How can you install portable air conditioners?
Among the several cooling solutions available in the market, portable air conditioners are one of the best choices. They are efficient and cost-saving units, making them a preferable choice for regulating the temperature of the buildings. The systems ensure better air quality and come in handy for controlling the humidity indoors. They can help make the space less damp, which, in turn, can reduce the risk of stroke. With portable air conditioners, there is an additional advantage of mobility as these units can be moved between rooms without hassle. For those interested in investing in these systems, here is an installation guide. Have a look!
How do portable ACs work?
The portable air conditioning units control the temperatures by pulling out hot air from the space and sending it outside. The system features a motor for cooling the air circulating through the room. During the process, excess humidity is removed and pushed outside the window through the hose. The AC removes heat from the room and sends it outside. Here is how this works: The portable air conditioning unit uses refrigerant to support heat transfer. It compresses the refrigerant and changes its state from liquid to gas.
The fan sucks hot and humid air from the room. Then, it forces it to move over the condenser coils, where the heat and humidity get extracted. The moisture is removed to the point until it becomes vapour.
Then, the hot air is transferred to the refrigerant running through the coils. During the process, the refrigerant gets heated and takes the form of a highpressure gas that travels through the AC. The moisture absorbed from the air is collected and sent outside. Then, the refrigerant is compressed, and heat transfer is facilitated. The heat from the compressor is vented out through an exhaust hose.
How to install a portable air conditioner?
Pick an area: The first step of the installation process involves searching for an appropriate area. Your tower AC must be installed several feet above the floor. It will promote air circulation, ensuring efficient performance.
When installing your AC, you must look at a spot nearby the window. It will allow easy ventilation of warm air. But if your AC has a hose that drains continuously, you might want to set it up near the sink. You can also use a bucket to collect wastewater.
Window adapter kit:
Using a window adapter kit will allow you to create a seamless seal in the window. A perfect fit will eliminate the requirement for additional materials. But, if the window is too large, you will need plexiglass or plywood to fill the excess space.
In another case, if the window is too small, adjustments to the adapter kit will be required. After you have made the arrangements, install the AC.
Attach ventilation and hose:
Connect one end of the window adapter kit to the hose and the other to the air conditioner. Make sure both ends fit well. If they don’t, use duct tape to seal the gaps.
If your tower AC features a drainage hole, attach it to the system. Secure the hose to the water drain. Next, tape it on the wall so it won’t get loose.
This is how you can install a portable air conditioner.
