Industrial Centre of gravity case study highlights testing for stability and safety
In today’s world of advanced machinery, robotics, and aerospace engineering, precisely measuring an object’s centre of gravity (CoG) is paramount. CoG, the point at which an object’s weight is evenly distributed, is crucial for stability, performance, and safety.
A new case study from Interface, The Force Behind Accurate Centre of Gravity Testing, highlights the critical role of accurate CoG measurement and showcases how precision force measurement solutions address the challenges of this complex validation and assessment process. The following are key takeaways from the case study and expand on the importance of CoG testing across various applications.
The challenge of precision
The case study illustrates that even the slightest imbalance can significantly affect mission-critical applications. Accurate CoG testing ensures stability and performance, from spacecraft design to advanced robotics. However, achieving the required precision presents significant challenges:
● Complexity: CoG measurements often require precise measurements for critical design and analysis assessments, sometimes in confined spaces or for very large test articles, just as a rocket or grain silo.
● Sensitivity: Minor deviations in CoG results can significantly impact, leading to expensive flaws and, ultimately, failures. Safety is one of the primary reasons for centre of gravity testing.
● Environmental Constraints: Testing often occurs in limited conditions, demanding robust yet miniaturised sensors that don’t disrupt performance. Environmental conditions impacting testing or performance monitoring, such as weather or extreme temperatures, must also be considered.
● Data Consistency: It is critical to ensure consistent and accurate data acquisition during tests. Inconsistent readings can lead to inconsistent CoG calculations and costly mistakes. Pairing your sensor technology with accurate input and output instruments is very important.
Interface solutions for precision centre of gravity measurement
Interface offers advanced force sensor solutions and instrumentation that meet the mandatory needs for accurate and reliable CoG testing. The case study details several examples of how Interface technology is used in diverse applications.
Robotic arm design
Interface recommends a force plate solution using high-performance 3-Axis Load Cells and the BX8 Multi-Channel Bridge Amplifier and Data Acquisition System for robotic arm testing. This setup allows for dynamic monitoring and adjusting the robot’s stability and CoG. As robotics becomes more sophisticated, precise
Robotics control
The case study emphasises the growing importance of CoG testing in robotics. As robots become more complex and are deployed in increasingly diverse environments, accurate CoG measurement is crucial for properly located CoG to prevent tipping and ensure safe operation. Optimising the CoG improves manoeuvrability and precision of movements. CoG testing helps meet safety regulations and prevents accidents.
Interface’s precision load cells, including miniature load cells like the ConvexBT Load Button Load Cell and MBI Overload Protected Miniature Beam Load Cell, are ideal for CoG testing in robotics due to their accuracy, repeatability, and ease of integration. These sensors provide detailed data to optimise robotic performance and ensure safety. Here is a demonstration of a 3-axis load cell monitoring a robotic arm.
Meet HecTARE 1 Video here: https://youtu.be/OmqLNZtDFoo
As discussed in the case study, factors like stability, performance, and safety all hinge on accurate CoG determination. This is especially true in applications like surgical robotics, where haptic feedback and precise movements are essential.
Rocket test frame for centre of gravity testing
In aerospace, Interface’s 1200 Standard Precision LowProfile™ Load Cells, integrated into a rocket test frame and coupled with the 1280 Programmable Weight Indicator and Controller, provide the precise measurements needed for CoG calculations, ensuring stability and safety during launch.
Crew module centre of gravity testing
The Interface WTSSHK-B Wireless Crosby™ Load Shackles provide a reliable solution for
weight distribution and calculating CoG for spacecraft crew modules, ensuring balance and meeting stringent safety standards.
Aerospace applications rely heavily on accurate CoG measurements. Similarly, understanding the CoG is crucial for ensuring the stability and integrity of buildings, bridges, and other structures in structural engineering. CoG monitoring can prevent catastrophes and optimise material management even in seemingly simple applications like tank weighing. For tank weighing, Interface’s A4200 and A4600 Weigh-Check Load Cells help monitor material levels and CoG, optimising load distribution and ensuring safety.
Interface’s case study demonstrates the critical role of accurate CoG testing in various industries. By providing high-precision force measurement solutions, Interface empowers engineers to ensure stability, optimise performance, and enhance the protection of people, products, structures, and environments in applications.
As technology advances, the demand for precise CoG measurement will only grow, making Interface’s solutions an essential tool for innovation and progress. Contact Interface today to learn more about its solutions for centre of gravity measurement projects, including its range of load cells, sensors, and data acquisition systems.
Centre of gravity testing – find out more Get in touch if you’d like us to help with your latest project.
Interface Force will be attending Smart Manufacturing Expo at Stand 5-C110 at the NEC, Birmingham from 4th-5th June, don’t miss it!
T +44 (0)1344 776666 info@interface.uk.com https://interfaceforce.co.uk
CoG measurement becomes even more critical.
John Mayes Engineers
UK Manufacturers and Stockists of pipe fittings 3,000lb, 6,000lb in stainless, duplex, super duplex and nickel alloy steels. Mostly European origin materials. Fast turnaround. Design. Pressure Testing. Non Destructive Testing. Coded Welding. CNC machining. Full ERP system.
Industries served… Chemical, Refining, Power, Medical, Water….
Contact Mr John Jones, john.jones@mayes-uk.com https://www.mayes-uk.com
European Corrosion Supplies
UK Manufacturers and Stockists of all manner of coupons and electrodes for fluid analysis. Applications include pressurised pipe systems for Oil & Gas, Water and Chemical industries. Materials range from Aluminium’s to Nickel Alloys to Polymers.
Contact Mr. Alex Archer, alex@europeancorrosion.co.uk
A-SAFE celebrates 40 years of leadership in workplace safety innovation
A-SAFE, a global leader in workplace efficiency and safety solutions, marks its 40th anniversary this year, celebrating four decades at the forefront of industrial safety and efficiency.
A-SAFE’s journey epitomises a great British manufacturing success story, from its roots as a visionary family business to its evolution into a global powerhouse. Under the leadership of brothers James and Luke Smith, the business has experienced exponential growth. The company has expanded from a pioneering team of 20 to a global workforce of 750, with a commanding presence in over 65 countries.
A-SAFE’s commitment to pioneering innovation continues with its recent advancements in Industry 4.0 technologies. The company has already introduced IIoT-enabled products that provide data-driven insights, further enhancing workplace safety and operational efficiency with a host of new launches planned over the next 12 months. The company was also instrumental in helping to establish PAS 13, the globally recognised testing methodology for industrial safety barriers.
As A-SAFE looks to the next milestone, it plans to remain committed to its roots in British manufacturing excellence, while continuing to export its innovative solutions worldwide.
For more information about A-SAFE and its innovative workplace safety solutions, please visit: www.asafe.com
Transforming Fire Safety in the Desert: Hochiki Ekho at Outpost Al Barari
Outpost Al Barari, a luxurious desert retreat nestled in the remote expanse of Qatar, presented a unique challenge for fire safety. The resort’s vast, everchanging layout, coupled with the harsh desert environment, rendered traditional wired fire alarm systems impractical. To safeguard guests and staff in this extraordinary location, Fire Cloud Qatar implemented a ground-breaking solution: the Hochiki Europe’s Ekho hybrid wireless fire detection system. Here we explore how this innovative technology overcame significant hurdles to deliver unparalleled fire protection in this challenging environment.
Outpost Al Barari is a luxurious resort nestled in the heart of Qatar’s breathtaking desert landscape. Surrounded by towering sand dunes and the vast expanse of the Inland Sea nature reserve, it offers a unique escape from the bustling world. A haven for those seeking a truly authentic desert adventure
combined with world-class hospitality, The Outpost describes itself as a place where guests can disconnect from the outside world and reconnect with nature.
Whilst guests are enshrined in luxury, the surrounding harsh desert climate can cause significant shifts in sand dunes, potentially affecting the layout of the resort. It is for this reason the resort uses temporary structures to minimise its own impact on the surrounding natural environment. This however, presented a formidable challenge for traditional fire alarm systems; to address this, the management sought the expertise of Fire Cloud Qatar, a leading fire safety solutions provider in the region.
Learn more about the Ekho products used in this project.
Visit: www.hochikieurope.com
Self-contained emergency showers
Aqua Safety Showers are a major UK manufacturer of self-contained safety showers. These vital pieces of site equipment help your staff, contractors and visitors stay safe from the effects of harmful chemicals in emergency situations. Our emergency showers are ideal for any location, even sites without suitable plumbing.
Built to withstand robust conditions and designed to be highly visible day or night, a self-contained emergency shower gives you peace of mind that you are meeting with the required health and safety regulations. A selfcontained emergency shower will deliver tepid water continuously, allowing full-body rinsing. Many optional extras available to suit site requirements.
We also offer a range of self-contained eyewash stations for emergency eye washing.
Explore our full range of products on this website and please feel free to contact our team if you have a technical or product selection question or would like a quote.
Get in touch today via: sales@aqua-safety.com or call: 01942 318096.
Dräger sponsors seven marathons across seven continents for ‘Fire Angel’ challenge
Dräger is donating self-contained breathing apparatus (SCBA) and helmets to the ‘Fire Angels,’ two female firefighters who will be attempting seven marathons, in seven days, across seven continents – while wearing firefighter kit – as part of the ‘Great World Race.’ The challenge is a part of their ongoing ambition to ‘change the narrative of what it means to be a girl.’
The intrepid pair have already successfully skied across the Antarctic, pioneering a new route, in 52 days, 10 hours and 30 minutes.
The marathons are planned for a seven-day period in November, in the following sequence: Wolf’s Fang (Antarctica); Cape Town (South Africa); Perth (Australia); two in Istanbul (one in Asia and the second in Europe); Cartagena (South America); and Miami (North America).
Dräger is donating two PSS® AirBoss SCBA with Nano Compressed Air Cylinders as they offer best in class ergonomics and are incredibly light. The donated helmets will be from the HPS® SafeGuard range, which at just 1.25kg in its basic configuration, provide optimal protection with the highest levels of wearer comfort.
The Fire Angels will base themselves on Dräger’s stand for September’s ESS show. To find out more about the Fire Angel’s endeavours and achievements, and how you can support them, click here
Click here to find out more about PSS® AirBoss SCBA and here for the HPS® SafeGuard range.
Visit: https://www.draeger.com/en_in
Cambion Electronics ahead of the
Accomplished history
Cambion Electronics has a long pedigree in manufacturing high-performance electromechanical and inductive components, with an illustrious history dating back decades. Back in 1961, the company was known as Cambion Electronic Products Limited successfully incorporated by USA company, Cambridge Thermionic Corporation. The aim then was to become a big player in the emerging market for electro-mechanical and electronic components in the UK and Europe.
Cambridge Thermionic Corporation was an unfortunate victim of the infamous 1990-1991 US recession and became insolvent. The UK experienced a similar economic downturn in 1991, with rising inflation, high interest rates, and overvalued exchange rate but despite this, Cambion UK continued to thrive as a single
entity. Over the years, there has been a series of ownership and name changes, including Midland Ross, Interconnection Products, Hollingsworth, Wearnes, until 2016 when it finally became Cambion Electronics Limited, as it is known today.
Pole position
Cambion Electronics Limited is now part of a highly successful multi-billion-dollar conglomerate based in the Far East (Singapore), with a sole, autonomous 4,000 square metre manufacturing facility in picturesque Castleton, in the Peak District.
Cambion is autonomous in its manufacturing capabilities with stamping, machining, moulding, automatic assembly and an equipped toolroom all under one roof at its ISO9001, ISO14001 and AS/EN9100 certified North Derbyshire facility.
With a steadfast focus on innovation, worldleading products, customer service and sustainability, the company has maintained its pole position as industry-leading designer and manufacturer of high-performance electromechanical/electronic components, inductive assemblies, and interconnect solutions. Now, with an expanding global distribution network, Cambion is at the forefront of the electronics sector, with a diverse customer base across aerospace, civil aircraft, gas detection, industrial markets, oil & gas, medical, military and many others.
2024: Year in review
We caught up with Managing Director, Martin Stoneman, to see how the company has fared against a difficult geopolitical backdrop, supply chain delays, soaring energy costs and new UK Government, “Challenging is the single word that sums up the last year. Moving into 2024 it was clear that there were stormy clouds on the horizon, however Cambion results will be favourable when compared to like companies in the electronics industry, certainly those in the UK. Factors out of our control such as geopolitical issues not only effect the value of commodities like gold, but also the confidence of our customers. This stated I can already see green shoots appearing for 2025 and expect to have growth; whether it will surpass our record-breaking turnover of 2023, only time will tell.”
All that glitters is gold
Historically, gold has been the standard material to protect products used for joining electrical circuits, due to its inherent electrical conductivity properties and corrosion and wear resistance. The price of this precious metal has increased by more than 40% this year, with prices set to hit an all-time high in 2025, as Martin explains further:
“Gold has historically been seen as a ‘safe haven’ in time of troubles, so the rise in this commodity, caused by the geopolitical issues has been a major concern for Cambion. Trying to mitigate this against productivity has been a battle difficult to win, then when you add government legislation and tax burdens into the mix, it is one you know you cannot win, so price increase becomes unavoidable, which clearly creates risk. Cambion will continue to invest heavily in capital equipment though to improve productivity, and cutting-edge AI without losing sight of direct customer and supplier interface and its employees to upskill and develop new competencies to meet the changing environment.”
Despite these setbacks with the price of gold, Cambion continues to focus its R&D on additional contact technologies to ensure Cambion supports its customers’ future application developments. The company is busy implementing ongoing Net Zero plans,
such as improving systems and practices to eliminate waste. Cambion continues to strategically focus on ongoing product development, invest in the latest machinery and nurture organic growth in its customer base, through its excellent distributor network.
Innovation at Electronica 2024
Electronica is a leading biennial electronics trade show and Electronica 2024 in Munich brought the whole industry together for four days. Cambion launched its new contact technology for high current applications:
the pack in electronics industry
Louvered Sockets/Pins at the November show, which were greatly lauded by visiting industry delegates.
The sockets are ideally designed for highcurrent applications, due to its multi-point manufacturing from heat-treated Beryllium Copper. Plated in gold, silver or both, these sockets come in various terminations, solder bucket, crimp, and thread mount.
“Our Louvered Sockets/ Pins received wide interest from all points of the globe during Electronica 2024 – giving excellent potential for growth in 2025 and beyond. We also exhibited our other leading contact technologies such as: Spring-Loaded Contacts, Tulip Clip and Hourglass Jack contact. With instantly recognisable sockets, connector pins, terminals, insulated/uninsulated chokes, and coils, it was our pleasure to make contact with many new and existing customers and peers from across the industry. The year has also seen a successful take-up of the previously launched non-magnetic and relay base ranges.”
Non-magnetic range
mount and stackable. These sockets are compatible with mating pin Dia. Ø0.412.06mm for seamless operations.
● Pins: Compatible with loose piece sockets, providing positive and lasting electrical connection with low contact resistance. Pin diameters are +/- 0.05mm (0.002”).
● Polygon pins: Available in various stand-off heights, a range of machined pins allow for press-fit termination to PCBs.
● Terminal: Wide range of slotted, forked and pin styles in varied sizes for standard board thickness. Available in insulated/noninsulated variations.
● Shorting links: Insulated and non-insulated links as standard come in colours: red, blue, and black, with other colours available upon request. In the following Pitch –2.54mm (0.100”) to 12.7mm (0.500”)
In the medical sector, normal free machining grades of brass contain slight magnetic properties, with small traces of iron and nickel composition. This of course makes them highly unsuitable for MRI scanners or indeed industrial application such as Mine Detection Equipment. Cambion has taken care to use the latest advanced Magnetoscope technology to monitor magnetic permeability, whilst remaining mindful of raw material and plating selections.
Relay Base range
A range of lightweight Relay Bases utilising Cambion’s Tulip contact technology to suit generic round pin out configuration Relays: Available with and without mounting ears for optimum location possibilities.
Pins have a solder relief feature to ensure excellent solder fillets when fixed to PCB.
● Carrier is moulded from hightemperature plastic, suitable for lead-free solder processes.
● Carrier ensures correct contact pitch.
● Contacts feature Gold plated, stamped Beryllium Copper clips, pressed into Brass, Gold plated bodies.
● Other styles and configurations available on request
● RoHS compliant
Looking to the future
As the industry moves towards Net Zero 2050, Cambion has accelerated its company goals by announcing that all company vehicles are now fully electric. With the looming 2030 UK ban on all new petrol and diesel cars, Cambion is helping employees convert cars to electric through a salary sacrifice scheme. The on-site free EV charging stations support the running of these cars, with the long-term goal to run the EV charging car park purely on renewable energy sources.
The non-magnetic range has undergone extensive R&D, with its sockets, pins, polygon pins, terminal and shorting links all making waves across the industry:
● Sockets: Extensive range of discrete sockets available in mounting styles such as: soldered, press fit, crimp, surface
“With Cambion’s product range, our R&D team is looking at advanced additional contact technologies to futureproof customers’ application developments.”
For more information and to view the product brochure, see the links below: T 01433 621555 sales@cambion.com www.cambion.com
Insurance made easy for Tree Surgeons and Foresters: Why 3,500+ trust Arborisk
For over 80 years, Bartlett Group, a family-owned financial services intermediary and advisor, has operated independently, upholding a commitment to excellence towards businesses, charities and individuals in over 40 countries.
In the last four years alone, Bartlett has been named UK Broker of the Year, Commercial Lines Broker of the Year, London Market Broker of the Year, and in 2024, Bartlett ranked in the Financial Times Top 100 UK Advisers.
Bartlett is the parent company of Arborisk, a specialist insurance provider serving the Tree Surgery and Forestry sector since its founding in 2009. Trusted by clients ranging from small family-run businesses to some of the UK’s largest independent timber harvesting providers, Arborisk has earned a reputation for outstanding customer service, expert advice, and a high success rate on claims – reflected in its 90%+ Excellent rating on Trustpilot.
One customer stated, “The customer service I have received from Dan and James (Arborisk) is excellent. Professional in every aspect and thorough in their
explanations. I would highly recommend,” Harry Adams – Dedham Vale Tree Surgery.
Providing insurance for tree surgery, forestry, landscape gardening, and arboriculture, Arborisk make insurance hassle-free with no forms to complete and straightforward, tailored coverage.
Whether you’re looking for Public and employers’ liability, Own tools/equipment, Hired-in plant, Personal accident cover, Legal expenses, Professional indemnity, or Motor insurance (covering single vehicles to fleets, with flexible driving restrictions and modified vehicle cover available), Arborisk can help to protect your business with the best and most secure insurance cover for your needs.
Choosing Forestry Insurance with Arborisk means gaining peace of mind, allowing you to focus on growing your business. Areas covered include Timber harvesting, Timber extraction, Mechanised and manual felling, Vegetation clearance/management, and Woodland management. Their added-value features include no admin fees, no height restrictions, no proposal forms to complete, access to Aviva Risk Solutions, and flexible payment options – allowing you
to pay your annual premium in full or through monthly instalments.
Arborisk has recently launched its new Benefits Hub – a dedicated platform designed to give back to customers with exclusive perks and savings. Enjoy special discounts on shopping, travel, dining, and more, all in one easy-touse portal. With access to rewards, cashback on selected purchases, and a simple way to manage your benefits, the Benefits Hub helps you make the most of your money while Arborisk continues to support your business.
Arborisk is THE place for 5* insurance cover for Tree Surgeons and Foresters, covering all aspects of work undertaken from ground clearance to harvesting and extraction.
Join the 3,500 tree surgeons and forestry firms that trust Arborisk to protect their business. Find out more below.
T 0113 259 3560 enquiries@arborisk.co.uk https://arborisk.co.uk
Mind the gap: How forestry and arboriculture employers can respond to the growing skills shortage
Skills shortages are becoming increasingly critical in the forestry and arboriculture sector. As experienced workers retire and fewer young people enter practical, outdoor trades, the pressure on employers to maintain a skilled and safe workforce is growing. But with the right training in place, businesses can stay resilient –and play a vital role in shaping the sector’s future.
What’s happening?
Across the UK, forestry and arboriculture employers are facing significant recruitment and retention challenges. Demand for skilled professionals in tree work, woodland management, and vegetation control is rising –driven by growing environmental targets, urban greening, and safety requirements around highways and public spaces.
At the same time, there’s increased government focus on tree planting, biodiversity, and net-zero carbon goals. This creates new opportunities but also increases the urgency for a trained, competent workforce to carry out this work safely and sustainably.
From chainsaw operation to advanced tree climbing and felling, the skills required are specialist – and not easily replaced. Employers who invest in training now will be better equipped to meet both current and future demand.
What employers can do
This is the time to act. Start by reviewing your current workforce: What skills are in short supply? What roles are hardest to fill? And what expertise will you need more of in the next few years?
Investing in accredited training helps improve safety, boost efficiency, and retain valued staff. Qualifications that meet recognised industry standards are not only good for business –they also give your team the confidence and competence to work to best practice.
Look to partner with training providers who understand the physical and technical demands of forestry and arboriculture work. And when recruiting new staff, consider creating clearer development pathways – particularly for younger entrants –through modular or progressive training options.
Where Lantra fits in Lantra has over 40 years of experience providing expert-led, practical training in forestry and arboriculture. From essential chainsaw skills to specialist tree climbing, equipment use, and risk assessment, our courses are designed to meet real-world needs.
With a strong UK-wide network of approved providers, we help employers build teams that are skilled, confident, and compliant.
Build a Skilled, Confident Team
Want to grow a team ready for the future of forestry and arboriculture? Visit: www.lantra.co.uk to explore our training solutions or speak with our team.
Fleet & Freight Management
CheckedSafe: Revolutionising compliance & safety
Multi-award-winning CheckedSafe is unique in the fact that its software was developed to provide simple and inexpensive compliance solutions that can be tailored to any industry. Combining a dedicated team of developers and client account managers, CheckedSafe provides comprehensive compliance services across several platforms, including commercial and plant hire vehicles, complete fleets, and vehicles in the utilities sector.
CheckedSafe is a trusted partner of several wellknown brands, including Enterprise, HITACHI, QBE, and Northgate. The company was founded by Gary Hawthorne and Darran Harris, both of whom bring extensive expertise to the industry. Darran specialises in litigation, compliance, and road traffic incidents, while Gary holds multiple prestigious credentials, including Fellow status with the Chartered Institute of Logistics and Transport, the Society of Engineers, and the Institute of Road Traffic Engineers. He is also a Commercial Mediator and a DVSA Accredited Earned Recognition Auditor.
Its primary offering is a paperless compliance system that facilitates efficient defect reporting and fleet maintenance. This innovative software is also compliant with the DVSA Earned Recognition scheme, enabling you to prove with ease that your vehicles, drivers, and operations meet all necessary standards, thus reducing the likelihood of your vehicles being stopped for roadside inspections.
From the office, managers can monitor user activity, view comprehensive maintenance reports in real time, identify outstanding tasks and vehicle defects, and schedule services to remain fully compliant. Comprehensive reports include all details relating to checks and their outcomes, including historical checks, and the system is completely secure as all data is sealed from editing, providing an end-to-end detailed audit trail. What’s more, with the innovative scheduling system, you have full visibility over the status of your vehicles, enabling servicing and maintenance to be scheduled accordingly, allowing you to digitalise your wall planners.
This software is suitable for checks on HGV walkarounds, daily van checks, vehicle pre use, FORS, plant & equipment, and forklifts, and can be tailored to create a template for ANY piece of equipment you might have.
For the drivers, a brand-new app – GB Domestic Hours, is a completely digitised upgrade to the paper log books, allowing drivers to record and manage their drivers’ hours directly from their smartphone.
CheckedSafe is the only UK company to develop and launch the GB Domestic Hours app, bringing marketfirst technology to UK vehicle fleets. CheckedSafe’s portfolio of compliance tools – that includes the much-celebrated Driver Licencing Checks, priced at an unbelievable £1.60 per check and Fleet Management Software – enables fleet managers to efficiently oversee fleets of any size fully digitally – eliminating the need for cumbersome paperwork.
In addition to vehicle compliance, CheckedSafe provides a Lone Worker App designed to enhance the safety of employees working alone. This app allows lone workers to log their location and complete risk assessments, ensuring employers can monitor their safety effectively.
Ideal for those who work outside of normal working hours, are remote from a central office, or even for those who are not in frequent contact with their employer, the CheckedSafe Lone Worker App and monitoring suite is the number one App for employers to ensure the safety of their employees.
Offering a completely customisable experience, the system boasts an extensive library of DVSA, HSE, Puwer, Loler, and UK Border Force check templates, all of which can be tailored to suit the specific requirements of your business. What’s more, if a driver has no signal, defects can be conducted from anywhere at any time. This is because all failed vehicle compliance checks will automatically generate a report which is stored in CheckedSafe’s secure CMS, ready for further analysis.
Gary Hawthorne, Director & Co-Founder mentioned, “Fleet managers can now oversee any size fleet with mobile phones, rather than copious amounts of paperwork (a laptop is useful to interrogate the data). There is no need to store huge boxes of reports, plus it’s all in real-time so any defects/issues can be resolved quickly, reducing overall long-term costs and reducing downtime as better repair planning can be achieved.”
All of this can be achieved for just £1 per vehicle per week. Just think, how much more efficient your business could be if your employees could carry out customised vehicle checklists via a downloadable app – even when drivers are off-grid!
CheckedSafe is exhibiting at two shows this year: The Commercial Vehicle Show on the 29th April-1st May 2025 at Stand: 4A21
Road Transport Expo on the 24th-26th June 2025 at NAEC, Stoneleigh at Stand Location: Green – Hall 2 Stand: GR1.
To find out more about CheckedSafe or to access the 30-day free trial, please contact below: T 01282 908429 info@checkedsafe.com www.checkedsafe.com
Expanding efficiency: Introducing Samskip Spain’s new
crossdocking facility
Samskip Spain is proud to announce the launch of our state-of-the-art crossdocking facility in the port of Santander. This 1,000 sq. m. facility, just 5 minutes from the terminal where our vessels operate, is designed to streamline operations for palletised cargo (both dry and reefer pure crossdocking) and offer faster, more efficient service to our customers. With this new facility, we can now easily handle complex logistics and provide quicker access to the hinterland, where rail connections are still being developed. In the future, we aim to expand the facility’s capabilities to accommodate all types of cargo, including out-of-gauge, and will soon install fixed loading docks to further optimise the process.
Key benefits for customers:
● Proximity: The facility’s close location to the terminal ensures rapid loading and unloading, reducing transit times.
● Versatility: Capable of handling various types of cargo with plans to expand.
● Strategic expansion: By building our presence in this critical region, we’re able to better serve customers who operate beyond current rail connections.
● Growth potential: As our business grows, so will the facility’s capacity, ensuring long-term value for customers.
At Samskip, we continuously strive to enhance our logistics solutions. This new cross-docking facility is part of our commitment to offering more reliable and efficient services, designed to meet the evolving needs of our customers. We’re here to help your business grow with seamless, innovative solutions.
For more information or rates, please contact us at: sales.spain@samskip.com or visit: www.samskip.com
FleetCheck enters market for large fleet software with CV Show launch
FleetCheck is launching a product specially designed for the large fleet sector for the first time at Commercial Vehicle (CV) Show 2025.
Called FleetCheck Enterprise, the fleet management software platform is aimed at corporate users, vehicle leasing companies and other major operators.
Developed from existing core FleetCheck technology, it adds features including bespoke workflows, custom integrations and enhanced service level agreements, plus access to high level management expertise.
Peter Golding, managing director, said, “Historically, we’ve tended to be known for our success in the smallmedium fleet sector but the truth is that we’ve always successfully supplied systems to larger operators and have huge expertise in this part of the market.”
“What we have seen in the last couple of years is an increase in this kind of business, with noticeably more demand for our technology and expertise among these bigger users, especially when it comes to replacing older, complex legacy systems.”
“With FleetCheck Enterprise, we essentially formalising our offering in this sector with a product that is suitable for almost any large fleet scenario.”
Peter explained that the delivery of platforms in the large fleet sector was based around factors such as customisation, service, integrations, advanced business intelligence and reporting, and use across multiple departments such as fleet, finance and human resources.
More details can be found at: www.fleetcheck.co.uk
Kernow Oils, Castrol Ambassador Distributor: Your trusted supplier for all your commercial vehicle lubricants
The right engine oil plays a critical role in maintaining the efficiency and longevity of commercial vehicles.
Castrol’s advanced oils, including the Castrol Vecton product range, incorporate ‘System 5’ technology, designed to optimise the performance of modern engines and maximise fuel efficiency. This technology actively adapts to the needs of the engine, offering enhanced protection against wear and sludge build-up, even under the most extreme driving conditions.
Castrol Vecton oils provide exceptional long-term performance, reducing the frequency of oil changes and maintenance, which leads to significant cost savings for fleet operators. With ‘System 5’ technology, these oils help to improve fuel economy, extend oil drain intervals, and reduce the risk of engine downtime, making them
the ideal choice for heavyduty trucks, vans, and other commercial vehicles.
“The benefits of Castrol Vecton with ‘System 5’ technology are clear – reduced maintenance, longer engine life, and enhanced fuel efficiency,” said Mark Jones, Marketing Manager at Kernow Oils. “We’re proud to offer this innovative product range to our customers, providing them with the ultimate solution for reducing operating costs and optimising fleet performance.”
For more information or advice on Castrol Vecton and other Commercial Vehicle Oils, or to discuss how Castrol products could save your business money, please visit: www.kernow-oils.co.uk
Contact Kernow Oils, T 01736 757002 info@kernow-oils.co.uk
Are stock deficiencies costing your business?
A lack of inventory control can drain productivity by delaying and disrupting customer fulfilment. In this article, Kiran Soni, managing director of inventory management specialist RGIS (pictured right), explains some of the simple steps you can take to regain control and boost productivity.
Can you confidently say that you have complete control over your inventory?
In most cases, the honest answer is, ‘no’ and at some point, your company has probably experienced a loss in earnings due to being unable to find a part in the warehouse or discovering last minute that you have far fewer parts on the shelves than you need for a production run.
Across all aspects of industry, not having the right parts at the right time can cause significant issues. For manufacturing and engineering operations, downtime on assembly lines or production cells can spell disaster. For public transport operators, it means cancelled or delayed services, while simply being late with a delivery can cost money for logistics companies. In addition, there are unseen overheads such as having to alter production plans and time spent wasted trying to find a part in the warehouse.
Ultimately, inventory management might not just cost time and money, but in a sector with tight margins, it can be the difference between success and failure. It can lead to not just losing a sale but losing a customer. At RGIS, we have been helping businesses to address these issues for decades. Here are some of the quick wins you can implement to significantly improve inventory control:
are reordered to ensure the business meets customer demand.
3)
Stock accuracy audit
A full audit of your warehouse is a vital element in inventory control. It can verify inventory levels, giving you the data you need to make informed decisions about where to focus your efforts next. For example, a stock accuracy audit can validate the accuracy of the picking process or identify issues that need addressing.
Where to start
1) Delivery checks and audits
Implementing better delivery checks and auditing pick accuracy give you better insights at every level, from stock arriving in the warehouse to when it leaves. For a start, this can minimise stock shrinkage, which is the difference between recorded inventory and actual inventory. By identifying precisely where and why shrinkage occurs, you can understand how to prevent it.
You might find that it is a simple case of human error. Warehouse teams might be miscounting goods in or assigning them to the wrong location.
2) Replenishment process review
Most businesses can’t afford to hold inventory of every line item, commonly known as a stock-keeping unit (SKU). This means that replenishment is a constant balancing act between cash flow and warehouse costs versus the risk of missed sales if a SKU is not in stock. Fundamentally it is ensuring that the right stock items
The challenge faced by most companies is that they do not have the human resources to implement any of these initiatives. However, you can still reap the benefits by partnering with a stocktaking expert like RGIS.
Key benefits
There are several benefits to outsourcing your stock audit. Outsourcing an inventory check means that your facilities are not impacted by the reduced output associated with displaced staff. You’re not having to take people away from their ‘day jobs’ to spend hours or even days on a stock take. Furthermore, the team conducting the check are experts – this is their day job, so they’re very experienced and capable. This means it often does not take as long as you think, minimising disruption to your business.
For further details on how RGIS can help manufacturing and industrial facilities save time and money on stock checks, please visit: https://www.rgis.co.uk/ stocktaking/manufacturing-and-warehouse/ manufacturing-and-industrial-stocktaking
KLN Freight: A new chapter for Kerry Logistics
We are excited to announce that Kerry Logistics UK is now operating under a new name; KLN Freight. This rebranding marks an important milestone as we officially transition to KLN Logistics Group Limited. The change is more than cosmetic; it reflects a strategic shift designed to unify our global presence under a stronger, more cohesive brand identity.
As KLN Freight, we reaffirm our unwavering commitment to delivering dependable, highquality logistics solutions. This new identity represents not just who we are today, but the company we aspire to be; innovative, agile, and consistently focused on empowering our customers to succeed in a rapidly evolving global market. Our brand refresh reinforces our position as a trusted partner in the logistics space, while also opening the door to exciting new growth opportunities.
This transition represents an evolution in how we serve our customers. We are now a more independent and forward-looking logistics
provider, better equipped to respond to the diverse and changing needs of businesses around the world. Our goal remains the same: to help our clients achieve operational excellence by providing tailored logistics solutions built on efficiency, reliability, and cost-effectiveness.
KLN is an Asia-based, global 3PL with a highly diversified business portfolio and extensive coverage in Asia. We offer a broad range of supply chain solutions from integrated logistics, international freight forwarding (air, ocean, road, rail and multimodal) and e-commerce to industrial project logistics and infrastructure investment.
With a global presence across 59 countries and territories, KLN has established a solid foothold in half of the world’s emerging markets. Our diverse infrastructure, extensive coverage in international gateways and local
expertise span across the Mainland of China, India, Southeast Asia, the CIS, Middle East, LATAM and other locations.
We invite you to connect with our team and learn more about what KLN Freight can do for your business. Visit us at Multimodal, where we’ll be showcasing our services and meeting with customers and industry partners. You’ll find us at stand B6 on the BIFA Pavilion; we’d love to meet you and explore how we can support your logistics needs.
As we embrace this exciting new chapter, we thank you for your continued trust and support. The name may have changed, but our commitment to excellence remains stronger than ever.
T 0161 873 8777
uk.customerservice@kln.com www.kln.com
Derry Bros and Digicom celebrate 5 years at Multimodal with Award-Winning Services and Ground-breaking Automation
Derry Bros and its digital sister company, Digicom, are proud to mark their fifth consecutive appearance at Multimodal, the UK and Ireland’s premier supply chain and logistics event. Over the past five years, Derry Bros and Digicom have become key fixtures at the exhibition, renowned for their leadership in customs clearance and digital innovation.
Established as one of the most trusted customs clearance providers across the UK, Ireland, and EU, Derry Bros has built its reputation on speed, accuracy, and roundthe-clock service. From Import and Export declarations to Transit movements and Ched/ IPAFF processing, Derry Bros provides a seamless experience for freight forwarders, hauliers, traders and logistics firms navigating increasingly complex customs environments. Their services have won numerous industry awards for excellence, reliability, and customer support.
Complementing Derry Bros’ operational expertise is Digicom, the digital powerhouse behind a new era of customs automation. Developed in-house, the Digicom Customs platform leverages cloud-based technology to bring intelligent automation, real-time visibility, and streamlined document management to the customs process. It dramatically reduces manual input, improves compliance, and
speeds up clearances – empowering clients to focus on growth, not paperwork.
At Multimodal 2025, the two companies will showcase their fully integrated customs and digital services. Visitors to the stand will experience firsthand how Digicom’s platform is enabling smarter supply chains, reducing
delays, and eliminating costly errors. Highlights will include live demos of the Digicom dashboard, Automated CHED creation and more.
“Multimodal has become an important stage for us to connect with partners, showcase our technology, and share the progress we’ve made,” says Colin Robb, Head Of Operations, Derry Bros. “To be here for the fifth year running is a reflection of the trust our clients place in us and our ongoing mission to simplify and digitise the customs journey.”
Derry Bros and Digicom invite all attendees to join them at Stand 3033, from June 17th-19th at the NEC Birmingham, to explore how their award-winning blend of service and technology is setting a new standard for customs and logistics.
Contact T +44 (0)28 8778 4949 https://derrybroscc.com
The power of global potential
In the shadow of escalating tariff wars between the United States and China, a new landscape of global trade is emerging. This shifting paradigm represents not simply disruption, but the unlocking of untapped global potential for nations positioned to adapt. The UK, standing independent of EU trade policies postBrexit, finds itself uniquely situated to capitalise on this changing economic chessboard and Magnum Logistics Ltd are a demonstrable example as support to these opportunities.
As Washington and Beijing exchange increasingly punitive trade measures, supply chains are being fundamentally reconfigured. Chinese manufacturers, seeking stable markets beyond American shores, are actively exploring alternative trade relationships. Simultaneously, UK businesses face the imperative to diversify their supply networks and export destinations in this new reality.
This realignment creates immediate opportunities for enhanced UK-China commercial relationships. With Chinese exporters looking to redirect trade
flows away from tariff-affected American markets, UK importers stand to benefit from competitive pricing and preferential treatment. Likewise, British goods may become increasingly attractive alternatives to American products facing retaliatory Chinese tariffs.
“The organisation of shipping, customs and UK domestic movements requires the crucial support of a trusted UK partner.” quoted Chris Gilmore, Magnum Logistics Managing Director. “The nature of our asset-based proposition means that we make solid connections with our overseas partners then control the movements domestically giving clients the assurances their goods are in good hands”
The advantages extend beyond simple trade diversion. This moment offers the UK the chance to establish deeper economic integration with the world’s second-largest economy while maintaining its crucial transatlantic relationship. Strategic positioning becomes paramount – requiring nimble logistics partners who understand both the complexity and opportunity of this moment.
Magnum Logistics, with its strategic operations at London Gateway, exemplifies the kind of forwardthinking infrastructure necessary to capitalise on this shifting trade dynamic. Perfectly positioned to serve UK businesses, particularly those in the Southeast of England, Magnum offers the expertise and global connections essential for navigating new trade corridors between Britain and Asian markets.
“For businesses in Kent, Essex, and Greater London, this proximity to our 24-hour London Gateway hub provides unparalleled advantages in supply chain efficiency. As trade patterns evolve, having a logistics partner with established global networks becomes not merely beneficial but necessary for competitive
Moving freight to and from the UK shouldn’t be a headache
advantage.” stated Eddie Ryan, Magnum Logistics Commercial Director.
Digital connectivity further amplifies these opportunities. Data-driven logistics, predictive analytics, and secured transactions allow even smaller enterprises to participate in this global trade transformation. With proper logistics support, a manufacturer in Maidstone can now seamlessly serve markets in Shenzhen or Shanghai.
The current geopolitical friction between superpowers need not represent a limitation for forward-thinking British businesses. Rather, it reveals new pathways to prosperity for those ready to embrace change and work with logistics partners who understand the power of global potential in this transformed landscape.
Magnum Logistics, exhibiting at this years’ Multimodal 2025 exhibition, stand ready to help UK businesses harness these emerging opportunities, turning geopolitical challenge into commercial advantage through strategic foresight and operational excellence at the critical gateway between Britain and the world beyond.
For more details contact: T +44 (0)1268 554335 hello@magnumlogistics.co.uk www.magnumlogistics.co.uk
Or visit us on Stand E3 at Multimodal 2025 at the NEC, 17th-19th June 2025.
Leaders in international haulage
Kennedy International will be exhibiting at Multimodal 2025 at the NEC in Birmingham on the 17th-19th June at Stand: 1052.
Kennedy International has been revolutionising the transportation industry with its innovative approach to international haulage transport and logistics for over 40 years. As a family run transport company, based in the heart of County Kildare, Ireland, it is ideally located just 30 minutes from Dublin Port to offer a complete haulage service, acting as a one stop shop for all logistical requirements. Kennedy International, also have depots in Newry, Northern Ireland and Liverpool.
Kennedy International brings decades of experience and industry expertise, proudly holding one of the longest-standing histories among Irish haulage companies.
Operating one of the biggest and most modern fleets of vehicles in Ireland, Kennedy International is committed to offering a flexible and comprehensive service at an affordable price.
Their comprehensive range of transport services handle everything from small packages and single pallets to multiple pallets and full loads. Additional offerings include break bulk handling, pick and pack, palletisation, and complete logistics management, overseeing customer goods from their arrival in the country through to final delivery to the end consumer.
For warehousing and distribution, Kennedy offers both indoor and outdoor storage solutions. With adaptable racking and multiple capacities of forklift trucks, they can offer keen rates on both storage and distribution of many packaging types in all types of delivering trailers. They also offer yard space for storage of machines and vehicles, as well as 40ft and 20ft static, onsite containers which can be rented for short or long term, and personal or business use.
All transport services are delivered using the company’s own substantial fleet of over 75 vehicles and over 150 trailers. Each truck is fitted with mobile phones and satellite tracking systems so that they can offer all customers quick response in understanding collection times, delivery times and any other queries.
Kennedy International is fully equipped to meet all your temperature-controlled transport needs with a fleet of over 20 refrigerated units – including straight boxes, meat railers, twin evaporators, double-deck trailers, tail lifts, and undermount gensets. Maintaining precise temperatures from -25°C to +25°C.
Since its founding in 1996, Kennedy International has built a strong reputation as a leader in transhipping. The company offers a full suite of services including container loading and unloading, cross-docking, palletising, and secure storage solutions.
What’s more, Kennedy International and its subsidiary TankTrans Ltd. have vast experience in the carriage of both hazardous and non-hazardous liquids and powders. Tanktrans also hold waste collection permits for all of Ireland, Northern Ireland and the UK. This combined haulage on ro/ro and lo/lo basis amounts to 60 years and is expedited by a large fleet of vehicles and drivers.
For more information, please see below: T +353 1 836 5277 info@kennedyinternational.ie https://kennedyinternational.ie
Clarksons Port Services accelerates growth of customs & freight division to meet rising demand
Clarksons Port Services (CPS) continues to drive forward its strategic investment in the Customs & Freight division, reflecting the company’s commitment to supporting clients amid a rapidly evolving global trade environment. With increasing demand and shifting customs regulations, CPS is scaling up its capabilities to meet the growing complexity of import and export movements.
As trade flows adapt across Great Britain, Northern Ireland, Ireland, the EU, and international markets, CPS remains at the forefront, guiding businesses step-by-step through customs processes. The team ensures clients are not only compliant with the latest regulations but also informed about every change that could impact their operations.
Whether working with large multinationals, SMEs, or individual traders, CPS ensures that all customs declarations are accurate and fully compliant with UK border requirements – delivering peace of mind and operational efficiency.
Sean Maguire, Customs Manager at CPS, explained, “Many of our clients come to us for clarity on customs processes, particularly where responsibilities often fall outside traditional logistics roles, such as within finance teams. Our specialist knowledge positions us perfectly to help businesses navigate this space with confidence.”
He added, “Each member of the CPS team brings expertise and is dedicated to keeping our clients updated with the latest changes in customs rules and global trade regulations.”
Graham Cross, Business Development Manager for Customs & Freight, shared how CPS’ ongoing investment is making a measurable difference, “Our customs clearance services and consultancy offering are already helping many clients streamline their processes and cut unnecessary costs. Through proactive compliance checks, we help businesses verify duty payments and identify areas for savings.”
Located on the Humber – the UK’s busiest trading estuary – Graham and the CPS team are well positioned to support clients trading with EU partners and beyond.
He continued, “Our ambition is clear: to be the trusted logistics partner in the market. With over 50 years of experience, CPS delivers a fully integrated logistics solution through twenty-three strategically placed offices across the UK, Ireland, and the Netherlands.”
Clarksons Port Services wider offering of integrated services includes Port Agency, Vessel Chartering, Crew Change Coordination, Helicopter Operations, Project Logistics, Warehousing & Storage, Bunker Supply, Quayside Logistics Management, Supply Chain Management, Tooling & Supplies, Safety & Survival Equipment and Medical & Rescue services.
To learn more, contact our expert team today: Visit the CPS website: www.clarksons.com, call: +44 (0)7435 946179 or email: graham.cross@clarksons.com.
Efficient, secure, scalable: Discover Destin8 and Declar8 at Multimodal 2025
MCP PLC will be exhibiting at Multimodal 2025 at the NEC in Birmingham on the 17th-19th June at Stand: 3060.
Maritime Cargo Processing (MCP) plc is the UK’s leading port community systems specialist and innovators of Destin8, a Port Community System designed to handle and process large volumes of data and information relating to international trade.
Since 1985, MCP has transformed the way imports and exports move through ports with Destin8 – its industryleading Port Community System. Designed by seasoned industry experts, Destin8 offers a fast, efficient, and cost-effective solution for managing import/export declaration processes. By streamlining data exchange and reducing paperwork, it empowers customers to focus less on administration and more on progress.
Destin8 will collect, store, exchange and distribute data amongst and between in excess of 3,000 users and multiple Government agencies involved in international trade and transport. Operating throughout a multitude of UK ports and inland clearance locations including Felixstowe, Harwich, Ipswich, Immingham, Hull, Teesport, Tyne, Grangemouth, Aberdeen, Greenock, Liverpool, Bristol, Thamesport and Tilbury, Destin8
provides for the electronic exchange of information between all port sectors, including Shipping Lines/ Agents, Port Authorities, Terminal Operators, Customs and other Government Agencies, Clearing Agents/ Customs Brokers and road and rail hauliers/operators. With Electronic Data Interchange (EDI) being used extensively.
Destin8 has been described as a fast, flexible and multi-faceted custom-approved platform, offering a web-based inventory service that supplies real-time information whenever it is required, safe and secure without the paperwork.
What’s more, Destin8 maintains an audit trail of encrypted and commercially sensitive transactions showing what action was taken, when and by whom. The use of enterprise platform tools and object-oriented design makes Destin8 easy to maintain.
No matter the size of your port community, Destin8 has the application infrastructure, to suit every local
Lithium batteries are dangerous goods!
Fingers have often been pointed at lithium batteries after fires on board aeroplanes, ships, and on vehicles. However, whilst they can exacerbate the situation, the cause is highly unlikely to be lithium batteries that have been manufactured, packaged, labelled, stored, handled, and transported in compliance with the regulations.
There is no doubt, though, that a fire could potentially be made worse, and less manageable, by the presence of lithium batteries.
This is because of the high levels of energy that they contain and the difficulty in extinguishing a fire involving lithium – a particularly challenging task in the confines of a vehicle, a ship, or on board an aircraft.
increases uncontrollably to a point where the cells in the battery catch fire, typically with dramatic effects.
Lithium Batteries are classified under the multimodal regulations as dangerous goods. Consequently, if you ship lithium batteries or cells, even the small button types, you will need to have received training.
There is also the risk of ‘thermal runaway’ where the temperature
Labeline International has an online course to meet the minimum requirement for ‘Adequate Instruction,’ and a classroom course to cover batteries that are fully regulated.
For compliant labels, packaging for your lithium battery shipments, visit: www.labeline.com
Labeline International is recognised as the industry’s leading partner for worldwide Dangerous Goods air, sea, road and rail services.
environment. With a pure focus on ever-changing technology and industry movements, the need for a cost-effective and efficient service is vital. MCP provides its stakeholders with a platform that is continually tweaked and enhanced to help them to meet tomorrow’s challenges, today.
MCP has a number of complementary software and applications that can also be useful to those involved in cargo processing and customs.
Declar8 is MCP’s fully developed and tested application for the submission of import declarations into CDS, which is suitable for inventory linked (phase 2) or non-inventory linked (phase 1) submissions. Designed and developed by MCP, Declar8 uses a modern, intuitive and user-friendly design that improves the user experience over CHIEF HCI.
For more information, please see below: T 01394 600205 www.mcpplc.com
Providing instant and unrivalled data insight for your infrastructure
Imagine being able to unlock all of the data you had in your existing infrastructure and compliance documentation. Imagine you had the power to automatically identify if it meets legislative and compliance requirements and allocate actions to rectify any issues.
This is how our unique technology is leveraged to support safety and compliance in multiple sectors at scale. We help you instantly analyse your existing documentation to inform more efficient and more cost-effective processes, while our unique software analysis provides a sharp focus on what your priorities need to be across your stock. Whether it be improving asset performance or mitigating risks.
Paul Meenan is an Asset Manager at large train operator c2c; he
describes TCW as an assurance tool with unlimited power, “This tool has identified lots and lots of things that I may not have had time to look for just because of the nature and diversity of doing dayto-day management of electrical, mechanical, fire systems across a very large railway.”
Learn more about the comprehensive capabilities of TCW software and its many use cases on our website: https://tcwin.co.uk/capabilities
Test, Measurement & Laboratory
Vision Engineering introduces new ‘HALO’ 4K digital inspection microscope
Vision Engineering, a UK based manufacturer of ergonomic microscopy and digital 3D visualisation technology unveils the EVO Cam HALO, a new 4K digital microscope that redefines the standard for clarity, precision and consistency in inspection and measurement tasks.
Suitable for a wide range of inspection applications, EVO Cam HALO combines stunning 4K image quality with advanced, adaptive illumination, and new intelligent software, empowering users to capture the most challenging details with unparalleled accuracy.
HALO’s key features include 4K resolution which reveals previously obscured details with remarkable clarity, ensuring nothing escapes the user’s view. A Super-Wide Dynamic Range ensures the user captures images with exceptional brightness and contrast, even in challenging lighting conditions. Additionally available with HALO comes a new enhanced Illumination package, including a quadrant light, panel light, and white/UV light, to optimise illumination for a variety of inspection needs.
New Intelligent Hardware and Software automatically detects lenses and adjusts magnification settings, ensuring seamless workflow and accurate results. Real-time insights are available providing intuitive image capture, measurement, and analysis tools, enabling faster and more informed decision-making. Vision Engineering’s popular 360 Direct/Oblique Viewer also works with HALO, enabling users to inspect details from different angles, revealing hidden features that would otherwise be inaccessible.
HALO is suitable for a wide range of applications, including Medical Devices Manufacture and testing especially in the practices of inspecting translucent tubes, electro-polished devices, and other medical components with enhanced clarity and accuracy.
It is also effective at capturing fine details on small, reflective metal parts for precise inspection and quality control – perfect for Micro Mechanics. In the
MF-Oxy-Comp
The oxygen sensor MF-OxyComp has been specially developed for use in composting plants. The materials used meet the high requirements of this field of application. The measurement method is based on a dynamic process at two zirconium dioxide slices, which form a hermetically sealed chamber. The entire measuring range is linear.
During operation the sensor system monitors its own function and reports in case of hardware and sensor malfunction.
The calibration is done without reference gas in atmospheric air. The output of the measurement values takes place via an analog (420mA) and a digital channel, the latter transmits the error messages.
The oxygen sensor MF-OxyComp is designed for the measuring range 0.1 to 25 vol% oxygen and equipped with an analog interface with 4-20mA and has a digital output as well.
Contact sales@logidatatech.com www.logidatatech.com
laboratory, HALO cam improve the examination of Petri dishes with translucent samples, enhancing contrast and clarity for detailed analysis, and in Industrial Manufacturing, intricate assemblies, solder joints, and other components are inspected with much improved precision and efficiency.
Pricing and availability:
EVO Cam HALO is available for purchase now, with configurations starting at 6,500GBP.
Commenting on the launch, Paul Newbatt, Group Sales and Marketing Director at Vision Engineering says, “We are delighted to bring EVO Cam HALO to market, confirming our reputation for innovation, whilst improving the inspection performance available within digital microscopy. 4K image quality plus fully controllable lighting and flexible software available in multiple configurations means that our customers in a wide range of sectors can easily choose the most accurate and consistent digital system for their inspection requirements.”
For more information, please visit: https://www.visioneng.com/products/ digital-microscopes/evo-cam-halo
KK Systems: The KDE485 C programmable converter
TCP/IP, TLS, HTTPS and this covers secure comms requirements with X509 encryption and authentication. Config and firmware updates are via USB, and can be accessed remotely via HTTP. There is also a 0-20mA output port, enabling the emulation of 4-20mA sensors.
The Isolated Analog version adds a 16 bit subsystem for sensing PT100, PT1000, all eight thermocouple types, 4-20mA, and voltage.
The KDE485 C programmable converter is intended for rapid development of devices ranging from simple protocol conversion, Modbus interfacing, through data acquisition, telemetry, and all the way to complex products for the IoT market.
The customer is able to leverage inhouse C programming expertise, and the license-free and widely used STM Cube IDE development kit protects his investment by avoiding restrictive practices in software licensing.
The KDE485 is offered in three versions:
The standard KDE485 has Ethernet and four serial ports. The API includes
The GPS-NTP version is intended for factory LANs where the highest security is required, mandating no internet connections, and it delivers GPS time via an NTP server on a user defined IP.
Other options include a 22 bit ADC, and ARINC429 which enables easy construction of products for the aviation and related markets. Other options can be rapidly developed using an internal expansion interface.
The KDE485 is powered from 11 to 28V DC, or 24V DC if its 20V sensor power output is required. The power input is isolated with a 1,500V AC test voltage.
Contact T +44 (0)1273 857185 sales2@kksystems.com https://www.kksystems.com
Paysend and Visa owned Currencycloud sign major global expansion deal
Currencycloud, the experts simplifying business in a multicurrency world, and Paysend, a global fintech leader in international money transfers, have announced a major expansion to their longstanding partnership that will see Paysend expand its services around the world.
The deal will see Currencycloud boost Paysend’s FX and treasury capabilities, with the fintech becoming a key partner of cross-border money movement flows for Paysend across the US, EMEA, and Asia-Pacific.
SETsquared ranked in the top three start-up hubs in Europe
The SETsquared Partnership has been ranked as the 3rd leading start-up hub in Europe and the top entry from the UK and Ireland by the Financial Times and Statista’s Special Report on Europe’s Leading Start-Up Hubs.
The report ranked 125 start-up hubs across 21 European countries using data and feedback from alumni and independent experts, including investors, and it also examined the success of emerging companies.
The deal also means that Paysend customers now have access to multicurrency wallets, which let users hold up to 34 currencies in the same app. Paysend customers will also access payments via the Swift network adding further choice to Paysend’s extensive global coverage.
Paysend is also significantly expanding its remittance offering in the UK, EU,
Canada, and the USA, drawing on Currencycloud’s experience working with innovative digital remittance firms that offer cheaper, fairer, and more transparent services than traditional suppliers. Paysend customers in those regions will be able to send remittances to over 180 countries around the world via Swift and local payment networks.
Currencycloud will also be supporting Paysend on the launch of new consumer-facing products and services scheduled for release in late 2024.
For further information, please visit: https://paysend.com
Paysend included in FT1000 List for the second consecutive year
Paysend, a leading cross border money transfer platform, is delighted to announce its inclusion in the prestigious FT1000 List for the second year in a row.
The FT1000 is an annual ranking that identifies Europe’s fastest-growing companies based on their compound annual growth rate (CAGR) in revenue over a specific period.
The Listing is a testament to Paysend’s remarkable growth trajectory and resilience in the competitive financial industry, highlighting Paysend as one of Europe’s leading success stories.
Paysend’s rise has been driven by a strategic vision that created partnerships, financed its growth, deepened access to its markets, and applied innovative technology to leverage both access and opportunity. Paysend raised an impressive $65m last year in an investment round following a strategic partnership with Mastercard through which Paysend enhanced crossborder payments for SMEs via its Open Payments Network (OPN).
Another important strategic partnership with TelevisaUnivision, the world’s largest Spanish language media company, by which Paysend’s advertising will be featured on TelevisaUnivision’s network for the next three years, is helping to make the Paysend brand a household name in Hispanic American households in the USA and further in Southern America. It has opened up the large USA-Latin America money-transfer corridor. A further strategic link opened with Western Union means the provision of digital payments for Western Union’s consumer business worldwide.
For more information, please visit: https://paysend.com
SETsquared is recognised for its unique collaboration model across six researchintensive universities and the quality of its place-based support for deep tech start-ups, alongside the scale, expertise, and capabilities that the six universities bring across the South and South West regions.
With six business acceleration centres and a range of sector-based innovation and investment support programmes, SETsquared’s mission is to turn innovation into thriving business. Since 2002, it has supported over 5,000 entrepreneurs working in the most challenging fields of science and technology to raise £4.4bn in investment.
The report, compiled alongside Statista and Sifted, rated each start-up hub based on data and feedback from its alumni across six categories, including mentoring and training development, infrastructure, legal assistance, business development, networking, and funding. Independent experts, including angel investors, VCs, entrepreneurs and academics, also added their evaluations and additional scores were awarded according to the most successful startups to have emerged from each hub.
Please visit: https://www.setsquared.co.uk
