Positioning Tables and Slides
Latest version of the catalogs
You can always find the latest version of our catalogs in the Download area of our website.
Disclaimer
This publication has been compiled with great care and all information has been checked for accuracy. However, we can assume no liability for incorrect or incomplete information. We reserve the right to make changes to the information and technical data as a result of enhancements to our products. Reprinting or reproducing, even in part, is not permitted without our written consent.
1.1 Positioning
Tables
NH2-40/40-AL, NH2-65/65-AL, NH2-110/110-AL
Single axis stages with SCHNEEBERGER linear bearings Type R2-RF. Manual positioning with micrometer, reading accuracy 0.01mm. Table parts are lightly loaded onto the micrometer screw by a tension spring. Design is available with or without micrometer, with or without spring. Micrometer fastening on the side or front of the stage. Tables of the same size can easily be assembled into 2 axis configuration. Standard strokes 13/13 and 25/(40)mm. Special hole patterns or strokes on request. All designs with a clamping system on the side of the stage. Table parts in aluminium anodised. Linear bearings in corrosion resistant steel. Tables can be integrated in any plane (micrometer below stage in vertical orientation!).
1.2 Options
• OF without tension spring
• MF with tension spring
• ML Micrometer front
• MS Micrometer side
Clamping standard right. Can be easily changed from right to the left side by the customer. (Except version MS)
Positioning Tables NH2 Technical data
Type NE AL slides are designed as closed model, which means that they can be sealed on all sides with small spacing between upper and lower sections. Prevent the ingress of dirt.
All sizes are equipped with linear bearing type R bearings. There are standardized attaching thread holes in the upper and lower section. Table parts in aluminium. Linear bearings in corrosion resistant steel (only NE 1 and NE 2). Tables can be integrated in any position.
NE 1, 2 , 3 - AL
2.1 Slides NE 1, 2 , 3 - AL
2.2 Dimensions
2.3 Dimension Tables
3.1 Positioning Tables NFM 7 / 9 / 12
Single axis manual driven stages with SCHNEEBERGER MINIRAIL – guideways. Manual positioning by a precision lead-screw, with anti- backlash nut and raduated drum, that can be set to zero position. Reading accuracy 0.01mm, strokes from 25mm to 150mm.
NFM is a modular system with options for table base and top plate lengths, to give strokes between 25 and 150mm. Table parts made in aluminium anodised, MINIRAIL linear guideways and lead screw in corrosion resistant steel. Stage can be integrated in any plane.
Special sizes and/or special attaching holes available on request. Optional clamping device on the side or directly on the lead screw (L dimension increased by 7mm). The clamping device can be mounted on either side of the stage (Size 7 without hand crank).
3.2 Options
• KR clamping right
• KL clamping left
• KS clamping on lead screw
Assembly to X-Y 2-axis stage without intermediate plate or to X-Y-Z 3-axis table with bracket are possible on request
clamping left/right
clamping on lead screw
Dimensions
3.4 Dimension Tables
