Issue
623 October/ November
Industry UK
0121 711 2761 www.bpiuk.co.uk
3D Printing & Design Service can be made in a range of polymers including ABS and polypropylene as well as specialist anti static conductive and EMI shielding plastics.
Analytix
see them on page....................6
TBA Protective Solutions 3D printing service allows cost-effective prototype development as well as small lot product production. Ideal for tool production capable of up to 100 parts, the 3D printed tools
Istorage
see them on page....................7
Working with the customer, TBA offers a full design service and will advise the customer on the best design for his application. Once approved, TBA will 3D print the design enabling the customer to trial his prototype product prior to committing to expensive metal tooling.
plastics which offers the customer the opportunity to produce low cost, small runs, negating the use of expensive traditional tooling which also demands high minimum run quantities. TBA’s anti static or EMI shielding paints may also be used
Supertouch – Celebrating 20 years in the PPE and workwear industry The National Distribution Centre (NDC), located in Rabone Park, Smethwick has over 60,000sq ft of distribution space, and employs over 75 members of staff. The site will become the official headquarter of Supertouch in October of this year.
intermittent activity which may be dormant during any site visit, and provide a greater level of confidence in your critical distribution equipment. It can also be of benefit in excessively noisy environments as these devices, designed for permanent or semipermanent installation are able to better cope with, and discriminate between genuine internal discharge and external background interference with greater accuracy.
Spanner
see them on page....................8
G Force
see them on page................. 11
BTM Automation
see them on page................. 23
Compact & Bale
see them on page................. 26
An annual Location survey or ‘spot check’ for Partial Discharge (PD) while in service and under normal operating conditions is recognised as a cost effective method to assess the ongoing health of your HV Switchgear, with the financial savings from avoiding a single outage easily offset by the OPEX spend, not to mention other regulatory incentives. Given the relatively short measurement window a regular period of Continuous Monitoring can identify
Environmental Factors To roll-out a network wide inspection program, a period of 7 days per site is often sufficient to confirm the presence of erratic activity, itself often dependent on environmental factors such as Temperature, Humidity and Voltage variations as a result of changes in the Loading. Frequently, PD will begin life in this way before the inevitable insulation deterioration increases its severity, and ability to remain active for longer periods eventually manifesting into an avoidable incident. T +44 (0)151 3394181 www.eatechnology.com
TBA Protective Solutions specialise in products for the electronics, defence, aerospace and ATEX handling industries. With a wealth of experience in EMI Shielding, Anti Static Conductive and ATEX compliant materials TBA can offer the complete solution to your problem. Gail Campbell Sales & Marketing Manager, T +44 (0)1706 647718 info@tbaps.com www.tbaps.com
Boxes, enclosures, or indeed any other plastic part can be 3D printed in standard, anti static or EMI Shielding
Intermittent Partial Discharge demands a different philosophy
should the customer want to coat the inside of his enclosure.
Supertouch sells a complete range of PPE and Workwear from high-vis to flame-retardant clothing across a number of industries including: construction, pharmaceuticals, rail and manufacturing. Mr Akhtar still has an active role in the business as Chairman, together with his two sons who are part of the senior management team, led by Managing Director Sarah Bridge. Entering into its 20th year Supertouch, the Personal Protective Equipment (PPE) and Workwear specialist, is marking its birthday with the opening of a new head office at its distribution centre in Smethwick.
Supertouch is now one of the largest manufacturers and suppliers of PPE and Workwear in the UK, renowned for the quality of its products. The business has recently been identified as one of London Stock Exchange’s 1,000 Companies to Inspire Britain.
Founded in 1996 by Parvez Akhtar and his family, the firm was originally based in Brentwood, Essex but made the strategic decision to relocate the entire business to the Midlands, to help support its continued growth and expansion.
To find out more about Supertouch, please visit T 0345 130 9922 sales@supertouch.com www.supertouch.com
UK’s most popular Biomass CHP
Contact: Spanner Re2 GmbH Niederfeldstr. 38 84088 Neufahrn, Germany
Matthias von Senfft +49 8773 7079 8164 matthias.vonsenfft@holz-kraft.de
www.holz-kraft.de/en
Search for us on Facebook
and follow us on Twitter
@best_pra_uk
Contents
Industry UK
Commitment to Excellence....................................................................................................... 2 Industrial Excellence................................................................................................................. 3 Vacuum Solutions News............................................................................................................. 4 Industrial Excellence.................................................................................................................. 5 Laboratory & Technology News............................................................................................... 6 Production Innovation Award.................................................................................................. 7 Commitment to Excellence....................................................................................................8-9 Forklift Truck News.......................................................................................................................10 Autoclaves News...................................................................................................................... 11 Pumps & Valves News...................................................................................................................12 Bearings and Lubrication News.............................................................................................. 13 Process & Control News.......................................................................................................... 14 Measurement & Inspection News.......................................................................................... 15 Hygiene News........................................................................................................................... 16 Odour Control News................................................................................................................ 17 Liquid Packaging News........................................................................................................... 18 Industrial News...................................................................................................................19-20 Facilities Management News.................................................................................................. 21 Control Automation Systems News....................................................................................... 22 Industrial News........................................................................................................................ 23 Disinfection Solutions News................................................................................................... 24 Smart Access Solutions News................................................................................................. 25 Industrial News...................................................................................................................26-28 Safety Switches News.............................................................................................................. 29 Industrial Classifieds...........................................................................................................30-31 Offshore Engineering News............................................................................................................................. 32
Editor’s Comments Hello & welcome to Issue 623 of Best Practice UK… As with every edition, the team at Best Practice UK has been working extremely hard to bring you an issue that is full of innovative and exhilarating companies, and we believe that this could be the best issue yet! We have searched the length and breadth of the UK to bring you some of the most ground-breaking innovations and this month we are overjoyed to be highlighting the activities of Matse and Shell-Clad. Firstly, we would like to focus on the accomplishments of Union Industries. Due to their prominence in the industry; we have awarded them with the impressive ‘Industrial Excellence’ Award feature. To find out more, turn to page 3. And secondly, we are featuring Master-Lock with a selected feature following the launch of their new safety kits. For more information look no further than Page 23. I hope you enjoy reading this issue of Best Practice UK as much as we have enjoyed bringing it to you. Happy reading and we hope to see you for the next edition!
Kirsty Jo Quigley Editor For all advertising and sales enquiries, please contact Dave Priestley – Sales Manager 0121 711 2762 Published by Best Practice Midlands Ltd 0121 711 2761
Follow us: @best_pra_uk www.facebook.com/pages/BestPractice-Industry-UK/333514586751225
Commitment to Excellence
Your perfect climate Best Practice is keen to inform its readers that Munters has been selected as a company most deserving of its prestigious Commitment to Excellence profile. In 1955 the organisation’s founder, Carl Munters, set out to achieve a certain goal: to create ‘the perfect climate’ with the formation of an enterprise focused on the provision of effective and energy efficient air treatment solutions. In the six decades that followed significant levels of growth and success ensued, enabling Munters to become an industry leader recognised across the world for its specialist capabilities. Facilitating the needs of customers in an impressive 30 countries, the dedicated solutions provider has essentially been striving to enhance the future of our climate whilst defining environmental impacts over the generations. Its hard-working and driven team, which comprises more than 3,000 employees, has the knowledge and experience needed to ably assist clients working within various sectors (the pharmaceutical, food, electronics, preservation, utility and construction markets included). The sales and manufacturing services available are wholly supported by the winning combination of state-of-the-art technologies and the competence of seasoned engineering experts. The company has been separated into four key business areas. The first focuses on industrial process and comfort climate application solutions as the dedicated air treatment division, whilst the second, AgHort, remains centred on the optimisation of indoor climates for the purpose of plant cultivation and livestock breeding. HumiCool, meanwhile, is a mobile system made for commercial buildings and industry, and Mist Elimination is the final strand, which also aims to assist those working amidst the industrial marketplace. The scope of its activities and proficiencies has led to Munters becoming an international frontrunner in the field of cost-effective air treatment and dehumidification. Its exceptional suite of solutions has been recognised by many for their usefulness, particularly in relation to the results achieved for energy performance, comfort, quality and customer productivity.
innovations is its award-winning desiccant dehumidifier IceDry™, which has proven invaluable in a number of environments. Strategically developed for usage in cold stores, this intelligent system can effectively resolve commonly occurring problems triggered by the arrival of ice, frost, snow and condensation, and so has been a popular purchase for organisations of different natures. Another exciting addition is the Oasis™ IEC Indirect Evaporative Cooler, which is utilised for data centre cooling. This product, which is widely considered a superior alternative to the more typically employed free cooling techniques, works to eliminate contamination from mixed air streams. This, along with the ability to provide an impressively low PUE, makes the Oasis™ IEC the most favourable option for cooling data centre facilities. Close control systems like the MX2 Plus, MDU and ML Plus are acknowledged for focusing on humidity and temperature control. The units are capable of delivering between 180m3/hr to 100,000 m3/hr of air and are ideally suited to sensitive food, chemical and pharmaceutical processes and preservation applications due to their ability to create an optimal climate throughout the year. Please get in touch with Munters today if you wish to make an enquiry or find out more about any of the products available. The website provided will enable you to access a wide range of resources - case studies, apps, videos and guides – should you require further information, insight or guidance. T +44 (0)1480 432243 dryair@munters.co.uk www.munters.co.uk
One of the company’s most significant
2
Spanner Re2 sponsors this issue of
Industry UK
see them on page 8
0121 711 2761 Printed by Iliffe Newspapers
Industrial Excellence
Union secure repeat orders from Lidl
trucks. The new Union rapid roll doors will drastically reduce the downtime that Lidl experienced with the previous doors, which was caused by excessive lead times for parts and repair.
Union Industries, the Great British manufacturer, has been working overtime to complete a series of installations for the German discounter, Lidl UK, which will help transform operations at one of the grocer’s largest multitemperature warehouses. Lidl, a long-standing client of Union Industries, has invested in four new high speed doors for its Kent-based site that will facilitate significant efficiency gains. Three Ramdoors and one Bulldoor have been used to replace four existing doors at the warehouse which were supplied by one of Union’s competitors when the distribution centre was built in 2014. The original doors frequently required costly new parts, mainly as a result of impact damage by forklift & ride-on ped
Union Industries’ doors have an excellent reputation in retail distribution for very high traffic use openings between various temperature controlled zones. The robust construction of the doors, coupled with Union’s ability to deliver exceptional after-sales service has been key to its success in securing contracts with multinational companies such as Lidl. Stacy Copley, Head of Logistics for Lidl UK in Northfleet, said: “We previously had to pay for regular call-outs, repairs, parts and maintenance of the doors we used, but since we invested in Union’s high quality doors with their brilliant warranty scheme, these problems have gone away.” Contact T +44 (0)113 2448393 www.unionindustries.co.uk
There is an Easier Way… and printed films (flexographic print, HD flexo, gravure print and digital print), whilst its services include stock/quality management, technical support and customer design development. Boasting status as the UK’s largest distributor of polypropylene, laminates and special films, National Flexible is an established organisation that has been trading for over 50 years. The company, which operates from its modern, purpose-built facility in Bradford, was officially founded in 1993 within the Charles Baynes Group. Holding the most expansive independent BOPP film conversion facility in the country enables National Flexible to efficiently supply products of the highest calibre compliant with the most up-to-date BRC and ISO standards for food-grade packaging films. Its specialist activities cover plain films (polypropylene, laminates, environmental films and specialist barrier films)
“All of our films are supplied ex stock from a supplier base that includes Europe, the Middle East and China,” explained George Slack, Managing Director at National Flexible. “It is our extensive supply network that enables us to source films worldwide, which we provide to customers for the purpose of price, pack and print performance improvement.” Facilitating the needs of a large cross-section of clients is made possible due to the wide range of applications reel format film can be applied to (such as flow-wrap, VFFS, tray-sealing, thermoform, box wrap, and sachet applications). T 01274 685 566 www.nationalflexible.co.uk
New website puts Ballyclare capabilities in the spotlight Digital visitors to Ballyclare Limited will now find a new website – www.ballyclarelimited. com - which reflects the company’s wide range of products and services. Among the enhancements to the site are a streamlined approach to navigating the various ranges of high quality protective clothing and specialist workwear which the company provides, plus an increased emphasis on the ecommerce facilities that are available to customers wishing to purchase online. “We aim to give visitors a very clear picture of the scope of our offering from the minute they land on the home page,” comments Ballyclare Managing Director, Carlton Greener. “They can immediately see we serve different sectors such as the fire, ambulance, rail and general workwear markets, and no matter whether they need ambulance uniforms, firefighter suits, Gore-Tex® clothing or hi vis waterproof workwear, we’ll have just what they are looking for.” Although Ballyclare is a major supplier of workwear and protective clothing to many
Analytix sponsors this issue of
Industry UK
major organisations such as Network Rail and Toyota, the company’s new site also offers a reliable and competitive ecommerce facility. “The site has been designed to allow customers to find the type of garment they are interested in both quickly and easily. They can choose anything from general workwear, jackets and trousers through to flame retardant coveralls, high visibility workwear and protective clothing, and place an order there and then. The site is also fully compatible with mobile devices, so customers can place orders wherever and whenever they wish.” Visitors to the new website can also find details about Ballyclare’s workwear services. These include personalisation with logo and corporate identification, a service that covers cleaning, inspection, repair and delivery, and a managed service option.
with a comprehensive range of industrial workwear, corporate garments, high visibility and waterproof/foul weather garments for over twenty years. In addition, Ballyclare Limited is a trusted supplier of specialist protective clothing to the emergency services and armed forces, and provides managed services which include garment supply, leasing, repair and laundering.
Ballyclare Limited is a designer, manufacturer and distributor of protective workwear clothing and has been supplying customers
T +44 (0)844 4932808 info@ballyclarelimited.com www.ballyclarelimited.com
see them on page 6
3
Vacuum Solutions News Consistent further development of Mink claw vacuum technology Busch has continued to consistently develop its Mink claw vacuum technology and now launched the new Mink MV claw vacuum pump series. The Mink MV is a further development of the tried and tested Mink MM series, which has proven itself as the standard in many industrial sectors. With the new Mink MV series, Busch has succeeded in developing claw vacuum pumps that have a significantly lower noise level than comparable pumps on the market. Furthermore, they are extremely compact and efficient. The new series operates in the same way as the previous series, i.e. according to the dry and non-contact claw principle. Therefore no operating fluid is required in the compression chamber, which means that all associated maintenance work, such as oil and filter changes, is eliminated. There is no wear thanks to the non-contact operation and therefore no wearing parts need to be replaced.
vacuum pumps and are therefore able to operate with a lower level of motor performance compared to other vacuum pumps of the same size. All Mink MV claw vacuum pumps are equipped with electric motors that comply with the latest energy efficiency classes as standard, thus achieving the best energy balance. Further energy savings are possible through frequencycontrolled motors (optional), which operate according to demand. It is therefore possible to adjust the output via the speed to meet actual needs. Busch is offering the new Mink MV series in pumping speed sizes between 300 and 1200 cubic metres per hour. The ultimate pressures are 150 and 200 millibar depending on the size. www.buschvacuum.com
Testing News
The lower noise level is achieved through a newly developed silencer located under the vacuum pump. This reduces the amount of space required. Claw vacuum pumps have the highest efficiency of all mechanical
UltraTEV Family UltraTEV Family
Sanitation News
Proven Sanitation Systems
As the UK leader in this niche LeeSan also occupies the largest online portfolio of marine sanitation equipment, parts and service kits. This impressive offering comprises items such as toilets, hoses/pipe & fittings, tanks, toilet spare parts, pump spare
parts, consumables, tank accessories, self-pump-out kits, toilet & tank packages, service kits, pump-out accessories, flush water treatment, water systems, Bilge water filtration, pump-out equipment, seats & lids, specialist tools and waste transfer systems. This all-encompassing inventory, which has also proven popular with individuals working within the domestic, industrial and commercial sectors, consists of components that are readily available for purchase (spare parts and accessories from all major manufacturers included). The Warwickshire-based business is more than happy to supply, quote and advise on all aspects of the pumping process for different mobile welfare facilities. With competences that extend to design, manufacture, technical support and maintenance and status as a member of the British Marine Federation, LeeSan is a consultancy that can be relied upon to provide a quality solution in an efficient manner. T +44 (0)1295 770000 sales@leesan.com www.Leesan.com
UltraTEV™ family prevents catastrophic failure during routine testing at Port of Felixstowe Client - Port of Felixstowe The Port of Felixstowe is the busiest container shipping port in the UK dealing with 44% of Britain’s containerised trade. The Port of Felixstowe have 10 TM UltraTEV Plus units which they use for substation entry and routine inspection.
Background During routine testing Port of Felixstowe identified two instances of Partial Discharge (PD) using the UltraTEV handheld. Area 1 detection - During routine testing PD activity was identified on an 11kV RMU that had been in services since 2005. Area 2 detection - After a planned upgrade of an 11kV substation, PD testing was carried out and revealed activity on one of the RMU Fault Making Switches.
Investigation Area 1 detection - Investigation revealed the one phase termination had considerable PD activity damage and required re-termination. There was also interaction between cores. The cause was poor connections and the cable core spacing being insufficient. Area 2 detection - Investigation revealed the air gap between two phases was insufficient causing interaction between them. This was identified using the UltraTEV’s Ultrasonic mode with headphones.
Impact on business Area 1 detection - If this had been left to the point of failure there would have been disruption to the ports core operation. Area 2 detection - If this had been left to the point of failure it would have resulted in a delay to the future development of this operational area.
4
Spanner Re2 sponsors this issue of
Industry UK
see them on page 8
Evidence of PD at site brought to light by UltraTEV Survey
MKT0088/CS/V1/300616
When it comes to the sourcing of marine sanitation equipment that you can truly trust, there is one particular company you should be sure to consult. LeeSan is a dedicated industry specialist that has been offering appropriate advice and solutions to the marine, welfare and leisure markets for over four decades and is subsequently an organisation most capable of fulfilling individual mobile sanitation and clean water boosting work requirements.
Industrial Excellence SAFETY KNIFE SERVICES LTD THE SPECIALIST IN SAFETY KNIFE SUPPLIES THE BEST PRODUCTS THE BEST SERVICE
Protecting, Supporting, Promoting
Safety Knife Services can offer the largest selection of safety knives & cutters available today. ››
Concealed blade cutters
››
Disposable safety knives & cutters
››
Auto/Semi retractable safety knives
››
Metal detectable safety knives
››
Ceramic safety cutters
CONTACT US ON
The main purpose of the United Kingdom Warehousing Association (UKWA) is to act on behalf of those working within the all-important logistics market. It holds the impressive status as the only trade association fully dedicated to this strand and is therefore the only name you need to remember if you are part of this specific industry.
sales@safetyknifeservices.co.uk www.safetyknifeservices.co.uk
0844 9977 888
Testing News
Established in 1944, the membership company embraces all institutions that operate a warehousing or distribution facility; assisting individuals in a safe, ethical and profitable manner. The leading organisation boasts an ever-growing base of approximately 700 members –
Family Cable UltraTEV Instruments
guiding warehousing and logistics providers, manufacturers, retailers, wholesalers and suppliers with its effective policies and resources. With over 10 million square meters of warehousing space (totalled from around 2000 depots across the UK), the UKWA is well placed to fulfil its mission: to protect and advance the interests of members whilst prompting best practice and strategic business progression. Those involved with the trade body can take advantage of guaranteed custom, specialist UKWA publications and insurance and invaluable networking and marketing opportunities in the form of annual conferences and monthly magazines. To find out more about the benefits of membership then please consult the team using the contact details provided. T +44 (0)207 6368856 www.ukwa.org.uk
ENW share their experience and results from testing 191 33kV cables with the CableData Collector™
Saving Lives and Reducing Injuries
Client - Electricity North West
and policy development; assisting individuals where possible with the provision of expert consultancy advice, audits and public announcements.
Electricity North West is a distribution network operator that owns, operates and maintains the North West’s electricity network, connecting 2.4 million properties and more than 5 million people to the National Grid.
Challenge ENWL carried out a two year evaluation of EA Technology’s CableData Collector™ (CDC) and CableData Analysis™ Software (CDAS). This evaluation involved the online condition assessment of 191 33kV medium voltage (MV) cables on their network. ENWL did their own analysis using the CDAS software. As this was an evaluation trial, ENWL chose not to perform any remedial action on the cables tested, but instead to wait and see what happened to the cable’s performance.
TM
The Royal Society for the Prevention of Accidents (RoSPA) is a trade association that purposefully strives to prevent the occurrence of accidents commonplace at home, in working environments, on the road and at leisure through the implementation of safety-focused education.
CableData Collector
Solution
Over the same two year period a number of the cables failed as predicted with the CDC. The chart above shows how many of the cables have faulted since testing in each of the three green, amber, and red categories and is clearly demonstrating the ability of the CDC to assess the condition of the cables in relation to their likelihood of failure.
Benefits ENWL now intend to incorporate CDC testing into their outage planning procedure. Any long-term 33kV planned outages will include a pre-outage check on the adjacent circuits which will be carrying all the load during the outage.
% of cable faults in each category within 2 years
Analytix sponsors this issue of
MKT0088/CS/V1/300616
The chart below shows the results of the testing that was conducted over the first 18 months of the two year evaluation period. The results are broken down into three categories: Green - a test where no Partial Discharge (PD) was found. Cable does not need to be tested for another two years. Amber - some levels of PD were detected. Cable should be retested in 6 months’ time to see if the levels have increased. Red - PD levels indicate significant degradation. The cable should be taken out of service for repair or replacement.
Industry UK
The registered charity – which has disclosed that more than 14,000 people in the UK die annually as the result of preventable accidents – endeavours to save lives and reduce injuries with its meticulously conducted campaigns. RoSPA is therefore heavily involved with data attainment, research completion
see them on page 6
With a history dating back almost 100 years, RoSPA has remained loyal to its simple yet effective philosophy, which revolves around the notion that life should be as safe as necessary – not as safe as possible. This effectively means that unless risks are intolerable, comprehensive and thorough accident prevention is about managing these risks safely – not banning such activities altogether. Organisations can therefore become more operationally efficient without becoming vulnerable to needless intervention. If you have any questions please don’t delay in contacting the team at RoSPA. T +44 (0)121 2482000 help@rospa.com www.rospa.com
5
Laboratory & Technology News
Analytix launches new PYRO advanced muffle furnace The all-new Milestone PYRO from Analytix is the most versatile and advanced muffle furnace yet and is a highly-efficient alternative to conventional muffle furnaces dramatically reducing ashing times from hours to minutes using microwave enhanced heating providing time savings up to 95%. System flexibility allows four configurations: ultrafast heating, high sample throughput, large scale, and sulphated ashing.
provides high throughput with 24 samples handled simultaneously. The ultrafast heating option heats to 1,000°C in 8 minutes and is ideal when a fast result is required. Both systems can be used in conjunction with Milestone UltraFAST crucibles that provide instant cooling of the crucible after the ashing process is complete so a separate desiccator is not required. In addition, all crucible types can be used – metal, porcelain, and quartz fibre.
The system offers a huge range of potential applications, such as ashing, sulphated ashing, loss on ignition (LOI), dietary fibres, fusion, sintering, and all high-temperature reactions under controlled conditions. Safe sample preparation is ensured by removal of all odours and corrosive fumes through an integral exhaust whilst providing more comfortable working conditions by minimising heat loss and transfer to the laboratory.
The sulphated ashing option enables analysts to add sulphuric acid to samples and place crucibles directly into the microwave muffle furnace without the need for the preliminary charring step. Sulphuric acid fumes released from crucibles during the sulphated ashing process are continuously removed and neutralised by the system.
all crucibles. The system provides auto-calculation of loss on ignition through interfacing with the analytical balance before and after ashing and can export the ashing profile in Excel or pdf format. The PYRO is controlled via a choice of two compact terminals with easy-toread, bright, full-colour, touchscreen displays. T +44 (0)844 8004220 www.analytix.co.uk
Faster ashing and sulphate ashing with a microwave enhanced system Reduce current laboratory ashing times up to 95% plus high sample throughput Odours and corrosive fumes automatically and safely removed Lower operating costs compared to conventional muffle ovens Touch screen interface for documentation and traceability TEL: WEBSITE:
Even temperature distribution across the muffle eliminates cold spots and ensures reproducible ashing across
The standard heating option
EMAIL:
The Laboratory Products Association, commonly known as the LPA for short, began in the early days as the Scientific Apparatus Makers Association (SAMA). The company has progressed significantly since its establishment in 1918 and is now widely recognised for being a foremost trade association representing the interests of those working within the laboratory products segment. Endeavouring to support manufacturers, suppliers, distributors and other such industry experts, the LPA specialises in the supply of quality resources designed to enhance the business operations of related organisations. Its member companies are fronted by seasoned individuals focused on reliable lab product and service implementation, covering aspects such as glass & plasticware, chemicals, equipment and components utilised in scientific research, applied science and life science across the globe.
aid kit in the event of sudden cardiac arrest. Minute changes in manual CPR compressions have a significant impact on survival rates: even a minimal slowing down in the speed, or irregularity, will prevent oxygen effectively passing around the body. and exciting networking opportunities. Joining the organisation will also guarantee first-rate education, access to necessary business development tools and of course, availability of international industry market information and surveys. The LPA operates with a particular mission statement: to enable its members to constantly improve their global and commercial success. If this sounds like a concept of particular interest to you then please contact the group at your earliest convenience. T (703) 836 1360 aerrera@lpanet.org www.lpanet.org
Liverpool FC is the latest sports club to invest in the safety of its players by purchasing two Lifeline ARM devices from Martek Lifecare. Designed to provide perfect compressions for continuous hands-free CPR, the ARM is an essential piece of first
A hands-free automatic CPR device like the Lifeline ARM takes away human fatigue from the situation, and significantly improves survival rates. The ARM provides continuous CPR compressions, or works in conjunction with an automated external defibrillator (AED) for a shock-compression cycle. It’s ideal for taking a patient from the site of collapse through to the hospital without interruption to the CPR cycle. The device fits around a prone body with ease and can be loaded onto the ambulance with the patient, providing continuous CPR in the process. It also prevents risk to
Right solutions, right partner The best labs choose Designed to help meet your environmental regulatory requirements, ALS Environmental offer accurate, legally defensible, analytical data. Providing their customers with an extensive range of UKAS, MCERTS and DWTS accredited analytical services for water, land and waste monitoring, making ALS Environmental one of the UK’s leading providers of analytical services. By working with their loyal customers for over twenty years they have been able to develop a range of analytical services that meet your specific needs. By responding in a timely and efficient manner to your analytical and sampling requirements, via their broad network of laboratories and service centres across the UK and Ireland. This network also means ALS Environmental are able to provide customers with additional capacity and the reassurance of back-up laboratory systems.
To further support your environmental monitoring requirements, ALS Environmental also offer in-house field sampling and monitoring, direct data transfer, sample scheduling, automation of registering and a host of other support services. Another great success for ALS Environmental came with the arrangement of its Future Waste conference. The highly interactive event – which included a laboratory tour – provided delegates and speakers with the opportunity to discuss emerging issues impacting the waste sector. The important gathering saw the participation of many industry experts following a jam-packed schedule of focused presentations covering topics such as emerging contaminants and municipal waste testing requirements. Following on from the success of this event, ALS will be hosting another interactive conference entitled ALS: #YourSOILution on Tuesday 13th December 2016 at their Coventry Laboratory. T +44 (0)2476 421213 info.ukenviro@alsglobal.com www.alsenvironmental.co.uk
6
0844 800 4220 www.analytix.co.uk sales@analytix.co.uk
Martek Lifecare - Providing Peace Of Mind for Liverpool FC Thanks To The ARM
Striving For Industry Excellence
Diverse value is provided for members in the form of useful educational programs
SPEED UP YOUR ASHING PROCESS
The breadth of their expertise is evidenced with the great scope of its product offering. The Leman Instruments line consists of various modules in standard and custom designs, all of which have an involvement with high purity Hydrogen (H2), Nitrogen (N2), Zero Air and combined solutions for FIDs, GCs, purge Air generations, CH4 & CO2 scrubbers, N2 and multi gas for LCMS with the incorporation of strong performance communication interfaces (RS485, Ethernet and WLAN options) and the possibility of AK protocol integration.
Spanner Re2 sponsors this issue of
Its most recent innovation is the freshly released GC STATION 60L & GC STATION 60LC. This particular addition has proven popular as a fully automated solution that is entirely unique; remaining, in effect, the only gas generator available for purchase that combines technologies whilst integrating an inboard compressor. The modules delivered by Leman Instruments are incredibly beneficial and are superior alternatives for a whole host of reasons. As well as being straightforward to install with noticeably high pressure stability, they also have the aptitude to run seamlessly whilst increasing the resolution and detection limits of instrumentation. Contact T 0033 450394922 a.berteletti@leman-instruments. com www.leman-instruments.com
Industry UK
“Everyone remembers Fabrice Muamba’s critical on-pitch collapse from sudden cardiac arrest in 2012,” said Steve Lowe, Regional Sales Manager for Martek Lifecare. “The only reason he managed to survive was with a similar hands-free CPR device – and the technology since then has already significantly improved. “The ARM can work with AEDs to leave first responders and paramedics free to attend to other lifesaving tasks, and we’re proud to be able to deliver such vital equipment to such an established sports club.” T +44 (0)1709 599219 www.martek-lifecare.com info@martek-lifecare.com
High corrosion resistance with Wixroyd spring plungers
Leman Instruments Leman Instruments is a forwardthinking European enterprise that is renowned for its cost-effective range of premium quality and high performance scientific components and modules specifically designed for applications requiring solid, liquid and gas analysis.
emergency responders, as manual CPR in a moving ambulance presents difficulties and increases the likelihood of inconsistent compressions. The ARM removes these problems.
of corrosion protection and outstanding wear resistance – even under the most extreme conditions of use.
Spring plungers are a universal tool used in many industries and applications including medical engineering, food technology and hygienic environments as well as in outdoor areas. These present challenging environmental requirements for the usual standard materials such as steel, stainless 303/4, however, Wixroyd has the spring plunger to take them on. Wixroyd’s new corrosion resistant spring plunger range 32102 are a standardised solution to these environmental challenges. What’s more is they provide reduced prices and lead times compared to developing a bespoke solution. The spring plunger is formed of a sleeve composed of passivated A4 steel (1.4404), while the springs and the ball consist of passivated steel (1.4568) and ceramic (Si3N4), respectively. This selection of materials provides a high degree
see them on page 8
Featuring a distinctive black colour, the ball offers additional advantages such as being harder than most usual standard parts, it’s impactresistant, electrically insulating and non-magnetic Normally our spring plungers tested specifically for spring deflection and elastic force whereas our new corrosion resistant spring plungers are subjected to weather resistance testing as well. Salt spray test: The spring plungers withstood the salt spray test without any difficulty for 96 hours. Cold tests revealed: The spring plungers do not freeze up and remain fully operational even in temperatures below freezing. Temperature Test: spring plungers are suitable for use in the upper temperature range up to 250°C. +44 (0)845 2666577 info@wixroyd.com
Product Innovation Award
PIN authenticated, hardware encrypted data storage devices
Software free | Multi OS & Platform independant On-the-y AES 256-bit full disk hardrive encryption Capacities of up to 8TB | FIPS 140-2 L3 certiďŹ ed | Bootable
Analytix sponsors this issue of
Industry UK
see them on page 6
7
Commitment to Excellence
Competitive renewable energies Here at Best Practice we pride ourselves on promoting businesses of the highest calibre operating within a number of important industry sectors, bringing you the most recent news, services and solutions shaping the engineering, manufacturing, processing, control, industrial, environmental and packaging sectors. We are therefore delighted to present Spanner RE² GMBH with our duly deserved Commitment to Excellence profile and tell you more about the organisation’s history as well as its latest successes, innovations and future plans. The business has roots dating back 50 years with the formation of its parent company Otto Spanner GmbH. With the
swift progression of the German brand it became logical to expand, particularly as the group noticed a gap in the market for pellet boilers, and so Spanner RE² GMBH was established in 2004. Founded by Helmut Spanner and Thomas Bleul, the enterprise was set up with a distinct purpose: to provide customers with a specialised service focused specifically on renewable energy and the production of exceptional Biomass CHP’s for those with a high heat demand. Essentially making use of residual wood, Spanner RE² GMBH had taken the necessary steps to achieve greater independence from the automotive industry (with Otto Spanner GmbH being
best known for servicing many major motorised brands such as BMW, Porsche and AEG as well as the metal working industry). In 2006, after liaisons with the inventor of wood gasification units, the team began immersed in this field and subsequently sold their first machine in 2008. The company has succeeded to go from strength to strength and has since delivered over 550 units to date, delivering its exceptional service and quality level of in-house training to customers all over the globe. With its dedicated wood cogeneration plant Spanner RE² GMBH can continue with its production processes whilst remaining fruitfully innovative and operationally efficient. The aforementioned Biomass CHP System is an intelligent machine strategically developed to convert wood chips into biomass electricity and warmth with unsurpassed confidence and ease. As well as being a cost-effective way of accessing renewable energy, this particular product also has the proficiency to increase power yields (dependant on location and legal conditions). Meanwhile, the HV30-V1.1 and HV45-V1.1 innovations are newly developed compact wood cogeneration systems that usefully provide clients with the opportunity to fit the heat-carrying component (covered with a resistant coating) in rooms with a minimum standard ceiling height of 2.50m. Performance sizes of 30 kWel or 45 kWel have proven popular with hundreds of organisations; namely agriculture and forestry businesses, hotels, restaurants and heat grids in Europe, Asia and North America. These customers have appreciated the appropriateness of these set dimensions and the power obtained with biomass electricity and warmth from wood gasifier as well as the way in which several systems could be effortlessly combined. The overall mission of Spanner RE² GMBH is to develop and commercially promote unique and economically appealing regenerative power generation technologies of a high standard. As one of the most longstanding manufacturers of its kind engineering and producing systems from its facility in Germany, the group has attained a solid reputation as a respectable supplier that unlike many of its competitors doesn’t rely upon the work of resellers, yet has managed to build itself a substantial and internationally diverse customer base. This means that in essence, clients can purchase solutions direct from the manufacturer and can trust in the quality control procedure undergone – especially since every product has achieved “advanced gasification” classification by
8
Spanner Re2 sponsors this issue of
Industry UK
OFGEM in UK. The company has recently launched its latest addition to the portfolio; EnergyBlock, which is entirely original when compared to what is currently available within the marketplace. The customisable and coordinated system, which comprises a wood gasification unit, cogeneration unit and intelligent control centre, is perfect for heat and electricity generation and has been recognised for its fast start-up, variable set-up possibilities, compactness and capability to be fired with wood chips, pellets and briquettes. In terms of future plans Spanner RE² GMBH is looking to continually increase brand recognition across the UK whilst developing its services in Ireland. Attendance at industry-related trade events such as the LAMMA Show, EnergyNow, All Energy, Pic & Poultry and the Royal Highland Show has boosted the company’s profile significantly and the team are now looking forward to maximising interest even further whilst promoting the core advantages of their environmentally friendly and notably advanced renewable energy enhancing systems.
Please get in touch with Spanner RE² GMBH if you would like to find out more about the products and services obtainable. Choosing the most suitable solution for your exacting requirements is made easy with the workforce’s wealth of industry experience and solid knowledge base, so please call the team today if you wish to enquire – you can rest assured that will be met with an appropriate response from a welcoming and amicable company representative. Contact T +49 (0) 8773 70798288 www.holz-kraft.de/en
see them on page 8
Commitment to Excellence
Analytix sponsors this issue of
Industry UK
see them on page 6
9
Forklift Truck News
The used forklift professionals Here at Best Practice we make it our core responsibility to promote the movements of wellestablished and productive companies shaping various industry sectors for the better. We are therefore delighted to introduce our readers to the services and solutions available from Multi Lift Sales whilst telling them more about this longstanding organisation. For over 35 years Multi Lift Sales has been adeptly facilitating the needs of customers with the breadth of its industry knowledge and vast range of high quality forklift solutions. The company, which is situated in Southampton but occupies three additional depots in London, Birmingham and Milton Keynes, can confidently support clients
across a far-reaching geographical range courtesy of its centrally positioned bases.
Operating with a strong delivery network running from London and the West Country to the North of England, Scotland and Wales, Multi Lift Sales is renowned for its ability to efficiently supply robust forklifts in an array of makes, models and sizes (all of which are backed up by solid expert advice and technical support). The selection includes Pedestrian C/B & Stackers, Reach Trucks and Side Loaders as well as second hand and refurbished forklift trucks powered by diesel, electric or LPG gas. The used machines, which are available in 3 and 4 wheel alternatives, are competitively priced, meticulously inspected and fully certified to the necessary ‘LOLER’ requirements, making them completely usable and dependable.
Workwear Excellence
Market leading solutions
For customer convenience and confidence the products are sold with a full 1 year warranty on the battery (if electric) and 3 month warranty on the machine. For customers seeking extra guidance the company is pleased to provide a supplementary service revolved around forklift driver training; a programme most beneficial for new drivers and those in need of a refresher course. If you are looking to sell your equipment then this can also be arranged with the Multi Lift Sales team, who can take both single machines and fleets of forklifts off your hands. They are also able to offer part exchanges against all procurements of any old apparatus brought in should this be required. Please don’t hesitate to contact the highly capable forklift specialist at your earliest convenience if you have any enquiries or if you wish to find out more about the products available. Contact can be made by email or telephone should you have any questions, and a friendly and approachable representative will be more than happy to discuss individual requirements whether you are interested
in buying, hiring or leasing machinery. It is important to note that the Multi Lift Sales stock list is updated on a regular basis, so if you would like to keep fully informed of any changes made then it may useful for you to subscribe online via www.multiliftsales.co.uk. Contact T +44 (0)7979 243004 info@multiliftsales.co.uk www.multiliftsales.co.uk
Goods Lifts News
Best Practice UK has selected APT Fabrics as the Workwear Excellence to have attended this year’s Safety and Health Expo for their outstanding performance and exceptional product range. Attending the show at ExCel, London, APT showcased their superior, high performance Eco Dry range of laminated fabrics as well as the new, innovative Aclimatise range. Manufactured in the UK, Aclimatise is the world’s first thermoregulated waterproof, breathable and windproof fabric system. It includes a range of fleeces, gilets and jackets designed to challenge the norm in the outdoor clothing industry. A workwear range of waterproof garments will soon be introduced to further enhance the collection. A popular hit with the audience was APT’s unique Hi-Vis collection. As 95% of Hi-Vis clothing currently ends up as land fill, APT Fabrics has developed a solution meaning their range can be fully recycled at the end of life, leading to substantial benefits for the environment. The company is currently working on a new Hi-Vis jacket and trousers combo to rival all other brands. The show was a major success for the company as they received a great deal of interest, many potential leads and an overwhelming amount of positive feedback. “Our products were a major hit at the show and we were able to speak to a great deal of existing and potential customers,” commented Founder Stanley Russell. “We were shortlisted for 3 sections and were highly commended for our Fabric innovation.”
• Wide choice of models The Northern Ireland-based company was set up by Stanley in 2008 following his 30 years of experience in the fabrics industry. His knowledge in every facet of the sector – from coating to weaving – prompted the budding entrepreneur into starting up a company specialising in high performance products. The resulting APT Fabrics is now a renowned name in the delivery of specialist solutions aimed at the PPE and technical clothing segment. Its competencies extend to customised fabric sourcing and modification services, and seminars, consultancy and technical textile training schemes are also available to be implemented where necessary. “At APT Fabrics, we are passionate about providing customers with high quality products that really work,” Stanley continued. “We are always innovating; coming up with outstanding products and considering how to bring new technologies into current workplaces.
• Maximum height 20 meters • Up to six stopping places • Maximum load two tonnes • Goods-only/ personnel models • On-line quotation facility • Free-standing and self-contained
“We are now working on a number of new and exciting products which will soon be available and our aim is to continue to make customers aware of the many potential benefits our Aclimatise range has to offer.” T +44 (0)2842 758661 info@aclimatise.co.uk www.aptfabrics.co.uk www.aclimatise.co.uk
10
Istorage sponsors this issue of
Industry UK
see them on page 7
Autoclaves News
Latest 100 litre Autoclave – small footprint The Priorclave QCS 100 laboratory autoclave is the perfect choice for any lab manager or technician looking for a more compact, economically priced 100 litre capacity autoclave. Despite its large 500mm diameter chamber, believed to be largest currently available for this size of machine, the autoclave design has a much smaller overall footprint, providing laboratories with the opportunity to have installed the QCS100 where other designs are often too large. This front-loading autoclave achieves its extremely competitively priced owing to the robust stainless steel cylindrical chamber manufactured by Priorclave at its UK manufacturing centre. A prime safety benefit is the door opening mechanism; a single-handed operation that only releases when temperatures and pressure are at pre-set safe levels.
access to parameter settings. To help prevent cross contamination is a laboratory the QCS 100 autoclave incorporates epoxy coated panels and frame members treated with an antimicrobial agent that is effective against bacteria and fungi including MRSA, E.coli, Listeria, Legionella, Campylobacter, Salmonella and Pseudomonas. T +44 (0)208 3166620 sales@priorclave.co.uk www.priorclave.co.uk
Precise control of the sterilizing process has been made easy using single push-buttons on the Tactrol® 2 microprocessor control panel. One touch controls enable the user to step through settings of temperature and time in accordance with best practices for specified loads. There is also a secure key-lock switch on the control panel which governs
Handling & Storage News
The storage handling experts G-Force Europe are a manufacturer and supplier of workplace equipment, focusing on storage, handling and on-site essentials. Based in Wellingborough Northants they use rotational moulding to manufacture their own range of “Supertuff” plastic products which includes plastic lockers, litter bins, container trucks and gritbins. These sit alongside a comprehensive range of equipment offering solutions for many different types of application such as warehouses, production sites, workshops and heavy industry. As we move into the winter months the weather can be a disruptive influence on businesses with snow and ice even preventing access to yards and carparks. And whilst we have been lucky to have relatively mild winters in recent years, the winter weather can always pack a punch! It is therefore vital that businesses are prepared for the worst that winter can throw at them, as the potential disruption can be costly. To assist organisations get prepared G-Force Europe has put together a range of “winter essentials” offering solutions to help keep out door areas safe and operational. The range includes the
lockable “Supertuff” gritbins, available in two sizes delivered direct from the G-Force factory. Available in two sizes these gritbins can be supplied in a range of colours to either blend in or stand out. G-Force also keep good stocks of salt and are currently giving away 100kg of salt with every order for 3+ grit bins. For clearance of yards and carparks, customers can choose from a range of snow shovels, snow pushers, and salt spreaders. T +44 (0)1933 224392 sales@gforceeurope.com www.gforceeurope.com
Facilities Management News
G Force sponsors this issue of
Industry UK
see them on page 11
11
Pumps & Valves News SEEPEX pumps reduce operating costs for Thames Water Thames Water is the UK’s largest water and sewage treatment company, providing wastewater services to 15 million customers. SEEPEX progressive cavity pumps (PCPs) have delivered process improvements at their Reading STW by replacing piston pumps to reduce operating costs and onward sludge transport costs. The pumps transfer de-watered digested sludge to storage silos before final disposal. Thames engineers identified a large saving in disposal costs if they could increase the ds content of the dewatered sludge to 25%; however they needed reliable pumps to transfer the dewatered sludge over 80metres, with a static head of 30m, without increasing system costs. The existing piston pumps had frequent maintenance requirements and generated high operating pressures as well as using 31KW of power – adding up to a high cost of ownership for Thames Water.
reduced power consumption (15KW compared to 31KW) and up to 75% reduced discharge pressure due to the low pulsation flow characteristics. SEEPEX PCPs have been installed for over 12 months, requiring no maintenance interventions in this time, and the system has delivered a hat-trick of cost reductions: lower sludge disposal costs, lower energy use and reduced maintenance costs. T +44 (0)1935 472376 sales.uk@seepex.com www.seepex.com
In contrast SEEPEX open hopper pumps transfer the higher ds% sludge with 50%
New product launch from SEEPEX The flow rate, once set, is monitored and controlled entirely by the pump drive which adapts to variations in operating conditions to ensure accurate repeatable dosing of even the most viscous products. Dry running and over pressure sensors feedback to the drive and protect the pump from damage. In 2016 we have improved our dosing pump offering with the launch of a Smart Dosing Pump (SDP). This comprises a progressive cavity (PC) pump with an intelligent drive and controls. Users only need to input the proportional flow ratio and the pump monitors and adjusts automatically. Operation is simple; the SDP has an intelligent inverter drive which is programmed either locally via an HMI or centrally via a fieldbus interface. The SDP can also be controlled via analogue/digital I/Os either locally or remotely by a PLC.
Flow Control News
The Smart Dosing Pump delivers all of the benefits of PC pumps with added control options; they are available on pre-wired skids, instantly ready for installation and integration within central systems. The accuracy of both batch and continuous flow is ensured, saving money on chemical use, and the efficient operation of the pump ensures the lowest life-cycle costs are incurred. Contact T +44 (0)1935 472376 sales.uk@seepex.com www.seepex.com
Enclosures News
Specialist enclosures for electronics manufacturing & prototyping With over 10 years of experience in the enclosures business, KGA was set up in December 2014 by Director Ken Stares to create quality products for electronic instrument manufacturers.
KGA Enclosures provide off the shelf and customised extruded aluminium enclosures for the electronics industry. Available in various lengths and profiles, the cases and end plates can be customised with holes, slots and graphics. All enclosures are supplied with two End Plates and Assembly Screws. The standard accessory range also includes dovetail mounting flanges, TPE End Caps and Sealing Kits to IP65.
For more information on KGA Enclosures and their exceptional products and services, contact the company on: T +44 (0)1535 636856 sales@kgaenclosures.com www.kgaenclosures.com
Made from Aluminium 6063 T6 (HE9), the cases standard lengths include 40mm, 80mm, 120mm, 160mm and 220mm and come in black, blue or silver.
12
Istorage sponsors this issue of
Industry UK
see them on page 7
Bearings & Lubrication News
G Force sponsors this issue of
Industry UK
see them on page 11
13
Process & Control News
Laser Machinery News
On your desk in five days suppliers and we believe our new delivery programme will enhance our position in the industry still further. The two-year warranty on all our products is further proof of our intention to continually exceed our customers’ expectations.”
PCB Piezotronics, a world leader in vibration, acoustic, pressure, force and torque sensors, has announced that its most popular products are now available “on your desk in five days”. Commenting on the new five-day service, Graham Turgoose, Director, PCB Piezotronics Ltd, said: “The company prides itself on being able to deliver products quickly in the UK and Ireland and we believe this to be our customers’ number one priority so we are concentrating on ensuring that the widest possible range of products can be delivered from stock and on the customer’s desk within five days.” He concluded, “Total Customer Satisfaction sets us apart from other
The range of products available “on your desk in five days” includes accelerometers, both single and triaxial, six MEMS DC response accelerometers, ICP® industrial accelerometers, microphones, ICP® force sensors, dynamic pressure sensors, signal conditioners and cables. PCB Piezotronics is a world leader in the manufacture of piezoelectric sensors, accelerometers and associated electronics for the measurement of dynamic pressure, force and vibration. The company’s ICP® sensors incorporating microelectronic signal conditioning circuitry within the sensor housing are an industry standard and their widespread popularity has made PCB Piezotronics an enduring success worldwide. T +44 (0)1462 429710 ukinfo@pcb.com www.pcbsensors.co.uk
Industrial News
The filter people with 30 years experience ‘Croft Filters are a leading filter manufacturer with over 30 years experience designing and manufacturing industrial filters to solve filtration challenges in a range of manufacturing sectors all over the world.
Croft Filters also stock a range of material (often for next-day delivery), including stainless steel mesh, perforated sheet, wedge wire, fine wire mesh, wire mesh sheets, wedge wire, filter mesh and galvanised wire mesh.
Our extensive expertise means customers benefit from filter manufacturing solutions in any shape or design, including basket strainers, duplex filters, vacuum filters, cone filters, cylinder filters and screen filters in perforated plate, woven wire mesh.
At Croft Filters, we take great pride in our commitment to understanding our customers needs and supplying a rapid turnaround on our bespoke services.
‘The expert team at Croft Filters are available to offer support and advice on any aspect of mesh filters, filter elements and filter housings.
T +44 (0)1925 766265 www.filters.co.uk sales@filters.co.uk
We have perfected the Dixon Ring manufacturing process, developing a machine especially for high-speed production. And we’re soon to launch a new range of filters based on Additive Manufacturing technology, which will offer our customers a number of significant benefits, such as cutting-edge design, high strength and impressive production speeds.
The company was established in 2002 by Robert Eggebrecht and Chuck Bloomquist when discovering the need for a methodology and portfolio of services to build and maintain effective programs for protecting data and critical assets. Over the first five years, the cofounders were dedicated to educating the marketplace on the benefits of ISO 27001 certification with a focus on quality management concepts of continuous improvement and measurement. Through the years, they have pioneered the service model for designing, implementing
14
ATC Semitec – ‘Sense,Control & Protect’ ATC Semitec is the UK’s leading distributor of thermal components working with some of the major and most innovative suppliers in the NTC thermistor and thermostat industry.
With superior quality the SEREB SB series can be fine-tuned to offer critical thermal protection for rechargeable and primary battery applications.
“With over 25 years’ experience in the thermal controls industry you can feel confident that you are working with a quality supplier of thermal components,” commented Managing Director Robin Savin. “We work with you to help design in the most suitable temperature sensor or safety component for your industrial product or domestic appliance application. This has been reflected in our growth as a key supplier in this market.
Together they are a formidable team. Quality products, comprehensive technical
Their renowned product partners including Semitec, PEPI, Thinking, Asahi, Matsuo, NEC and Fuzetec were each selected because of their industry reputation in providing high quality, innovative products. “In everything that we offer, we Sense, Control and Protect,” Robin explained.
Safeguarding critical assets worldwide InteliSecure is an internationally recognised leader in critical asset protection. Their advanced portfolio of information and network security services helps a wide range of organisations protect their most critical assets. Their market leading solutions satisfy a wide range of customers around the world providing them with the ability to secure current and future revenue and earnings with enhanced confidentiality, while maintaining optimal operational efficiency and reputational integrity.
Temperature Control News
and managing data loss prevention (DLP) systems and associated programs with an emphasis on creating and maintaining Critical Asset Protection Programs. InteliSecure is the first and only Managed Security Service Provider (MSSP) to challenge the status quo in cybersecurity by delivering a hybrid application of expert human intelligence with a proven Critical Asset Protection Program™ methodology. These innovative Managed services are supported by Consulting, Technical, Incident Response and Security Assessment services that prevent data loss, protect privacy and safeguard critical assets.
With over 1000 products, the wellestablished company stock thermal components which support a large number of industries from the specialised high precision medical sensor market, the fire detection market and fast response temperature sensors for the domestic heating market. They can also create bespoke customer solutions if required to tailor variable lead lengths, special fittings, connections or unique sensor tips. In particular, the miniature F Micro NTC Thermistor sensors which are only 0.3 mm in diameter, by 2.3mm long, are ideal for use in the emerging wearable technology market and in the high precision medical sensor market. New in 2016 is the range of miniature battery protection devices from NEC.
T +44 (0)118 976 8960 sales@intelisecure.com www.intelisecure.com
Istorage sponsors this issue of
Industry UK
see them on page 7
assistance, extensive stock-holding and competitive pricing all adds up to the best solution for your company’s needs. T +44 (0)1606 871680 sales@atcsemitec.co.uk www.atcsemitec.co.uk
Measurement & Inspection News
Partners in precision
When it comes to the provision of quality metrology instruments, the Bowers Group is a company you should seriously consider reaching out to. With its richly diverse portfolio – which is split into a number of dedicated divisions – the organisation is well placed to assist clients looking to develop various products of an exceptional calibre. Appreciating that customers have high expectations, the team strive to respond to
the demanding specification criteria presented and offer suitable processes which ensure that all compounds, substrates, components and products are fit for purpose. The allencompassing offering therefore extends to solutions within the following categories: calibration tools, height gauges/hand tools, material testing, vision and optical and surface finish contour & roundness. The company is best known for its involvement within the metrology-based product and service arena and is traditionally associated with the development of bore gauges. Even the most challenging of measurements can be facilitated courtesy of the Bower Group’s solid supplier network, which consists of many important
industry-related brands (including Trimos, Sylvac, Wyler, Innovatest Gagemaker and Accretech), and calibration and technical support is provided as well as manufacturing excellence for added customer confidence. The solutions and services available from the Bowers Group have proven to be most effective within several industries and environments. A particularly notable example includes the application of its XTL Digital Lever Bore Gauge employed by the Mollart Engineering group of companies; otherwise known as an internationally acclaimed pioneer of deep hole drilling machine tools. Mollart operates predominantly within the aerospace, defence, automotive, oil & gas, subsea, mould & die, nuclear, medical, semiconductor and telecommunications markets and was in need of a product that could enhance the efficiency of its hydraulic manifold manufacturing process. They subsequently invested in a Bowers XTL digital lever bore gauge that was integrated to accurately measure Inconel 718 hydraulic manifolds used at extremely high pressures of 20,000psi. With the XTL gauge, which is suitable vertical bore measurement, the team at Mollart could produce clear dimensions in line with strict size and surface finish tolerances. In addition, the 3-point spherical head incorporated eliminated the problems associated with the old bore comparator, which left unsightly and costly scratches that contravened the surface requirement finish. Another case study comes with the effective purchase of a Baty Profile Projector which was chosen by Reverie Ltd as a way to vastly improve the machining and inspection of autoclaved composite parts. The Essex-based design, repair and manufacturing specialist selected the R14 FT2-E variety not only for its high accuracy non-contact inspection capability but also for its strength in checking CNC tool cutter diameters and wear. The projector was utilised specifically for the measurement of key fob trims for a British automotive maker of luxury sports cars and the
G Force sponsors this issue of
Industry UK
development of CFRP trims; a new prototype part currently in production for a high-end male grooming company. It was the favoured option for its ability to measure difficult components and has since been recognised for its added benefit of validating any client returns for fit errors. Because of the quality and accuracy assurances provided Reverie have also saved significant amounts of money – the results obtained prove that the finished components are of the correct tolerance pre-established by the customer and so rejections are prevented. The project at the Engineering and Technology Department at Milton Keynes College, meanwhile, involved the incorporation of a Bowers Hardness Tester perfect for introductory usage. Situated in Leadenhall, the educational establishment wanted to provide students with a practical means of understanding the hardness testing method and so opted for the CV-700 INNOVATEST. Now the multimillion pound centre of innovation and technology can better equip learners studying mechanical, electronic, computer-aided design or fabrication, who can successfully conduct Rockwell, Brinell and Vickers hardness testing on a variety of metallic materials using the machinery whilst finding out more about the all-important decision-making process. Please contact the Bowers Group today for any further information. T +44(0)276 469866 sales@bowersgroup.co.uk www.bowersgroup.co.uk
see them on page 11
15
Hygiene News
16
Istorage sponsors this issue of
Industry UK
see them on page 7
Odour Control News
G Force sponsors this issue of
Industry UK
see them on page 11
17
Liquid Packaging News
The leading quick coupling and multi-coupling manufacturer
sales@tst-tamsan.com 18
Spanner Re2 sponsors this issue of
www.tst-tamsan.com Industry UK
see them on page 8
Industrial News
Securing Confidential Documents whilst on the move
Initially working with Derriford Hospital in Plymouth, the company designed a solution that suited their specific needs. The hospital desired a unit that did not need a key to be locked, was fairly priced and also was better for spinal health. From there, Pro-Stak designed its first hospital unit which included an electronic combination lock and required only vertical lifting, so as to reduce back strain for staff. This led the way to creating the new, outstanding range of Static Use Units and Compact Mobile Trolleys for Medical Ward rounds at competitive prices, which are now used in many hospitals around the UK.
To cater for the needs of NHS hospitals, requiring a secure and convenient way to store confidential and important documents, Pro-Stak Tidy Storage Solutions was established in 2009 as a subsidiary of Pro-Stak – one of the UK’s leading providers of Compact Storage Solutions and Document Management.
Made in the UK, all products are equipped with a secure electronic locking system which eliminates the risk of lost keys, and panics when the unit can’t be opened. They are manufactured from quality Melamine faced board with 2mm PVC edging, meaning they are robust, easy to clean, and offer a modern appearance. Clients can choose from a Maple Wood Grain or High Gloss White finish. T +44 (0)1935 508387 info@pro-stak.com www.pro-stak.com
Deep hole flexibility Manufacturer of deep hole drilling systems and technologies Unisig, has engineered its new B700 Drop Bed machine to effectively generate the critical, high precision features on large and irregularly shaped aerospace components such as landing gear struts. Conversely, the inherent flexibility of the new machine allows it to also process medium sized, more uniform shaped workpieces with minimal changeover time from one to another. The B700 offers an expansive working range with its servo programmable workpiece headstock capability, yet it sports a streamlined overall footprint that makes for space-saving installations and enhanced ergonomics. Unisig claims this unlike other comparable deep hole drilling machines that are often inflexible dedicated systems as well as oversized and cumbersome. A 1,600mm swing over bed size along with the programmable moving headstock allow the B700 to process parts as long as 4,000mm or as short as 500mm. In addition to high precision deep hole drilling, the machine’s operational capabilities include other complex deep hole machining operations necessary in the production of other aerospace parts such as axles, beams, control rods and components for actuators. These include capabilities such as internal contouring via an optional servo bottle boring axis. For performance and excellent process control, the
B700 packs a preloaded drive system together with high horsepower and precisely controlled inprocess feedback system for realtime monitoring. With a 85/94kW (126hp) tool spindle and 58/67kW (90hp) work spindle, the machine productively solid bores up to 200mm diameters and counterbores to 300mm diameters. Another productivity enhancing feature is a 950 l/minute coolant flow for efficient heat reduction, efficient chip evacuation and good surface finish quality. The B700 machine expands Unisig’s extensive B-series line designed for on-centre drilling of cylindrical workpieces in applications such as aerospace, defence and oil and gas. In addition to standard BTA drilling methods, these machines are also capable of counterboring, trepanning and skiving and roller burnishing processes, achieving the extremely strict tolerances required by manufacturers in these and other industries. T 0049 71259687590 www.unisig.de
As the market leader in spiral conveyors in the logistic industry we think of solutions for handling cases & SKU’s. It’s what we do. At Ambaflex It’s not just about building the right equipment, it’s about developing a special solution for you. Here’s to spiral conveying. Spiral elevators for goods-to-man systems, picking modules and sorting systems. LEADING SPIRAL CONVEYOR SOLUTIONS
Analytix sponsors this issue of
Industry UK
see them on page 6
19
Industrial News Excellent Used Machine Tools
Make Your Business More Efficient facilities – 7 tonne and 2 tonne as well as free and friendly service and competitive pricing for both new and used machinery.
Supplying secondhand machine tools and sheet metalworking machinery Dealing with BW Machine Tools you can always expect a prompt and efficient service. Our used machine tools web site is regularly updated. We try to keep the web site simple but informative. However please call or email Andrew or Michael if you have any questions whatsoever, either about the site, or for more detailed information on any of the used machinery advertised.
Telephone: 0116 288 6070 Email: info@bwmachinetools.co.uk Website: www.bwmachinetools.co.uk
Evolve Press Systems strive to provide high performing machinery at extremely competitive prices. Over 40 years of service and sales in the Metal Forming Industry has led the company to fully understand the importance of having the best machinery to perform the tasks you need.
BW Machine Tools Limited 4 Lyon Close, Viking Road, Wigston LE18 2BJ
Though the taste of the liqueurs is the core of their success the stylish labels (a mixture of traditionally English design with an original twist) that the company uses on their products definitely help selling bottle for bottle. “Our inspiration came from English designer William Morris and the vibrant Czech art nouveau painter Alphonse Mucha,“ says Tiffinie, who knew of the potential of labels and launched the Bespoke Labelling
Service, offering personalised bottles of their delicious liqueurs with a name or special message on the label, great for anniversaries or special occasions. 85% of their orders require a personalised label, which the company produces on their own with the LX900e Color Label Printer by Primera Technology. While the fast print speeds and separate ink cartridges keep operating costs low, the main advantage is that labels can be printed when and where they are needed in just the quantities that are required at the moment. So there are literally no minimum order requirements, no plate or die charges or no obsolete label
For more information contact Evolve Press Systems on 01384 410 000, email evolvepresssystems@gmail.com or visit the website at www.evolvepresssystems.co.uk
Choose from a spectacular selection of New Power Presses, Used Machinery, New Coil Equipment and Sheet Metal Machinery, guaranteed to suit your requirements. Their offering however does not stop there, the established company also provide HSG 236 Thorough Examinations, F2197 Statutory Press Inspections, Scheduled and planned maintenance contracts, Overhaul and refurbishment of press equipment, In-house lifting
Original Liqueurs – Original Labels Original Liqueurs – you can just drink them as they are or you can be as creative as Tiffinie Pride, director of The Wiltshire Liqueur Company, and enjoy them in endless ways. Using unusual fruits such as blood oranges grown on the side of Sicily’s Mount Etna and wild strawberries from the south of France, the liqueurs are produced with less sugar than some traditional recipes meaning that the fruits are the dominant flavour of the liqueurs.
In addition, Evolve Press Systems can also help you fix, maintain and optimise your products. Their specialist knowledge of a wide selection of brands and models means they can offer help with whatever you need, straight away. They carry out regular inspections to ensure your safety and efficiency and provide an array of replacement options.
inventory. “During the Christmas season we produce between 100 and 150 labels a day. And without the LX900e we would not be able to offer our personalised labelling service.” Tiffinie adds, “I love the fact that the labels never slip so you can set a large print run and leave it running.” http://primeralabel.eu/
UNISIG’s UNI-50BTA Allows Fast Changeover between Gundrilling and BTA UNISIG has added the new versatile, high-precision UNI-50BTA to its UNI series of deep hole drilling machines. The machine extends the production range by enabling operators to rapidly change from BTA to gundrill deep hole drilling tooling. This allows drilling holes with diameters as small as 8 mm (0.31”) and as large as 65 mm (2.56”), at depth-to-diameter hole ratios of 100:1 or greater. The UNI-50BTA makes it possible to drill with either tooling method within the diameter range in the same part without secondary operations. The UNI-50BTA features a revolutionary pressure head design that enables operators to make the tool change without dismantling the machine, reducing the time for changeover from several hours down to below 10 minutes. The machine further enhances productivity by combining elements from UNISIG’s other successful product
lines into one high-value machine. This provides flexibility in demanding high-production or high-precision applications such as aerospace landing gear actuators, helicopter main shafts and diesel engine and transmission components. The machine features high-accuracy feed and zero-endplay spindles for bottom-forming operations, counter rotation to minimize centerline drift and preloaded ballscrew drives for precise depth control. 262.252.3802 sales@unisig.com www.unisig.com
Specialists in the supply of quality machine tools Deep Hole Drilling Machines, Gun Drilling Machines, Skiving Machines, Durable Tooling, Automation & Engineeering
Suppliers of new & used manual & CNC machines, offering lathes, turning centres,
UNISIG deep hole drilling systems consist of machines, durable tooling, and automation, and are designed to meet the highest performance standards possible. Products are engineered and manufactured in the USA using metric hardware, and include the integration of premium components such as FAG, INA, Parker, Rexroth, Rohm, Schunk, SKF, Wittenstein alpha and ZF. Products are designed following all applicable ISO, DIN and IEC standards, and are exported worldwide.
millers, machining centres, drills, bores, grinders, guillotines, shears, pressbrakes, bending rolls and presses all with overhauls, reconditioning and guarantee.
UNISIG deep hole drilling machines are proven with industry leading manufacturers in all regions of the world. UNISIG is chosen for the ability to consistently meet vital demands of tolerance.
www.philgeesinmachinery.co.uk
20
101 Carlisle Street East, Sheffield, S4 7QN T: 0114 279 7619 | F: 0114 279 7620
Spanner Re2 sponsors this issue of
For more information, please contact 07125 9687590 Email info@unisig.de | www.unisig.de/en
Industry UK
see them on page 8
Facilities Management News
Analytix sponsors this issue of
Industry UK
see them on page 6
21
Control Automation Systems News
22
Spanner Re2 sponsors this issue of
Industry UK
see them on page 8
Industrial News
The British & Irish Association of Fastener Distributors The British & Irish Association of Fastener Distributors, otherwise known as the BIAFD, has roots dating back to the 1940s where it started out as a national association of bolt and nut stockists. Although it was originally established with the set purpose of balancing the post-war domination of British fastener manufacturers, the organisation had to adjust in response to industry developments and subsequently became a non-profit making company limited by guarantee in 2009. The BIAFD is a key representative acting in the best interests of leading UK
distributors and wholesalers of fasteners, fixings and related products. It therefore provides services and support to members of varying backgrounds and specialisms; professionals such as large fastener wholesalers, UK importers and small, family-owned businesses well-practiced in fastener manufacture, assembly, maintenance, construction and building. The trade body works in accordance with the government and other such institutions, boasting a strong network of associated distributors and manufacturers heavily involved with the major consumption and supply markets like the United States, Taiwan and China. If you would like any further information then please don’t hesitate to get in touch with the organisation today. www.biafd.org
Clinching the deal
BTM (UK) Automation Products Ltd is a Bedfordshire-based company best known for its specialised BTM products and quality industry solutions. It is particularly regarded for its remarkable clinching technology - the organisation’s Automation Products Managing Director Mark Firmin was keen to tell us more about this reputable TOG-L-LOC sheet metal joining system. The high-speed mechanical cold forming technique is applied for the purpose
of joining sheet metal production components with ease. Instead of requiring additional fasteners this method uses inexpensive punch and die tooling to create leak-proof joints with a simple, singular press stroke. This means results can be obtained more efficiently than what is achievable with other practices, and since no welding material is utilised there are no supply or storage costs. With standard TOG-L-LOC (circular) tooling, BTM can competently join two sheets up to a maximum metal thickness of 8.0mm. Please feel free to get in touch to find out more. T 01767 677001 btmautomation@btconnect.com www.clinching.co.uk
CLINCH YOUR PROJECT WITH TOG-L-LOC® BTM’s patented sheet joint system joins plain AND coated metals with consistent, strong, leak proof joints ® Tog-L-Loc provides omni-directional strength and is widely used in the assembly of Automotive, White Goods, H.V.A.C and many other sheet metal products. Choose from a variety of tool options for applying Tog-L-Loc® to suit your specific manufacturing requirements.
Master Lock launches new Safety Kits dedicated to maintenance professionals
Below are typical examples of how Tog-L-Loc® can also save on the cost of consumables such as rivets, nuts & bolts, weld tips and adhesives.
professionals and electricians maintain compliance with safety regulations by providing the right tools to roll out safety protocols quickly when necessary. New kits includes a selection of Master Lock safety lockout best sellers and essentials including the S2394 Universal Mini Circuit Breaker that locks out practically all miniature ISO/DIN circuit breakers with no tool required! Safety at work is an essential concern for all professionals. Every year, thousands of work related accidents occur while repairing or servicing industrial equipment. Most of those accidents are due to energy sources that have not been isolated.
safetyeu@mlock.com www.masterlock.com
THE GLOBAL EXPERT IN LOCKOUT TAGOUT SOLUTIONS
Master Lock as the world’s largest manufacturer of padlocks and one of the main suppliers of safety equipment decided to make safe isolation easier and accessible to all by offering new Safety kits for General Lockout (MAINTKIT-EN) and Electrical Lockout (ELECKIT-EN). Each kit contains everything needed to easily implement an effective Lockout /Tagout system in compliance with the “17th edition BS7671” in the UK. The concept helps maintenance
BEST SOLUTION FOR PIPELINE MAINTENANCE Master Lock has developed a device preventing access to blind flanges until all work has been completed • Fully conceals flange bolts • Durable aluminum and hardened steel construction • Four locking holes • 3 sizes available to cover nuts up to 70mm diameter
• S3922 • S3923 • S3924
44 Lit-L-Loc® Hand Gun with Hydraulic Intensifier:
An inexpensive tool for low volume production. Capable of joining a maximum thickness of 3.0mm mild steel. Various strokes & throat depths available 44 BTM Small Production Presses: Either pneumatic, hydraulic or pneumohydraulic systems can be designed and built to your specifications 44 BTM Robot Cells: Either single cell or multiple cells for medium to high volume production. Any Root, any size! 44 BTM Single Jointed Presses: These can be floor standing or bench mounted utilising either BTM’s patented pneumatic toggle head, hydraulic system or the very economical pneumohydraulic system. Operated via foot switch or two-hand start safety system (depending on stroke of press) Standard Units from 10kN to 400kN Various strokes & throat depths available 44 BTM Press Brake Tooling is an effective & cost saving way to utilize our patented Tog-L-Loc® sheet metal joining system and are available with a wide range of throat depths. Use a single unit or stack them up for multiple joint applications. Ready to install in your power press! 44 BTM Duct Joining Clinch Gun: Pivoting jaws allow the operator to manually open the jaws to allow clearance of flanges etc. Several sizes and styles available
BTM (UK) Automation Products Ltd Tel: 01767 677001 | Email: btautomation@btconnect.com Web: www.clinching.co.uk
www.masterlock.eu
Analytix sponsors this issue of
Industry UK
see them on page 6
23
Disinfection Solutions News
Sanondaf touchless disinfecting solutions Sanondaf have a system of disinfecting rooms and equipment by filling a room with a dry mist (fogging) of a patented chemical compound (hydrogen, peroxide & silver) that kills 99.99% of harmful bacteria, viruses and moulds.
The latest Generation of SANONDAF touchless disinfection solutions combine the effect of both our spraying devices and disinfectant solutions. The dual effect of both Devices and Disinfectants enables the air and surface in a room to be disinfected automatically. Our hospital grade disinfectant is highly effective and kills 99.99% of all hazardous germs and bacteria without posing a threat to humans, animals or plants. Sanondaf is proven to kill MRSA, C Dificile, Salmonella, Norovirus, Flu Viruses, Legionella and many other harmful bacteria, viruses and moulds.
For more information, contact: 01236 702028 Email: info@sanondaf.co.uk www.sanondaf.co.uk 24
Spanner Re2 sponsors this issue of
Industry UK
see them on page 8
Smart Access Solutions News
Cable free access control No more problems with lost keys No more constraints with mechanical profiles No more door modification No more bunches of keys
WWW.LOCKEN.EU
Analytix sponsors this issue of
0203 691 1610 Industry UK
see them on page 6
25
Industrial News
Total Waste & Recycling Solutions
Make Your Business
More Efficient
Leading luxury food supplier Harvey & Brockless were looking to improve operational efficiency, reduce waste disposal costs and turn their waste into money. ‘Our staff were spending at least two and half hours a day taking waste cardboard in bins to the compactor outside. We needed to find a better solution to our waste system’ says Warren Kruger, their Business Improvement Manager.
Euro Press Systems Ltd is based in the West Midlands but provides top quality machinery to the whole of the UK. We specialise in the supply, refurbishment, repair and service of power presses and sheet metal working machinery. We can also provide you with statutory reports and inspection reports for power presses and associated accessories. When it comes to machinery, we have you covered • HSG 236 thorough examinations • F2197 statutory press inspections • Scheduled and planned maintenance contracts • Overhaul and refurbishment of press equipment • In-house lifting facilities 7 tonne and 2 tonne • Sales of new and used power presses and associated machinery • Fast and efficient power press service • Free and friendly advice • Competitive pricing.
After meeting Compact & Bale at an exhibition Warren wanted to re-evaluate their waste management process so that the staff could spend more time on their core business and less time on waste handling. Prior to installation of the AutoLoadBaler, staff at the food manufacturer were filling a 35 yard portable compactor full of cardboard and general waste, going to landfill every week. Their operatives were making 15 ten minute journeys a day taking bins outside to the compactor.
Contact us on 01384 410000 Email: sales@europresssystems.co.uk | www.europresssystems.co.uk
After a waste review, Compact and Bale concluded that if Strautmann’s unique AutoLoadBaler was located within the factory, they could bale cardboard quickly and efficiently, reduce labour costs, generate income and divert resourceful
material away from landfill. The unique fully automated design allows operators to prioritise their work day in a more productive manner, allowing them to concentrate on their core business. The machine has been such a success that Harvey & Brockless are looking to replace their other standard vertical baler with a second AutoLoadBaler. Warren says, “The staff now have time to do other cleaning jobs rather than spending all their time walking to and from a compactor to fill it. The AutoLoadBaler works fantastically well in our business: it’s a great concept.” T +44 (0)1732 852244 info@compactandbale.com www.compact-and-bale.com
No More Mess! Wet Waste Solutions APK & RPK Type Wet Waste Portable Compactors Features and Benefits • 37 tonne compaction force maximising loads and reducing transport costs • Self-cleaning press plate reduces maintenance costs and downtime • Self-contained unit eliminates any leaked or unwanted odour
PIN authenticated, hardware encrypted data storage devices.
• No permanent fixings allowing flexible location of machine • World-class German manufacturing • Container sizes between 6-2.6m3
01732 85 22 44 info@compactandbale.com
www.compact-and-bale.com
Solray Radiant Heating & Cooling Solutions Comyn Ching Solray invented radiant heating in the 1920s, and is today’s market leader with the largest range of options and benefits: Clean, maintenance free products - No upkeep required Highly effective - Radiant Effect = Instant heat No air movement - No dust streaks on walls, no draughts, no noise Lower air temperatures - Reduced energy bills; fresher rooms Flat solid plates - No crevices to harbour bugs; healthier rooms Unobtrusive - Use all the walls for teaching, display boards... Longevity - Guaranteed for up to 25 years Flexible - Panels can be easily relocated No boxing in required - Pipework located in void so is always hidden. Many alternatives - Include lights, speakers, PIRs, with or without ceilings Many options - Position in grid, on room edges away from lights, on walls... Panels designed and made in Wales - Installed across UK by our own employees UK family business for 300 years
Please contact us for details Tel: 01792 892211 Email: Sales@Solray.co.uk Web: www.solray.co.uk
26
Istorage sponsors this issue of
Industry UK
see them on page 7
Phoenix Way, Garngoch industrial Estate, Gorseinon, Swansea, SA4 9WF
Industrial News
Technical Textiles for Industry base spanning across many sectors including marine, equestrian, aerospace, military, furniture, clothing and uniforms, safety and many more, and are the number one choice for quality and service. Currently supplying the military and domestic markets, 1stWebbing is the UK & Ireland Agent for Müller Textiles, the leading European manufacturer of 3D Warp Knitted Spacer Fabric, which is sold under the 3mesh® brand name. Best Practice UK is extremely proud to present 1stWebbing with its highly prestigious and industry acclaimed Commitment to Excellence profile. Cooperating with some renowned textile manufactures across the globe, 1stWebbing specialise only in the highest quality materials. Their years of experience in the industry have allowed them to excel in supplying high grade materials according to varying specifications. Today, the company boast a large customer
“We have a strong belief in the value of professionalism and knowledge,” commented Managing Director Tim Stokes. “Our experienced and highly motivated team are ready to deal with your exact demands whenever you need us. We always strive to surpass your expectations for quality, service and reliability. Our service is fast and flexible and guaranteed to suit your needs, whatever they may be.”
company supply standard webbing in a range of materials including Polypropylene, Cotton and Polyester which come in a variety of colours and sizes from 16mm to 50mm in width. Bespoke webbing is also available to suit requirements and, if you require branding or personalised webbing with logos, Jacquard weaving and printing is provided. As well as webbing, the company offers a quality range of Isothermal trolley covers and bags. Designed to keep your goods in pristine condition regardless of where they are left, the Insulated Cover is equipped with unique thermal properties that provide an inside environment, outside. It solves the problem created by shortage of space as there is now no need for goods to remain inside.
at a constant temperature during transport and delivery.
Like the insulated cover, the Isolthermal Bag is designed to keep its contents at the right temperature in the correct environment at all times. It is used for good that need to remain
+44 (0) 1763 245 721 sales@1stwebbing.com www.1stwebbing.com
Conveniently located 30 miles North of London, 1stWebber are within easy logistics reach for all parts of the UK and Europe.
The well-established
No matter what you’re processing – chemicals, food, pharmaceuticals, biomass, wood products – if it produces dusts or powders, there’s a high probability you have an explosion risk. All it takes to interrupt plant productivity is a combustible material, oxygen and an ignition source.
DO YOU KNOW YOUR EXPLOSION RISK?
For more than six decades, IEP Technologies has provided the right explosion protection solution for every type of process application. From cyclones and dust collectors to milling equipment and dryers. We can design a protection system and surround you with 24/7 service and support. Protecting plant starts with knowing your explosion risk.
Thermal Solutions For Industry Insulation Technology: Insulated covers are developed with the customer to protect items which need to be protected in pristine condition whilst outside of the refrigerated area. This cover can help solve the problems created by shortage of chiller space during daily deliveries. Its insulating properties maintain chill products at the correct temperature for many hours whilst outside the chill room. 1stWebbing find bespoke technical textile solutions in all areas of industry. We supply high quality webbings in any size and colour in Polyprop, Cotton, Polyester Nylon, Carbon.
PROTECTING THE WORLD’S PROCESSES AGAINST EXPLOSION
We are specialist suppliers of Spacer Fabric with 650 different grades in the data base. Uses vary from medical to filtration. The many years of experience in this field have lead 1stWebbing to develop a whole range of additional products involving textiles and have had particular success with a range of bespoke logistics products currently in use with mainstream retailers.
Did you also know?
IEP Technologies Ltd Unit 1, Neptune Business Centre Tewkesbury Road Cheltenham GL51 9FB
Please contact 01763 245721 for more details or email sales@1stwebbing.com
Analytix sponsors this issue of
IEP Technologies have been global leaders in providing explosion protection solutions for many years. But we also manufacture a wide range of low cost venting solutions for dust collector, filter, silo, hopper and cyclone producers, including flameless vents.
Call us today on +44 (0) 1242 283060 or visit our website: www.IEPTechnologies.com
Industry UK
see them on page 6
27
Industrial News
The Two-Hand Controller – accident reduction made simple According to the Health & Safety Commission, during the year 2014/2015 there was around 70,000 reported workplace injuries in the manufacturing sector, of which 8,400 were as a result of contact with machinery. Accidents are an unavoidable fact of life; the only thing that we can do is make sure that everything is done to ensure that the systems in-place are capable of keeping accidents to an absolute minimum. Which
Two-Hand Controller was installed, as both hands are needed to simultaneously press two buttons within 0.5 seconds in order to activate the machine. is the thinking behind the IMI Norgren Two-Hand Control Unit launched by Thorite. Injuries as a result of a hand in the wrong place at the wrong time simply wouldn’t be possible if the
The Two-Hand Controller takes the place of whatever was previously used to activate the machine – lever, foot-pedal, button etc., and is easy to install. It complies fully with the latest European Machinery Directive requirements of ISO 13489 and EN574 class IIIB and is totally tamper-proof due to the robust
nature of its construction. The entire unit is delivered complete and carries a two-year warranty. For a limited period, Thorite is offering the Two-Hand Controller at the special launch price of £450. Contact T +44 (0)800 0345850 customerservices@thorite.co.uk www.thorite.co.uk
Warday Premise Limited a beneficial effect on staff, aiding efficiency and improving the healing environment.
Wardray Premise Limited is a long established family run, UK business providing shielding solutions and related accessories Wardray Premise provides the design and installation of: RF (Faraday) cages, magnetic shielding, radiation shielding for Gamma, X-ray, CT and Mammography facilities, lead protective doors and windows and lead protective screens. Wardray Premise has a vast range of accessory products from practical everyday items such as lead protective clothing, patient trolleys and portering chairs through to items that improve the patients’ experience. The ‘Puresound’ audio system, which provides music during an MRI examination, is acknowledged as a relaxation aid for apprehensive patients The Relax &View® Lightboxes are illuminated images suitable for walls and ceilings that reduce the effect of claustrophobia, patient stress and restlessness. Both products have
ProSys Leads the way in Isolator Technology for ADC Manufacture • Automation Expertise including PLC, HMI, SCADA, Batch, GAMP, 21 CFR Part II. • State of the art Manufacturing Facility with ISO 7 (Class C) Cleanroom for Containment Testing • World Class Project Management • Expedited Project Delivery
The Containment Experts for Low Nanogramme Applications
ProSys Containment & Sampling Technology Tel: +353 21 4853900 I Email: info@prosys.ie I www.prosys.ie
28
Istorage sponsors this issue of
Industry UK
see them on page 7
Based on a principal of outstanding customer care, Wardray Premise engineers have extensive experience in medical imaging and have gained an excellent reputation. Wardray Premise provide their customers with first class products and after sales service. T +44 (0)20 83989911 www.wardray-premise.com
Safety Switches News
Analytix sponsors this issue of
Industry UK
see them on page 6
29
Industrial Classifieds The UKs Largest Heating Element Manufacturer
One piece water storage tanks
Our Pumps operate in many different environments and industries and are used in a variety of locations such as sewage and wastewater treatment works, quarries, abattoirs, food processing industry, farms and even Super yachts.
The largest range of one piece water tanks in the uk, from 45 Litres to 97,500 Litres. Precolor is based in Shropshire in the Midlands, this central location allows easy access for delivery of tanks to the whole of the UK.
Leading the way Elmatic (Cardiff) Ltd is the largest manufacturer of Industrial Electric Heating Elements in the UK. Elmatic Ltd have the widest product range to meet our customer’s requirements.
Our range of Ram and Diaphragm Pumps are designed and manufactured to a high standard. They have proven themselves over many years to be robust and reliable. As well as this the pumps are energy efficient, easy to maintain and offer low overall whole life costs.
Available plain or preinsulated.
For more information, contact 01630 657281 www.precolortankdivision.co.uk
Our product range includes: ää Cartridge Heaters ää Mica Insulated Heaters ää Ceramic Knuckle Heaters ää Tubular Rod ää Immersion Heaters ää Air Duct Heaters ää Nozzle Heaters ää Ceramic Core Heaters ää Square Section Heaters ää Strip Heaters ää Roller or Disc Heaters ää Fabrication & Sheet Metalwork.
Visit www.energypumps.co.uk | Telephone 01636 816600
Please telephone 029 2077 8727
Faster, Simpler Surface Testing Solution for Biological Contamination
Email: sales@elmatic.co.uk • www.elmatic.co.uk
• Rapid results typically within 24 hours
• Non-destructive testing allows speciation • Automated analysis reduces errors
we make ideas come to life
• Faster cleaning validation
RMIG’s new recoiling system further improving accuracy and quality
• Personnel and garment monitoring
• Surface monitoring – parts, process and
machinery
RMIG Ltd has recently purchased a new 1,250mm wide recoiling unit. The new unit allows for very accurate and tight recoiling of perforated coils. It is technically a more sensitive method, which makes the perforated material less prone to scratching or damage.
T +44 (0)1223 257704 | M +44 (0)7825 884292 www.emsparticlesolutions.co.uk | www.pmeasuring.com
Contact 01925 839600 or email info.uk@rmig.com Alternatively, visit our website: http://www.rmig.com/en/products
Specialists in Water Storage Tanks Drayton Tanks produces one of the largest ranges of (GRP) Glass Reinforced Plastic water tanks for both hot and cold water storage as well as chemical and other solutions.
Sustaining life in hazardous environments...
This includes tanks for Waste Water, Effluent and chemical storage along with a large range of tanks suitable for Feed and expansion F&E tanks for water up to 70°C. We supply and deliver to the whole of the UK.
0844 915 1111 sales@breathesafety.com www.breathesafety.com
Please visit www.draytontank.co.uk T 0871 288 4213 | E info@draytontank.co.uk
One of Europe’s Leading Analytical Providers Designed to help meet your environmental regulatory requirements, we offer our customers’ accurate, legally defensible, analytical data. Providing our customers with an extensive range of UKAS, MCERTS and DWTS accredited analytical services for water, land and waste monitoring, ALS Environmental is one of the UK’s leading providers of analytical services.
Leading designer and manufacturer of electrical Slip Ring Systems, Underwater Lighting & Camera Solutions and Fibre Optic Rotary Joints (FORJS)
By working with our customers for over twenty years we have been able develop a range of analytical services that meet your specific needs, including standard industry, regulatory and bespoke analytical suites. We are able to respond in a timely and efficient manner to your analytical and sampling requirements, via our network of laboratories and service centres across the UK and Ireland. This network also means we are able to provide customers with additional capacity and the reassurance of back-up laboratory systems.
www.bgbinnovation.com +44 (0)1476 576280 sales@bgbinnovation.com
For more information, please visit: www.alsenvironmental.co.uk Email: info.ukenviro@alsglobal.com • Tel: 02476 421213 ALS Environmental Limited, Torrington Avenue, Coventry CV4 9GU
30
Istorage sponsors this issue of
Industry UK
see them on page 7
Industrial Classifieds
Idea. Prototype. Done. (It’s as simple as that)
How much does screen damage cost your business?
With our automated manufacturing process, we can make 1 to 10,000 parts in 15 days or less. You could call it a game-changer.
Tuffscreen screen protectors; a purpose-designed industrial strength screen protection solution that eliminates damage, downtime, repair costs and lost productivity.
3D PRINTING | CNC MACHINING | INJECTION MOULDING protolabs.co.uk +44 (0)1952 683047 customerservices@protolabs.co.uk
Call us now to save your screens – 0117 9696555
WWW.TUFFSCREEN.COM
As a small company, we’re extremely flexible and can provide a level of service with attention to detail that is unusual in larger companies. Our long and trusted relationship with several manufacturers allows us to influence & work constructively with them to solve challenging problems. We have been specialists in the supply of chemical reactors since 1976.
Please contact us to discuss your project in detail: +44 (0)1227 710274
Visit our website www.kenkimble.co.uk
Analytix sponsors this issue of
Industry UK
see them on page 6
31
Offshore Engineering News
Market leaders in Design & Manufacture Our latest developments include: Active Heave Compensation Winches • Multiple Electric or Hydraulic drives • Variable Speed & Torque • Variable Spooling Gear Synchronisation (Umbilical/wire diameter) • Multiple Brakes (Brake Motor & Disc) • Redundancy in event of drive failure • Compact Design • A-Frames & Launch Systems • Fully Containerised Options available • Slip Ring Assembly • Bespoke Options available • Retrofit Kits available.
Please contact +44 (0)1723 584080 www.nswinches.co.uk | sales@nswinches.co.uk Printed by Iliffe Newspapers • Distributed by C&M Distribution • Tel: 02476 618 455 • www.mediamattersdirect.co.uk