Issuu

DIMENSIONS

2X4 AND

2X6X16’

For more information, contact your Sprenger Midwest Sales Representative at 1-800-843-3797.

AND 20’ TOLKO ZINC BORATE TREATED LSL SILL PLATE FROM SPRENGER MIDWEST

These ZB (Zinc Borate) treated products are approved for use as defined in AWPA U1, Use Category UC2. ZB treatment protects the product from termites and fungal decay without compromising structural integrity or consistency of the product. Each piece of Zinc Borate treated 1.35e T-TEC LSL is individually edge sealed in red for easy identification after installation.

Although they may have many uses, a primary application for these items will be for bottom-plate material due to their superior compression strength and dimensional stability –compared to solid wood options.

MILL MONTH OF THE FEATURED

More than a company…a family.

Their Father’s Shed

Gorman Bros Lumber Ltd , founded in 1951 in West Kelowna, British Columbia, has evolved from a modest family venture into a prominent player in the global lumber industry

Origins and Early Development

The company's inception traces back to the harsh winter of 1949-50, which devastated the Gorman family's orchards in British Columbia's Okanagan Valley.

In response, brothers John and Ross Gorman, along with their wives Edith and Eunice, began crafting and selling wooden fruit boxes using leftover wood from nearby sawmills This initiative led to the establishment of their own sawmill in 1953, marking the birth of Gorman Bros. Lumber.

Expansion and Acquisitions

Over the years, Gorman Bros. expanded its operations and product lines. In 1990, the company acquired Downie Timber in Revelstoke, BC, known for its premium cedar, fir, and hemlock products. This acquisition complemented their existing facilities, including Lumby Pole and Oroville.

In 1999, Gorman Bros focused on enhancing the quality of their lumber by constructing a 60,000-square-foot storage facility to keep lumber dry until shipment. They also introduced the Waco Molder, becoming the first to use a moulder to create boards with a furniture-finish edge.

Commitment to Values and Community

Gorman Bros. has consistently emphasized quality, innovation, and community engagement. The company operates in the traditional territories of the Secwepemc, Sylix/Okanagan, and K’tunaxa peoples, fostering respectful relationships with Indigenous communities.

Kelowna, BC

A Partnership Built on Quality and Trust

Sprenger Midwest and Gorman Bros. Lumber

The forest industry has always been — and continues to be built on relationships. It's the people, the passion, the integrity, and ultimately, the friendships that move products from the manufacturer to the market.

At Gorman Bros. Lumber, a familyowned and operated company based in British Columbia, Canada, we produce high-end home finishing and renovation products for discerning end users. But what truly defines us is not just the quality of our lumber it’s the quality of our service, our partnerships, and our people. That’s the heart of our brand.

A brand, after all, is more than just a product. It’s who we are. It’s how we behave, how we interact, and how we are perceived by those we serve and those we work with.

That’s why aligning ourselves with likeminded partners — those who share our values and commitment to excellence is so essential to our success.

“Our relationship with Sprenger Midwest goes back many years and is one we deeply value. The shared commitment to quality, service, and integrity has made this partnership a critical part of our continued growth, and we’re incredibly proud to be part of Sprenger Midwest’s success story as well.“

- Nick Arkle, CEO of Gorman Group

Pictured:

MILL MONTH OF THE

Doug Fir Boards and Pat

1. 1x6 and 1x8 T&G (Pattern 116 side up)

2. 1x6 and 1x8 T&G (Pattern WP4 side up)

3. 2x6 WC-200 V2E Single T&G

4. 1x4 S1S2E (rough-sawn side up)

5. 1x4-1x6-1x8-1x12 S1S2E (smooth side up)

6. 1x8 DF Circle Sawn Nickel Gap

7. 1x8 DF Circle Sawn Nickel Gap (end-view face side up)

8. 1x4-1x6-1x8-1x12 S1S2e (rough-sawn side up)

9. 1x12 S1S2E (smooth side up)

10. 1x4 C&Btr DF Flooring (face side up)

11. 5/8x4 C&Btr DF Beaded Ceiling (face side up)

12. 1x12 S1S2E (rough-sawn side up)

STOCK

NEW&IMPROVED

White

Pelican

Greystone

Rushmore

Dark Slate

Foot Hill Pewter

Iron Ore

Dusty Green

Spanish Moss

Oyster Shell

Cape Cod Gray

Bark Seal Black

Cinnabar

Khaki Brown Eiffel Tower

New Pilgrim Red

NEW Synthetic fiber-based Technology

Wood fiber-based materials have a unique look and feel that have appealed to architects, building professionals, and homeowners for centuries. However, the durability of these materials are negatively impacted by nearly all climates, whether humid or dry, or cold or hot.

RISE Siding and RISE Trim are also manufactured using a fibrous-based technology – RISE® Technology – however, the synthetic fiber-based technology we use makes our wood replacement products look and feel just like real wood. They're also:

Stronger than products made from non-fibrous materials, including wood flour, silica dust and extruded plastics.

More capable of holding up under all weather conditions, including high moisture and severe freeze/thaw conditions, because, like plastic, they will outperform wood, wood flour and silicabased products.

Made in the U.S.A.

AC FIR PLYWOOD

FROM SPRENGER MIDWEST

Sprenger Midwest is proud to stock AC Fir Plywood from Roseburg and PotlatchDeltic.

Sprenger Midwest is currently stocking sizes:

4x8 1/4 AC FIR PLYWOOD

4x8 3/8 AC FIR PLYWOOD

4x8 1/2 AC FIR PLYWOOD

4x10 1/2 AC FIR PLYWOOD 10'

4x8 5/8 AC FIR PLYWOOD

4x8 3/4 AC FIR PLYWOOD

4x10 3/4 AC FIR PLYWOOD 10'

ROUGH CEDAR

Sprenger Midwest is currently stocking sizes:

2X4 ROUGH WRC 8'-20'

2X6 ROUGH WRC 8'-20'

2X8 ROUGH WRC 8'-20'

2X10 ROUGH WRC 8'-20'

2X12 ROUGH WRC 8'-20'

4X4 ROUGH WRC 8'-20'

6X6 ROUGH CEDAR 8'-20'

6X6 ROUGH CEDAR 24’

4X8 WRC ROUGH APPEARANCE 12' - 16' - 20'

4X12 WRC ROUGH APPEARANCE 12' - 16' - 20' - 24'

6X8 WRC ROUGH APPEARANCE 12' - 16' - 20'

6X12 WRC ROUGH APPEARANCE 12' - 16' - 20' - 24'

8X8 WRC ROUGH APPEARANCE 10' - 12' - 16' - 20' - 24'

Rough Cedar

PATRIOT PLYWOODS

Sprenger Midwest is currently stocking sizes:

4x8 1/4" IRON PLY

4x8 1/4"(5.2mm) REVOLUTION PLY

4x8 1/4" Reversible Beadboard

4x4 1/4"(nominal) SURE PLY PREM U/L

4x8 1/4"(nominal) SURE PLY PREM U/L

4x8 1/2"(12mm) DRAWER SIDE PANEL

4x8 1/2"(12mm) REVOLUTION PLY

4x8 3/4"(18mm) REVOLUTION PLY

HARDELPLY SIDING

FROM SPRENGER MIDWEST

4x8 3/8” RGH DOUG FIR S/E

4x8 3/8 x 8' RGH SAWN S/E CLR HARDELPLY

4x9 3/8 x 9' RGH SAWN S/E CLR HARDELPLY

4x10 3/8 x 10' RGH SAWN S/E CLR HARDELPLY

4x8 1/2 x 8' RGH SAWN S/E CLR HARDELPLY

4x8 5/8 x 8' T1-11 4" OC DOUG FIR

4x9 5/8 (9') T1-11 4" OC DOUG FIR

4x8 5/8 x 8' T1-11 8" OC DOUG FIR

4x9 5/8 (9') T1-11 8" OC DOUG FIR

4x8 5/8 x 8' RB&B 12" OC DOUG FIR

4x9 5/8 (9') RB&B 12" OC DOUG FIR

4x8 5/8 x 8' RGH SAWN S/E CLR HARDELPLY

4x8 5/8 x 8' RGH SAWN 4"OC CLR HARDELPLY

4x9 5/8 x 9' RGH SAWN 4"OC CLR HARDELPLY

4x8 5/8 x 8' RGH SAWN 8"OC CLR HARDELPLY

4x9 5/8 x 9' RGH SAWN 8"OC CLR HARDELPLY

4x8 5/8 x 8' RB&B 12"OC RGH CLR HARDELPLY

4x9 5/8 x 9' RB&B 12"OC RGH CLR HARDELPLY

DOUG FIR TIMBERS

FROM SPRENGER MIDWEST

Sprenger Midwest is currently stocking sizes:

10x10 #1 DF Rough GRN FOHC 12' - 16' - 20'

2x6 DF STK T & G V-Joint / SQ Back KD 12' - 16' - 20'

3x12 #2/BTR KD DOUG FIR S4S 16' - 20'

4x4 #2/BTR DOUG FIR S4S KD 8' - 20'

4x6 #2/BTR DOUG FIR S4S KD 8' - 20'

6x6 #1 GRN DOUG FIR S4S 12' - 16' - 20'

6x6 #1 ROUGH GRN DF FOHC 12' - 16' - 20'

6x12 #1 DF GRN Rough FOHC 12' - 16' - 20'

8x8 #1 KD S4S DOUG FIR FOHC 12' - 16' - 20'

8x8 #1 DF Rough GRN FOHC 10' - 12' - 16' - 20'

8x12 #1 DF Rough GRN FOHC 12' - 16' - 20'

Doug Fir

LOG SIDING

FROM SPRENGER MIDWEST

White Fir (Smooth)

Sprenger Midwest is currently stocking sizes:

2X6 SPF PREM T & G 8' - 20'

2x8 SPF MTN HEWN LOG SIDING 8' - 20'

2x8 WF SMOOTH Sierra Prem LOG CABIN 8' - 20'

8" X 10' V-NOTCH CORNER - HAND HEWN PINE

3 X 4 X 16' TRIM - HAND HEWN PINE

Forover50years,Shakertownhasbeen beautifyingandprotectinghomesacross NorthAmerica.That'saclaimfewother sidingmaterialscanmake.Withatrack recordthatextendsahalfacentury,our historyspeaksforitself.

Madewith100%clearverticalgrain heartwoodcedar,nothingelsecompares totherichappearanceandoutstanding performanceofourcedarshinglepanels.

Asthebusinessexpanded,theirfocus wasoneaseofinstallation.Thisgoalled totheinventionoftheshinglepanel system.Today,theirCraftsmanShingle Panelcanbeinstalled10xfasterthan individualshinglesandstilluse100% verticalgraincedarfullylaminatedto exteriorgradebackerinplywood presses.

Inadditiontotheshinglepanelsystem, ShakertownintroducedtheDollyVarden T&Gproductin2015.Thisengineered cedarT&Ghasaclear,100%vertical graincedarfacethatis1/8"thick.The tongueistwiceasstrongassolidcedar, sothereisnosplittingwhenpneumatically nailing.Asinnovationcontinues,Shakertown continuestobeontheforefront

Intheearly1950'sthecompanymoved toWinlock,WAtobeclosertothe cedarresources

Fastforwardto1992,Shakertown waspurchasedbyTheClarkeGroupof MissionBC

Benderboard

by Stimson Lumber

Benderboard is a hardboard product used for concrete forming applications, similar to lap siding. Stimson benderboard is a thinner, lighter, less expensive option that bends easier (for a tighter radius) than most competing products.

0.230” x 49” x 192” 50 pc. Units

0.230” x 12” x 192” 200 pc. Units

0.230” x 6” x 192” 400 pc. Units

*Custom width cutting upon request.

NEW! Finger-Jointed Laminated Columns

By Diamond K Posts

Glued with Waterproof Glue Engineered by Timber Tech

Made with #1 KD Southern Yellow Pine .60 CCAKDAT on lower end with a 50-yr warranty on treatment.

Only the best raw materials are used in Diamond K Posts and we start with #1 Southern Pine lumber for both treated and untreated portions of the column. The bottom treated part of the column is protected against rot, decay and insect damage (.60 CCA).

SPECIALTY STRUCTURAL FRAMING COLUMNS

Individual plys have more complete treating than larger solids. Straighter, stronger and lighter columns greatly reduce labor cost in field as well as eliminate call backs. Posts won't crack or split and are of uniform dimensions with lumber planned to specific sizes

Untreated portion on upper end eliminate the need for hot-dipped, galvanized nails. Longer lengths available in a minimal amount of time from placement of order.

Individual plys can be notched for a superior truss bearing connection.

Adhesive between plys greatly cut down on interior layer slip resulting in better weak-axis stiffness.