MUSIC CITY CENTER, NASHVILLE, TN ALL-NEW LEADERSHIP BOOT CAMP – JANUARY 31 Four reasons to attend National Pavement Expo: Packed Exhibit Hall 50+ Conference Sessions lead by construction industry experts covering team development, employment issues, finance, selling, safety, management and training All-New Leadership Boot Camp for owners and employee leaders, presented on Tuesday, January 31. Nashville – from the sights to the sounds, Music City is packed with things to do! Register now and plan your trip to get the best deals on conference sessions, hotels and airfare. For more information, call 920/542-1131 or toll-free at 800/538-5544. National Pavement Expo, AC Business Media, 201 N. Main Street, Fort Atkinson, WI 53538. ASSOCIATED GENERAL CONTRACTORS AGC’s 98th ANNUAL CONVENTION DATES: Tuesday, MARCH 7, 2017 to Thursday, MARCH 9, 2017 LOCATION: Las Vegas, Nevada Cultivate, Innovate, Accelerate – Register Now & Save, Early Registration Deadline: November 30, 2016. Make your plans to attend the 98th Annual AGC Convention and seize your opportunity to cultivate new ideas and partners, see and hear about the latest in construction innovation, and leave with the tools to accelerate your business to the next level. The 2017 Convention features a packed program focused on sharing solutions from experienced contractors and industry experts on key construction issues, networking events structured so you can make valuable new connections, and opportunities to shape the future of the construction industry and the association. The AGC Annual Convention is your best opportunity to enhance your business and advance your career. For more information, contact AGC of America at 703/548-3118; communications@agc.org; www.AGC.org.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 87
Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.
DELIVERING SUCCESS TOGETHER
Contact our distributors and find out how we can help improve your bottom line.
DOZIER CRANE R T- T- HC/CC- AT- B T www.doziercrane.com
ML CRANES & EQUIPMENT R T- T- HC/CC- AT- BT www.mlcranes.com
155 Pine Barren Road Pooler, GA 31322 912-748-2684 Fax: 912-748-5361
VIRGINIA
MARYLAND
160 Kentmere Court Winchester, VA 22603 540-722-3700
4601 Washington Blvd. Baltimore, MD 21227 410-242-6500
BIGGE CRANE AND RIGGING
1345 Mountain Rd. Glen Allen, VA 23060 804-266-0000
DELAWARE
RT- T- HC- CC- AT- B T- T www.bigge.com
4112 Holland Blvd. Chesapeake, VA 23323 757-485-3314
17941 Sussex Highway Bridgeville, DE 19933 302-337-3400
2400 Maury Street Richmond, VA 23224 804-271-9356
8450 Quarry Rd. Manassas, VA 20110 703-393-7344
NORTH CAROLINA
101 Big Crane Lane Aiken, SC 29801 843-834-9103
2025 Cook Drive Salem, VA 24153 540-989-3750
10604 Airline Highway Gonzales, LA 70737 504-421-9774
808 Norton Rd. Wise, VA 24293 276-328-8027
For Your Local Terex Dealer Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes
3908 N. Graham St. Charlotte, NC 28206 877-649-7739
Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.
Page 88 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $115 • Color $165
CLASSIFIEDS Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 23-24 TM
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 22-23 DH
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034 MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 22-23 DH
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 22-23 DH Call McLaren 888-492-4230
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 AERIAL LIFTS
EXCAVATORS
Platform Lifts
Hydraulic Excavators
2013 Genie S-45, Deutz Engine, 4WD, Ready to work! Like new lift, 165 hours............ ..................................$59,900.
2007 JCB JS260, Quick Coupler, Includes 54'' bucket, Good working condition, 3,200 hours ..........................$89,900.
Interstate Equipment Company 706-595-1550
ASPHALT EQUIPMENT Milling Machines 2012 Volvo MT-2000, 610 HP Cummins diesel engine, 86'' Keystone cutter w/ adjustable tool spacing, 4 track, MOBA controls, As-Is condition, 700 hours ........................$240,000.
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 23-24 EB 614-395-4064
1986 Mack RD686SX Triaxle Dump Truck, 283hp, Jake, 6spd, Axles, 20k 20k 58k, 12R24.5 295/75/22.5, 15’ Steel Body, Work Ready Truck Call D’Angelo Bros. Inc. 215-271-7800 23-24 AP
2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000 Albert Medcalf or Marcela Newman 23-24 EB 502-456-4050
1985 Mack RD685SX Triaxle Dump Truck, 237hp, 6spd, Axles, 20k 20k 58k, 12R2405 10:00x15, 15’ Steel Body, Work Ready Truck Call D’Angelo Bros. Inc. 215-271-7800 23-24 AP
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
CMW Equipment 800-283-1336
• Your ad will run for two consecutive issues in 1 region.
Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200
For more information, call Construction Equipment Guide today at
800/523-2200
Mini Excavators 2014 Doosan DX63, Hydraulic quick coupler & one bucket, excellent condition, 250 hours ..........................................Call 440-439-4000 Gibson Machinery, LLC
HYDRAULIC HAMMERS Hydraulic Breakers NEW Promac/Sandvik - All models - All sizes ..........CALL! Promac Group 610-497-3555
ENGINES
LOADERS
Equipment Decals
Backhoe Loaders
REPLACEMENT DECAL SETS for Construction, Forestry, and Industrial Equipment. Safety Decals.
2012 JCB 3CX-14, Cab w/ Heat & AC, Extra dig mech. Quick coupler, 24'' rear, standard front bucket, good condition, 2,812 hrs ............$39,500.
Prompt, Knowledgeable Service. Great Prices. We are The Heavy Equipment Decal Experts. Call 215-536-5339 Email: info@CustomServices Company.com www.QuipCal.com
2011 Komatsu WA250-6, ROPS, JRB Q/C w/ bucket, Cold AC, 6,325 hrs ....$78,900. Interstate Equipment Company 706-595-1550
MATERIAL HANDLERS Material Handlers 2006 Sennebogen 825M C Series, mag box, K13 reach, fair condition, 15,000 hrs ........ ..................................$50,000. 440-439-4000 Gibson Machinery, LLC
PUMPS Water Pumps
EQUIPMENT DECALS
• Cost is $115 per ad, $50 additional for color. Your Ad Will Be Seen By Over 24,273 Construction Equipment Buyers in the Southeast States.
Casey Equipment 224-200-4211
2015 Case 721F, Quick Coupler, Ready to work! Like new, 308 hours ........$169,000.
Casey Equipment 224-200-4211
Wellpoint Equipment Header, swings, grommet or Oring style, self-jetting wellpoints, jet pumps, trash pumps, jet rods, punches, mops. Complete Dewatering. “The finest dewatering pumps and wellpoint equipment since 1923” www.cdpwinc.com 800-800-9562
Wheel Loaders 2013 Hyundai HL760-9, 4.3 Yd bucket, ride control, 23.5 x 25 radial tires, excellent condition, 2,542 hours ..............$119,000. 585-584-3425 George & Swede Sales & Service
Next Issue Closes November 14
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 89
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: BULLDOZER D10T BULLDOZER D10T ENC CAB WITH RIPPER UNDER 3000 HOURS USA ONLY AFTER I HAVE BULLDOZER D11T 2010 WITH UNDER 3000 HOURS I NEED 620,000.00NEG CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: MEDIUM DUTY TRUCK FREIGHTLINER M2 26K GROSS VEHICLE WEIGHT AUTOMATIC TRANSMISSION AIR BRAKES CONTACT: KEVIN MANGANARO (PH: 302 225 7276) EMAIL: KMANGANARO@BAYSHORETRUCKS.COM FAX: 302 652 5358 –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA320-5 CLEAN WORK READY MACHINE WITH 5000 OR LESS HOURS DASH 5 ONLY MACHINE CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: SMALLER ENCLOSED TRAILER NEED A SMALLER ENCLOSED UTILITY/SPORT TRAILER 1000- 1500 LB. CAPACITY TOTAL CONTACT: DIANE LAMBRO (PH: 973-875-7181) EMAIL: DIANE@STANDARDELEVATORCORP.COM FAX: 973-340-8458 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 330BL CAT EXCAVATOR 330BL IF YOU HAVE ANY PLEASE SEND ME PICTURES AND DETAILS. CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM FAX: 96663312326 –––––––––––––––––––––––––––––––– WANTED: CELLULOSE FIBER MANUFACTURER BLOWER COOL MACHINE AND BAGGER AND PLANT CONTACT: GARRY EMAIL: GARRY@ECOFIBRA.NET –––––––––––––––––––––––––––––––– WANTED: DOOR FOR 161 KUBOTA MINI EXCAVATOR NEED COMPLETE DOOR FOR 2008 161 KUBOTA MINI EXCAVATOR. CONTACT: ROBERT (PH: 828-837-8986) EMAIL: TFREALTY@DNET.NET –––––––––––––––––––––––––––––––– WANTED: SNOW WING FOR JOHN DEERE 772G OR 872G MOTORGRADER WE ARE LOOKING FOR A SNOW WING FOR A JOHN DEERE 772G OR 872G MOTORGRADER. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. CONTACT: MARK OR JOHN (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM ––––––––––––––––––––––––––––––––
WANTED: BOMAG BW24R PARTS PLEASE CONTACT ME BY MY EMAIL. WE HAVE A BOMAG BW24R PARTS NEED TO PURCHASE. PLEASE CONTACT ME AS SOON AS POSSIBLE. THANKS. CONTACT: HONGYA (PH: 15901559975) EMAIL: JLW0001@126.COM FAX: 010-69297410 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 I AM LOOKING TO BUY HITACHI EX400 AND EX200 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 595D I AM LOOKING TO BUY JOHN DEERE 595D EXCAVATOR IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– CRANE PARTS FOR ALL TYPES OF CRAWLER CRANES, AMERICAN, TEREX, MANITOWOC, LINK BELT, BUCYRUS ERIE, CONTACT: DAVE ANTONELLI PH: 216-531-8000 EMAIL: ACREQUIPMENT@CS.COM FAX: 216-531-8852 –––––––––––––––––––––––––––––––– WANTED: AIR ASSIST STEERING LOOKING FOR AIR ASSIST STEERING FOR B MODEL MACK OR ANY OTHER TRUCK CONTACT: ROBERT CARTER PH: 610-377-0372 EMAIL: CARTER5586@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED TRUCK 793D CORE FAST. NEEDED TRUCK 793D I NEED 10 AT 12 BUT MUST BE NOT ADVERTISED I NEED TRUCK 793D CORE ONLY CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: LOG SKIDDER JOHN DEERE SKIDDER 340,440,540 MUST BE IN GOOD SHAPE CONTACT: JOHN EMAIL: BLOSSBURGGRANDPA@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: PARTS FLOOR PANELS FOR CAT 922B 94A CONTACT CHRIS 201 370 5170 CONTACT: CHRIS COLABELLA (PH: 201 370 5170) EMAIL: CCOLABELLA@VERIZON.NET FAX: 201 939 9059 ––––––––––––––––––––––––––––––––
WANTED: WANT TRACTOR FARM INTERNATIONAL 1468 LOW HOURS WANT TO BUY TRACTOR FARM INTERNATIONAL 1468 ONLY UNDER 4000 HOURS ORIGINAL I PAY UNDER 4000US CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CAT 953D OR 963D WASTE HANDLER CRAWLER TRACTOR WE ARE LOOKING FOR CAT 953D OR 963D WASTE HANDLER CRAWLER TRACTORS. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. CONTACT: MARK OR JOHN (PH: 1-519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: 24.00-29 TIRES LOOKING FOR 2 24.00-29 TIRES FOR CAT 80 SCRAPER CONTACT: DEAN JOHNSON (PH: 612-759-9491) EMAIL: DEANAJOHNSONINC@GMAIL.COM FAX: 218-945-6511 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER D11T CD «2« BULLDOZER D11T CD «OR CARRIAGE DOZER ONLY« WITH RIPPER UNDER 8000 HOURS FOR BIG JOB NOT ADVERTISED PLEASE ONLY CARRIAGE DOZER 2013AND UP CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CASE 450 CRAWLER COMPLETE STONE GUARDS LOOKING FOR USED SET OF BOTTOM ROCK GUARDS FOR 450 CASE CRAWLER LOADER SER.NO. 3062213 CONTACT: ROGER (PH: 5706393058) EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED: VSI CRUSHER PORTABLE OR STATIONARY BARMAC OR REMCO VSI CONTACT: JOE (PH: 724-944-5569) EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: JENBACHER GAS GENERATOR JENBACHER GAS GENERATOR 1400 KW 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: CAT MOTOR GRADER 140G ORIGINAL PAINT, NO CRACKS OR WELDS, MUST HAVE RIPPER CONTACT: WASIM KHAN (PH: 832-533-1929) EMAIL: MWASIEM@YAHOO.COM ––––––––––––––––––––––––––––––––
WANTED: TO BUY EQUIPMENT MANUALS. WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES). WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: 953C OR SAME SIZE WANTED: USED GENERATORS NEEDED LOADER 953C OR 953D OR USED DIESEL GENERATORS RÉNTAL JOHN DEERE 2010AND UP LOW HOURS TRAILER AND STANDBY USER USER USA CONTACT: FELUX CONTACT: JEAN MAURICE BOUTIN (PH: 786 603 3060) EMAIL: EQUIPSALES2016@GMAIL.COM (PH: 1 450 346 8975 OR 1 514 386 8975) –––––––––––––––––––––––––––––––– EMAIL: WANTED: DYNAPAC ROLLER CA 251D, JEANMAURICEBOUTIN@VIDEOTRON.CA 301D, CA262D, AND CA362D –––––––––––––––––––––––––––––––– CONTACT: RIZ SUNESARA WANTED: BELLY DUMPS (PH: 8325280786) I'M LOOKING FOR ALL MAKES AND EMAIL: RIZ@MEGAEQUIPMENTS.COM SIZES OF BELLY DUMPS ASAP! WE FAX: 8325280786 WILL PAY CASH ON THE SPOT –––––––––––––––––––––––––––––––– WANTED: CAT HYDRAULIC PULL TYPE CONTACT: ROBERT BAKER (PH: 480-744-4008) SCRAPER EMAIL: RBAKER.WESTCOAST@OUTWANTED CAT 463 SCRAPER CONVERTED TO HYDRAULIC LOOK.COM CONTACT: GEHRING GROUP INC FAX: 480-744-4008 (PH: 513-582-3874) –––––––––––––––––––––––––––––––– EMAIL: GEHRINGGROUP@GMAIL.COM WANTED: 4 N 1 LOADER BUCKET –––––––––––––––––––––––––––––––– LOOKING FOR A 4 N 1 LOADER BUCKWANTED: RUNNING OR NON RUNNING ET TO FIT ON A 2007 CASE 570 MXT MACHINES!!!! 1) CAT WHEEL LOADERS: 920, 930,936 CONTACT: RON WILLINGHAM (PH: 5806499524) E/F, 950 B/E/F, 966 C/D/E/F/G/H 970F, EMAIL: WILLINGHAM@SWBELL.NET 972G, 980G. 2) CAT MOTOR GRADER: –––––––––––––––––––––––––––––––– 140G, 14G, 140H AND 14H. 3) CAT WANTED: WANTED HEAVY EQUIPMENT DOZER: D9R, D9N, D10N AND D10R. WITH RIPPER 4) CAT EXCAVATOR: FORKLIFTS BOBCATS SKIP LOADERS 225D, 235 C/D AND 330BL. 5) HITACHI WHEEL LOADERS BOX TRUCKS CONEXCAVATOR: EX200, EX200-1, EX400 STRUCTION EQUIPMENT LANDSCAPAND EX400-1 6) JOHN DEERE EXCAVA- ING EQUIPMENT CHIPPERS ALL TYPES TOR: 595D 7) DYNAPAC ROLLER: OF HEAVY EQUIPMENT LOCATED IN CA251D, CA301D, CA262D AND CA362D CALIFORNIA OR SURROUNDING IF YOU HAVE ANY FOR SALE PLEASE AREAS. PACIFIC EQUIPMENT CO. OR EMAIL ME PICTURES AND DETAILS. GO TO PACIFICEQUIPMENT.ORG CONTACT: RIZ SUNESARA CONTACT: WALTER (PH: 8325280786) (PH: 714-818-4136) EMAIL: RIZ@MEGAEQUIPMENTS.COM EMAIL: PACIFIC-EQUIPMENT@HOTFAX: 8325280786 MAIL.COM –––––––––––––––––––––––––––––––– WANTED: WANTED TO BUY CATERPIL- –––––––––––––––––––––––––––––––– LAR 140G , 140H RUNNING OR NON WANTED: BULLDOZER D8T UNDER RUNNING!!!!!! 3500 HOURS WANTED TO BUY CAT MOTOR GRADER NEED BULLDOZER D8T ENC CAB WITH 140G AND 140H IF YOU HAVE ANY FOR UNDER 3500 HOURS 2012 AND UP WITH SALE PLEASE EMAIL ME PICTURES U BLADES OR SEMI U WITH RIPPER AND DETAILS. WITH EPA NOT ADVERTISED CONTACT: STEVE CONTACT: JEAN MAURICE BOUTIN (PH: 713-659-0593) (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: EMAIL: STEVE@MEGAEQUIPMENTS.COM JEANMAURICEBOUTIN@VIDEOTRON.CA FAX: 281-727-0415 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––
WANTED: MANITOU 2150 MANITOU 2150, UNDER 2005 - 2009, UNDER MAX 3000 HOURS. THANKS CONTACT: CONSTR. EQUIP. BROKER EMAIL: INFO@CEBROKER.ES –––––––––––––––––––––––––––––––– WANTED: WARTSILA HFO WARTSILA HFO ELECTRICAL GENERATOR 5 TO 6 MW. CAN BE ONE OR SEVERAL UNITS ADDING UP TO 8 MW. MUST BE 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 450C JOHN DEERE DOZER WITH BACKHOE 450C OR 550C OR NEWER 6 WAY DOZER WITH BACKHOE ATTACHMENT CONTACT: BUTCH KELLER (PH: 970 749 6920) EMAIL: BUTCHANDKAREN@LIVE.COM –––––––––––––––––––––––––––––––– WANTED: CATALYTIC CONVERTERS. WE BUY COMMERCIAL CATALYTIC CONVERTER'S AND PAY TOP DOLLAR ON THE SPOT. BRANDS WE BUY: DODGE, FORD, CAT, FREIGHTLINER, PETERBILT, KENWORTH, MAC, ETC. WE CAN PAY $50-$175 EACH CONTACT: JOHN FORD PH: 814-779-9208 EMAIL: KCANON.ERS@OUTLOOK.COM FAX: 814-779-9208 –––––––––––––––––––––––––––––––– WANTED: CAT 79U D3 ENGINE LOOKING TO BUY A COMPLETE ENGINE OR BLOCK ONLY FOR A CAT D3 79U ENGINE SERIAL #45V9767 ENGINE ARRANGEMENT #4N169 CONTACT: PATRICK PH: 901-205-8305 EMAIL: PMAN287@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: KENWORTH RIGS ASAP! I AM LOOKING FOR A SINGLE OR FLEET OF KENWORTH RIGS, W900, OR IN THAT SERIES, WITH SLEEPERS, LOW MILEAGE, IN GOOD RUNNING CONDITION. NOTE: PLEASE NO DEALERS I AM A SERIOUS BUYER I WILL BUY ANYWHERE IN THE U.S. CONTACT: JOHN FORD PH: 814-779-9208 EMAIL: KANIN.ERS@OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER KOMATSU 355WITH RIPPERS. NEED BULLDOZER «3« KOMATSU 355 WITH RIPPER ONLY NEAR GEORGIA OR NEW YORK FROM CONTRACTORS ONLY NOT ADVERTISED MUST BE CLEAR PLEASE. CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA ––––––––––––––––––––––––––––––––
Page 90 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Augusta, ME Sat., November 12, 2016 For: Construction Equipment • Wooster, OH Fri., November 18, 2016 For: Rental Fleet Equipment • Attleboro, MA Sat., November 19, 2016 For: Construction Equipment • Woodstock, Ontario November 21 - 22, 2016 For: 2 Day Very Large Agricultural & Construction Equipment Auction • Canastota, NY Sat., November 26, 2016 For: Late Model Rental Fleet • Dallas (Ft. Worth), TX Tues., November 29, 2016 For: RENTALS! Construction Equipment & more • San Angelo, TX Thurs., December 1, 2016 For: Rental Fleet Construction Equipment & more • Boston, MA Fri., December 2, 2016 For: One Owner Liquidation • Youngstown, OH Sat., December 3, 2016 For: Complete Liquidation Construction Equipment, Trucks, Trailers and more • Buffalo, NY Thurs., December 8, 2016 For: Major Job Completion Auction • Marietta, OH Fri., December 9, 2016 For: Late Model Construction Equipment and more
• Wharton, NJ Tues., November 15, 2016 • Orlando, FL Wed., November 16, 2016 • Phoenix, AZ Wed., November 16, 2016 • Tipton, CA Thurs., November 17, 2016 • Pittsburgh, PA Thurs., November 17, 2016
• El Paso, TX Tues., November 22, 2016
• Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction
• Fort Worth, TX Nov. 30 – Dec. 1, 2016 • Williston, ND Fri., December 2, 2016 • Atlanta, GA Tues., December 6, 2016 • Lincoln, NE Tues., December 6, 2016 • Sacramento, CA Tues., December 6, 2016 • Columbus, OH Wed., December 7, 2016
• Wills Point, TX Thurs., November 17, 2016 For: Heavy Equipment & Machinery HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493
• Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural Equipment IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Kissimmee, FL February 13 – 17, 2017 For: Unreserved Public Auction – Leading Equipment Brands
• Minneapolis, MN Wed., December 14, 2016
• ONLINE ONLY November 30, 2016
• Salt Lake City, UT Mon., December 12, 2016
• Orlando, FL February 20 – 24, 2017
• Dallas, TX Fri., December 16, 2016 For: Construction Equipment BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY November 9, 2016 • ONLINE ONLY November 16, 2016
• ONLINE ONLY December 14, 2016 • ONLINE ONLY December 28, 2016 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Buffalo, NY Wed., November 16, 2016 For: Absolute Auction Surplus Liquidation Ontario Specialty Contracting, Inc. • Duncansvile, PA Wed., November 30, 2016 For: Absolute Auction Surplus Liquidation D.C. Ventre & Sons, Inc.
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
• Columbus (Delaware), OH Sat., January 14, 2017 For: Very Late Model Rental Fleet Construction Equipment
• ONLINE ONLY November 30, 2016
• Foley, MN Fri., December 2, 2016 For: Heavy Equipment
• Winter Garden, FL January 28 – February 5, 2017 For: 24th Annual 9-Day Florida Auction
• ONLINE ONLY December 14, 2016
• ONLINE ONLY December 7, 2016
DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., December 3, 2016 For: Construction Equipment
JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Warm Springs, OR November 16 - 17, 2016 For: Sawmill Equipment • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles • Kapolei, HI Wed., December 14, 2016 For: Delta Construction Corporation Public Auction JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200
• Williamsport, PA • Waveland, MS Thurs., December 15, 2016 Oct. 26 – November 9, 2016 For: Complete Liquidation For: One Owner – Susquehanna Supply Co., Inc. Miscellaneous Construction Items & Equipment
• ONLINE ONLY November 23, 2016
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Houston, TX November 9-10, 2016
• Sebring, FL Sat., March 11, 2017 For: Construction & Agricultural Equipment
• Albuquerque, NM Tues., December 13, 2016
• Los Angeles, CA Fri., December 9, 2016
• Midland, TX Fri., November 18, 2016 For: Heavy Equipment & Transportation
• Syracuse, NY Sun., January 8, 2017 For: Light Construction Equipment & more
EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218
• Sebring, FL Sat., January 14, 2017 For: Construction & Agricultural Equipment
• Marietta, PA Fri., December 9, 2016 J.M. WOOD For: Truck, Trailer & Equipment AUCTION COMPANY www.jmwood.com 800-447-7085 HOUSBY AUCTIONS • Montgomery, AL www.housby.com December 1 - 2, 2016 866-218-6266 For: Trucks, Construction & • ONLINE ONLY Forestry Auction November 9, 2016
• Raleigh-Durham, NC Thurs., November 8, 2016
• Manassas, VA Fri., December 16, 2016 For: Late Model Construction Equipment & more
• Long Island, NY Sat., January 7, 2017 For: Late Model Construction Equipment & more
DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540
BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227
• Albany (Greenwich), NY Fri., December 30, 2016 For: Final Auction of Year – Late Model Construction Equipment
To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Las Vegas, NV Fri., November 18, 2016
• Las Vegas, NV Sat., December 10, 2016 For: Large Job Completion & Rental Returns
• Atlantic City, NJ Sat., December 17, 2016 For: Rental Equipment
Coming Auctions
• Foley, MN Fri., March 3, 2017 For: Heavy Equipment
• Brooklyn, MS November 11 - 12, 2016 For: Construction & Farm Equipment, Heavy Trucks & more MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888
INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225
• Greenville, SC Sat., November 19, 2016 For: One Owner Absolute Retirement Auction
• Sebring, FL Sat., November 12, 2016 For: Construction & Agricultural Equipment
• Panama City, FL Wed., December 7, 2016 For: Absolute Auction – Triangle Asphalt, Inc.
• Princeton, WV Thurs., December 15, 2016 For: Absolute Auction – Trucks, Trailer, Construction Equipment McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., December 13, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., January 10, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., February 14, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., March 14, 2017 For: Tractor, Farm & Construction Equipment • Great Mills, MD March 24 - 25, 2017 For: Tractor, Farm & Construction Equipment PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., November 10, 2016 For: Construction Equipment • ONLINE ONLY Thurs., November 10, 2016 For: Special Construction Services Retirement Auction • ONLINE ONLY Thurs., November 17, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., December 1, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., December 1, 2016 For: Construction Equipment
RTI AUCTIONS www.teitsworth.com 585-243-1563 • Binghamton, NY Wed., November 16, 2016 For: The Fahs Group – Bridge Division Equipment Auction SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Boonsboro, MD Fri., November 18, 2016 For: Construction & Farm Equipment Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY November 2 - 9, 2016 For: Ag, Construction, Trucks & more • Gilmore City, IA Tues., November 29, 2016 For: Large Farm & Construction Equipment Auction • West Fargo, ND Wed., November 30, 2016 For: Aglron West Fargo Event • ONLINE ONLY December 7 - 14, 2016 For: December Online Auction – Upper Midwest Locations • Larchwood, IA Tues., December 20, 2016 For: Aglron Sioux Falls Event • Litchfield, MN Thurs., December 22, 2016 For: Aglron Litchfield Event UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., December 16, 2016 For: Construction, Utility & Forestry Equipment
• ONLINE ONLY Thurs., December 8, 2016 For: Construction Equipment
WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700
QUAKER CITY AUCTIONEERS INC. www.quakercityauction.com 215-426-5300
• Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction
• Old Bethpage, NY Sat., November 12, 2016 For: Construction & Roadway Equipment, Trucks & Trailers
WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., December 3, 2016 For: Construction Equipment • Lebanon, TN Sat., March 11, 2017 For: Construction Equipment ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., November 9, 2016 For: Construction Equipment
• Phoenix, AZ Sat., November 12, 2016 For: Live Public Auction • Phoenix, AZ Sat., December 10, 2016 For: Live Public Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Darlington, PA Thurs., November 17, 2016 For: Construction Equipment • Kissimmee, FL February 6 – 11, 2017 For: 43rd Annual Consignment Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 91
Consignments Welcome!
Saturday, November 12, 2016 2017 Auctions January 14 March 11
May 13 July 15
September 9 November 11
863-386-1225 www.insightauction.com State Road 66 • Sebring, Florida
FL. LIC.#AB1898-AU2567
Page 92 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Hosts Auction in Kissimmee, Fla.
A
lex Lyon & Son held an auction in Kissimmee, Fla., on Oct. 28. A wide variety of equipment was available from a number of manufacturers, including Kobelco, Hitachi, Komatsu, Doosan, Cat, Hamm, Genie and many more. For more information, visit www.lyonauction.com. (This story also can be
found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Mark Yarbrough, Intrac Corporation, Plant City, Fla., tests this Kobelco excavator SK210.
The Alex Lyon & Son auction in Kissimmee, Fla., featured a variety of equipment, including a line of excavators.
John and Monica Quintero, Quinlon Investments in Doral, Fla., inspect this Kobelco SK 350.
Chase (L) and Colin Kelley consider several machines, including this Lull 1044C54 Series II.
Wes Leighton, Leighton Garage & Leighton Excavator Co., Waterboro, Maine, shops the selection of buckets and attachments on display.
Katherine Rodriguez and Vincent Gomez of American Recycling in Tampa, Fla., test operate the Komatsu PC 200 HD.
Kevin Skoglund (L), St. Pete, Fla., and Shaun Dunning, United Kingdom, both of MT Shipping, look at this Cat 320.
Roger McHugh, Brookside Equipment Sales, Phillipston, Mass., inspects this IHI 65NX excavator.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 93
HUGE 2-DAY PUBLIC AUCTION
TRUCKS, CONSTRUCTION & FORESTRY AUCTION
Selling All Types of Construction Equip., Heavy-duty Trucks, Trailers, Farm Tractors, Logging Equip., Support Equip., Vehicles & More
Wednesday, Nov. 16th & Thursday, Nov. 17th • 9am
2 DAY AUCTION: DECEMBER 1-2, 2016 MONTGOMERY, AL, USA (3) 2011 JOHN DEERE 290G LC
1042 Holland Ave • Philadelphia, Mississippi 39350
Phone: 601.656.9768 • Fax: 601.656.0192 10% Buyers Fee on the first $4500 of each lot and then a 1% Buyer Fee on the remaining balance of each lot.
Consignments are Now Being Accepted for this HUGE 2-Day Auction. CALL TODAY !!
(2) DEERE 240DL
(4) CAT 12H
2013 John Deere 75D
(8) CPS BELLY DUMPS
(9) CAT D6NLGP
2001 CATERPILLAR D6M LGP
2003 HYSTER H300HD
2006 CATERPILLAR 324DL
2008 CATERPILLAR 420E
2008 CATERPILLAR 725
2008 JOHN DEERE 672D
2013 VOLVO EC220DL
2013 VOLVO EC250DL
2015 MACK PINNACLE CHU613
2015 TAKEUCHI TL10
CAT 345DL
CATERPILLAR 980G II, 6300 HRS
(3 of 5) ‘16 Hyundai 160D-7A (Flood Damaged)
2013 Cat D5K2 LGP
Selling on Day 1 ? ')0 " !'3*+2 '<1+ 9257 ? +8+6(/18 !6/ '<1+ 9257 ? +8+6(/18 !6/ '<1+ 925 ? ')0 # !'3*+2 '<1+ 925 ? 38@1 !'3*+2 '<1+ 9257 ? ')0 " !69)0 !6')8467 ? ')0 " !69)0 !6')8467 ? +8+6(/18 !69)0 !6')8467 ? ')0 " !69)0 !6')8467 ? +8+6(/18 !69)0 !6')8467 ? 6+/-.81/3+6 4643'*4 !60 !6)867 ? ')0 " !69)0 !6')8467 ? +8+6(/18 !69)0 !6')8467 ? +8+6(/18 !69)0 !6')846 ? 6+/-.81/3+6 ! 9)0+8 !69)0 ? #41:4 # #'3 (4*= !69)0 ? % 5+) % 843 4;(4= ? 6/-.8 445 #/0/3- 49(1+ 645 !616 ? !6'37)6',8 ! @ 8+5 +)0 !616 4.3 ++6+ $ !6')846 4.3 ++6+ !6')846 ? 9(48' % $ !6')8467 9(48' ! $ !6')846 ',* !''%)# *) 1 1-, (%)2.0 &'(%*&0 0 -3&/0 11$%'+&,10 (0%
(6) DEERE 9520 WDEERE 1812VC Selling on Day 2 ? '8 4>+6 0 , "" ? '8 % 4>+6 0 , ? 4.3 ++6+ 4>+6 0 , ? ++6+ 4>+6 0 , ? 4.3 ++6+ ! 4>+6 0 , 42'879 % 4>+6 0 , ? '8 <)':'846 0 , 42'879 <)':'846 ? 4.3 ++6+ <)':'846 0 , ?
/30(+18
?
4(+1)4
? ? ?
4()'8 !'0+9)./ ! 4.3 ++6+
<)':'846 0 ,
?
++6+
? ?
'8 0/* 8++6 0 , # 4()'8 ! 0/* 8++6 0 ,
?
+.1 !
? ? ?
# ! 46+786= 91).+6 '8 46+786= 91).+6 4.3 ++6+ /3/ <) 0 ,
? ?
'8 /3/ <) 0 , ! /8')./ &% " /3/ <) 0 ,
<)':'846 0 , <)':'846 0 , <) 0 , 6'*+6 0 ,
++6+ $ !6')846 ; +=341*7 )6'5+67 '8 $.++1 4'*+6 0 , ? '8 $.++1 4'*+6 0 , ?
42'879 $ $.++1 4'*+6 0, ? 42'879 $ 4'*+6 0 , ? '8 $ <8@.4+ 0 , ? #41:4 $ ')0.4+ 0 ,
(2) 2013 Mack GU713
$
')0.4+ 0 ,
0/* 8++6 0 ,
3-+67411 '3* # $ 4601/,8 =*64 < +11+6 93).+6
?
'** 3
( #! -!(, !''%)# ,*'.-! 1.) % *+&'%"-, 3 *%,- %"-+. & *+&'%"3 *1**+&'%"*.- *-$!+ ,%2!, *" *1*- *+&'%"-, 3 * &% -!!+, 3 . *%)% 0 / -*+, 3 !+!0 %)% 0 / -*+, ',* %)% &$*!, +!) $!+, )'%"-,
This is only a partial list of highlighted items for the huge 2-day auction. Check our website for a full listing. www.deancoauction.com
2012 Cat 420E 4WD Extendahoe
(3 of 5) 2014 Peterbilt 389
Phone: 601.656.9768
Fax: 601.656-0192
1042 Holland Ave (PO Box 1248) • Philadelphia, MS 39350 Philadelphia, MS 39350
Auctioneers: Donnie W. Dean, MS Lic. 733 & Wes Dean, MS Lic. 1322
bid live ONLINE
TL230
ZX450
Page 94 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Euro Auctions Boasts Variety of Equipment at Newnan Sale
E
uro Auctions U.S.A. conducted an absolute auction at its permanent facility in the Atlanta suburbs of Newnan, Ga., on Oct. 26. A variety of construction equipment was on the block, including several unused machines and a terrific lineup of miniexcavators and miscellaneous items. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG Matt Hostetter (L) and Fiona Doherty, Euro Auctions, scan the crowd for a final bid on a compressor. (L-R): Brett Johnson, Vertical Earth, Cumming, Ga., and Randy North and Jeff Bullock, both of JB Earthmoving Equipment, Atlanta, Ga., discuss equipment on the auction block.
Herbert Hare, Hare Tractor, Cullman, Ala., checks the engine of a Komatsu PC78mr mini-excavator.
Attendees shop the selection of buckets.
Scotty Garmon of SG Paving Contractors, Ball Ground, Ga., tests this Cat CB22 asphalt compactor.
Louie Sansalone (L) and Oscar Mueller, both of Louie Sand & Gravel, Lithonia, Ga., test the JLG 450AJ Series 2 manlift.
Skip Walker (L) of Hill Hills Equipment, Ellijay, Ga., and Derek Keys of Euro Auctions talk about items about to go on the auction block.
Terry Barksdale (L) of Mobile, Ala., and Gaston Pace, Pace Truck & Equipment, Perkinston, Miss., attend the sale.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 95
Page 96 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Joey Martin Hosts Liquidation Auction in Blairsville, Ga.
J
oey Martin Auctioneers held a successful onsite auction in Blairsville, Ga., on Oct. 22. The liquidation auction was held for a contractor looking to downsize after completing a project. In addition to construction equipment, this sale featured an array of farm tractors, farm equipment, trucks, trailers, support equipment and hundreds of new, unused skid steer attachments, ATVs, tools and other support pieces. More than 300 registered bidders attended the sale. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
This 1975 Corvette Stingray garnered a lot of attention from the crowd.
Ed Hawkins (L) and Terry Callihan of Chattahoochee Construction, Blue Ridge, Ga., show interest in this late-model Cat 308E2 CR with only 1,200 hours. (L-R) are Greg Cochran, Farm Fencing, Blue Ridge, Ga.; David Allen, Allen Logging, Blue Ridge, Ga.; Gary Cochran, Farm Fencing; and J.E. Cochran, Fannin County Mule Company, Blue Ridge, Ga. Leroy Dishman (L) and Randy Saxon of D&A Enterprises, Dewy Rose, Ga., inspect this Takeuchi compact track loader.
Blake Chastain (L) and Colton Stroud of WRC Masonry, Hiawassee, Ga., test this Kubota KX080-3 mini-excavator. Joey Martin Auctioneers held a successful onsite auction in Blairsville, Ga., on Oct. 22.
Joey Martin calls for one last bid before he drops the gavel on another piece of heavy equipment.
(L-R): Jeremy Adams and Gary Edwards, both of Stadco Development, Blairsville, Ga., and Bill Donaldson, Coldicz Paving, Blairsville, Ga., talk about construction and paving machines.
Toby and Kim Adams of Adams Equipment, Buchannan, Ga., look over some of the mini-excavators about to go on the auction block.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 97
Page 98 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AED SUMMIT/CONDEX ............................................................................29 ALLU GROUP ............................................................................................43 ASC CONSTRUCTION EQUIPMENT USA ..............................................2,3 ATI CORPORTATION/LEVEL-BEST ..........................................................38 BANDIT INDUSTRIES INC ........................................................................61 BARGAINS ................................................................................................88 BRANDYWINE TRUCKS & EQUIPMENT..................................................10 BROOKS SALES INC ................................................................................25 BUTLER MACHINERY ..............................................................................26 CAROLINA CAT ....................................................................................14-17 CEG SCALE MODELS ..............................................................................84 CLASSIFIEDS ............................................................................................88 CLEARSPAN FABRIC STRUCTURES ......................................................29 COMPANY WRENCH ................................................................................19 CON-EQUIPMENT OF THE CAROLINAS ................................................10 CONEXPO..................................................................................................21 CONSTRUCTION EQUIPMENT GUIDE TRAILER PROMO ............................................................................52 CONEX/CONAGG PAPER................................................................35 WANTED ..........................................................................................89 CONEX/CONAGG MAGAZINE ........................................................44 FL AUCTION PROMO ......................................................................97 DEANCO AUCTION & SALES CO INC PHILADELPHIA MS ..........................................................................93 DOOSAN INFRACORE AMERICA ............................................................69 DOOSAN PORTABLE POWER..................................................................81 DRESSTA MACHINERY ............................................................................27 DYNAPAC ..................................................................................................72 FAE USA INC ............................................................................................25 FECON ......................................................................................................58 FELLING TRAILERS ..................................................................................49 FLANGE LOCK ..........................................................................................34 FLECO ATTACHMENTS ............................................................................42 FLINT EQUIPMENT COMPANY ................................................................13 G S EQUIPMENT INC..................................................................................9 GEHL ..........................................................................................................66 GRINDERCRUSHERSCREEN.COM ........................................................58 GROVE WORLDWIDE ..............................................................................65 HILLS MACHINERY COMPANY ..............................................................100 HOLLAND PUMP MFG ..............................................................................26 INSIGHT AUCTIONS..................................................................................91 INTERSTATE EQUIPMENT CO ................................................................25 IROCK CRUSHERS ..................................................................................62 IRONHORSE EQUIPMENT INC ................................................................20 IRONPLANET KISSIMMEE FL ................................................................................95
JM WOOD AUCTION MONTGOMERY AL ..........................................................................93 JOHN DEERE ............................................................................................85 KAWASAKI - KCM ................................................................................82,83 KLEEMAN ..................................................................................................63 KOBELCO ..................................................................................................79 KOMATSU AMERICA CORP............................................................67,74,75 KPI-JCI ......................................................................................................54 KUBOTA ................................................................................................70,71 LAND EQUIPMENT INC ............................................................................26 LAWRENCE EQUIPMENT ........................................................................99 LINK-BELT EXCAVATORS ....................................................................50,51 MAY HEAVY EQUIPMENT ..........................................................................5 MOBRO MARINE INC................................................................................39 NEXTRAN OF JACKSONVILLE ................................................................47 NORAM ................................................................................................76,77 NORTH AMERICAN ATTACHMENTS........................................................38 PERKINS ENGINES COMPANY LTD ........................................................23 POWER EQUIPMENT CO..........................................................................11 POWERSCREEN MID-ATLANTIC ............................................................55 RANSOME EQUIPMENT SALES LLC/LRH ..............................................89 ROAD BUILDERS MACHINERY................................................................42 SANDVIK MINING & CONSTRUCTION ....................................................43 SANY AMERICA INC..................................................................................73 SCREEN MACHINE INDUSTRIES INC ....................................................57 SENNEBOGEN ..........................................................................................59 SOLESBEES EQUIP & ATTACHMENTS ..................................................40 STERETT HEAVY HAULING ....................................................................20 TEREX CRANES........................................................................................87 THOMPSON MACHINERY USED PARTS ................................................38 TOWMASTER INC ....................................................................................47 TRAMAC CORP ........................................................................................34 TRENCH SHORING SERVICES................................................................33 VIRNIG ATTACHMENTS ............................................................................41 VOLVO ......................................................................................................6,7 WILCOX TRACTOR SALES INC ..............................................................29 WORLD OF CONCRETE ..........................................................................33 YOUNG CORP ..........................................................................................40 ALABAMA SUPPLEMENT COWIN EQUIPMENT CO INC ....................................................................3 HEAVY MACHINES INC ..............................................................................7 JCB OF ALABAMA ......................................................................................2 THOMPSON TRACTOR CO ....................................................................4,5 TRACTOR & EQUIPMENT CO INC ............................................................8
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 9, 2016 • Page 99
Page 100 • November 9, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CASE 921F WHEEL LOADER MORE TONS PER TANK. CASE F Series wheel loaders have what it takes to get more done with less. Powerful engines with SCR technology deliver maximum performance while maintaining lower temperatures and improving fuel economy by as much as 20%. See how our efficiency helps your operation at CaseCE.com/FSeries.
Call Today for a Demo. OPERATING WEIGHT: 43,777 lb | 19,857 kg ENGINE POWER: 225 HP | 168 kW
www.hillsmachinery.com
Quality Used Equipment from Hills Machinery SPECIAL RESIDUAL LEASE PROGRAM ON TEREX | FINLAY SCREENS
SPECIAL FAIR MARKET VALUE LEASE PROGRAM ON BELL ARTICULATED TRUCKS**
2014 B30E’s
2015 B30E’s
As Low As $2,700 Per Month
As Low As $5,200 Per Month
CASE TR320 COMPACT TRACK LOADERS 3 UNITS AVAILABLE W/OROPS, ELECTRIC/HYDRAULIC CONTROLS, BUCKET W/BOE
2013, CT2590, 1142 HRS ..............................$31,326 **Rate based on 1500 hours per year operation with satisfactory credit approval by 2013, CT2861, 801 HRS ................................$31,740 lessor. Hours shown are subject to change. 2014, CT2289, 946 HRS ................................$32,560
2014 MODEL 684
2014 MODEL 883
As Low As $3,845 Per Month
As Low As $4,873 Per Month
2015 MODEL 863
2015 MODEL 883
As Low As $3,712 Per Month
As Low As $4,952 Per Month
North Carolina Greenville 415 Belvoir Hwy Greenville, NC 27834 Phone 252-752-7145
PEN!
NOW O
Greensboro 2901 Manufacturers Rd.. Greensboro, NC 27406 Phone 336-308-3045
2015 CASE CX210C CRAWLER EXCAVATOR, 1082 HRS, 9’8” ARM, 31.5” STEEL SHOES, HYDRAULIC THUMB, 42” BUCKET, TELEMATICS, MAINTENANCE PLAN .............. ..........................$159,900 OR RENT
2013 MERLO P38.13 TELESCOPIC HANDLER, 1417 HRS, 8,400 LB 42 FT LIFT, 4 WHEEL DRIVE AND STEER, QUICK ATTACH CARRIAGE W/ 48” FORKS, DELUXE CLOSED CAB ....................$26,700 OR RENT
PEN!
South Carolina Raleigh 1501 Hedingham Blvd. Raleigh, NC 27604 Phone 919-746-7938
Charlotte 11717 Reames Road Charlotte, NC 28269 Phone 704-208-5564
Columbia 1014 Atlas Way Columbia, SC 29209 Phone 803-658-0200
2014 CASE 921F WHEEL LOADER, 2192 HRS, CAB, A/C, HD AXLES, 23.5R25 RADIALS, 4.75 CY BUCKET W/ BOE, CAMERA, RIDE CONTROL ................$167,200 OR RENT
Charleston 7168B Cross County Road North Charleston, SC 29418 Phone 843-225-9377
NOW O
Greenville 11 Dixie Circle Greenville, SC 29605 Phone 864-546-5208
www.hillsmachinery.com