July Dimensions by Sprenger Midwest by Sprenger Midwest

DIMENSIONS

Great Outdoor Living Spaces

START WITH ARMADILLO EVOLUTION SERIES COMPOSITE DECKING

PICTURED: STEEL WOOL

White

Pelican

Greystone

Rushmore

Dark Slate

Foot Hill Pewter

Iron Ore

Dusty Green

Spanish Moss

Oyster Shell

Cape Cod Gray

Bark Seal Black

Cinnabar

Khaki Brown Eiffel Tower

New Pilgrim Red

NEW Synthetic fiber-based Technology

Wood fiber-based materials have a unique look and feel that have appealed to architects, building professionals, and homeowners for centuries. However, the durability of these materials are negatively impacted by nearly all climates, whether humid or dry, or cold or hot.

RISE Siding and RISE Trim are also manufactured using a fibrous-based technology – RISE® Technology – however, the synthetic fiber-based technology we use makes our wood replacement products look and feel just like real wood. They're also:

Stronger than products made from non-fibrous materials, including wood flour, silica dust and extruded plastics.

More capable of holding up under all weather conditions, including high moisture and severe freeze/thaw conditions, because, like plastic, they will outperform wood, wood flour and silicabased products.

Made in the U.S.A.

We offer a wide range of screws in 1lb and 5lb buckets, along with bulk boxes. We have planogram offerings from 4ft to 16ft ready to ship. We can tailor any WoodPro planogram for each unique market. If a specific fastener does not perform well in your market, we’ll fill the planogram with a fastener that does. Our packaging has a bright full color label and transparent plastic so your customers know what’s in the bucket before they make a purchase.

PPG E-COAT, WHY IT’S BETTER

PPG E-Coat is superior to other types of coating because it allows for a thinner coat while still maintaining over 1,000 hours of salt spray protection. The thinner coating provided by PPG also eliminates recess and thread fill so you know your bit will always fit securely. The coating is extremely durable in all weather applications and will not chip or rub off. PPG coating is rated for use in treated lumber.

All WoodPro bits are 50mm and are offered in 2-packs, 100packs or a 5 piece multi pack with plastic holder.

SCREWS

ALL PURPOSE SCREWS

#8 x 1-1/4"

#8 x 1-1/2"

#9 x 1-1/2"

#8 x 2"

#9 x 2"

#9 x 2-1/2"

#10 x 2-1/2"

#9 x 2-3/4"

#9 x 3-1/8"

#10 x 3-1/8"

#9 x 3-1/2"

#10 x 3-1/2"

#10 x 4"

WoodPro All Purpose Screws are coated by PPG Industries with a superior 1,000 hour Electro-Polyseal coating for consistent layering that prevents recess fill while offering superior corrosion protection. The secure STAR drive helps reduce bit slippage and a sharp Type-17 point provides quick starting and effortless drilling. Special nibs under the head provide a clean countersink in all types of material For interior and exterior use

#20 Star

#25 Star

#20 Star

#25 Star

Type-17

#10 x 4-3/4"

#12 x 5-5/8"

#12 x 6-3/8"

#12 x 7-1/4"

#12 x 8"

#12 x 10"

#12 x 12"

#25 Star

Type-17

CABINET SCREWS

#8 x 1-3/4”

#8 x 2-3/4"

#8 x 3-1/8”

AP8X114-1

AP8X112-1

AP9X112-1

APSS9X112-1

AP8X2-1

AP9X2-1

APSS9X2-1

AP9X212-1

APSS9X212-1 N/A

AP9X234-1

AP9X318-1 N/A

APSS10X318-1

AP9X312-1 N/A

AP10X4-1

AP10X434-50

AP12X558-50

AP12X638-50

AP12X714-50

AP12X8-50

AP12X10-50

AP12X12-50

AP8X114-5

AP8X112-5

AP9X112-5 N/A

AP8X2-5

AP9X2-5 N/A

AP9X212-5 N/A

AP10X212-5

AP9X234-5

AP9X318-5

AP10X318-5 N/A

AP9X312-5

AP10X312-5

AP10X4-5

AP8X114-5M

AP8X112-5M

AP9X112-2M N/A

AP8X2-3 5M

AP9X2-2M N/A

AP9X212-2M N/A

AP10X212-1 5M

AP9X234-2M

AP9X318-1M

AP10X318-1M N/A

AP9X312-1M

AP10X312-1M

AP10X4-1M

AP10X434-800

AP12X558-600

AP12X638-1M

#20 Star

WoodPro Cabinet Screws are coated by PPG Industries with a superior 1,000 hour Electro-Polyseal coating for consistent layering that prevents recess fill while offering superior corrosion protection. The secure STAR drive helps reduce bit slippage and a sharp Type-17 point provides quick starting and effortless drilling.

Type-17

CB8X134-1

CB8X234-1

CB8X318-1

CB8X134-5

CB8X234-5

CB8X318-5

1/4 X 1-1/2"

1/4 X 2"

1/4 X 2-1/2"

1/4 X 3-1/8"

1/4 X 3-1/2"

5/16 X 2-1/2"

5/16 X 3-1/8"

5/16 X 3-1/2"

5/16 X 4"

5/16 X 5-1/8"

5/16 X 6"

3/8 X 7-1/4"

3/8 X 8"

3/8 X 10"

SCREWS

WASHER HEAD SCREWS (INTERIOR/EXTERIOR) (INTERIOR/EXTERIOR)

#7 x 1-1/2”

#7 x 2”

#7 x 2” (

#7 x 2-1/2”

( #7 x 3-

1/8” #7 x 3-1/8” ( #9

x 3”

WoodPro Washer Head Screws are building code compliant and can be used in a wide variety of interior and exterior applications. The 1,500 hour Electro-Polyseal coating by PPG Industries eliminates recess fill and offers industry leading corrosion protection. It is rated for use in ACQ and other treated lumber. The secure STAR drive helps reduce bit slippage and a sharp Type-17 point with a patented ASTER thread provides quick starting and effortless drilling

CCRR-0350

Control No 5018255

Certified To. ICC-ES AC 233 & ICC-ES AC 257

Refer to the Intertek Directory of Building Products (https://bpdirectory.intertek.com) for detailed information.

Type-17

Star

Type-17

TRIM HEAD SCREWS

ST14X112-50PC

ST14X2-50PC

ST14X212-50PC

ST14X318-50PC

ST14X312-50PC

ST516X212-25PC

ST516X318-25PC

ST516X312-25PC

ST516X4-25PC

ST516X518-25PC

ST516X6-25PC

ST38X714-25PC

ST38X8-25PC

ST14X112B

ST14X2B

ST14X212B

ST14X318B

ST14X312B

ST516X212B

ST516X318B

ST516X312B

ST516X4B

ST516X518B

ST516X6B

ST38X714B

ST38X8B

ST38X10B

WoodPro Trim Head Screws are coated by PPG Industries with a superior 1,000 hour Electro -Polyseal coating for consistent layering that prevents recess fill while offering superior corrosion protection. The secure STAR drive helps reduce bit slippage and a sharp Type-17 point provides quick starting and effortless drilling The small head and thin shank are designed to prevent mushrooming and help conceal the fastener. For interior and exterior use.

#10 Star

Star

Star #25 Star

TH7X112-1

TH7X2-1

TH7X2W-1

TH7X212-1

TH7X212W-1

TH7X318-1

TH7X318W-1

ST38X10-25PC TH7X112-5

COMPOSITE DECK SCREWS

#10 x 2-1/2”

#10 x 2-1/2” #10 x 2-1/2”

#10 x 2-

#6 X 1"

#6 X 1-1/4"

#6 X 1-1/4" (Fine Thread)

#6 x 1-5/8”

#6 x 1-5/8” (Fine Thread)

#6 x 2”

#8 x 2-1/2”

CD10X212T-1

CD10X212G-1

CD10X212RR-1

CD10X212B-1

PHOSPHATE COATED DRYWALL SCREWS (EXTERIOR) (INTERIOR) (INTERIOR)

WoodPro Composite Deck Screws are coated by PPG Industries with a superior 1,000 hour Electro-Polyseal coating for consistent layering that prevents recess fill while offering superior corrosion protection. The secure STAR drive helps reduce bit slippage and a sharp Type-17 point provides quick starting and effortless drilling Dual threads prevent mushrooming while the color matched PPG coating conceals the fastener.

CD10X212T-5

CD10X212G-5

CD10X212RR-5

CD10X212B-5

WoodPro Drywall Screws are phosphate coated and offer minimal corrosion protection Our Drywall screws feature a coarse thread that helps prevent pop-out. A sharp Type-A point aids in quick starting and effortless drilling. These screws are for interior use only and should not be used in treated lumber.

#8 x 3” #2 Philips #2 Philips #2 Philips

#8 x 1/2”

Type-A

Type-A Type-A

Type-A

Grey/Black Grey/Black Grey/Black Grey/Black Grey/Black Grey/Black Grey/Black Grey/Black

DWPC6X1-1

DWPC6X114-1 N/A

DWPC6X158-1 N/A

DWPC6X2-1

DWPC8X212-1

DWPC8X3-1

DWPC6X1-5

DWPC6X114-5 N/A

DWPC6X158-5 N/A

DWPC6X2-5

DWPC8X212-5

DWPC8X3-5

MODIFIED TRUSS HEAD SCREWS

DWPC6X1-10M

DWPC6X114-8M

DWFT6X114-8M

DWPC6X158-5M

DWFT6X158-5M

DWPC6X2-3 5M

DWPC8X212-2 5M

DWPC8X3-2M

WoodPro Modified Truss Head screws are zinc coated with a self-tapping point that easily drives

into 20-25 gauge steel studs.

MT8X12-5

MAGNI Coating)

WE OFFER 2’,

4’, 8’, 16’

DISPLAYS

We have planogram offerings from 2 feet to 16 feet. Because each market is different, any one of our planograms can be customized to suit your specific needs. We want you to stock products that you can sell. Contact your distributor for more information.

3100Fb_ 2.0E LVL

NEW! Finger-Jointed Laminated Columns

By Diamond K Posts

Glued with Waterproof Glue Engineered by Timber Tech

Made with #1 KD Southern Yellow Pine .60 CCAKDAT on lower end with a 50-yr warranty on treatment.

Only the best raw materials are used in Diamond K Posts and we start with #1 Southern Pine lumber for both treated and untreated portions of the column. The bottom treated part of the column is protected against rot, decay and insect damage (.60 CCA).

SPECIALTY STRUCTURAL FRAMING COLUMNS

Individual plys have more complete treating than larger solids. Straighter, stronger and lighter columns greatly reduce labor cost in field as well as eliminate call backs. Posts won't crack or split and are of uniform dimensions with lumber planned to specific sizes

Untreated portion on upper end eliminate the need for hot-dipped, galvanized nails. Longer lengths available in a minimal amount of time from placement of order.

Individual plys can be notched for a superior truss bearing connection.

Adhesive between plys greatly cut down on interior layer slip resulting in better weak-axis stiffness.

Forover50years,Shakertownhasbeen beautifyingandprotectinghomesacross NorthAmerica.That'saclaimfewother sidingmaterialscanmake.Withatrack recordthatextendsahalfacentury,our historyspeaksforitself.

Madewith100%clearverticalgrain heartwoodcedar,nothingelsecompares totherichappearanceandoutstanding performanceofourcedarshinglepanels.

Asthebusinessexpanded,theirfocus wasoneaseofinstallation.Thisgoalled totheinventionoftheshinglepanel system.Today,theirCraftsmanShingle Panelcanbeinstalled10xfasterthan individualshinglesandstilluse100% verticalgraincedarfullylaminatedto exteriorgradebackerinplywood presses.

Inadditiontotheshinglepanelsystem, ShakertownintroducedtheDollyVarden T&Gproductin2015.Thisengineered cedarT&Ghasaclear,100%vertical graincedarfacethatis1/8"thick.The tongueistwiceasstrongassolidcedar, sothereisnosplittingwhenpneumatically nailing.Asinnovationcontinues,Shakertown continuestobeontheforefront

Intheearly1950'sthecompanymoved toWinlock,WAtobeclosertothe cedarresources

Fastforwardto1992,Shakertown waspurchasedbyTheClarkeGroupof MissionBC

STOCK

NEW&IMPROVED

An Authorized Gorman Pine Distributor Since 2002

Dear Sprenger Midwest/Gorman Pine Customer,

It has been our privilege and pleasure to be an authorized Gorman Brothers Pine Board/Pattern distribution partner for more than 20 years - serving customers in 7 states through our Sioux Falls, SD, Lincoln NE and more recently, Moorhead MN locations.

Over those 20+ years, we have invested heavily – working directly with Gorman - to market and build the brand to show you that Gorman truly makes the world’s finest boards Through numerous plant and mill tours to Gorman’s Canadian and US manufacturing facilities, to the mountains of samples and product education at the yardlevel, to the vast inventories of product we carry at each of our locations in the dedicated facility space we’ve built to house them, Sprenger Midwest has put in the time, effort and investment in Gorman Pine, and we thank you, our loyal customers for supporting us all these years with your business on those products.

Again, we thank you for your past business on Gorman Pine from Sprenger Midwest, as well as on all of our other lines, and we look forward to serving you on them for many decades into the future.

The Sales and Marketing Team at Sprenger Midwest

THERE’S GOOD,THEN THERE’S GORMAN.

When selecting materials for your project, we want you to be able to choose from a variety of quality options. Our lumber is always carefully graded to ensure that you’re getting the best product for your needs. Every Gorman board:

• Is graded above NLGA and WWPA industry standards.

• Has a furniture finish and eased edges that are smooth and splinter-resistant.

• Is heat-treated and kiln-dried to ensure stability and a flat surface.

THE GORMAN EDGE IN TECHNOLOGY

From the forest to the finished product, we utilize the latest technology to produce every Gorman board. With over 70 years of experience and advanced drying technology in our kilns, we produce flat boards that are highly stable. Our finishing lines also incorporate geometric grade scanners powered by Deep Learning AI, further enhancing the consistency and quality of each piece of lumber.

PROFILES

Our T&G pattern profiles are offered in 4”, 6”, and 8” widths, and in Elite, Craftsman, and Clear Select grades. These pattern profile products are crafted with the same care, commitment to quality, and high standards as our other grades of lumber.

POPULAR PROFILES

*More profiles available

ENDMATCHING

By choosing one of our three endmatch profiles, you can add an extra edge of beauty to your pattern This gives your project a professional finish while helping to eliminate waste by removing the need to meet the stud.

EM PATTERN

Flush finish on both faces.

EM BEVEL

Beveled finish on top face.

EM 2 BEVEL

Beveled finish on both faces.

AVAILABLEIN2’-8’ END-MATCHEDLENGTHS.

Benderboard

by Stimson Lumber

0.230” x 49” x 192” 50 pc. Units

0.230” x 12” x 192” 200 pc. Units

0.230” x 6” x 192” 400 pc. Units

*Custom width cutting upon request.

PRODUCTS

SPF, HF, DF and SYP

Hiline/Prem #2, Select

Structural and MSR Lumber

2x4 and 2x6 8’-9’-10’ PET #2/Studs

Cedar Knotty and Clear Patterns and Bevel Sidings

MCA and CCA Treated Lumber and Plywood

1x2, 1x3 and 2x2x8 Furring Strips

4x8, 4x9 and 4x10 OSB

Sheathing and Flooring

Prefinishing Services with PPG Coatings

5.25” to 24” Deep 2.0E LVL

3 5”, 5 5”, 7 25” and 11-7/8”

RL and PET 1.35E LSL

Particle Board Panels, Shelving and Stepping

4x8 and 4x9 SYP, Fir and Cedar T1-11 Plywood Sidings

Log Cabin Siding and Accessories

Finex Foundation Panels

Stimson Benderboard Concrete Form

Doug Fir Smooth and Rough Timbers

Primed Poplar 1x6 and 1x8 Pattern Boards

LP Weather Logic Sheathing

2x6 – 2x12 22’-28’ Doug Fir

Fir and SYP Plywood Sheathing, Sanded and Underlayment

Cedar S4S and Rough Lumber and Timbers

Century Aluminum Rail Systems

Fire Treated Lumber and Plywood

Cedar Shakes and Shingles

Gorman Pine Boards and Pattern Stock

Rise Composite Siding and Trim

9 5”, 11-7/8” and 14” IJoists

OSB Rimboard and Stepping Armadillo Composite Decking

Tom’s Hardwood Lumber –Oak, Maple, Poplar, Hickory and Alder

Shakertown Products

Laminated Columns

Hoft Privacy Fence Systems

Hardwood Plywood

Clear Coated 1x6 WP4 Pine, Alder and Hickory

LP FlameBlock OSB

DuraColor Cedar-Tone MCA Treated Decking Materials

Iron Ply, RevBead, Sureply and Revolution Ply

WoodPro Screws