SERVICING
NEW FILTRATION RANGE NOW AVAILABLE From NAPA Auto Parts
Australia’s newest name in the automotive aftermarket says it is proud to release its range of NAPA Filters for common passenger motor vehicles. The range includes air, oil, fuel and cabin filters and are produced with quality and value at top of mind. GPC Merchandise Manager - Filtration, David Cattunar, says his team worked hard to source the right facility to produce a filtration range that could provide the right level of quality to meet workshop and consumer expectations. “Nobody who cares about an engine will pick up
a filter and think ‘that’ll do’, so we made sure our range meets or exceeds OE standards, but without the OE price tag,” David said. “Each NAPA Filter includes features you’d expect from OE or market leader filters to ensure we’re providing value every time you purchase any filter in the range. “We’ve tested our filters to SAE standards to ensure the best performance, longevity and flow to reduce engine wear, and best of all, they satisfy new car warranty requirements.” With quality and value at top of mind, NAPA Auto Parts says it makes sense that its air filters utilise media technologies that put them at the very top end of market quality to ensure contaminants are collected effectively and ensure filter efficiency and longevity. Likewise, it explains most of the NAPA oil filters utilise a specifically developed synthetic blend media to deliver optimum filtration, efficiency and life, and include an anti-drain back valve, where applicable on OEM filters.
For inside vehicles, each NAPA cabin filter features anti-viral activated carbon media which prevents pollen, odours, gases, mould, fungus, bacteria and certain viruses such as Influenza Type A from entering the HVAC system. The NAPA Filters are the latest in a range of quality NAPA branded service parts and consumables including oil, wipers and drive belts. Not only does NAPA Auto Parts stock a range of quality NAPA branded products, it says it is also home to the world’s leading service brands including Ryco, Penrite, NGK, Gates, OEX, Milwaukee Tool and many more. For more information, visit www.napaparts.com.au for your local branch.
ONLINE TRAINING FOR EVS The do’s and don’ts
EV charging and conversions specialist, EVUp, says that in Australia it is expected that around a third of all new vehicles sold by 2024 will be battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV).
Identification of an EV Firstly, can you identify a BEV or PHEV when it comes to your workshop? Look for the mandatory blue diamond ‘EV’ sticker on both numberplates, plus badging on the side, front or rear of the vehicle that says ‘EV,’ ‘Zero Emissions’ or ‘Hybrid.’ You should also ensure you can identify high voltage cabling before working on an EV. Generally, all cables and components that are orange – conduit or plastic covered wires – are high voltage, as are the components they terminate to. This is a good time to mention personal protective equipment (PPE), as insulated tools, fire resistant long trousers or overalls and gloves relevant for work to AS2225:1994 and AS 2161.1.2016 should be procured for enhanced safety of your team.
Handling EVs in your workshop When moving EVs around a workshop, extra care must be taken. Ensure the ignition key is on (to
allow release of the electric handbrake), place the vehicle in neutral, engage the handbrake and disconnect the 12V accessory battery. Under no circumstances should an EV be lifted via the battery pack. For example, a floor scissor lift should never be used to raise the electric vehicle for servicing. Some EVs will require hoisting jacks, which are often carried by the EV owner.
EV safety inspection You should conduct a thorough safety inspection before servicing work is carried out, including checking all HV connections are firmly joined, and looking for water ingress into seals, damage or snags in HV cabling and battery pack integrity. An inspection of the charging port and equipment, tyres, brakes, steering and suspension can then be carried out. Most importantly, a ‘state of health’ check of the EV traction battery should be completed using an appropriate scanning tool to determine if the battery management system (BMS) and charging module have any cells at fault or charging failures.
EV servicing Because they have fewer moving parts, EVs need less servicing than other vehicles. However, some common faults include:
• faulty sensors, such as proximity sensors for park assist and doors; • faulty charging cables and charge ports; • HV traction main fuse due to excessive current draw (such as hard acceleration); • driveaway protection failure (while vehicle is connected to charging); • battery balancing - check fault codes to diagnose; and • BMS systems due to uneven battery voltages.
EV HV Safety Training To prepare yourself and your team for the transition to low-emission transport, EVUp says it has worked with a group of EV experts in Australia and New Zealand to build a quick and cost effective online training course. AAAA members can access this course with a 10 percent discount – to register using this discount, go to www.evalliancetraining.thinkific.com and enter the coupon code ‘AAAA member.’ For more information, visit www.evup.com.au Australian Automotive Aftermarket Magazine June 2021
77
