Safety Solutions
Arc Flash
Oberon Arc-Rated Hydration Pack with Bladder and Bag
• First-ever arc flash-compliant hydration pack solution, featuring a lightweight, low-profile design
• Sealed top flap closure secures bladder while keeping dirt and debris out
• Drinking tube with shut off valve
Environmental Safety
Yellow Abatement Bags
• Available on rolls (PTO) or loose
• Printed caution warning message to regulations
• Customizable to required sizes and thicknesses
40 Cal TCG™ Deluxe Arc Flash Suit Kit (Hood, Coat with Escape Strap and Bib-Overall with 26-in. Leg Zippers)
• Lightweight suit made from proprietary blend of arc-rated, inherently flame-resistant, aramid fibers
• Equipped with a 20-ft. long Kevlar® strap which can be used to assist in contact release or drag a worker away from harm
OBERTCG4B-ESL-S+HVSL S
OBERTCG4B-ESL-M+HVSL M
OBERTCG4B-ESL-L+HVSL L
OBERTCG4B-ESL-XL+HVSL XL
OBERTCG4B-ESL-2XL+HVSL 2XL
OBERTCG-ESL-3XL+HVSL 3XL
OBERTCG-ESL-4XL+HVSL 4XL
OBERTCG-ESL-5XL+HVSL 5XL
POLY05-0970
(4.0 MIL, 26 IN. X 40 IN. PRTD 100/RL)
POLY05-0840 (4.0 MIL, 35 IN. X 60 IN. PRTD 50/RL)
POLY05-0838
(4.0 MIL, 38 IN. X 60 IN. PRTD 75/RL)
POLY05-0837 (4.0 MIL, 48 IN. X 60 IN. WITH LABEL 50/RL)
POLY05-0903
POLY05-1505
POLY05-1454
POLY05-1504
Clear 3.0 Mil Layflat Poly Tubing
• Customizable to required diameters and thicknesses
• Flexibility, allows for custom-cut lengths
• Perfect for air transfer, air scrubbing and air purification systems
(6.0 MIL, 26 IN. X 40 IN. PRTD 100/RL)
(6.0 MIL, 33 IN. X 40 IN. PRTD 75/RL)
(6.0 MIL, 33 IN. X 50 IN. PRTD 75/RL)
(6.0 MIL, 38 IN. X 60 IN. PRTD 50/RL)
ESCAPE STRAP ARC FLASH & SHOCK RESCUE DEVICE
Built-in protection. Instant rescue.
Are You Prepared to Rescue a Worker from an Arc Flash or Shock? Standards require emergency response training, including methods of safe release of victims from contact with energized electrical conductors or circuit parts.
Challenges with Traditional Rescue Hooks:
Difficult to use and not always effective
Require frequent retesting and maintenance
Not always readily available during emergencies
A Smarter Solution—Instant Access
Sewn directly into Arc Flash coats, vests, or gas extraction suits
Always ready – no need to locate a separate tool
Reliable Performance
Enables quick, safe extraction in emergencies: pull, drag, direct, or lift the injured worker
Low Maintenance
No retesting or waxing required
Stored discreetly in an external garment pocket
cLOTO™ SOLUTION
An innovative combination of cloud software, mobile applications, and safety padlock hardware that digitizes and brings traceability and automation to your lockout program.
DIGITIZE ENTIRE LOTO PROGRAM IMPROVE SAFETY DRIVE ACCOUNTABILITY
LEARN MORE ABOUT CONNECTED cLOTO™ SOLUTION
Facilities Safety
BradyPrinter S3700 Multicolor & Cut Sign and Label Printer, WiFi and Bluetooth
• Seamless multicolor for more impactful labels, signs and tags
• Precision XY plotter cutter for smoother curves and tighter connection points
• Auto adjustments help ribbon cartridges last up to 60% longer
Master Lock Lockout Tagout Safety Padlocks
• 410 Series suited for safe and compliant lockout during maintenance at any facility
• Multiple colors and shapes enable a site to standardize padlocks specific to lockout
• Durable, lightweight, non-conductive lock body for easy handling
Fall Protection
3M™ DBI-SALA® ExoFit™ X300 Comfort X-Style Climbing Safety Harness
• 6000-lb. polyester webbing, robust padding with reflective 3M Scotchlite panels, lightweight aluminum hardware
• New Dorsal D-ring technology for efficient connections and safe harness fit
• Locking torso adjustment and quick-connect buckle options
Floor Marking Tape PETG 3 in. W x 100 ft. L Yellow, Black
• Thinner profile and true edge-to-edge adhesive
• Damage-isolating design keeps rips from running for longer-lasting tape
• Easy installation with minimal tools
Master Lock Portable Lockout Kit
• Portable kit includes everything needed for electrical lockout
• Equipment stores securely in a rugged toolbox to keep everything together
• Padlocks are supplied keyed alike
Contact your local Wesco branch at
Hand Protection
TenActiv™ S18WTLFN Waterproof Cut Resistance with Cold Protection Down to -10°C / 14°F plus nitrile palms for steady wet grip
• ANSI cut A4 with 360° cut protection
• Acrylic lining for warmth down to -10°C / 14°F plus treated with laminated waterproof membrane to resist water and wind
• Nitrile palm coating offers steady wet grip
6
8
9
SUPGS18WTLFN-10 10 SUPGS18WTLFN-11 11
12
Dexterity® SNAGPVC Cut Resistant Gloves with Cold Protection Down to -5°C / 23°F and PVC palm coating for steady grip
• High ANSI cut A5 with 360° cut protection
• Fleece lined for cold protection down to -5°C / 23°F
• PVC palm coating for steady grip and protection against stiffness in cold conditions
Why Superior Glove for Cold Protection
Superior Glove’s cold protection products are extensively tested in-house to maximize warmth and dexterity in cold conditions.
Their product line also incorporates protection against other hazards including cut, impact, puncture, abrasion, arc flash, and heat
Contact your Wesco representative to inquire about Superior Glove’s full cold protection product line.
SUPGSNAGPVC-S S
SUPGSNAGPVC-M M
SUPGSNAGPVC-L L
SUPGSNAGPVC-XL XL
SUPGSNAGPVC-2XL 2XL
SUPGSNAGPVC-3XL 3XL
Hand Protection
BDG® CUT-X® Nitrile Coated 13 ga. HPPE Gloves
• 13 ga. HPPE shell
• Nitrile palm coating with textured finish
• Elastic knit wrist with hemmed cuffElastic-knit wrist with hemmed cuff
BOBD99-1-9626-7 7
BOBD99-1-9626-8 8
BOBD99-1-9626-9 9
BOBD99-1-9626-10 10
BOBD99-1-9626-11 11
G-Tek® Paradox™ Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers with Reinforced Thumb Crotch
• Premium PolyKor® blended 21G shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
• Touchscreen compatible
• Reinforced thumb crotch increases protection and wear life
BDG® DENY® 6 mil Tri-Polymer Disposable Gloves
• 6 mil tri-polymer
• Fully textured
• Powder free
BOBD99-1-6300-S S
BOBD99-1-6300-M M
BOBD99-1-6300-L L
BOBD99-1-6300-XL XL
Watson Gloves Flextime Sustainable Winter Glove - Eco-Thinsulate, Water-Resistant Leather, Recycled Spandex, Reinforced Thumb
• Lightweight 3M Thinsulate™ EC60 lining is made with 78% post-consumer recycled materials
• Dryhide™ water-resistant, full-grain goatskin leather palm
• Hooded fingertips and thumb reinforcement"
SCAPE GOAT | 9549TPR & 9547TPR VAN GOAT
• 3M Thinsulate™ C100 lining
• Full sock Cutshield™ A7
Para-aramid/steel/polyester liner
• Dr yhideTM water and oil resistant full-grain goatskin leather
• Heavy duty rubber
• Stitched with Kevlar Kevlar® thread Size: XS–XXXL
• 3M Thinsulate™ C100 lining
• Full sock Cutshield™ A7
Para-aramid/steel/polyester liner
• Dr yhideTM water and oil resistant full-grain goatskin leather
• Heavy duty rubber
• Stitched with Kevlar Kevlar® thread Size: XXS–XXXL
Hand Protection
Watson Gloves Van Goat - Goatskin, Cut-Resistant Winter Lined Gloves
• 3M Thinsulate C100 lining
• Full-sock Cutshield™ para-aramid/steel/ polyester liner, ANSI cut A7
• Dryhide oil- and water-resistant, full-grain goatskin leather
WATS9549-M M
WATS9549-L L
WATS9549-XL X
WATS9549-2XL 2XL
Watson Gloves Van Goat - Goatskin, Impact and Cut-Resistant Winter Lined Gloves
• 3M Thinsulate C100 lining
• Full-sock Cutshield™ para-aramid/steel/ polyester liner, ANSI cut A7
• Dryhide oil- and water-resistant, full-grain goatskin leather
Watson Gloves Van Goat - Goatskin, Cut-Resistant Winter Lined Gloves
• 3M Thinsulate C100 lining
• Full-sock Cutshield™ para-aramid/steel/polyester liner, ANSI cut A7
• Dryhide oil- and water-resistant, full-grain goatskin leather
WATS9547-2XS 2XS
WATS9547-XS XS
WATS9547-S
WATS9549TPR-XS XS
WATS9549TPR-S S
WATS9549TPR-M M
WATS9549TPR-L L
WATS9549TPR-XL XL
WATS9549TPR-2XL 2XL
WATS9549TPR-3XL 3XL
Watson Gloves Van Goat - Goatskin, Impact and Cut-Resistant Winter Lined Gloves
• 3M Thinsulate C100 lining
• Full-sock Cutshield™ para-aramid/steel/polyester liner, ANSI cut A7
• Dryhide oil- and water-resistant, full-grain goatskin leather
WATS9547TPR-2XS 2XS
WATS9547TPR-XS XS
WATS9547TPR-S S
WATS9547TPR-M M
WATS9547TPR-L L
WATS9547TPR-XL XL
WATS9547TPR-2XL 2XL
WATS9547TPR-3XL 3XL
Build a More Resilient Supply Chain
Protective Clothing
Tyvek® 400 SFR - Secondary Flame Resistance with the Protection, Durability and Comfort of Tyvek®
• Lightweight disposable overgarment designed to help protect and preserve primary flame-resistant (FR) garments
• Composed on flame-retardant treated Tyvek®, available only from DuPont
• For use over primary flame-resistant protective clothing
Protective Clothing
•
•
• Detachable insulated hood
PIPCPC343M6450X-OR/S S
PIPCPC343M6450X-OR/M M
PIPCPC343M6450X-OR/L L
PIPCPC343M6450X-OR/XL XL
PIPCPC343M6450X-OR/2XL 2X
PIPCPC343M6450X-OR/3XL 3X
PIPCPC343M6450X-OR/4XL 4X
PIPCPC343M6450X-OR/5XL 5X
PIPCPC343M6450X-OR/6XL 6X
Respiratory Protection
Tychem® 6000 SFR - Broad Chemical Protection and Secondary Flame Resistance in a Lightweight Garment
• Provides at least 30 minutes of protection from more than 250 chemical challenges, including toxic industrial chemicals and flammable organic solvents
• Offers secondary flame resistance when worn over primary flame-resistant garments
•
DUPTFS127TLT-2XL 2XL
Bisley® ANSI Type R Class 3 and CSA Z96
Class 2 X-Back Extreme Cold Jacket with Navy Bottom
• Waterproof polyester ripstop 300D with PU coating
• 20.26 oz. of multi-layer insulation, including 10.62 Sorona® Aura insulation for extra warmth in extreme cold conditions down to -51° F (-46° C)
• Detachable insulated hood
PIPCPC343M6450X-LY/S S
PIPCPC343M6450X-LY/M M
PIPCPC343M6450X-LY/L L
PIPCPC343M6450X-LY/XL XL
PIPCPC343M6450X-LY/2XL 2X
PIPCPC343M6450X-LY/3XL 3X
PIPCPC343M6450X-LY/4XL 4X
PIPCPC343M6450X-LY/5XL 5X
PIPCPC343M6450X-LY/6XL 6X
3M Demo Center of Excellence
Try before you buy—and experience the difference at no cost to you!
Because every job is unique, it can be difficult to know if you are using the right personal protective equipment for the job. Experience the difference 3M can make with our no-cost demo program, allowing you to trial select 3M Versaflo Powered Air Purifying Respirator Systems on site for 30 days. A pre-paid shipping label will be provided with your equipment to allow you to return the product at the end of your 30-day trial.
* Below are examples of 3M’s most popular products in the market today and do not represent the full 3M Demo offering. Customize your system to suit your needs and your environment. Learn more at 3M.com/Versaflo
S-100 Series S-400 Series S-800 Chemical Resistant Series
Series with Hard Hat
Series with Hard Hat and Shroud
Versaflo Blowers
3M™ Versaflo™ TR-300+ Series for use with particulates
3M™ Versaflo™ TR-600 Series for use with particulates and certain organic vapors and acid gases
3M™ Versaflo™ TR-800 Intrinsically Safe* Series for use with particulates and certain organic vapors and acid gases
You can register for a demo at 3M.com/Versaflo. Or, you can contact your local 3M Safety Specialist for more details. You can find out who that is by visiting 3M.com/FindPPERep.
The TR-800 is a PAPR blower UL-certified with an intrinsically safe (IS) rating of Division 1: IS Class I, II, III; Division 1 (includes Division 2) Groups C, D, E, F, G; T4, under the most current standard (UL 60079, 6th Edition, 2013). 3M reserves the right to modify or terminate this program at any time and without notice. 3M and Versaflo are trademarks of 3M. Used under license in US and Canada. © 3M 2024. All rights reserved.
Distributed by:
Contact your local Wesco branch at hazmasters.com/contact to place an order.