Epson Printer Printing With Lines Missing The lines missing issue can occur because of several reasons. Clogs in the ink nozzles, misaligned printheads, print settings are set to low, and inappropriate paper thickness could be the causes for the error. The solutions are given on this site. Solutions To Fix The Epson Printer Printing With Lines Missing
Link the printer and the computer and turn On both the devices. Select the Windows Start icon and choose Control Panel. Double-click on the Printers & Faxes folder. Right-click on the name of your Epson printer. Choose the Services tab. Click the Service this Device option to open the Printer Toolbox. Select Clean the Print Cartridge from the Device Services tab. Comply with the instructions that display on the screen and print a test page and check if the issue is rectified.
Steps To Troubleshoot Epson Printer Printing With Lines Missing
Clean contacts: Open the ink cartridge access door on your Epson printer and wait until the carriage remains silent. Power Off your printer and disconnect the power cord from its rear. Remove the ink cartridge from its slot and place it on a tissue paper with the nozzle plate facing upwards. Wet the lint-free cloth using bottled or distilled water and clean the copper-colored contacts. Wipe the other ink cartridges and the electrical contacts that are present in the carriage area. Allow the electrical contacts and the cartridge to dry for at least ten minutes. Reinsert the ink cartridges and lower the cartridge access door. Reconnect the cord at the rear of your Epson printer. Turn On your device and perform a test print to verify if the error has been resolved. Discard the black cartridge for two hours: Open the access door and remove the black cartridge from the Epson printer. Keep the cartridge on the paper with the nozzles on it facing up. Rest the black cartridge for about two hours. Reinstall the cartridge into its correct slot. Print a test page and check if any defects are present. If there are any problems with your black cartridge, replace it with a one that is compatible and genuine with your Epson printer. Run the Print cartridge Utility software: Ascertain to link your Epson printer to the computer. Select the Start button on the desktop and click the Control Panel option. Double-click on the Print and Fax icon. Right-click on the folder name of your Epson printer and select the Preferences option. Choose the Services menu and click Service this Device. The Printer Toolbox window appears on the screen. Choose Clean the Print Cartridge from the Device Services menu. Comply with the on-screen prompts and print a test page.