VERTICAL BRUSH SANDING MACHINE
Designed for processing solid wood in various shapes and sheet materials, most commonly MDF. It is equipped with two motors, one for the sanding belt roller and the other for oscillations, significantly improving sanding quality. The work table has two adjustable stops based on the required pressure for processing.
EASY BELT CHANGE
Easy replacement of the sanding belt in two steps: removing the rubber limiter and pulling out the worn sanding belt or brush.
The machine is equipped with a speed controller, allowing you to adjust the rotation of the sanding belts according to the material you are processing.
construction that eliminates vibrations and ensures stability during operation.
support roller for larger workpieces, adjustable as needed.
Roller diameter
Roller height
First main motor power
Power of the first motor for oscillations
Total power
Number of sanding strips
Number of short brushes
Number of long brushes
Machine dimensions
Packing dimensions
A F100 dust extraction port is installed for connecting to a dust extractor (aspirator) for removing sawdust.
With the brush machine, you gain numerous processing options such as sanding raw MDF, sanding MDF with a base coat (primer), sanding panels of irregular shapes, 2D and 3D shapes and sanding solid wood products. CAPABILITIES