THE ASCET INFORMER 2024 December Edition by Jamie Redden

THE ASCET INFORMER

60 Years of providing opportunities for technicians and technologists to Magnify their status as vital members of the engineering team.

ASCET's 59th Annual Convention and Expo

• KnowingYour Fire Alarm System

• Understanding Challenges in Specifying ACV's in Fire Suppression Systems

• Holiday Season Fire Safety : Stay Safe while Celebrating

Every Drop Counts

Celebrating a 150 Year Legacy of Water Safety Innovation Join

Water. It’s in our name and close to our hearts. Since 1874, has delivered innovative technologies that make the world’s most precious resource safe and accessible. Every effort, like every drop, has a ripple effect. Together, we can create a more sustainable world today and tomorrow.

ASCET National Members,

My name is Noah Koski and I am the newly elected Northeastern Regional VP. I’ve been involved with ASCET for many years at a local level with the Greater Baltimore Chapter and I’m looking forward to the opportunity to now work with the national team.

The new year is a great time to reflect and to realign your goals for the upcoming year. Whether it’s expanding your network, boosting your visibility, developing your technical knowledge, or developing relationships with your vendors, getting involved with ASCET can be a great way to achieve your goals.

If you’re interested in being involved locally, check out the ASCET website to find a local chapter near you. Local chapters meet monthly at a designated place and time that you are welcomed and encouraged to join. If you aren’t able to attend monthly chapter meetings you should still consider attending the annual expo and conference (referred to as the ACE) which will be in Raleigh, North Carolina on the first week of November 2025.

There’s no better way to obtain your CPD points with the low cost of the National and Local dues. With the IRS corrections and new website in the works, year 61 of ASCET will be a great year for the organization for both the members and the board of directors.

Merry Christmas and have a happy New Year.

Respectfully,

Noah Koski, CET, CWBSP

Northeastern Regional VP

ASCET National Office northeasternvp@ascet.org

National Executive Committee would like to extend warm Holiday Greetings to you and your Families. May this season be Filled with Joy, Peace, and Happiness. Wishing you a safe and wonderful New Year Ahead.

APPRENTICE

FIRE

CUSTOMIZED

Knowing Your Fire AlArm SYStem

BY ShAwn lee

When it comes to personal enjoyment in the fire alarm field, my favorite activity is troubleshooting and repairing systems. I enjoy troubleshooting because it’s a challenge. For me, it’s genuine fun (most times).

There were many times when the problem seemed clear as day. Just like there were times when I thought it would be easy, and it turned out it wasn’t. Sometimes it was because of something beyond my control, such as building construction. It made troubleshooting more than a little difficult. Other times it wasn’t easy to troubleshoot or repair the system because I failed to follow my number one rule of troubleshooting: “Know the system you are working on.” I want to tell a story about one of those times.

There I was. I remember it like it was yesterday. I was stationed at Kadena Air Base in Okinawa. It was a very long time ago..1998. I received a call to report to the base club. The system went into trouble and the trouble alert was annoying the club manager. Since it was dinner time and the building was occupied, I was directed to repair the system. I arrived, talked with the club manager, and set out to find the problem. I looked at the circuit board to see how everything was configured (it was Class B) and then I started searching for the problem. This system was a conventional fire alarm system. So that I do not unintentionally endorse a manufacturer, I will not tell you who made this panel or what its model name is, but I will say this was a very reliable panel, and I had been working with this panel for the last two and half years. I was very comfortable with it and knew its capabilities well. In fact, when I was first assigned to the Alarm Maintenance Shop in Kadena in 1997, I spent an extra hour after work each day for a month learning this and other systems. Based on my knowledge, I came to the conclusion that one of the initiating device circuits was in a trouble condition. “Probably an open in the wiring,” I thought. I was confident I would be able to find the problem and be on my way home in no more than an hour. Two hours later I was still working. Not able to find the issue. Fuming. Muttering to myself. I was using my tried-and-true technique of splitting the circuit in half and working towards the problem. Since it was an open, I knew at some point there would be no voltage on the circuit. Only, no matter which direction I searched the voltage was always there. At first, I was a little confused. Then came agitation. Later, flat out anger. Mostly at myself for not being able to get this done. When I calmed myself down and started thinking clearly again, I decided that maybe the problem wasn’t with the circuit, but perhaps the control panel was causing the issue. At the very least, if it wasn’t, then I could scratch it off the list of potential problems. I went back to the control panel and looked at it again to make sure nothing was damaged or out of place. Everything looked like it should. I checked every fuse with my voltmeter. All good. I focused on the expansion card. I think I looked at that expansion card for about two seconds when I found the problem. It wasn’t the circuit board, the expansion card, or even the circuit out in the field. The problem was me. I had failed to follow my own rule: “Know your systems”.

Yes, I knew what this model of panel was capable of. I knew how it operated. I knew where the fuses were, their ratings, and what they protected. I knew the panel well. But I didn’t know THIS system. The one in the base club. THIS system had a mixture of Class A and Class B circuits. THIS system had expansion cards and the circuit I was trying to repair was on one of those expansion cards. The main circuit board was configured for Class B operation for the bells and the detectors circuits. Yes, there were bells in that building, not strobes or horn/strobes. This was 1998, remember? I saw that the main board was configured for Class B when I first examined the panel. The expansion card with my circuit was configured for Class A. I didn’t remember checking for that when I first checked out the system. I made an assumption and got to work. In the end, that assumption cost me time and about a year off my life due to the mental anguish I caused myself!

Once I realized that I was working with a Class A circuit, I labeled and disconnected one side of the circuit so that system voltage could only flow in one direction. I then went back into the field and reconnected a few wires I had taken apart. Now that everything was reconnected except for conductors

I purposely left disconnected in the panel, I went back to troubleshooting. I found the problem within 10 minutes. I’m not kidding. It was a bad wiring connection inside a junction box above the ceiling in the kitchen area. The time it took once I figured out the circuit I was troubleshooting was a Class A circuit to getting back in my truck to leave was approximately 45 minutes. That included talking with the manager to let him know I was done and calling dispatch to tell them I was complete. If I had known my system (the base club’s fire alarm system) I would have finished the job in less than an hour.

I learned some valuable lessons that day. Don’t assume you know what’s going on because you’ve worked with a particular system before. Each system is unique. Check the control panel thoroughly before going out to the field wiring to troubleshoot. Make note of how the system you are currently working on is set up. With today’s systems, that may mean reviewing the programming or the input/output matrix if there is one. Either way, make sure you know how the system is configured and what it is supposed to do before leaping into the unknown.

As aggravated and upset as I was that day, I look back on that job as one of the best situations I’ve been in. I gained some valuable experience. At the end of the day, I got the system back up 100% and made sure the building occupants and the building itself had a functioning fire alarm system.

Shawn Lee Fire Alarm SME / Training Lead Fire Tech Productions Shawn@firetech.com

Tomaselli Fire Protection Engineering

Independently owned and operated

Fire Protection Engineering Consulting firm.

With our previous experience as the Engineering Manager for the Plan Review Division of one of the largest Counties in Maryland. We know what it takes to attain code compliance. Even in the grayest of areas.

We currently hold Professional Engineering licenses in Maryland, Virginia, DC, California, and Colorado with the ability to obtain licensure on demand.

We offer services that range from feasibility studies.

• System adequacy reports

• Hydraulic analyses

• Warehouse analyses

• Third party plan review

• All the way to working as the fire protection engineer of record for a variety of projects.

• Fire Protection Engineering services for anything you can think of.

Life safety and building code analyses sprinkler.

Fire alarm

Foam, Wet chemical and Dry chemical

Grease hood & duct, and other special hazard systems.

If you would like more information about Tomaselli Fire Protection Engineering or to discuss your project’s needs you can contact us at tomasellifpe@gmail.com.

Call For Candidates

The 2024 ASCET is now seeking candidates for National offices as follows

Western Regional Vice President

At some time during his or her technical career, every member of ASCET should consider volunteering as a candidate for office at the local or national level. Assuming responsibility as an officer requires much personal time and effort and often some unanticipated personal expenses are encountered in fulfilling a commitment. However, as an officer you may have opportunities that would not normally occur in your daily work. You will make many new personal contacts and develop professional skills that can increase your efficiency on the job. You will also become more knowledgeable about all aspects of your Society and its continuing efforts to promote the recognition of the Certified Engineering Technician. The Nominating Committee has prepared a packet of information and resume forms for candidates. If you are interested in becoming a national representative of ASCET, please contact office@ascet.org.

900XL3 Series

Zurn

Wilkins Backflow Preventers

The Contractor Favorite Just Got More Compact

Smaller

Valve. Better Value. The Zurn Wilkins 900XL3 Series Small Backflow Preventer delivers convenient size and substance to cut down on labor. We engineered the new and improved model to be even shorter and more compact than before, while integrating the time-tested features from our contractor favorites. Our repair kits allow for faster, cost-effective repairs, saving owners up to 20% over the life of the product. Upgrade to the greatest value with the most compact backflow preventer in its class for your next project.

Easy Install

• Shortest bronze small backflow preventer in its class to fit any application

• Vertical installation approved for the double check model to save more space

• Short lay length makes installation faster and easier

Quick Repairs

• Test ports located on valve’s centerline make install and testing easy

• Easy to remove check cover and relief valve cover makes valve servicing easier

• EZSwap® modular check with top access speeds up repairs and replacements

• Interlocking connected checks provide ¼ turn to access and disassemble

Super-durable

• All bronze body ensures durability against the elements

• Noryl™ check body and stainless steel fasteners resist corrosion over time

• Low-cost repair kits extend the lifespan at a significantly lower cost

• Check design minimizes moving parts to reduce wear and extend lifespan

UnderstandingChallenges in Specifying ACVs in Fire Suppression Systems

By Matt Sires

Article was Supply By Scott Monroe

We often hear people ask about two things regarding pilot-operated Automatic Control Valves (ACV) question question is about how to

Friction Loss Calculation Challenges

When reviewing a “minimum friction loss” chart tocalculate the pressure loss through a pilot one step result in lower outlet

ACV pressure setting –, the Zurn Wilkins

For this example,imagine having 175psiinlet pressure available to a 4 set to 155 psioutlet pressure for

As shown below, theexpected friction loss through 25 psi So,the question that often comes up is, “will that 25 psiloss from friction result in the outlet pressure dropping from 155 psito 130 psi

How can that be? Wehad the valve set to 155 psi, and then we lost25 psi rd grade math class and 155 –psiexcess in pressure on the inlet side of the valve (175 –155 = 20) allows the valve to modulateto let more high pressure water hold stable outlet pressures near 155 psi

In other words, the excess of 20 psiof inlet psi

Simple,right?So,what happens with the other 5 psiof friction loss? –

In our example, a outlet pressure no lower than 150 psi When friction loss is greater thanthe excess inlet pressure, ,and we can usethe friction lossgraph he inlet pressure, 175psi, minus the fall- psi (at1000 ), gives the outlet, a resulting pressure of 150 and

So, our actual equation looks like this…

(IF Excess Inlet Pressure <Friction Loss Pressure, – Friction loss

(175 psi – 25 psi = 150 psi, as shown in the example)

ELSE ACV Outlet Setting)

How to Set ACVs for Redundancy

When regulating pressure at a , often there is a need for scenarios require protects against a valve’s failure

increased risk of failures leading to potential leaks series to regulate pressure to

In this scenario, the (redundant) valve is upstream For this setup to ’s regulating pressure is set to 20-25 psi higher than the downstream valve 4 is set to 165 valve fails to operate,

How to Set ACVs for Bypass Applications

second potential pitfall with a single booster pumps

k demand, preventing surging of the set two valves in parallel with one another, the valve is set -7 psi higher than the

Feel free to reach out to the Zurn Wilkins

For more information contact Scott Monroe

Business Development Manager – Fire Protection & Waterworks scott.Monroe@zurn.com Cell 443-510-4054

Matt Sires is a product manager for Zurn Elkay and has been in the industry for 13 years. Feel free to reach out to Matt or another person on the Zurn Wilkins team if you have questions about automatic control valves.

THE IMPORTANCE OF REGULAR SMOKE DETECTOR TESTING

T E S T I N G R E Q U I R E M E N T S

In the U S , various legal requirements dictate the maintenance and testing of fire detectors, with noncompliance potentially resulting in fines or penalties. NFPA 72 specifies that fire alarm systems should be inspected by a qualified professional at least every six months. Additionally, many insurance policies require regular testing and maintenance as a condition of coverage Failure to meet these obligations could jeopardize claims in the event of a fire and have serious repercussions for responsible parties. By prioritizing regular testing, you gain peace of mind and ensure compliance

"A functional test of smoke detectors shall be performed at intervals not exceeding six months, or more frequently as required by the manufacturer’s instructions."

-NFPA 72, 2019, Section 14.4.3.3

PREVENTING FALSE ALARMS

Fire detectors can malfunction over time due to dust, debris, or electrical issues, compromising reliability. Regular testing identifies problems early, ensuring malfunctions are detected during routine checks, not emergencies Timely maintenance allows for the replacement of faulty detectors, ensuring continuous protection.

False alarms can be disruptive and costly Regular testing verifies detectors are working properly, minimizing false alerts from factors like dust, debris, or insects, especially with improper installation. Disruptions can lead to unnecessary emergency visits and reduce occupants' responsiveness to

Fire detectors are vital components of any building’s safety infrastructure, providing crucial early warnings in the event of a fire By quickly alerting occupants, these devices facilitate timely evacuations, significantly reducing the risk of injury and loss of life. To ensure optimal performance, regular testing and maintenance are essential for building owners and facility managers This commitment to reliability is supported by codes such as NFPA 72, which mandates routine inspections of fire alarm systems, and NFPA 25, which governs the inspection and maintenance of water-based fire protection systems Investing in these measures not only protects lives but also safeguards property and enhances overall safety.

genuine alarms Codes like NFPA 101 emphasize proper installation and maintenance to prevent these issues.

COMPLIANCE WITH MANUFACTURERS

Manufacturers provide specific guidelines for testing and maintaining fire detectors, which are crucial for warranty coverage and performance. Products from reputable manufacturers, such as those in the SDi portfolio including Solo and Testifire are UL listed and comply with standards like UL 268 for smoke detectors and UL 521 for heat detectors.

"Functional testing of smoke detectors shall ensure that the detectors properly detect smoke and activate the alarm system. This can be achieved by using an appropriate test device or method as recommended by the manufacturer."

-NFPA 72, 2019, Section 14 4 3 4

PEACE OF MIND

Fire detectors are essential for protecting lives and property, enabling rapid detection, timely evacuations, and effective emergency response. While serious fires are rare, the risk remains, making regular testing of fire detection systems crucial Regular testing ensures the system is ready to respond, safeguarding both occupants and assets Functional tests, as required by industry codes like NFPA 72 and NFPA 25, verify that detectors are functioning properly, preventing false alarms and ensuring the system operates effectively for optimal safety

50% FASTER HEAT AND HI-HEAT ACTIVATION

TESTIFIRE XTR2 FEATURES SMOKE, HEAT, HI-HEAT, ASD, SEQUENTIAL & COMBINED TEST MODES

EXPLORE THE FEATURES OF TESTIFIRE XTR2

ASCET's 59th Annual

As the President of ASCET, I want all of our devoted sponsors, speakers support of our organization. Your dedication, truly made a difference in our your ongoing

The recent ASCET annual convention success, providing invaluable education tabletop sponsors offered valuable insights and services, while technical support address any questions or concerns. sessions on industry codes, installation enhancing the knowledge The hard work and dedication of the have not gone unnoticed. Their efforts milestones and organizing a successful Their selfless commitment and countless our organization's ability to serve our to have such a I would like to commend Lisa Hurst, Redden, ASCET Marketing Director, Annual Convention, especially considering ACE. Kyle Watterworth, ASCET Southeast crucial role in the success of this year's behind securing sponsors Kyle Watterworth, the Southeast Regional a crucial role in this year's ACE event. made him an invaluable asset to our in securing sponsors and speakers, behind the success

I would also like to extend my gratitude Marty Sabla, President-Elect, for their support throughout the planning and was instrumental in making

A special thank you to Noah Koski, the for his assistance and support when go unnoticed and were I would also like to express my gratitude Marinaccio for their continued dedication and commitment to the ACE committee and I am truly grateful for I apologize if I have inadvertently many supporters I want to wish everyone a Happy as we move forward

Warm Steven

Convention and Expo

to extend my sincere appreciation to speakers and volunteers for their unwavering dedication, passion, and enthusiasm have our efforts, and we are grateful for ongoing conventioncommitment. held in November was a resounding education and support to our members. Our insights into new and existing products support representatives were on hand to Our speakers delivered informative installation practices, and new products, knowledge of all attendees.

the Executive Committee and volunteers efforts have been instrumental in achieving successful event for our members and sponsors. countless hours of work have strengthened our communities, and we are fortunate dedicated team.

Hurst, ASCET General Manager, and Jamie Director, for their exceptional work at the considering it was their first time supporting Southeast Regional Vice President, played a year's ACE, serving as a driving force sponsors and speakers.

Regional Vice President of ASCET, played event. His dedication and hard work have our organization. Kyle was instrumental speakers, driving the momentum success of ACE.

gratitude to Jimmy Lynch, ASCET COB, and their guidance, direction, and unwavering and execution of ACE. Your leadership making this event a success. the Northeast Regional Vice President, when needed. Your contributions did not were greatly appreciated. gratitude to Joe Krieger, Joe Deluca, and Lou dedication and support. Your hard work committee have not gone unnoticed, for everything you have done. inadvertently left anyone out, as there are supporters to Happyacknowledge.

New Year and safe travels forward into the new year.

Regards, Redden

Thank You Sponsors for your Support!!!

Congrats to the Baltimore Chapter for winning 2024 Chapter of the Year

Congrats to Lou Marinaccio for winning 2024 Member of the Year

Congrats to Joe Krieger for winning 2024 Newsletter of the Year

Congrats to all The Winners!!!

Keep an eye out for ASCET's National Executive Committee and chapter members at upcoming events. Visit our booths and participate in our putting challenge for great giveaways, including discounts on memberships.

Join us for a chance to win exciting prizes and learn more about the benefits of becoming a member of ASCET. Learn how you can Be an ASCET to yourself!!

The Hawaii Chapter of ASCE T

Ho’omaika’i ‘ana to our ASCET Ohana w ishing the very best to all & the best of luck as we Kulia i ka nu’u at The American Society of Engineering Technicians and the 59th Annual Conference and Expo and the 60th year of ASCET Annual Annual Annual Annual AnnualAnnual 2024

AGF Manufacturing Preassembled Fire Sprinkler Solution with Model 8511Z Sprinkler Floor Control and Zurn ZW5004 Press Reducing Valve

MALVERN, PA, April 4, 2024- AGF, a leading provider of innovative fire protection solutions, proudly announces the integration of its renowned, domestically made Model 8511 Sprinkler Floor Control manifold with the Zurn Model ZW5004 adjustable pressure reducing valve, offering unmatched efficiency and reliability for the fire sprinkler industry.

The AGF Commercial RiserPACK Model 8511Z is meticulously crafted in the USA using high-quality schedule 10 pipe, ensuring superior durability and performance. This assembly incorporates the AGF Model 2511 TESTanDRAIN valve with a pressure relief valve and drain trim, flow switch, pressure gauge, and AGF Universal 3-way gauge valve, along with a 2 ½” hose valve. The 8511Z manifold was designed specifically for floor control applications where a downstream drain outlet, capable of full flow is required for Pressure Reducing Valve acceptance testing and future inspection and testing requirements.

The integration of the Zurn ZW5004 Valve adds another layer of functionality and versatility to the AGF solution. The ZW5004 Valve is a 2-1/2" Pressure-Tru® Valve featuring an angle body and grooved connections. Certified as a floor control valve, an indicating valve, and a check valve in automatic sprinkler systems, it is also listed as a standpipe valve for CLASS I and CLASS III systems. With the ability to regulate pressure under both FLOW and NO-FLOW conditions, the ZW5004 Valve offers unparalleled precision and control. Field adjustments are made effortlessly thanks to its low torque design, requiring only 9 ft lb of torque. Despite its compact profile, the larger handwheel ensures smooth operation, even in tight spaces.

"The integration of AGF's Model 8511 Sprinkler Floor Control with the Zurn ZW5004 Valve reflects our dedication to meeting the evolving needs of the fire protection industry. By providing these trusted products as a preassembled component, our goal is to streamline installation and guarantee reliability for fire protection contractors," said Jim McHugh from AGF Manufacturing. "This collaboration delivers a holistic solution that encompasses reliability, efficiency, and user-friendliness, establishing a new benchmark for fire sprinkler systems."

The combined features of the Model 8511Z Sprinkler Floor Control and Zurn ZW5004 pressure reducing valve make them ideal for a wide range of applications, including retrofit projects and new installations. Their compatibility and superior performance ensure optimal flow performance, making them indispensable assets for any fire protection system.

For more information about AGF's integrated fire protection solutions or to find a distributor in your area, visit AGFMFG.com.

About AGF Manufacturing Inc.

AGF Manufacturing is a leading provider of innovative fire protection products, offering unparalleled reliability, versatility, and ease of use. With a long-standing commitment to the fire sprinkler industry, AGF has earned a reputation for delivering innovative solutions that help manage fire safety systems more efficiently. The company's legacy of innovation began with the Model 1000 TESTANDRAIN® single valve inspector’s test, which revolutionized the fire sprinkler industry by eliminating the time and space consuming traditional loop assembly. Building on this legacy, AGF has since introduced a range of unique products that cater to the diverse needs of the fire protection industry, ensuring that commercial and residential fire sprinkler systems are as reliable and efficient as possible.

At AGF, our team of experts is constantly working to improve existing products and bring new, code compatible fire protection solutions to the market. Our product line, which includes PURGENVENT™, COLLECTANDRAIN®, CORRINSITE™, TESTANDRAIN®, RemoteTEST®, Inspector'sTEST™, RiserPACK™ and TESTANSAVE™, is designed to meet the evolving needs of the fire protection industry.

For more information on AGF and our innovative line of fire protection products, please visit our website at www.agfmfg.com

Contact: Ellen Davis, AGF Manufacturing Inc.

Phone: 610-240-2900

Email: edavis@agfmfg.com

Holiday Season Fire Safety: Stay Safe While Celebrating

The holiday season is a time of festive celebrations, glowing lights, and winter greenery, but these elements also bring fire hazards that can quickly turn joyful moments into devastating incidents. The National Fire Protection Association (NFPA) is dedicated to raising awareness about these risks by providing resources like tip sheets, videos, and guidelines to help ensure a safe holiday season for everyone.

Winter Holiday Fire Facts

U.S. fire departments respond to an average of 835 home structure fires annually that originate from decorations (excluding Christmas trees). These incidents result in:

• An average of 3 civilian deaths per year 30 civilian injuries

• $14 million in property damage annually

• 41% of Christmas tree fires are linked to electrical distribution or lighting equipment.

• 20% of Christmas tree fires are caused by lamps or bulbs, while 11% are ignited by candles.

• 40% of home Christmas tree fires occur in the living room.

• Candle fires are most common in December and January, with 11% of such incidents occurring during each of these months.

• Thanksgiving sees the highest number of cooking-related home fires, followed by Christmas Day and Christmas Eve.

• Year-round, candles account for 32% of decoration-related fires. This figure rises to 46% in December. Cooking is responsible for 20% of decoration fires.

Christmas Tree and Decoration Fires

Thoughtful decoration practices can greatly enhance safety during the holidays. Between 2018 and 2022, U.S. fire departments responded to an average of 155 Christmas tree-related fires annually. In addition, an estimated 835 decoration-related fires (excluding Christmas trees) were reported each year. Tips for Safer Holiday Decorating

• Ensure proper installation and use of electrical decorations.

• Avoid overloading circuits or using damaged lights.

• Position decorations away from heat sources and open flames. For more insights on fire safety while decorating, check out UL’s white paper: Reducing the Fire Hazard of Pre-Lit Artificial Christmas Trees.

Christmas Tree Disposal

As Christmas trees dry out, their flammability increases significantly. In fact, 36% of Christmas tree fires occur in January. While such fires are uncommon, they can escalate rapidly if they do happen. Prompt disposal of dry trees is essential for minimizing risks.

Holiday Fire Safety: Protecting Your Home and Loved Ones This Season

The holiday season is filled with joy and celebration, but it also comes with an increased risk of home fires. From festive decorations to elaborate cooking preparations, these traditions can introduce various fire hazards. In this guide, we’ll emphasize the importance of holiday fire safety, identify common risks,

and provide practical tips to keep your home and loved ones safe. By taking precautions and preparing an emergency fire escape plan, you can enjoy a worry-free holiday season.

Why Holiday Fire Safety Matters and Understanding the Risks

As we light up our homes and deck the halls, it’s important to recognize the fire hazards that come with the festivities. Christmas trees, decorative lights, and candles, while beautiful, can pose serious dangers if not handled safely. Eye-Opening Statistics The National Fire Protection Association (NFPA) reports an average of 160 Christmas tree-related home fires annually. Additionally, 47% of decoration-related fires occur in December, resulting in an average of 770 home fires each year. These figures highlight the importance of vigilance during the holidays.

Common Fire Hazards During the Holidays

• Overloaded Electrical Outlets

• Avoid the temptation to plug all your holiday lights and devices into a single outlet. Overloading outlets can cause overheating and lead to fires. Use surge-protected power strips and avoid daisy-chaining extension cords to distribute the electrical load safely.

• Improper Candle Use

• While candles create a cozy holiday atmosphere, they can also be dangerous if left unattended. Place them away from flammable materials, keep them out of reach of children and pets, and always extinguish them before leaving the room or going to bed.

Safe Decorating Practices

• Choose Flame-Resistant Decorations

• Select decorations labeled as flame-resistant or flame-retardant. These materials are better equipped to withstand heat and prevent fires.

• Keep Christmas Trees Hydrated

• If you have a live tree, water it daily to prevent it from drying out. Place the tree away from heat sources like radiators, fireplaces, or vents. A well-hydrated tree is less likely to ignite and burn rapidly.

Cooking Vigilance

• The kitchen is the hub of holiday feasts—and a common site for fires. Never leave cooking unattended, regularly check on food, and keep flammable items like towels and mitts away from open flames.

• Heating Source Maintenance

• Ensure heaters and fireplaces are properly maintained, free from debris, and have sufficient ventilation. Keep combustible items at least three feet away from heating equipment to minimize risks.

Kitchen Safety During Holiday Feasts

• Stay Focused

• Whether you’re baking cookies or preparing a holiday roast, always stay in the kitchen while cooking. Avoid distractions, and keep children and pets away from hot appliances.

• Check Appliances

• Inspect your kitchen appliances for frayed cords or faulty switches before use. Prioritize safety by keeping appliances in good working order.

Prepare an Emergency Fire Escape Plan

Map Out Escape Routes

• Work with your family to outline clear escape routes from each room in the house. Ensure pathways remain uncluttered for quick and safe exits.

• Practice Fire Drills

• Rehearse fire drills with your family to ensure everyone knows what to do in an emergency. Choose a designated outdoor meeting spot and time how quickly everyone can get there.

The Importance of Smoke Alarms and Fire Extinguishers

• Test and Maintain Smoke Alarms

• Test your smoke alarms regularly and replace the batteries as needed. Ensure alarms are installed in key areas such as the kitchen and bedrooms.

• Know How to Use a Fire Extinguisher

• Learn the PASS technique for using a fire extinguisher: Pull the pin, Aim at the base of the fire, Squeeze the lever, and Sweep from side to side. Familiarity with this tool can make all the difference in a fire emergency.

Educating Children and Guests

Teach Kids Fire Safety

• Educate children about fire safety basics, such as avoiding matches and understanding the importance of quick exits. These lessons can save lives and instill lifelong habits.

• Inform Guests of Emergency Procedures

• When hosting holiday gatherings, inform your guests about escape routes and safety measures. A quick orientation ensures everyone knows what to do in case of an emergency.

Celebrate Safely

As you enjoy this holiday season with family and friends, prioritize fire safety to ensure your celebrations remain joyous and stress-free. By following the tips outlined here, you can reduce the risk of home fires and protect what matters most.

Stay vigilant, stay prepared, and have a happy, fire-safe holiday season!

UL 162 Listed FM 5130 Approved

More sprinkler listings than any other ﬂuorine-free foam!

SOLBERG® RE-HEALING™ foams are the gold standard in fluorine-free firefighting solutions.

SOLBERG® RE-HEALING™ RF3 3% Foam Concentrate rapidly extinguishes Class B hydrocarbon fuel fires. Versatile SOLBERG® RE-HEALING™ 3x3 SP-100 Foam is the first UL-listed fluorine-free foam for both hydrocarbon and polar solvent fuel fires.

Custom Equipment Solutions

From bladder tanks and other proportioning systems to discharge devices and mobile products, we design hardware tailored to your needs.

Explore our full range of solutions at www.perimeter-solutions.com.

Trusted. Solutions That Save.

perimeter-solutions.com

4/10/24, 7:06 PM

Please contact the marketing director if you have articles or advertisements you would like to see published in an upcoming issue of The ASCET Informer magazine. The publication is scheduled to be released every other month. If you have any content to submit or would like to update Information, in The ASCET Informer magazine, please send it to marketing@ascet.org

I am eager to hear from all of you and am excited about the possibility of featuring your contributions in our magazine.

Thank You

Jamie Redden marketing@ascet.org

You can also Find us on: www.ASCET.org Facebook -@ASCETNational LinkedIN -ASCET Social Media

Board of Gover nors

NICET's Board of Governors (BoG) meets twice each year to set strategic goals and establish operating policies for NICET. Board members serve in a volunteer capacity. Seven are knowledgeable in the ﬁelds of engineering and engineering technology, while the eighth represents the general public.

Board members are selected by a nominating committee and confirmed by the Board. It is a multifaceted process that includes vacancy announcements issued by NICET, the Interest Groups of the National Society of Professional Engineers (NSPE) and other engineering societies including the American Society of Certified Engineering Technicians Self-nominations by NICET certificants and NSPE members are also accepted A term on the Board lasts three years, and Board members may serve up to two consecutive terms.

Home / About / Board of Governors

THE ASCET STUDENT OF ENGINEERING TECHNICIAN / TECHNOLOGY CASH GRANT

This grant - formerly known as the ASCET Student of Engineering Technician /Technology Cash Grant small cash grant - is designated for current or incoming post-secondary students attending an ABET accredited college, university, junior college or vocational technology school who are, or will be, majoring in a field within engineering technology. The grant was originally suggested by students and faculty advisors who recommended that a grant be awarded to deserving students and that this award carry as few restrictions as possible. The award shall be in the amount of $1,200.00 to be used to offset the cost of educational expenses as desired.

QUALIFICATIONS

• Be either a student, certified, regular or registered member of ASCET OR,

• Be a High School senior in the last five months of the academic year who will be enrolled in an Engineering Technology curriculum no later than six (6) months following selection of the award.

• By achieving passing grades in their present curriculum.

SELECTION AND AWARD

All applications are reviewed by the Financial Aid Committee which also selects the recipients. Recipients will be notified in July and checks will be mailed to the recipients in September. Award checks will be issued directly to the students upon notification and verification that they are enrolled in an Engineering Technology curriculum in an institute of higher learning.

INSTRUCTIONS FOR APPLICATION

• Complete the APPLICATION FORM which applies to you (ASCET Member or High School Student).

• Attach at least one (1) LETTER OF RECOMMENDATION from a personal acquaintance, faculty member or employer outlining motivation, progress, outstanding achievements, and an evaluation of your potential in the field of Engineering Technology.

• Attach a copy of your TRANSCRIPT.

• Be sure all documents are mailed in sufficient time for receipt by the ASCET Office by January 30 of each..

• NOTE: Failure to complete or include any items in the application package may be grounds for rejection unless the committee, at its discretion, is able to notify you of the incomplete or omitted items, and such items are submitted within the evaluation period time schedule.

• This package should contain:

1. (A)Application Form ASCET Member or (B)Application Form High School Senior

2. Recommendation Letter

NOTE: Only Engineering Technology students qualify for this grant, not those seeking an engineering degree. For ENGINEERING scholarship information we suggest you contact the National Society of Professional Engineers for their scholarship requirements. Please contact: NSPE Scholarship Division, Educational Foundation; NSPE; 1420 King Street, Alexandria, VA 22314-2715; (703/684-2858)

THE ASCET STUDENT OF ENGINEERING TECHNICIAN/TECHNOLOGY CASH GRANT

A. ASCET Member APPLICANT

Name___________________________________________________Telephone ( )_________________________

Mailing Address____________________________________________________________________

street ________________________________ city ________________state _________zip_______________

What is your membership category? ______________________________________________________________

If a student member, list student chapter______________________________________

Faculty Advisor____________________________________________________________________________

What institution do you attend?_________________________________________________________

Address_________________________________________________________________________________

street ________________________________ city ________________state _________zip_______________

Are you a full time or part time student?

Are you receiving other financial aid? yes or no If yes,in what amount? $_____________

Why are you applying for this grant?__________________________________________________________________

__________

ATTACH A COPY OF YOUR TRANSCRIPT TO THIS APPLICATION. I here by certify that the answers given in this application are true and accurate.

Date______________Your signature__________________________________

I attest to the applicant's passing grades.

Date______________Signature______________________________________ FacultyAdvisor/Instructor

THE ASCET STUDENT OF ENGINEERING TECHNICIAN/TECHNOLOGY CASH GRANT

B. GRANT APPLICANT

Name___________________________________________________Telephone( )_________________________