APV Cast Steel Gate, Globe & Check Valves Overview Catalogue

GATE, GLOBE & CHECK VALVES - CAST STEEL

O V E RV I E W BROCHURE

API 600 API 624 API 594 API 6D ASME B16.34

ISO 15848-1 & API 622 Fugitive Emission Certified

API 607 & ISO 10497 Firesafe Certified

www.australianpipelinevalve.com.au

QUALITY VALVE MANUFACTURER

QUALITY COMMITMENT Quality is Our First Priority.

Consistent product quality and a proven track record makes Australian Pipeline Valve a dependable choice for cast Gate, Globe and Check Valves, where total reliability is the number one concern.

Since its founding, APV’s philosophy has been focused on quality. Our valves are manufactured in full compliance to worldwide standards (such as ASME/ANSI, API, EN, ISO, BS, AS).

70-78 Stanbel Road Salisbury Plain South Australia 5109 Telephone +61 (0)8 8285 0033 email: admin@australianpipelinevalve.com.au

www.australianpipelinevalve.com.au

OVERVIEW

API 600 CAST STEEL VALVES Cast steel valves are designed and manufactured to conform with API, ASTM, ANSI and other applicable internationally recognised standards, to possess all the qualities to meet with stringent requirement criteria of petroleum, petro-chemical and general industrial applications.

Valves are tested in accordance with applicable API standards.

Full traceability is maintained. areas.

Seat Ring (welded)

Seat Ring (threaded)

Connection of stem to wedge

Lantern ring and packing

Valves offer the option of hard facing on the wedge (disc) and seating Gate Valves are optionally available with lantern rings. These rings along with double packing provide a leak-off connection. Alongside are illustrations of lantern rings as well as disc connection. Fugitive emission packing sets do normally need a lantern ring.

FUGITIVE EMISSION SERVICE APV offers fugitive emission service valves on special request. The valves comply with environmental protection requirements. APV fugitive emission valves are designed, manufactured and tested to meet less than 100ppm with packing conforming to API 622 and valve design tested to API 624 and ISO 15848-1. Furthermore, optional live-loading of packing bolts is available. Two sets of belleville plate springs maintain a permanent packing stress of 24,000-28,000 kPa. Live-loading extends low emission service life especially in service with high pressure/temperature transients.

The stem on all APV fugitive emission service valves is surface finished to ≤Ra 0.80 µm.

Straightness and roundness are precisely controlled. The stuffing box has a maximum ≤Ra 3.2 µm surface finish. Cylindricity and verticality are precisely controlled.

GENERAL DESIGN SPECIFICATIONS STANDARD Shell wall thickness and general valve design specifications

API 600 (Gate Valves) API 603 (Gate Valves) API 594 (Check Valves) API 623 (Globe Valves)

Pressure-temperature ratings Face-to-face & End to end dimensions

ANSI B16.34 ANSI B16.10

Flanged end dimensions

ANSI B16.5*

Welding end dimensions

ANSI B16.25

*Valves 700NB (28”) and larger according to MSS SP-44 or API 605 are available.

LIVE LOADING Live Loading is an addition of spring washers to the gland studs to maintain the packing load of the valve over time.

BELLOW SEAL The bellow seal replaces the dynamic sealing system of a stem packing by a static sealing system between the valve bonnet and the valve stem bottom. It prevents the valve from the risk of leakage from the valve packing for VOC or toxic services.

For the full detailed catalogue go to the APV website.

AU S T R A L I A N P I P E L I N E VA LV E

Bellows Seal Option

3

FIGURE NUMBER SYSTEM

FIGURE NUMBER SYSTEM EXAMPLE 150FZAP125QTISN-9PBWG-FA

Bonnet gasket: Blank Standard:- SS + GRP (BB), Pressure Seal Ring (PSB).

N/A:- (WB). A SS + PTFE B S31803 + PTFE C PTFE D SS + PTFE + GRP E Ring G S31803 + GRP Z Special Stem packing: Blank Standard:- Graphite. N/A:- (Check Valves) F Fugitive Emission GRP I Fugitive Emission PTFE J Special L Live Loaded P Graphite + PTFE T PTFE Denotes special suffix - Packing/Gasket Operator: Blank Handwheel or N/A A Actuator C Counter-Weight D Dampner G Gear H Hammer Blow Handwheel L External Lever End connection: Blank RF (B16.5) BA RF B16.47A (MSS SP44) BB RF B16.47B (API 605) RJ RTJ BW Buttweld FF Flat Face SP is special drilling UD Undrilled UM Unmachined for RF/RJ Bonnet: Blank Bolted C Cryogenic H Pillar & Bridge L Low Temperature Ext. P Pressure Seal S Bellows Sealed T Threaded W Welded Body material: - see page 5. (WCB is Blank) Denotes special suffix - Body/Bonnet/Ends/Operator Blank Non NACE N NACE C Cryogenic Blank Standard Configuration (Example Solid Wedge) A S Bend Globe D Globe-Stop Check DG Globe - Stop Check Guided F Flexible Disc Gate J Slab Gate K Expanding Gate L Lever (Swing Check) P Full Opening Swing Check (API 6D) Q Full Opening Piston Check (API 6D) R Right Angle S Parallel Slide Y Inclined Bonnet Z c/w Spring Denotes trim - Code & Modifier (see below) Basic identifier number denoting valve class and valve type (As shown in catalogue) Prefix: Blank APV FZV APV-FZV J.V. Valve Size

TRIM CODES BODY SEAT SURFACE

DISC SURFACE

STEM

BACK SEAT (STUFFING BOX)

TRIM CODE(1)

B

Bronze

Bronze

Bronze

Bronze

C

AL-Bronze

AL-Bronze

AL-Bronze

AL-Bronze

D

Monel(1)

Monel(1)

Monel

Monel

E

F51(1)

F51(1)

F51

F51

G

F55(1)

F55(1)

F55

F55

H

Hastelloy B(1)

Hastelloy B(1)

Hastelloy B

Hastelloy B F316(6)

L

F316(1)(6)

F316(1)(6)

F316(6)

M

F316L(1) (6)

F316L(1) (6)

F316L(6)

F316L

N

Alloy 20(1)

Alloy 20(1)

Alloy 20

Alloy 20

P

F304(1) (7)

F304(1) (7)

F304(7)

F304

Q

F304L(1) (7)

F304L(1) (7)

F304L(7)

F304L Alloy 625

R

Alloy 625(1)

Alloy 625(1)

Alloy 625

V

F53(1)

F53(1)

F53

F53

W

F347(1)

F347(1)

F347

F347

Blank

F6a/F6/410

F6a/F6/410

F6a/F6/410

F6a/F6/410

Z

Special(1)

Special(1)

Special

Special

EN

ENP

ENP

(2)

(2) (3)

GE(5)

Stellite #6

Stellite #12

17-4 PH

Stellite #6 -

MODIFIER

I

-

-

17-4 PH

M

-

-

Monel

-

T

+PTFE Seat

-

-

-

U**

Stellite

Stellite

(2)

(2) (3)

X

(4)

(4)

(4)

(4)

XU**

Stellite

(2)

(2)

(2) (3)

Z

-

-

Special

-

(1) Add modifier below if applicable. (2) As per trim code above or stellite (refer dwg). (3) Or Integral as per body. (4) API trim code #1 only. (5) Geothermal trim. (6) Can be dual certified 316/316L. (7) Can be dual certified 304/304L. ** The base material is same or equivalent to body.

4

AU S T R A L I A N P I P E L I N E VA LV E

OVERVIEW

VALVE SELECTION CRITERIA GATE VALVES Gate valves are used for bi-directional shut off applications where minimum pressure drop is required. They are not designed for throttling service.

Gear operators, actuators, by-passes, actuators etc, can be fitted on request.

Parallel slide style also available.

GLOBE VALVES Globe valves are ideal for throttling and shut off. They can be used for shut off service, but do have a higher pressure drop and seat leakage allowance than gate valves.

Globe valves should not be used for prolonged throttling at less than 10% open.

Gearboxes, actuators, bypasses etc, can be fitted.

RATINGS Valves must only be used in operating conditions within the correct ANSI pressure-temperature ratings for valve class rating and body/bonnet material.

TEMPERATURE LIMITATIONS Only use valves within the correct temperature limitations of their construction.

Temperature limitations of body/bonnet materials, trim, bolting, packing and gaskets must all be considered.

AU S T R A L I A N P I P E L I N E VA LV E

5

OVERVIEW

VALVE SELECTION CRITERIA STOP CHECK VALVES Stop check valves are combination globe and check valves. In the open position, they function as a lift check valve. In the closed position, they are seated by manually closing the stem like a globe valve. Stop check valves must be installed vertically (in a horizontal pipeline). They provide positive shutoff in either direction when the stem is in the closed position.

Right angle and inclined ‘Y’ style are also available.

SWING CHECK VALVES Swing check valves are used to prevent flow reversal. They are suitable for service in horizontal or upwards vertical. They have low pressure drop and are best suited for moderate velocity applications. Either too low a line velocity or too high a velocity can damage valve internals and shorten valve life hence correct size selection is important. Service in systems involving rapid and frequent flow reversals, pulsation or turbulent flow should be avoided.

Also API 6D full opening (piggable) type available on request.

Pressure Seal Bonnet Non Rotating Stem & Live Loaded Packing The torque arm design guides and centralises the stem and prevents stem movement which reduces wear on packing rings & enables better sealing as well as reducing torque. Only the stem nut rotates. The arm also provides visual stem position indication & can be interfaced with position switches. Optional live loaded packing system is shown.

6

AU S T R A L I A N P I P E L I N E VA LV E

GATE VALVES

GATE VALVES ANSI CLASS 150 - 1500 MATERIAL OPTIONS & DIMENSION SUMMARY STANDARDS

18 17 19

16

20

15

21

14

22

13 12 11 10 9 8 7 6

Face to Face Dimensions

ASME B16.10

End Flange Dimensions

ASME B16.5

Buttwelding Ends

ASME B16.25

Shell Wall Thickness

API 600*

Basic Design

API 600*

Test

API 598 / ISO 5208

Stuffing Box Smoothness

≤Ra 3.2 µm (superior to API 600)

Stem Smoothness

≤Ra 0.80 µm

5 4 3 2

*ISO 10434

1

23

All material to ASTM Standard

MATERIAL LIST Part Name

­­No.

Carbon Steel WCB

APV Suffix Code 1

Body

2

Seat Ring

3

Wedge

Alloy Steel

LCB

LCC

C5

WC6

WC9

CF8

CF8M

CF3

CF3M

1

2B

2

5

6

7

8

8M

0

4

A352 LCC

A217 C5

A350 LF2

A182 F304/316

A216 WCB A216 WCC A352 LCB A105

Stainless Steel

WCC

A105

A350 LF2

A216 WCB A216 WCC A352 LCB A182 F304/316

A217 CF8/ CF8M A182 F304/316

A217 C5

A217 WC6 A217 WC9 A351 CF8 A351 CF8M A351 CF3 A351 CF3M A182 F304/316

A182 F304/316

A182 F304 A182 F316 A182 F304L A182 F316L

A217 WC6 A217 WC9 A351 CF8 A351 CF8M A351 CF3 A351 CF3M

A182 F304/316

A182 F304/316

A182 F304/316

4

Stem

5

Bonnet Bolt

6

Bonnet Nut

7

Gasket

8

Bonnet

A216 WCB A216 WCC A352 LCB

A352 LCC

A217 C5

9

Backseat Bushing

A182 F6

A182 F6

A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L

10

Stem Packing

11

Lantern*

12

Pin

13

Gland

A182 F6

A182 F6

A182 F6

A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L

14

Gland Flange

A216 WCB A216 WCC A352 LCB

A352 LCC

A217 C5

15

Gland Eyebolt

16

Gland Nut

A194 2H

17

Stem Nut

A439D2 (Austenitic DI)

18

Retaining Nut

Carbon Steel or Alloy Steel

19

Hand Wheel

Ductile Iron or Carbon Steel

20

H.W. Lock Nut

21

Yoke

22

Nipple

23

Seat/Wedge Facing

A182 F6

A182 F6

A193 B7

A320 L7 A194 2H

Solid metal serrated gasket

A182 F6

A193 B16 A194 4

A320 B8 A194 7

Stainless Steel & Graphite wound

A182 F6

A182 F304 A182 F316 A182 F304L A182 F316L A193 B8M A194 8

Non-metallic gasket

Stainless Steel or Soft Iron Ring Gasket

A217 WC6 A217 WC9 A217 CF8 A351 CF8M A351 CF3 A351 CF3M

Braided/Flexible Graphite or PTFE A182 F6

A182 F6

A182 F6

A182 F6

A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 304L A182 F316L

Carbon Steel Stainless Steel Alloy Steel A182 F6

A307 B

A307 L7

A217 WC6 A217 WC9 A351 CF8 A351 CF8M A351 CF3 A351 CF3M

A193 B7

A193 B8 A194 4

A193 B8M

A193 B16

A194 8

ZCuA110Fe3 (AL-Bronze)

Carbon Steel Stainless Steel Alloy Steel A216 WCB A216 WCC A352 LCB

A352 LCC

A217 C5

A217 WC6 A217 WC9 A351 CF8 A351 CF8M A351 CF3 A351 CF3M

Copper Alloy or Carbon Steel or Stainless Steel 13Cr

or

16Cr-8Ni

or

HF(Co-CrA)

or

316

or

304

* Lantern Ring where applicable

AU S T R A L I A N P I P E L I N E VA LV E

7

GATE VALVES

GATE VALVES SUMMARY TYPE OF CONNECTION RF and RTJ flange ends to ANSI B16.5 or API 605 and MSS SP-44 standard.

A1

BW flange ends to ANSI B16.25 standard.

TYPE OF OPERATION Non-rising handwheel Gear operator, Electric actuator, Pneumatic actuator A2

to ISO 5210 standard.

DIMENSIONS AND WEIGHT (mm and inch) Class 150 DN NPS A(RF) A1(BW) A2(RTJ) B C RF(kg) BW(kg)

15 1/2 108 4.3 108 4.3 119 4.3 190 7.48 100 3.9 7 6

20 3/4 118 4.6 118 4.6 131 5.1 200 8.3 103 4.1 7 6

25 1 127 5.0 127 5.0 140 5.5 220 8.7 140 5.5 8 7

40 1-1/2 165 6.5 165 6.5 178 7.0 320 12.6 200 8.0 14 10

50 2 178 7.0 216 8.5 191 7.5 400 15.8 200 8.0 18 15

65 2-1/2 191 7.5 241 9.5 203 8.0 490 19.3 200 8.0 28 22

80 3 203 8.0 283 10.5 216 8.5 508 20.0 250 10.0 30 26

100 4 229 9.0 305 12.0 241 9.5 585 23.0 250 10.0 50 40

125 5 254 10.0 381 15.0 267 10.5 740 29.13 300 12.0 72 68

80 3 283 11.13 298 11.8 533 21.0 250 10.0 50 37

100 4 305 12.0 321 12.63 633 24.9 300 12.0 74 54

150 6 267 10.5 403 15.9 279 11.0 773 30.4 300 12.0 85 77

200 8 292 11.5 419 16.5 305 12.0 955 37.63 350 14.0 127 118

250 10 330 13.0 457 18.0 342 13.5 1160 45.8 400 16.0 195 185

150 6 403 15.9 419 16.5 805 31.8 350 14.0 137 110

200 8 419 16.5 435 17.13 1024 40.3 400 16.0 217 174

300 12 356 14.0 502 19.8 368 14.5 1375 54.13 450 18.0 283 270

350 14 381 15.0 572 22.5 394 15.5 1569 61.8 500 20.0 398 370

400 16 407 16.0 610 24.0 419 16.5 1765 69.5 600 24.0 524 500

450 18 432 17.0 660 26.0 445 17.5 1978 77.9 600 24.0 690 650

500 20 457 18.0 711 28.0 470 18.5 2219 87.4 680 27.0 900 880

600 24 508 20.0 813 32.0 521 20.5 2611 102.4 720 28.4 1350 1100

750 30 610 24.0 915 36.0 622 24.5 3197 125.4 800 31.5 2800 2610

900 36 711 28.0 1016 40.0 725 28.5 3737 147.1 800 31.5 3820 3600

500 20 991 39.0 1010 39.8 2238 86.4 720 28.4 1655 1500

600 24 1143 45.0 1165 45.9 2623 102.5 800 31.6 2320 2100

Class 300 DN NPS A-A1 (RF-BW) A2(RTJ) B C RF(kg) BW(kg)

15 1/2 140 5.5 151 5.9 220 8.66 100 3.9 7 5

FLEXIBLE WEDGE

8

20 3/4 152 6.0 165 6.5 230 9.1 100 3.9 6 5

25 1 165 6.5 173 7.0 280 11.42 140 5.5 12 9

40 1-1/2 191 7.5 203 8.0 360 15.35 200 8.0 20 16

50 2 216 8.5 232 9.13 470 18.5 200 8.0 24 20

SOLID WEDGE

65 2-1/2 241 9.5 257 10.3 525 20.8 200 8.0 44 35

125 5 381 15.0 397 15.63 800 31.5 350 14.0 124 100

PARALLEL SLIDE EXPANDABLE

250 10 457 18.0 473 18.63 1232 48.5 450 18.0 337 285

300 12 502 19.8 518 20.4 1460 57.5 500 20.0 580 495

PARALLEL SLIDE SPRING LOAD

AU S T R A L I A N P I P E L I N E VA LV E

350 14 762 30.0 788 30.63 1645 64.8 600 24.0 715 615

400 16 838 33.0 854 33.63 1841 72.5 600 24.0 1050 940

450 18 914 36.0 930 36.63 1988 78.3 680 27.0 1235 1090

SOFT SEAT WEDGE

GATE VALVES

GATE VALVES SUMMARY

DIMENSIONS AND WEIGHT (mm and inch) Class 600 DN NPS

50 2

65 2-1/2

80 3

100 4

125 5

150 6

200 8

250 10

300 12

350 14

400 16

450 18

500 20

600 24

650 26

700 28

750 30

900 364

A(RF)

292 11.5

330 13.0

356 14.0

432 17.0

508 20.0

559 22.0

660 26.0

787 31.0

838 33.0

889 35.0

991 39.0

1092 43.0

1194 47.0

1397 55.0

1448 57.0

1549 61.0

1651 65.0

2083 82.0

A1(BW)

292 11.5

330 13.0

356 14.0

432 17.0

508 20.0

559 22.0

660 26.0

787 31.0

838 33.0

889 35.0

991 39.0

1092 43.0

1194 47.0

1397 55.0

1448 57.0

1549 61.0

1651 65.0

2083 82.0

A2(RTJ)

295 333 359 435 511 562 664 791 841 892 994 1095 11.625 13.125 14.125 18.125 20.125 22.125 26.125 31.125 33.125 35.125 39.125 43.125

1200 47.25

1407 55.625

B

441 17.375

489 19.25

530 20.875

C

200 7.875

250 9.875

RF(kg) BW(kg)

50 35

60 45

654 25.75

857 33.75

1530 60.25

1784 70.25

1861 73.25

2156 84.875

2400 94.5

2461 3013 3232 3562 3880 96.875 118.875 127.75 140.25 152.75

4560 179.5

250 300 400 9.875 11.8125 15.75

500 560 690 19.688 22.0625 27.1875

610 24.0

610 24.0

610 24.0

610 24.0

610 24.0

760 30.0

760 30.0

760 30.0

610 24.0

610 24.0

85 65

345 265

845 700

1120 925

1360 1240

1910 1580

2335 1900

2700 2150

4450 3660

5220 4295

6050 4980

6945 5710

10000 8220

135 105

1041 41.0

260 210

1251 49.25

515 380

Class 900 DN NPS

50 2

65 2-1/2

80 3

100 4

125 5

150 6

200 8

250 10

300 12

350 14

400 16

450 18

500 20

600 24

A(RF)

368 14.5

419 16.5

381 15.0

457 18.0

559 22.0

610 24.0

737 29.0

838 33.0

965 38.0

1029 40.5

1130 44.5

1219 48.0

1321 52.0

1549 61.0

A1(BW)

368 14.5

419 16.5

381 15.0

457 18.0

559 22.0

610 24.0

737 29.0

838 33.0

965 38.0

1029 40.5

1130 44.5

1219 48.0

1321 52.0

1549 61.0

A2(RTJ)

371 14.63

422 16.34

384 15.13

460 18.13

562 22.13

613 24.13

740 29.13

841 33.13

968 38.13

1038 40.88

1140 44.88

1232 48.5

1333 52.5

1568 61.75

B

660 26.0

702 27.63

760 31.5

902 35.1

1051 41.34

1137 44.75

1438 56.63

1556 61.25

1715 67.5

1902 74.88

2051 2256 2800 3150 80.75 100.63 110.25 124.0

C

300 300 11.8125 11.81

350 17.69

902 17.69

450 27.19

610 27.19

610 18.13

610 24.0

610 24.0

610 24.0

760 24.0

760 30.0

760 30.0

760 24.0

150 120

220 180

355 285

460 400

800 710

1050 830

1600 1350

2220 1890

3000 2565

3870 3300

4860 4050

7300 6120

RF(kg) BW(kg)

110 90

140 130

Bolted Bonnet

Class 1500 DN NPS

50 2

65 2-1/2

80 3

100 4

125 5

150 6

200 8

250 10

300 12

350 14

400 16

450 18

500 20

600 24

A(RF)

368 14.5

419 16.5

470 18.5

546 21.5

673 26.5

705 27.75

832 32.75

991 39.0

1130 44.5

1257 49.5

1384 54.5

1537 60.5

1664 65.5

1941 76.5

A1(BW)

368 14.5

419 16.5

470 18.5

546 21.5

673 26.5

705 27.75

832 32.75

991 39.0

1130 44.5

1257 49.5

1384 54.5

1537 60.5

1664 65.5

1941 76.5

A2(RTJ)

371 14.63

422 16.63

473 18.63

549 21.63

676 26.63

711 28

841 33.13

1000 39.38

1146 45.13

1276 50.25

1407 55.38

1559 61.38

1686 66.38

1972 77.63

B

660 26.0

702 27.63

860 33.88

937 36.88

1102 43.38

1226 48.25

1422 56.0

1686 66.38

1997 78.63

2162 85.13

2486 2762 3102 3721 97.88 108.75 122.13 146.5

C

300 11.81

400 15.75

450 17.88

500 19.88

690 27.19

610 24.0

610 24.0

760 24.0

760 24.0

760 30.0

915 30.0

915 30.0

RF(kg) BW(kg)

113 90

155 130

195 160

340 240

555 440

735 560

1180 940

2128 1640

3265 2560

4115 3200

6950 6000

9000 7740

11130 16270 9560 13770

AU S T R A L I A N P I P E L I N E VA LV E

Pressure Seal Bonnet

9

GLOBE VALVES

GLOBE VALVES ANSI CLASS 150 - 1500 MATERIAL OPTIONS & DIMENSION SUMMARY

14

15

20

19

18

STANDARDS

16

Face to Face Dimensions

ANSI B16.10

End Flange Dimensions

ANSI B16.5

Buttwelding Ends

ANSI B16.25

Shell Wall Thickness

API 623

Basic Design

ASME B16.34 / API 623

Test

API 598

Stuffing Box Smoothness

≤Ra 3.2 µm (superior to API 623 / API 600)

Stem Smoothness

API 623 / API 600 ≤Ra 0.80 µm

12 11

17

10

13 9 8 7

21

6 5 4 3 2 1

MATERIAL LIST Part Name

No.

Carbon Steel WCC 1

2B

2

5

A216 WCB

A216 WCC

A352 LCB

A352 LCC

A105

A105

A350 LF2

A350 LF2

A350 LF2 A182 F304/316 A182 F6

A352 LCC A182 F304/316 A182 F304

A217 C5 A182 F304/316 A217 C5 A182 F304/316 A182 F304

APV Suffix Code 1

Body

2

Seat Ring

LCB

3

Disc

A105

A216 WCC

4

Stem

A182 F6

A182 F6

5

Disc Nut

A182 F6

A182 F6

6

Gasket

Solid metal serrated gasket

7

Bonnet

8

Bonnet Bolt

9

Bonnet Nut

10

Backseat Bushing

11

Stem Packing

12

Lantern*1

13

Pin

Alloy Steel

WCB

A216 WCB

A216 WCC

LCC

C5

WC9

6

9

A352 LCC

A193 B7

A217 C5

A194 2H

A193 B16 A194 4

A182 F6

A182 F6

A182 F6

A182 F304

A182 F6

A182 F6

A182 F6

A182 F6

A182 F304

A194 7

CF3M

8M

0

3M

A351 CF8M

A351 CF3

A351 CF3M

A182 F304

A182 F316 A182 F304L A182 F316L

A351 CF8

A351 CF8M

A182 F304

A182 F316 A182 F304L A182 F316L

A182 F304

A351 CF3

A351 CF3M

A182 F316 A182 F304L A182 F316L Stainless Steel or Soft Iron Ring Gasket

A351 CF8

A351 CF8M

A351 CF3

A351 CF3M

A182 F304

A182 F316

A182 304L A182 F316L

A182 F304

A182 F316 A182 F304L A182 F316L

A193 B8M

A194 8

A182 F304

Braided/Flexible Graphite or PTFE A182 F304

A182 F304

Carbon Steel Stainless Steel Alloy Steel

14

Gland Flange

A216 WCB

A216 WCC

A352 LCB

A352 LCC

A217 C5

A217 WC6 A217 WC9

A351 CF8

A351 CF8M

15

Gland

A182 F6

A182 F6

A182 F6

A182 F6

A182 F304

A182 F304

A182 F304

A182 F316 A182 F304L A182 F316L

16

Gland Eyebolt

A307 B

A307 L7

A193 B7

17

Gland Nut

A194 2H

18

Stem Nut

A439D2 (Austentic DI)

19

Handwheel

20

H.W. Lock Nut

21

Seat/Disc Facing

A182 F304

A193 B8 A194 4

A193 B8M

A193 B16

A194 8

ZCuA110Fe3 (AL-Bronze)

Ductile Iron or Steel Carbon Steel Stainless Steel Alloy Steel 13Cr

or

16Cr-8Ni

or

HF(Co-CrA) ST#6

*1 Lantern Ring where applicable.

10

CF3

8

A320 B8

A182 F304

CF8M

A351 CF8

Non-metallic gasket

A217 WC6 A217 WC9

A320 L7

A182 F6

CF8

A217 WC6 A217 WC9 A182 A182 F304/316 F304/316 A217 WC6 A217 WC9 A182 A182 F304/316 F304/316 A182 F304 A182 F304

Stainless Steel & Graphite spiral wound

A352 LCB

Stainless Steel

WC6

AU S T R A L I A N P I P E L I N E VA LV E

or

316

or

304

A351 CF3

A351 CF3M

GLOBE VALVES

GLOBE VALVES SUMMARY TYPE OF CONNECTION RF and RTJ flange ends to ANSI B16.5 standard.

BW flange ends to ANSI B16.25 standard.

A1

TYPE OF OPERATION Non-rising handwheel Connection dimensions of Gear actuator, Electric actuator, Hydraulic actuator to ISO 5210 standard.

A2

DIMENSIONS AND WEIGHT (mm and inch) Class 150 DN NPS

15 1/2

20 3/4

25 1

40 1-1/2

50 2

65 2-1/2

80 3

100 4

125 5

150 6

200 8

250 10

300 12

350 14

400 16

450 18

500 20

600 24

A-A1 (RF-BW)

108 4.3

118 4.7

127 5.0

165 6.5

203 8.0

216 8.5

241 9.5

292 11.5

356 14.0

406 16.0

495 19.5

622 24.5

699 27.5

787 31.0

914 36.0

978 38.5

978 38.5

1275 50.2

A2(RTJ)

119 4.7

130 5.2

140 5.5

178 7.0

216 8.5

229 9.0

254 10.0

305 12.0

369 14.5

419 16.5

508 20.0

635 25.0

711 28.0

790 31.0

917 36.0

991 39.0

-

-

B

300 11.8

300 12.2

310 12.2

380 15.0

380 15.0

435 17.1

465 18.3

530 20.9

580 22.9

650 25.6

760 30.0

860 33.9

1000 39.4

1375 54.13

1569 61.8

1300 51.2

1420 55.9

1570 61.81

C

150 6

150 6

150 6

200 8

200 8

250 10

250 10

250 10

300 12

350 14

400 16

500 20

500 20

600 24

600 24

650 26

-

-

RF(kg) BW(kg)

7 6

7 6

8 7

16 13

20 18

26 22

35 28

65 55

90 75

113 93

190 170

238 215

410 370

560 500

890 795

1050 -

1248 -

1950 -

Class 300 DN NPS

15 1/2

20 3/4

25 1

40 1-1/2

50 2

65 2-1/2

80 3

100 4

125 5

150 6

200 8

250 10

300 12

350 14

400 16

A-A1 (RF-BW)

152 6.0

178 7.0

203 8.0

229 9.0

267 10.5

292 11.5

318 12.5

356 14.0

400 15.8

445 17.5

559 22.0

622 24.5

711 28.0

838 33.0

863 34.0

A2(RTJ)

165 6.5

190 7.5

216 8.5

241 9.5

283 11.1

308 12.1

333 13.1

371 14.6

416 16.4

460 18.1

575 22.6

635 25.1

714 28.1

854 23.0

879 34.6

B

280 11.0

300 11.8

340 13.4

380 15.0

425 16.8

465 18.3

530 20.6

610 24.0

695 27.7

790 31.1

870 34.2

1040 41.0

1375 54.13

1380 54.3

1480 58.3

C

150 6

150 6

150 6

200 8

200 8

250 10

250 10

300 12

300 12

400 16

500 20

500 20

500 20

700 27.6

-

RF(kg) BW(kg)

10 8

11 9

12 10

21 16

30 25

37 30

60 52

90 75

130 110

176 150

333 320

340 280

550 520

765 -

1100 -

DN NPS

15 1/2

20 3/4

25 1

40 1-1/2

50 2

65 2-1/2

80 3

100 4

150 6

200 8

250 10

300 12

350 14

400 16

A-A1 (RF-BW)

165 6.5

190 7.5

216 8.5

241 9.5

292 11.5

330 13.0

356 14.0

432 17.0

559 22.0

660 26.0

787 31.0

838 33.0

889 35.0

991 39.0

A2(RTJ)

165 6.5

190 7.5

216 8.5

241 9.5

295 11.6

333 13.1

359 14.1

435 17.1

562 22.1

664 26.1

790 31.1

841 33.1

892 35.1

994 39.1

B

280 15.2

300 11.8

350 13.8

400 15.7

440 17.3

515 20.3

570 22.4

610 24.0

850 33.5

1077 42.4

1276 50.1

1490 58.8

1426 56.1

1431 56.3

C

180 7

180 7

200 8

200 8

250 10

250 10

300 12

350 14

450 18

500 20

600 24

680 27

-

-

RF(kg) BW(kg)

22 20

23 21

25 22

28 24

39 35

56 44

68 59

121 97

270 230

450 380

720 580

950 830

1750 -

2260 -

Bolted Bonnet

Class 600

AU S T R A L I A N P I P E L I N E VA LV E

Pressure Seal Bonnet

11

GLOBE VALVES

GLOBE VALVES SUMMARY

DIMENSIONS AND WEIGHT (mm and inch) Class 900 DN NPS

15 1/2

20 3/4

25 1

40 1-1/2

50 2

65 2-1/2

80 3

100 4

150 6

200 8

250 10

300 12

350 14

400 16

A-A1 (RF-BW)

216 8.5

229 9.0

254 10.0

305 12.0

368 14.5

419 16.5

381 15.0

457 17.99

610 24.0

737 29.0

838 33.0

965 38.0

1029 40.5

1130 44.5

A2(RTJ)

216 8.5

229 9.0

254 10.0

305 12.0

371 14.6

422 16.6

384 15.11

460 18.11

613 24.1

740 29.1

841 33.1

968 38.1

1038 40.9

1140 44.9

B

385 15.2

390 15.35

398 15.7

490 19.3

695 27.4

755 27.8

724 28.5

832 32.7

1065 42.0

1320 52.0

1540 60.6

1840 72.5

2135 84.1

2380 93.8

C

100 3.9

100 3.9

200 8.0

250 9.5

300 12.0

300 12.0

300 12.0

559 22.0

610 24.0

813 27.0

813 27.0

850 34.0

-

-

RF(kg) BW(kg)

25 22

27 24

31 28

44 38

95 73

140 120

102 90

177 150

480 320

1345 1225

1400 1325

2200 1900

2650 2130

3300 2860

Class 1500 DN NPS

15 1/2

20 3/4

25 1

40 1-1/2

50 2

65 2-1/2

80 3

100 4

150 6

200 8

250 10

300 12

A-A1 (RF-BW)

216 8.5

229 9.0

254 10.0

305 12.0

368 14.5

419 16.5

470 18.5

546 21.5

705 27.8

832 32.8

991 39.0

1130 44.48

A2(RTJ)

216 8.5

229 9.0

254 10.0

305 12.0

371 14.6

422 16.6

473 18.6

549 21.6

711 28.0

841 33.1

1000 39.4

1146 45.1

B

385 15.2

390 15.35

398 15.7

490 19.3

695 27.4

755 27.8

770 30.3

872 34.8

1092 43.0

11400 55.1

1600 63.0

1950 76.8

C

100 3.9

100 3.9

200 8.0

250 9.5

300 12.0

400 16.0

400 16.0

500 20.0

600 24.0

750 30.0

-

-

RF(kg) BW(kg)

25 22

27 24

31 28

44 38

95 73

130 110

170 140

255 220

590 440

1290 1190

1700 1480

2600 2300

DISC STYLES

PLUG

12

PARABOLIC

BALL

NEEDLE

PILOT

STOP CHECK

AU S T R A L I A N P I P E L I N E VA LV E

SOFT SEAT

BODY GUIDED

SWING CHECK VALVES

SWING CHECK VALVES ANSI CLASS 150 - 1500 MATERIAL OPTIONS & DIMENSION SUMMARY 13*

STANDARDS

10 9

8 7 6 5 4 3 11

2

12

1

Face to Face Dimensions

ASME B16.10

End Flange Dimensions

ASME B16.5

Buttwelding Ends

ASME B16.25

Shell Wall Thickness

API 594

Basic Design

ASME B16.34 / API 594

Test

API 598 / ISO 5808 / API 6D

TYPE OF CONNECTION RF and RTJ flange ends to ANSI B16.5 or API 605/MSS SP44 standard.

A1

A2

BW flange ends to ANSI B16.25 standard.

MATERIAL LIST No.

Part Name

Carbon Steel WCB

APV Suffix Code 1

Body

Alloy Steel

Stainless Steel

WCC

LCB

LCC

C5

WC6

WC9

CF8

CF8M

CF3

1

2B

2

5

6

9

8

8M

0

3M

A352 LCB

A352 LCC

A217 WC6 A182 F304/316 A217 WC6

A217 WC9 A182 F304/316 A217 WC9

A351 CF8

A351 CF8M

A351 CF3

A351 CF3M

A182 F304

A182 F316

A182 F304L A182 F316L

A351 CF8

A351 CF8M

A351 CF3

A182 F304

A182 F316

A182 F304L A182 F316L

A216 WCB A216 WCC

CF3M

2

Seat Ring

A350 LF2

A350 LF2

3

Disc

A216 WCB A216 WCC

A352 LCB

A352 LCC

A217 C5 A182 F304/316 A217 C5

4

Disc Nut

A182 F6

A182 F6

A182 F6

A182 F6­­­

A182 F304

A182 F304

A182 F304

5

Hinge

A216 WCB A216 WCC

A352 LCB

A352 LCC

A217 C5

A217 WC6

A217 WC9

A351 CF8

A351 CF8M

A351 CF3

6

Hinge Pin

A182 F6

A182 F6

A182 F6

A182 F304

A182 F304

A182 F304

A182 F304

A182 F316

A182 F304L A182 F316L

7

Gasket

Solid metal serrated gasket

8

Cover

A216 WCB A216 WCC

9

Cover Bolt

10

Cover Nut

11

Washer

12

Seat/Disc Facing

13

Eye Bolt*

A105

A105

A182 F6

Stainless Steel & Graphite spiral wound A352 LCB

A352 LCC A193 B7

A217 C5 A320 L7

A194 2H

Non-metallic gasket A217 WC6

A217 WC9

A193 B16

A193 B8

A194 4

A194 7

A351 CF3M A351 CF3M

Stainless Steel or CAD Plated Soft Iron Ring Gasket A351 CF8

A351 CF8M

A351 CF3

A351 CF3M

A193 B8M

A194 8

Carbon Steel or Alloy Steel or Stainless Steel 13Cr

or

16Cr-8Ni

or

HF(Co-CrA) ST#6

A193 B7

or

316

or

304

A320 L7

The material is according to ASTM standard. * Eye bolt supplied in larger sizes & higher classes.

API 6FD & ISO 10497 Firesafe Certified (API 6D Version)

AU S T R A L I A N P I P E L I N E VA LV E

13

SWING CHECK VALVES

SWING CHECK VALVES ANSI CLASS 150 - 1500 DIMENSIONS AND WEIGHT (mm and inch) Class 150 DN NPS A-A1 (RF-BW) A2(RTJ) B RF(kg) BW(kg)

15 1/2 108 4.3 119 4.7 90 3.5 7 6.0

20 3/4 117 4.6 128 5.0 100 3.9 7 6.0

25 1 127 5.0 140 5.5 120 4.7 8 7.0

40 1-1/2 165 6.5 178 7.0 130 5.1 11 8.5

50 2 203 8.0 216 8.5 170 6.8 15 12.0

65 2-1/2 216 8.5 229 9.0 180 7.1 23 16.0

80 3 241 9.5 254 10.0 185 7.4 33 24.0

100 4 292 11.5 305 12.0 215 8.5 44 34.0

125 5 330 13.0 343 13.5 240 9.5 69 57.0

15 1/2 152 6.0 165 6.5 90 3.5 8 7

20 3/4 178 7 190 7.5 90 3.5 9 8

25 1 203 8.0 216 8.5 120 4.7 10 8

40 1-1/2 229 9.0 241 9.5 160 6.3 12 10

50 2 267 10.5 283 11.1 170 6.8 21 15

65 2-1/2 292 11.5 308 12.1 185 7.4 24 17

80 3 318 12.5 333 13.1 215 8.5 39 30

100 4 356 14.0 371 14.6 235 9.3 60 50

125 5 400 15.8 416 16.4 270 10.6 80 60

150 6 354 14.0 368 14.5 260 10.3 78 63.0

200 8 495 19.5 508 20.0 300 11.9 137 122.0

250 10 622 24.5 635 25.0 350 13.9 207 175.0

300 12 699 27.5 711 28.0 400 15.8 279 229.0

350 14 787 31.0 800 31.5 450 17.8 428 368.0

400 16 864 34.0 876 34.5 480 19.0 555 483.0

450 18 978 38.5 991 35.0 540 21.3 775 685.0

500 600 700 750 20 24 28 30 978 1295 1448 1524 38.5 51.0 57.0 60.0 991 1308 1461 1537 39.0 51.5 57.5 60.5 600 680 710 790 25.6 26.8 28.0 31.1 835 1300 1450 1620 720.0 1150.0 1300.0 1450.0

150 6 445 17.5 460 18.1 300 11.9 90 68

200 8 533 21.0 549 21.6 340 13.4 175 145

250 10 622 24.5 638 25.1 350 13.9 210 180

300 12 711 28.0 727 28.6 420 16.6 286 260

350 14 838 33.0 854 33.6 480 18.9 700 490

400 16 864 34.0 879 34.6 520 20.5 774 640

450 18 978 38.5 994 39.1 600 23.6 1000 850

500 20 1016 40.0 1035 40.8 670 26.4 1273 1100

450 18 1092 43.0 4095 43.1 730 28.8 1600 1350

500 20 1194 47.0 1200 47.3 8000 31.5 2420 2050

600 24 1397 55.0 1407 55.4 900 35.5 3150 2720

500 20 1321 52.0 1334 52.5 850 33.5 3500 3100

Class 300 DN NPS A-A1 (RF-BW) A2(RTJ) B RF(kg) BW(kg)

600 24 1346 53.9 1368 53.9 750 29.6 1650 1400

700 28 1499 59.0 1524 60.0 780 30.7 1725 1570

Class 600 DN NPS A-A1 (RF-BW) A2(RTJ) B RF(kg) BW(kg)

50 2 292 11.5 295 11.6 175 6.9 28 20

65 2-1/2 330 13.0 333 13.1 200 7.9 38 30

80 3 356 14.0 359 14.1 230 9.1 55 42

100 4 432 17.0 435 17.1 295 11.6 87 65

150 6 559 22.0 562 22.1 360 14.3 207 145

200 8 660 26.0 664 26.1 400 15.8 354 280

250 10 787 31.0 791 31.1 460 18.1 580 490

300 12 838 33.0 841 33.1 520 20.5 790 670

350 14 889 35.0 892 35.1 560 22.1 892 752

400 16 991 39.0 994 39.1 650 25.6 1200 1020

Class 900 DN NPS A-A1 (RF-BW) A2(RTJ) B RF(kg) BW(kg)

50 2 368 14.5 371 14.6 250 9.9 69 60

65 2-1/2 419 16.5 422 16.6 270 10.6 72 65

80 3 381 15.0 381 15.1 280 11.0 85 70

100 4 457 18.0 460 18.1 310 12.3 145 120

150 6 610 24.0 613 24.1 380 15.0 310 265

50 2 368 14.5 371 14.6 250 9.9 69 60

65 2-1/2 419 16.5 422 16.6 270 10.6 93 78

80 3 470 18.5 473 18.6 300 11.9 120 90

100 4 546 21.5 549 21.6 330 13.0 235 185

150 6 705 27.8 711 28.0 450 17.8 540 450

200 8 737 29.0 740 29.1 430 17.0 500 382

250 10 838 33.0 841 33.1 480 18.9 772 600

300 12 965 68.0 968 33.1 560 22.0 1080 860

350 14 1029 40.5 1038 40.9 630 24.9 1380 1140

400 16 1130 44.5 1140 44.9 700 27.6 1810 1510

450 18 1219 48.0 4232 48.5 750 29.6 2400 2050

250 10 991 39.0 1000 39.4 560 22.1 1275 1065

300 12 1130 44.5 1146 45.1 711 28.0 2390 2070

350 14 1257 49.5 1276 50.2 1006 39.6 -

400 16 1384 55.5 1407 55.4 1481 58.3 -

450 500 18 20 1537 1664 60.5 65.51 1559 1686 61.4 66.38 2024 2600 79.7 102.36 -

Pressure Seal Bonnet

Class 1500 DN NPS A-A1 (RF-BW) A2(RTJ) B RF(kg) BW(kg)

14

200 8 832 32.8 841 39.4 500 19.8 949 785

AU S T R A L I A N P I P E L I N E VA LV E

Bolted Bonnet

750 30 1595 62.8 1620 63.8 810 31.9 1819 1700

AUSTRALIAN PIPELINE VALVE BRAND RANGE - CATALOGUES

COMPLETE PRODUCT LINE “Australian Pipeline Valve

Product Brochure

Ball Valves Floating & Trunnion Mounted

Ball Valves Floating Small Bore

Ball Valves Special Service

Gate, Globe & Check Valves - Cast Steel

Gate, Globe & Check Valves - Forged Steel

Plug Valves Lubricated, Sleeved & Lined

Oilfield Products Valves & Wellheads

produces isolation, control and flow reversal protection products for severe and critical service media in utility, steam, pipelines, oil & gas and process industries.

APV valves and pipeline products form the most

APV FAMILY OF BRANDS RANGE - CATALOGUES

competitive portfolio in the market.”

Diamond Gear Gearboxes

Flowturn Ball Valves Multiway & Deadman

Flowturn Gate, Globe & Check Valves

Flowturn Instrument Valves

Flowturn Strainers & Sight Glasses

Steamco Steam Valves

Supercheck Wafer Check Valves

Superseal Butterfly Valves

Superseal Industrial Ball Valves

Torqturn Actuators

TwinLok Tube & Pipe Fittings

Uniflo Check Valves

Contact us for your local stockist/distributor View our catalogues at www.australianpipelinevalve.com.au

www.australianpipelinevalve.com.au LOCAL DISTRIBUTOR

QUALITY ASSURANCE AND CERTIFICATION We are continually improving all facets of quality assurance. Full metallurgical and test certificates are always supplied for all pressure retaining parts, we also provide it on all major trim components.

We have endeavoured to provide a broad outline of our range and capabilities. Because we are continually developing new products for our customers this catalogue will, to some extent be incomplete. This catalogue is a general overview only, individual drawings and data sheets can be furnished on request.

If you have any requirement in the field of valves, please contact us for a prompt response. Continuous development of Australian Pipeline Valve products may necessitate changes in the design or manufacturing processes. Australian Pipeline Valve reserves the right to effect any such changes without prior notice.

© Australian Pipeline Valve 1990 - 2025 Edition