EASY DEBURRING with BARRIQUAN.
FOR MACHINING CENTERS
Barriquan’s self-compensating tool holders solve many deburring challenges.
Remaining Burr
Cutting Too Deep
Complicated Workpiece Shape
What is Float Deburring? It is a machining method that prevents burrs from being left behind and workpieces from being over-shaved by aligning the tool to the shape of the workpiece at a constant pressure.
Video
Without Float Deburring
With Float Deburring
Constant machining pressure
Machining Load Comparison Max.
130N
(Approx. 13kg)
Cutters
Suitable tools for Float Deburring
Max.
30N
(Approx. 3kg)
Brushes
90°
90° tip angle is recommended
Extends as much as it wears out.
More blades are better
Brush should have cutting power at the tip of the bristles
Q ui ck D i s co nne c t
Detachable Floater
Exchangeable Spring Pull the Trigger
Attachable/Detachable Floater
Remove rear cap to exchange spring.
A medium tension spring is installed on standard models. Light and heavy springs are included.
Align the marks
Manual Spring Change (No Tools Required)
Quick Tool Change The floater is easily changed in 3 seconds just by pulling the trigger.
Springs can be replaced manually, just by detaching the rear cap, no tools are required. You can choose the right spring for your specific needs.
No tools are required for daily maintenance. Daily maintenance will extend the lifetime of Barriquan.
Relationship between Feed Speed and Chamfer width by Spring 1
Video
Chamfered Width C
[mm]
0.9
C
0.8
C
0.7 0.6
Strong 強
0.5 0.4
Mid-Range
中
0.3
Weak 弱
0.2 0.1 0
3,000
4,000
5,000
6,000
Feed [mm/min]
Machine 弱スプリング 中スプリング = Sugino SC-V30a 強スプリング Material = Steel Rotation Speed = 8,000min-1
S p e ci f i ca t io ns Model
BRQ-TX01
Series
BARRIQUAN
Shank size
φ20 X 40.5L
Length without shank
φ29
Weight
270g
Collet
High feed rate shortens CT and provides stable finishing.
72mm
Body diameter
Allowable rotation speed
Corresponds to allowable rotation speed of 12,000min-1
Deburring examples at varied spindle speeds.
12,000min
-1
φ6
(standard)
φ3
(option)
φ6.35
Spindle speed
Max.Chamfered Width 0.49mm Min. Chamfered Width 0.24mm Deburring width is not stable at entrance area.
= 1/4 inch(option)
φ3.175 = 1/8 inch(option)
Spindle speed
(installed inside body when you receive)
Weak(attached with BRQ-TX01) Strong (attached with BRQ-TX01)
12,000 min-1
Entrance area
Medium
Spring
5,000 min-1
Max.Chamfered Width 0.37mm Min. Chamfered Width 0.37mm Deburring width is stable at higher spindle speeds, even from the start.
Feed = 6,000 mm/min Material = Steel
Sugino Corp.
www.suginocorp.com
U.S.A.
sales@suginocorp.com
Chicago
TEL +1-630-250-8585 / 888-SUGINO1 FAX +1-630-250-8665
Detroit
■ Specifications in this catalog are subject to change without prior notice for further improvement. ■ When exporting this product overseas, please follow the export control procedures based on Japan's Foreign Exchange and Foreign Trade Law. ■ , , and BARRIQUAN are registered trademarks or service marks of Sugino Machine Limited in Japan or foreign countries. ■ The content of this catalog is as of April 2022. ■ Any unauthorized use, copying or reprinting of the contents or part thereof in this catalog is prohibited.
TEL +1-248-956-8320
BRQ-TX01 En/2204 01 PR