Analytical Reporter September/ October 2025

Hanna Instruments would like to extend their gratitude to all their esteemed and loyal *CUSTOMERS* for their ongoing support, and for visiting their stand, during the 2025 Analytica Lab Africa Exhibition at Gallagher Convention Centre in JHB.

The new standard for sample digestion

ColdBlock is the only sample digestion technology that uses focused short-wave infrared heating and a cooling zone to dissolve solid sample matter into solution for elemental analysis.

SPEED

Average cycle time is significantly faster than microwave or hot plate.

SAFETY

No pressurization. Safer handling of samples. No need for perchloric acid.

SIMPLICITY

Fits into existing lab space. Minimal maintenance required.

SAVINGS

Shorter cycle time and increased throughput leads to increased lab productivity.

Contact: Steve Varty steve@rapid-sci.co.za +27 83 266 9889

coldblock.ca

Adam Equipment welcomes Colin Maher as its new Chief Executive Officer/Group Managing Director

For over 40 years, Air & Vacuum Technologies has been a trusted partner in supplying highperformance laboratory and industrial equipment across Africa

Fast and robust ammonium determination according to current ISO, EPA, and ASTM standards using direct measurement

ENVIRONMENTAL EQUIPMENT:

The newly launched KBF-S ECO constant climate chamber delivers the high-quality standard of a Binder chamber FORENSIC

TESTING:

LC-MS solutions deliver data you can trust in forensic labs

LIFE SCIENCE:

SOFTWARE & LAB AUTOMATION:

Transform your lab work with the Andrew+ pipetting robot

Benefits of a COD reactor at 170°C for 15 minutes

YSI has earned a reputation as the bio-analytical Gold Standard, due to their highly accurate biosensor technology

HI7660-28 Low Range Turbidity Probe for HI510 and HI520 Process Controllers

Continuous Monitoring of Turbidity

The HI7660-28 are nephelometric turbidity probes designed for use with Hanna Instruments®

HI510 or HI520 Universal Process Controller. The system is designed to measure low turbidity values according to the nephelometric method (ISO 7027 – EN 27027).

Factory calibrated turbidity probe

An integral temperature sensor measures water temperature and adjusts the probe signal for temperature-related changes over the range of 0 to 50 °C (32 to 122 °F).

• Factory calibrated turbidity probe

• Adheres to ISO 7027 – EN 27027 standards

• ISO 7027 sensors use a near infrared lightemitting diode (LED) to eliminate color interference

We also operate in Botswana, Eswatini, Lesotho, Mozambique, Namibia and Zimbabwe. Contact apaka@hanna.co.za Cell: +27 (0) 72-910-5749

From expo to expo –brick by brick

Dear Reader

This issue of Analytical Reporter brings you a diverse collection of articles exploring the latest breakthroughs in forensic testing, pH instrumentation, and water testing & purification. We're also particularly excited to feature the round-up news of the analytica Lab Africa show, which was by all accounts a resounding success!

Moreover, the excitement doesn’t stop with the lab expo. My sister, who lives in Nottingham, UK, recently told me about an exhibition she had been to. She is a graphic illustrator and writer, not a scientist, yet she was captivated by an innovative LEGO installation which brings the world of quantum science to the layman.

Researchers from the University of Nottingham’s Gravity Laboratory, alongside student LEGO enthusiasts, have developed unique LEGO-based interferometer kits to make quantum science more accessible and engaging.

The kits are designed for secondary and older pupils, embracing a hands-on approach with LEGO bricks that are suitable for classroom use.

The fully functional LEGO interferometer sets are designed to replicate professional optical equipment, bridging the gap between abstract concepts of cutting-edge technology and tangible demonstrations that captivate live audiences. With easy-to-follow instructions, these kits serve as valuable teaching aids, inspiring the next generation of scientists. Featuring lasers, mirrors and beamsplitters, the kits demonstrate the principles of interferometry. When two laser beams are combined, they create a delicate, alternating pattern of dark and bright stripes, known as an interference pattern.

This pattern is highly sensitive to even the tiniest changes in the lengths of the beams, otherwise imperceivable to our senses. Interferometry has a range of practical applications that touch our daily lives. For example, it enables eye doctors to capture detailed images of the retina, helping in precise diagnoses and treatment of eye conditions. It's also used to improve navigation systems by providing us with the most accurate rotation sensors.

In science, interferometry plays a crucial role in detecting gravitational waves, which are ripples in spacetime caused by massive cosmic events, allowing astronomers to gain new insights into the Universe.

This project, titled Photon Bricks and led by Dr Patrik Svancara, a Research Fellow from the School of Mathematical Sciences, is funded under the UKRI’s Quantum Technologies for Fundamental Physics Programme, which demonstrates how quantum technologies can explore key physics questions, such as dark matter, gravity, and the quantum properties of elementary particles.

Says Dr Patrik Svancara: “Photon Bricks have completely transformed the way I see my research.

Developing this project made me realise just how incredibly similar my work as a quantum scientist is to the hands-on creativity of building with LEGO.

It’s an absolute thrill to show the public that cutting-edge research isn’t just complex equations.

It’s so much more about curiosity, problem-solving, and gradually bringing ideas to life, brick by brick!”

The significance of quantum science has been recognised this year, with the United Nations declaring 2025 as the International Year of Quantum Science and Technology to raise public awareness of its importance and impact on various aspects of life. Quantum mechanics led to the development of things like lasers, light-emitting diodes, transistors, medical imaging, electron microscopes, and a host of other modern devices.

Your cell phone would not exist without the science of quantum mechanics!

Until next time,

https://www.nottingham.ac.uk/news/photon-bricks-a-legoset-for-playful-quantum-explorations

Image credit: Gallo Images/ Just_Super

HIGHLIGHTS

ADAM EQUIPMENT WELCOMES COLIN MAHER AS ITS NEW CHIEF EXECUTIVE OFFICER/GROUP MANAGING DIRECTOR

Adam Equipment Co Ltd, a leading global designer and manufacturer of high-quality, precision scales, balances and accessories, has announced the appointment of Colin Maher as its new Chief Executive Officer/ Group Managing Director.

"I am delighted to be joining Adam Equipment at such a pivotal moment in the company’s long and successful history,” Maher says. “With its strong global team ethos, I look forward to helping take the company to the next level through product innovation, an expanded product range, and a continued focus on customer excellence."

Maher joined Adam on 28 July, bringing with him a wealth of experience in the weighing industry.

Most recently, Maher was Managing Director for the UK and Ireland for transportation manufacturer Schmitz Cargobull, following previous roles in industrial weighing technology with Minebea Intec and Avery Weigh-Tronix.

His career began with an apprenticeship and Higher National Certificate in Electronic

Engineering. Starting as a service technician at Avery Weigh-Tronix, his roles in the weighing industry have included Systems Support Engineer, Product Manager for Inspection, and Country Manager before becoming Minebea Intec’s Director for North America, the UK and Ireland.

Looking ahead, Maher says, “I’m really excited for this next chapter in my career. The experience and knowledge I’ve gained over the 35 years in the weighing industry has set me up well to help lead Adam Equipment forward, and I can’t wait to get started with the team.”

As CEO, Maher will oversee Adam Equipment’s worldwide operations, which include its Milton Keynes headquarters in the UK, branches in the United States, Germany, South Africa, Australia and China, alongside its manufacturing facility in China.

Maher succeeds Richard Storey, who served as Adam’s CEO / Managing Director from May 2019 - when the company was acquired by Indutrade - until his recent retirement.

Earlier this year, Storey announced his intention to retire from the business to Indutrade's board of directors. Looking back on his tenure leading Adam, he reflects, "It has been a privilege to work with a great group of colleagues, customers and suppliers, but also my father, Alan, who set up the company, and my brothers, as we grew the company to what it is today.

“I wish Colin and the management team all the very best for the future as they continue the journey forward,” Storey says. “Having worked for Adam for over 32 years, I felt the time was right for the business and me personally to step away - but not before we had built a platform for the future, and I’m looking forward to seeing the exciting next steps that the company will take.”

BIOREBA AG: YOUR PARTNER IN AGRO-DIAGNOSTICS

From farmers in the field to scientists in national labs, accurate diagnostics can mean the difference between a secure harvest and devastating loss. That’s why many farmers and laboratory specialists turn to BIOREBA AG, a biotech company that provides diagnostic tests for the detection of plant pathogens. These pathogenic organisms cause infectious plant diseases that result in tens of dollars in crop losses each year. Early detection of infected plants and seeds establishes good premises for healthy, thriving crops and high crop yields.

Founded in 1982 through a partnership with Switzerland’s Agroscope, Bioreba pioneered plant-virus ELISA testing. Today, their extensive range of ELISA, qPCR, and rapid AgriStrip tests are used worldwide to

detect plant pathogens quickly and reliably. BIOREBA AG’s Enzyme-Linked Immunosorbent Assay (ELISA) is the assay format that is very popular in terms of efficiency, reproducibility, performance and validation in the plant pathogen diagnostic.

Their qPCR products are validated for fast and reliable protocols that have transformed hours of labour. Lastly, the rapid one-step assay AgriStrip is based on lateral flow immunochromatography. AgriStrip test has been developed to confirm the presence of a plant pathogen in samples with suspicious symptoms. It is available in two sets and one kit format. Therefore, whether you’re a seed producer, a seed grower or a diagnostic lab technician, Bioreba delivers precision you can trust.

This brand is ISO-accredited, validated, and its operation is supported by decades of technical expertise that sets BIOREBA AG apart. For those who safeguard plant health, BIOREBA AG isn’t just a brand, it’s a dependable partner, helping ensure stronger

crops, safer food, and a more resilient agricultural future. For more details on BIOREBA AG, contact inqaba biotec, BIOREBA AG’s certified service provider.

INQABA BIOTECHNICAL

SOUTH AFRICA-HQ Tel: +27 12 343 5829

katleho.radebe@inqababiotec.co.za www.inqababiotec.co.za

(PTY) LTD

INTRODUCING LABOTEC 65-YEAR LIMITED EDITIONS

In celebration of Labotec’s remarkable 65-year journey providing exceptional products and services to the scientific community in Southern Africa, we're thrilled to introduce two brand-new limited-edition releases!

Presenting the Limited Edition Precision Balances and the highly popular IncoTherm & EcoTherm Digital Ovens and Incubators with a new look. These trusted and widely used products are essential in labs delivering

unmatched reliability and precision for a variety of applications. Here’s to 65 years of excellence - and many more to come!

Limited Edition Labotec Precision Balances

The Labotec Limited Edition Precision Balances are toploader balances designed to deliver a reliable, repeatable, and accurate weighing experience for incubation, drying, aging, curing, and general experimental processes.

Limited Edition Labotec Benchtop Digital Ovens & Incubators

As pioneers in the local manufacture of scientific equipment, Labotec has consistently introduced durable and innovative products for laboratories. The IncoTherm Incubators and EcoTherm Ovens have become bestsellers and are among the most popular items in this series. These models are based on proven technology, offering an excellent balance between performance and cost.

CODE IDFREEGENIE

WITH HORIZONTAL TUBE ADAPTER WHEN YOU ORDER ANY FIVE FULLSIZE QUALIFYING KITS FROM OUR ENVIRONMENTAL AND MICROBIAL NUCLEIC ACID EXTRACTION PRODUCT LINES.

Quick-DNA Plant/Seed Miniprep Kit | D6020

Quick-DNA Fungal/Bacterial Microprep Kit | D6007

Quick-DNA Plant/Seed Miniprep Kit | D6020

Quick-DNA Fungal/Bacterial Miniprep Kit | D6005

ZymoBIOMICS RNA Miniprep Kit | R2001

ZymoBIOMICS 96 DNA Kit with Lysis Tubes | D4309

ZymoBIOMICS DNA/RNA Miniprep Kit | R2002

Quick-DNA Tissue/Insect Miniprep Kit | D6016

Quick-RNA Fungal/Bacterial Miniprep Kit | R2014

Quick-RNA Plant Miniprep Kit | R2024

Quick-DNA/RNA Water Kit | R2044

’ sGenomics Company

Quick-DNA Fecal/Soil Microbe Microprep Kit | D6012

Quick-DNA Fecal/Soil Microbe Miniprep Kit | D6010

ZymoBIOMICS DNA Miniprep Kit with Lysis Tubes | D4300

ZymoBIOMICS 96 MagBead DNA Kit with Lysis Tubes | D4308

ZymoBIOMICS DNA Microprep Kit with Lysis Tubes | D4301

Quick-DNA Tissue/Insect Microprep Kit | D6015

Quick-RNA Fecal/Soil Microbe Microprep | R2040

Quick-RNA Fungal/Bacterial Microprep Kit | R2010

Quick-RNA Tissue/Insect Microprep Kit | R2030

Quick-DNA Fecal/Soil Microbe 96 Magbead Kit with Lysis Tubes | D6012-FM

ZymoBIOMICS 96 MagBead DNA Kit – Dx with Lysis Tubes | D4308-E

Eligibility Criteria:

Order must include ANY five qualifying kits (see eligible product list above). Kits may be mixed and matched—they do not need to be the same. All five kits must be purchased by a single customer, on a single purchase order (PO).

Limit one free instrument per customer. Exceptions may be considered—please contact us if you represent a facility or project that could benefit from receiving more than one unit. Offer valid through 30 June 2026 or while supplies last.

HIGHLIGHTS

BIGGEST-EVER ANALYTICA LAB AFRICA DRAWS RECORD CROWDS, NEW

• 7 768 visitors from 20+ countries attended analytica Lab Africa co-located with IFAT Africa

• 138 exhibitors from 12 countries at analytica Lab Africa

Event reinforces global analytica trade show prominence

• Sustainability, digital transformation & excellence in focus at Lab Forum

Thousands of thought leaders and industry stakeholders congregated at the Gallagher Convention Centre in Midrand, Johannesburg from 8 - 10 July 2025, for the most successful edition of analytica Lab Africa yet.

Organised by Messe Muenchen India and Messe München GmbH, analytica Lab Africa is South Africa’s only trade fair for laboratory technology, analysis, biotechnology and diagnostics.

Over the three days of the trade show, 138 international and local exhibitors showcased innovations across the gamut of laboratory technology, analysis and biotechnology solutions, while the analytica Lab Africa Laboratory Forum hosted panel discussions, presentations and demonstrations on key issues such as digital transformation, ethics, quality assurance, the regulatory environment, and sustainable practices. Over 50% of exhibitors participated for the first time in 2025, which is indicative of the powerful opportunities that the exhibition presents to support industry growth and to connect business decision makers.

analytica Lab Africa 2025, co-located

with IFAT Africa, secured its highest-ever percentage of visitors this year. The co-located events attracted 7 768 visitors, with delegates flying to South Africa from across the continent and around the world to share knowledge and discuss key issues in the sector. These events optimise the synergies across the laboratories, science and innovation sectors and the water, sewage and waste treatment sectors.

World-class value proposition

Bhupinder Singh, President - IMEA Messe Muenchen, and CEO Messe Muenchen India, says: “What impressed me most about analytica Lab Africa 2025 was the clarity of purpose. Companies came not just to exhibit, but to engage: with solutions, with partners, and with the African market, in a meaningful way. You could see the shift from showcasing products to solving problems. That’s a sign of an industry moving forward.”

Susanne Grödl, Exhibition Directoranalytica worldwide shows at Messe Muenchen, reports that the 2025 trade show was the third edition of the biennial analytica Lab Africa. “We started in 2019, when the event was first brought to South Africa. Since then, it has grown significantly to become a real success story.”

She attributed its success to worldclass thought leadership content, a vast exhibition area, and the unique opportunity it presents for industry networking.

“We had 138 exhibitors, and we were very proud to have had a huge German

EXHIBITORS

delegation with a pavilion and 13 exhibitors, as well pavilions from China and the UK pavilion, organised by Gambica, the specialist association for UK companies shaping the future of industrial and laboratory technologies.”

She noted that analytica is staged around the world and has been the world's leading trade fair for the innovative laboratory technology and pioneering biotechnology for five decades.

Speaking at the official opening, Steve B Sidney, Executive Director of the National Laboratory Association (NLA), said: “The longevity and success of analytica Lab Africa is an indication of how much it is needed. This kind of event offers a unique

opportunity for parties to meet, network, and make the right connections.”

CPD accredited Lab Forum covers industry’s most topical issues

At analytica Lab Africa’s CPD accredited Lab Forum, industry thought leaders captivated audiences with global trends insights, updates and discussions. The Laboratory Forum was presented by the Southern African Laboratory Diagnostics Association (SALDA) - a body representing multinational and local companies who distribute, supply and manufacture In Vitro Diagnostic tests, the African Society for Laboratory Medicine (ASLM) - a pan-African organisation committed to achieving a healthier Africa by increasing access to quality laboratory services for all, and the Society of Medical Laboratory Technology of South Africa (SMLTSA) - the industry body for South African medical laboratory professionals.

Sarah Cohen, Executive Officer of SALDA, and also a speaker at the event, noted: “A lot of lab professionals attended the Forum, and we’ve had many robust discussions. For us as an industry association, this has been very positive, and we hope to collaborate with the analytica Lab Africa team in future events.”

She added: “CPD points are critical for our industry in that all lab professionals need to be registered with the Health Professionals’ Council and need a minimum of 30 clinical and ethics CPD points per year. The Lab Forum with its esteemed speakers presented an opportunity for lab professionals to continue their professional development and earn CPD points at the event at no cost, so this was a major drawcard for all the laboratory professionals who attended.”

Among the topics the forum addressed were IVD and diagnostics, and laboratory and technology landscapes, Lab Strengthening Systems, a Digital Transformation Playbook, in-depth panel discussions focused on quality assurance

practices, training and competency, audits and accreditation, and funding and industry roles.

The presentations also explored topical issues such as pandemic preparedness, the continental regulatory process for certification or listing of priority in-vitro diagnostics (IVD), and partnerships and innovations for the laboratory industry and patient care, ethics, considerations for materials waste management, laboratory excellence, Cleanroom, and 3D Cell Culture.

Another highlight was the Lasec Pavilion Forum Stage, which featured three days of supplier presentations on the latest innovations, technologies, and solutions in the laboratory and scientific industry.

Unique opportunities for exhibitors

A broad range of exhibitors participatedincluding long-time supporters and many new brands. Among them were professional industry bodies SALDA - which hosted an SME pavilion, ASLM and SMLTSA, the South African Association of the Flavour & Fragrance Industry (SAAFFI), the South African Association for Food Science and Technology (SAAFoST), ChromSA, a division of the South African Chemical Institute, and the National Laboratory Institute South Africa (NLA).

On an extensive exhibition floor, leading brands including Anatech, Lasec (Silver Sponsor), Merck (Bronze Sponsor), Metrohm, Microsep and National Separations, Monitoring and Control, Sartorius, Shimadzu, Verder Scientific and Wirsam showcased and demonstrated their latest solutions.

The German industry association for Optics, Photonics, Analytical and Medical Technologies (Spectaris) showcased German excellence in analytical, biotechnology and laboratory technology at a German Pavilion at analytica Lab Africa.

Jennifer Goldenstede, Head of Foreign Trade and Export Promotion at Spectaris, said: “analytica Lab Africa presented a valuable opportunity to strengthen our presence in Southern Africa and gain deeper insights into this dynamic and rapidly evolving region. For us, the event is more than just a showcase - it is a strategic platform to explore new distribution channels, connect with both established dealers and potential end-

users, and to better understand the specific application fields that are driving demand in the region.”

Shimadzu, who celebrate their 150th anniversary this year, highlighted their precision instruments, measuring instruments and medical equipment. Darryl Harris, Executive Vice President at Shimadzu, said: “For us, coming to this event enables us to raise awareness of how long we have been in existence, and the quality of our products. It allowed us to catch up with existing customers and meet new prospective customers in an environment conducive for networking and doing business.”

Lasec, another long-standing industry giant which turns 80 this year, showcased groundbreaking innovations, including a Laboratory Information Management System (LIMS) partner, highlighting how AI-driven data management can enhance lab efficiency. Once considered exclusive to specialised labs, LIMS is now more accessible and essential for most laboratories. Visitors were able to experience a biotechnology-focused lab setup connected to a mock LIMS system.

Labotec, suppliers of laboratory equipment and analytical instruments to sub-Saharan Africa, marked its 65th anniversary by participating in analytica Lab Africa.

Dylan Groves, General Manager at Verder Scientific Africa, said: “analytica Lab Africa has been a fantastic experience for us. We’ve had an array of high-quality visitors asking the right questions from various industries and met our objectives in terms of customer reach. Our customers have been clear in terms of their needs, helping us to understand their challenges and share ideas, enabling us to solve their problems.”

The next analytica Lab Africa will take place in Johannesburg in July 2027.

GENERAL PRODUCTS

THYRACONT'S VD84 DIGITAL HANDHELD VACUUM GAUGE

Air & Vacuum Technologies is proud to be a direct importer and supplier of Thyracont's VD84 digital handheld vacuum gauge

Air & Vacuum Technologies is excited to introduce the Thyracont VD84 - a highperformance, handheld digital vacuum gauge that brings industry-leading measurement technology directly to your fingertips. As the official importer and supplier of Thyracont products in South Africa, we are proud to offer this compact yet powerful solution, designed for precision vacuum measurement across a wide range of applications, including laboratory, research, industrial service, and maintenance.

Thyracont has long been recognised as a leader in vacuum measurement and control. The VD84 exemplifies the brand’s commitment to innovation, delivering portable accuracy, digital efficiency, and unmatched reliability. Engineered in Germany to the highest

standards, the VD84 is trusted by professionals worldwide, including many major brands who rebrand Thyracont equipment as their own.

The VD84 handheld vacuum gauge is the ideal choice for anyone needing accurate, mobile vacuum measurement. Built with ease of use and rugged durability in mind, it provides fast, real-time readings in a user-friendly format. Here’s a look at what makes the VD84 an essential tool in today’s vacuum applications:

Advanced digital technology

The VD84 is equipped with state-of-the-art digital circuitry that ensures precise and consistent vacuum readings in real-time. Unlike traditional analogue gauges, it offers higher

CELEBRATING 40 YEARS

For over 40 years, Air & Vacuum Technologies has been a trusted partner in supplying highperformance laboratory and industrial equipment across Africa. Our solutions power critical environments - from cutting-edge research labs and production lines to mining operations and quality control facilities - where precision and reliability are non-negotiable.

We proudly supply a wide range of industryleading equipment, including:

• Endecotts test sieves & sieve shakers

• Peristaltic pumps for fluid transfer

Dosing & metering pumps

• ABSOLUTE BOS - RVD Series double-stage high-vacuum pumps

• Laboratory vacuum & chemically resistant vacuum pumps

• PRECISA moisture analysers

• Instrulab microbalances, precision & analytical balances

• Custom-designed systems: Freeze dryers, oil-free compressors and central vacuum installations

Workshop services that work as hard as you do Great equipment deserves expert care. That’s why our fully-equipped Midrand Workshop

Facility offers specialised servicing, repairs, and calibration - tailored for laboratory, industrial, and mining applications.

What we offer:

• Comprehensive service and repair capabilities

Calibration and performance verification

• Use of genuine manufacturer spare parts only

Custom SLAs & maintenance plans to reduce unexpected downtime

• Fast turnaround with knowledgeable technical support

Whether you're in manufacturing, research or mining, we’re here to help you extend equipment lifespan, prevent costly breakdowns, and keep performance on point.

accuracy and stability, eliminating errors caused by analogue drift or mechanical wear.

Portable and easy to use

Designed for mobility, the VD84 is compact, lightweight, and battery-operated - perfect for on-site service, troubleshooting, and temporary setups. Its handheld format makes it ideal for engineers, lab technicians, and field service teams who need fast and reliable vacuum data without bulky equipment.

Laboratory-grade precision

For laboratory environments, the VD84 offers precise vacuum measurement for a variety of applications, including analytical instrumentation, freeze drying, vacuum ovens, glove boxes, and more. It provides quick, repeatable readings essential for experimental accuracy and equipment validation.

• Wide measurement range

Depending on the connected sensor, the VD84 can measure from atmospheric pressure down to 1x10⁻⁴ mbar, covering both rough and fine vacuum ranges. This makes it suitable for multiple sectors, from general vacuum troubleshooting to highprecision laboratory applications.

• Real-time data & logging capability

Featuring a clear digital display with selectable units (mbar, Torr, Pascal), the VD84 allows users to view measurements in their preferred format. It also includes USB connectivity for data logging and PC analysis - making it a great fit for research, documentation, and system diagnostics.

• Interchangeable sensor options

The VD84 is compatible with Thyracont’s range of sensors, including Pirani, Piezo, and Cold Cathode, giving users the flexibility to adapt the gauge to different pressure ranges and environments. The easy plug-in system allows for quick sensor changes without recalibration.

Like all Thyracont instruments, the VD84 is built to endure demanding conditions. Its durable construction makes it suitable for industrial maintenance, production environments, and mobile service work, while still meeting the sensitive needs of research and lab setups.

When accurate vacuum measurement matters, the VD84 delivers. Whether you're testing a vacuum line, monitoring a lab process, or troubleshooting equipment in the field, the VD84 provides trustworthy data, easy handling, and long-term reliability.

At Air & Vacuum Technologies, we are dedicated to providing our customers with cutting-edge vacuum solutions that meet the highest standards of quality and performance. By offering Thyracont’s trusted range - including the VD84 - we help our clients increase efficiency, reduce downtime, and ensure precision in every vacuum application.

JHB:

CT:

KZN:

info@vactech.co.za

clientliaison@vactech.co.za

www.vactech.co.za

GENERAL PRODUCTS

GREEN CEMENT FOR A SUSTAINABLE WORLD

Green cement represents a revolutionary approach in the construction industry, focusing on sustainability and environmental responsibility. This innovative material is developed by incorporating recycled materials and utilising advanced techniques such as heat treatment, surface area analysis, grinding, and elemental analysis characterisation to determine the characteristics of these materials.

The production of green cement involves replacing traditional carbon-rich limestone with alternative materials like calcined clays, slags, manufactured sands, and fly ash. These materials not only reduce the carbon footprint but also enhance the properties of the cement. At Verder, we strive to support research and industrial laboratories to enable the progress in the production of innovative and sustainable materials.

Pore structure analysis of hardened cement

The construction industry is increasingly focused on sustainability, and one promising approach is the use of waste materials in cement production.

Hardened cement, as HCP, is a key component of concrete and can benefit significantly from the incorporation of various waste materials, both in terms of environmental impact and performance.

Hardened cement paste (HCP) is a porous, heterogeneous material mainly composed of Calcium Silicate Hydrates (C-S-H). Its properties and structure are influenced by moisture content, with pore size distribution being nonlinear and affected by relative humidity. Surface forces and capillary condensation play significant roles in HCP behaviour.

The BELPORE mercury porosimeters, available in three models (LP, MP, HP), measure pore diameters from 3.6 nanometers to 1 millimeter using the P.A.S.C.A.L. principle for optimised pressure control, enabling rapid, precise measurements with low running costs and comprehensive data analysis capabilities.

VERDER SCIENTIFIC SOUTH AFRICA Tel: 010 612 0141 sales@verder-scientific.co.za www.verder-scientific.com

EVA KARL FISCHER TITRATORS SIMPLIFY WATER CONTENT DETERMINATION

METTLER TOLEDO’s EVA volumetric Karl Fischer (KF) titrators offer a powerful combination of speed, precision and reliability for accurate water content determination. Capable of analysing a wide range of sample types, from simple liquids, soluble solids, to complex insoluble materials, they deliver exceptional performance. Ideal for industries such as pharmaceuticals, chemicals, and food and beverage, where accuracy and efficiency are critical, EVA KF titrators meet the highest standards of quality and reliability.

High reliability and efficiency

Equipped with cutting-edge technology and the advanced Fast Forecasting Amperometric (FFA™) Algorithm, EVA KF titrators ensure exceptional accuracy and reliability in water content analysis. The high-resolution dDrive unit enables precise titrant dispensing, while the rapid-response dSens M143 digital sensor accurately detects changes in water content, delivering consistent, precise results across a wide range of sample types.

Tailored solutions for diverse needs

Choose from two models to suit your application requirements:

• EVA V1 KF titrator: Optimised for rapid, precise water content determination in soluble samples, this model is ideal for routine testing with a focus on simplicity and efficiency

• EVA V3 KF Titrator: Designed for more versatile applications, this model easily handles challenging samples using homogeniser attachments and external sample extraction

Simplify your lab workflows with smart features

Designed with user convenience in mind, the intuitive OneClick™ interface simplifies daily tasks and workflows with guided operations, custom shortcuts, and PC-free operation. The Smart Reader function ensures error-free reagent data transfer for full traceability. Integration with LabX™ software supports compliance with ALCOA++ principles and regulatory standards, such as 21 CFR part 11, with enhanced user management, electronic signatures, and audit trails.

Enhanced performance with advanced accessories

Expand capabilities with specialised accessories,

including thermostable vessels, homogeniser adapters, and drying ovens, to tackle complex samples with ease. Customisable options, such as different burette sizes and extended terminal cables, add flexibility to your Karl Fischer process.

MICROSEP (PTY) LTD

Rudy Maliepaard

Tel: 087 092 7300

rudy.maliepaard@microsep.co.za www.microsep.co.za

LAUNCHING OF THERMO SCIENTIFIC™ ORION™ PRO STAR ELECTROCHEMISTRY BENCH METER SERIES

Revolutionary bench meters feature touchscreen displays, secure user access, and seamless cloud integration

The new Thermo Scientific™ Orion™ Pro Star electrochemistry bench meters are locally available from Labotec. Engineered for precision, efficiency and usability, the Orion Pro Star series sets a new benchmark in laboratory electrochemical analysis, and is ideal for applications across academic, environmental, industrial, and water-testing sectors. Designed with modern labs in mind, these advanced meters combine intuitive operation, powerful data management, and multi-parameter flexibility.

Key features of the Orion Pro Star series: 7” High-Resolution Colour Touchscreen – Ergonomic, anti-glare, glovecompatible display with customisable layouts

• Intuitive Onscreen Guidance – Setup wizard, calibration walkthroughs, and troubleshooting tools built in

• Robust Data Management – Store up to 20 calibration logs per parameter and 10 000 data sets with full GLP compliance

• Secure Multi-User Access – Optional secure mode with up to three administrator and 30 user accounts, with full audit trail

• Durable, Lab-Ready Construction –IP-54 rated ABS plastic housing with organised cable management and

freestanding electrode holder

Flexible Connectivity – Export data via USB, connect barcode scanners, keyboards, or mouse for streamlined workflow

A model for every application

Whether you’re focused on pH, conductivity, dissolved oxygen, or multi-parameter testing, the Orion Pro Star series includes eight specialised models to suit diverse needs:

• PH211 – pH/ORP Bench Meter

• EC212 – Conductivity Bench Meter DO213 – Dissolved Oxygen Bench Meter

• PI214 – pH/Ion Bench Meter PC215 – pH/Ion & Conductivity Bench Meter

• PD216 – pH/Ion & Dissolved Oxygen Bench Meter

• PI217 – Dual Channel pH/Ion Bench Meter

• MP218 – pH/Ion, Conductivity & Dissolved Oxygen Bench Meter

“The Orion Pro Star meters represent a significant leap forward in electrochemistry instrumentation,” says Charleen Tshabalala, Product Manager for Orion in South Africa at Labotec. “From secure user management to seamless data integration, these meters empower researchers and technicians to work smarter, not harder.”

BioLogic designs & manufactures high performance Research Potentiostat/Galvanostat, from Single Channel up to 16 Channel systems. EIS capabilities of 10µHz to 7µHz. Up to 13 Current ranges. From 1A to 800A with External Boosters & 150A with Internal Boosters.

BioLogic offers a variety of Domains and Applications namely:

Electrochemistry & Electrochemical Scanning Systems

Battery Testing & Fuel Cell Testing

Corrosion

Solar Cells & Photovoltaic Systems

Materials Testing

Surface Area Analysis

Super Capacitors

Nanotechnology

Rapid Kinetics

Sensor Development

www.sykam.com

SYKAM is The High Performance Ion Chromatography and Amino Acid Analyzer Specialist.

www.camag.com

CAMAG is The World Leader in HPTLC/TLC for more than 60 years.

Automation is available for Sample Application, Chromatogram Development, Derivatization and Chromatogram Evaluation.

CAMAG ATS4 - Fully Automatic Sample Application with unbeatable reproducibility for your daily TLC/HPTLC work.

www.kuhner.com

Kuhner is the World's most reliable Shaker/Shaking Incubator for more than 70 years with 5 years warranty.

www.advioninterchim.co m

Interchim Scientific offers CMS, TLC-MS, LC-MS,ICP-MS, (U)HPLC and Flash & Prep Purification.

PH INSTRUMENTATION

AMMONIUM

Fast and robust determination according to current ISO, EPA, and ASTM standards using direct measurement

Determination of ammonium is one of the most crucial applications for sectors such as water and waste-water analysis, fertilisers, and others. Metrohm Application Bulletin AB-133 describes the determination of ammonium by ion measurement according to ISO 6778, EPA 359.2, EPA 305.3, and ASTM D1426. Tips and tricks on how to deal with possible interferences, sample preparation, and handling of the ammonia ion selective electrode are also covered.

While there exist photometric methods for ammonium, they are rather time-consuming (up to 90 min. reaction time). Moreover, photometric determination in opaque solutions is always a challenge. Determination by direct measurement using an ion selective electrode,

on the other hand, is faster and more robust. Hence, measurements can be easily performed in waste-water, liquid fertiliser, and urine, as well as in soil extracts.

Determination of ammonia in ammonium salts, of the nitric acid content in nitrates, and of the nitrogen content of organic compounds with the ion-selective ammonia electrode is based on the principle that the ammonium ion is released as ammonia gas upon addition of excess caustic soda:

NH4+ + OH– → NH3 + H2O

The outer membrane of the electrode allows the ammonia to diffuse through. The change in the pH value of the inner electrolyte solution is monitored by a combined glass electrode. If the substance to be measured is not present in the form of an ammonium salt, it must first be converted into such a salt. To this end, organic nitrogen compounds, especially amino compounds, are digested according to Kjeldahl by heating with concentrated sulfuric acid. The carbon is oxidised to carbon dioxide in the process, while the organic nitrogen is transformed quantitatively into ammonium sulphate.

pH METERS FOR PEAK PERFORMANCE IN THE LAB

Microsep offers the advanced portfolio of METTLER TOLEDO pH meters and sensors for precise and reliable measurements across a wide range of electrochemical applications. Whether you are measuring pH, ORP, ion concentration, conductivity or dissolved oxygen (DO, BOD), these instruments deliver consistent performance in both complex and routine laboratory workflows.

High pH measurement performance

Automated pH analysis

Increase efficiency and measurement repeatability by connecting your benchtop pH meter with the InMotion™ autosampler. This integration boosts sample throughput while saving valuable bench space. Automating your workflow creates a flexible and efficient workflow, reduces manual handling and transcription errors, and improves overall data integrity.

Compliance and data security

NEW

THERMO SCIENTIFIC™ ORION™ PRO STAR METERS

The new Thermo Scientific™ Orion™ Pro Star electrochemistry bench meters feature touchscreen displays, secure user access, and seamless cloud integration. They are ideal for applications across academic, environmental, industrial, and water testing sectors. There are eight specialised models with multi-parameter flexibility to suit diverse needs, whether you're

METTLER TOLEDO focuses on delivering highquality benchtop meters, portable meters, and sensors combined with simple, intuitive operation and ergonomic design. This ensures optimal measurement performance for various applications. Additionally, certified calibration solutions for pH, conductivity, and ion concentration ensure reliable measurement results.

Simplify workflows with OneClick™

Productivity is maximised with the intuitive OneClick interface. Users can start an analysis with a single keypress, resulting in less errors and higher efficiency in the laboratory.

Security functions help support your workflow during calibration, data collection and data archiving. Built-in method creation ensures that analyses are performed with identical settings and parameters. LabX® software adds more functionality and compliance, such as data and resource management, and allows your benchtop pH meter to connect to other laboratory instruments.

ACCURATE pH MEASUREMENTS MADE EASY

The METTLER TOLEDO FiveEasy and FiveEasy Plus benchtop meters, along with compatible sensors and accessories, are designed to make everyday pH and conductivity measurements simple, reliable, and affordable. Whether you work in education, research, or industry, these compact instruments deliver precise results with minimal setup and training.

Benefits:

• Easy to use

• Space-saving and durable

• Reliable pH, mV, and conductivity readings RS232 connectivity for data transfer (Plus model)

• Ideal for education, research, QC, and more

Intuitive operation

Get started in just a few clicks. The user-friendly interface features a large, well-structured display and intuitive menu navigation - making operation quick and effortless for users at any level.

Compact design

Space-saving and robust. With a small footprint ideal for busy benchtops, FiveEasy meters include a built-in sensor holder for convenient storage. Their durable construction makes them suitable even for demanding lab environments.

Reliable, accurate results

Precision you can trust. Delivering consistently accurate pH, mV, or conductivity readings, the FiveEasy series supports confident decisionmaking in routine lab work.

Flexible data management

Streamline your documentation. The FiveEasy Plus model features RS232 connectivity for easy data transfer, enabling traceability and simplified record-keeping.

Versatile performance

Designed for a wide range of applications. Whether used in education, environmental testing, food and beverage analysis, or industrial quality control, the FiveEasy series delivers dependable performance without the unnecessary complexity - making it ideal for routine measurements.

Portable options available

Accurate results on the go. For fieldwork and mobile testing, the FiveGo portable meters offer IP67 protection, memory storage, and accurate measurement of pH, conductivity or dissolved oxygen.

SevenDirect pH Meter Straight to the Point

The versatile range of METTLER TOLEDO SevenDirect benchtop meters offer straightforward and accurate pH, Conductivity and Ion Concentration determinations.

• Precise measurements

• Reliable data management

• Improves productivity

Request More Info

Tel: + 27 87 092 7300 e-mail: info@microsep.co.za www.microsep.co.za

WATER PURIFICATION & TREATMENT

UPGRADED DIRECT PURE HIGH-PURITY LAB WATER SYSTEMS

Rephile’s newly enhanced Direct Pure laboratory water purification systems combine proven performance with smart, user-focused upgrades. Whether you are in a busy research facility or a small lab, Direct Pure systems offer the reliability you need - now with even greater convenience, efficiency, and sustainability.

Consistently high-quality water

The Direct Pure Series includes several modules, each engineered to deliver consistently reliable water quality. These systems produce both ultrapure water and RO water directly from tap water, with a production capacity of up to 45 litres of RO-purified water per hour. Each system includes modular components designed to ensure consistent, high-quality output for your most critical applications - from buffer and culture media preparation to solutions for chemical analyses. Features include a 10-litre integrated tank and remote dispensermaking it easy to customise the system to suit your lab.

Easy to use

Designed for simplicity, Direct Pure systems feature a plug-and-play setup with no tools or technical expertise required. The compact footprint allows flexible installation - under the bench, on the bench, or wall-mounted. A single dispensing handle and water-resistant touchscreen simplify operation. The highresolution colour display provides intuitive access to real-time water quality monitoring, manual or volumetric dispensing, adjustable flow rates, and system alerts.

Smarter process control

Daily operation is simplified with effortless dispensing, streamlined maintenance, and easy consumable management. Integrated monitoring across all purification modules helps ensure peak performance, consistent water quality, and early detection of potential issues.

Low running costs

High-efficiency purification cartridges help reduce operational expenses without

compromising performance.

Built-in safety features

Direct Pure does not just perform well - it is

BENEFITS OF A COD REACTOR AT

In wastewater analysis, COD (Chemical Oxygen Demand) is a crucial parameter for assessing organic pollution levels. To accurately measure COD, the sample must be digested using chemicals and high temperatures to completely oxidise organic compounds.

The HI839800 is a robust, 25-vial capacity thermoreactor for COD determination of industrial wastewater. The reactor has three stored and three programmable (custom) temperature programs.

Reduced digestion time:

• Traditional methods typically require 150°C for two hours, but Hanna digesters only need 170°C for 15 minutes, significantly saving time while ensuring complete oxidation. Additionally, this unit also has a built-in countdown timer. A timer of up to 180 minutes is included for applications that require timed digestions. The end of the digestion time is signalled by five short acoustic beeps and a ‘DONE’ message is displayed. The heating is turned off and the block begins to cool off

Enhanced organic matter decomposition: Higher temperatures accelerate the

built to protect your lab, too. Safety mechanisms - such as overflow sensors and automatic shutdown triggered by leak detection - offer added protection for busy lab environments.

Track data with confidence

All water-quality parameters and alarm data are automatically backed up for up to two years. All data can be exported and printed for traceability and compliance reporting.

Environmentally friendly

Direct Pure supports sustainability with a mercury-free 265nm germicidal UV lamp. The system is manufactured using renewable energy sources like solar power - minimising environmental impact.

170°C FOR 15 MINUTES

oxidation of organic compounds, especially those that are difficult to break down

• Ensures complete reaction, minimising errors in COD measurement

Energy and chemical savings:

• Shorter reaction times reduce electricity consumption, optimising operating costs Minimises chemical usage, ensuring economic efficiency and safety

Reduced risk of errors and contamination:

• Faster digestion reduces the risk of sample loss due to evaporation or contamination from the environment

• Higher repeatability ensures accurate and reliable COD analysis results

Additional features:

• Flexibility in supporting applications that require custom programs (time and temperature)

The included safety shield is highly recommended to use during vial digestion procedure to maintain a safe working environment.

Additional benefits:

• Outer casing stays cool to the touch

• Status indicator lights - power (on); hot (surface); heating (in progress) 25-vial capacity

ADVANCING WATER SAFETY WITH THE MBS-MULTIREADER SYSTEM

Ensuring microbiological safety in water is critical across industries, from food processing to healthcare. The MBS-MultiReader, in conjunction with MBS-HACCP and WATER Easy Test vials, offers a reliable, automated solution for detecting microbial contamination in water samples. This innovative system simplifies testing by combining incubation and colorimetric analysis into a single device, enabling results with exceptional sensitivity, down to 1 CFU/mL.

Designed for ease of use, the MBSMultiReader delivers accurate, fast results without the need for specialised laboratory infrastructure. It supports applications in water-treatment facilities, beverage production, agriculture, and cosmetics,

offering a powerful tool for quality control and regulatory compliance. Furthermore, the MBSMultireader device automates the analysis process, performing eight independent analyses simultaneously. The device stations are independent from each other; therefore, it is possible to perform different analyses at different temperatures (22°C, 30°C, 37°C or 44°C) at the same time.

The system is controlled by a computer with a specific software that can automatically detect the colour change of the vials and calculate, according to the time taken for the vials to change colour, the number of microorganisms in the sample.

With rising global concerns about waterborne pathogens and public health, this system represents a significant step forward in proactive monitoring and rapid response.

The MBS-MultiReader transforms microbial testing from a complex laboratory process into a streamlined, accessible, and dependable routine safeguard.

A Spectacular Showcase at Analytica Lab Africa 2025

We extend our gratitude to all our esteemed and loyal *CUSTOMERS* for your ongoing support, and for visiting our stand, during the 2025 Analytica Lab Africa Exhibition at Gallagher Convention Centre in JHB.

The exhibition was remarkable as always, as it allowed us to connect with both new and familiar faces.

Our NEWLY launched, HI6000 Multiparameter Modular Series, truly distinguished itself as a firm favourite among exhibition attendees, along with our HI931 & HI932 Automatic Potentiometric Titrators, and the HI802 Visible Spectrophotometer with Barcode Reader.

We are also exceptionally grateful to have had such a stunning booth in which to display our pristine analytical laboratory instruments!

Reds Advertising....Thank-you for building us such an epic stand !!

See you again in 2027 for the next Analytica Lab Africa exhibition!

ENVIRONMENTAL EQUIPMENT

BINDER KBF-S Series

The newly launched KBF-S ECO constant climate chamber delivers the high-quality standard of a Binder chamber and outstanding value for money. With low-noise performance that doesn’t need refrigerant, this is a truly high-end piece of equipment. This chamber has excellent energy efficiency while being environmentally friendly.

Benefits:

• Safe thanks to climatic homogeneity that far exceeds the accuracy required by ICH guidelines, even with a fully loaded unit

Reliable, thanks to failsafe operation without compromise. The interior and Longlife evaporator plate are made entirely from stainless steel

• Smart, as a wide range of accessories

makes it highly compatible for adaptation to specific customer requirements

• Economical, thanks to maximum effective volume that allows for 30% larger load compared to the competition

Main features:

• Temperature range: 0°C to +70°C

• Humidity range: 20% to 80% RH

• APT.line preheating chamber technology

Humidity regulation with capacitive humidity sensor and steam humidification

LCD to display temperature and humidity along with additional information and alarms

Internal data logger, measured values can be read out in open format via USB

• Unit self-test for comprehensive status analysis

• Inner chamber made completely of stainless steel

• Two stainless steel racks, incl. shelf supports

PROUD AGENT FOR PRECISA MOISTURE

ANALYSERS

Air & Vacuum Technologies is proud to be a distributor for Precisa moisture analysers

Precisa moisture analysers are the reliable and efficient solution for determining moisture content in powders and liquids. They are designed to meet the highest standards in research, production, and quality control.

Key features of the Precisa range:

• 100% Swiss quality: Crafted with precision and care, ensuring top-tier performance

• High-end balance technology: Built to the highest international standards Optimum resolution: For precise measurements, every time

• User-friendly interface: Menu-controlled touchscreen for simple operation

• Large viewing window: Easily monitor your samples during analysis Memory capabilities: Store up to 50 methods and 999 measurements, organised into batches

• ADAPTSTOP technology: Automatically detects when measurements are complete

• Password protection: Prevents unauthorised changes to settings and configurations

• GLP compliance: Anti-theft code printout to meet ‘Good Laboratory Practice’ guidelines

Benefits:

Fast and reliable analysis: Quickly determine moisture content using the thermogravimetric principle

High-resolution version (XM 60-HR): Ten times higher readability for weight and moisture calculation

• Achieve accurate results: Trust in Precisa for precise moisture analysis

Endecotts, for the finest range of particle size analysis sieve shakers and sieves. For all your laboratory shaker and sieve needs, please contact Air & Vacuum Technologies (Pty) Ltd for a quote.

Instrulab – a Division of Air & Vacuum Technologies (Pty) Ltd – are the sole agents for the Endecotts range of products for Southern Africa.

Pump

Vacuum Air Lab

CONTACT: bruce@madtech.co.za or +27828034484

• Voice command

• Xpress Start

• Auto Programming

• Run from 1-40 samples in 55ml,75ml and 1-24 x 110ml

• Plus many new features making digestion easy

•

•

ENVIRONMENTAL EQUIPMENT

CHOOSE THE RIGHT AIRBORNE PARTICLE COUNTER FOR YOUR CLEANROOM

Maintaining air purity in controlled environments is essential, and Airborne Particle Counters (APCs) are critical tools for contamination control in cleanrooms and similar settings. There are two main types: portable and fixed-point remote APCs - each suited to specific monitoring needs.

In partnership with Lighthouse Worldwide Solutions (LWS), we offer a complete portfolio of airborne particle counters designed to meet the demanding requirements of cleanroom and controlled environment monitoring.

Portable particle counters: Flexible and easy to use

Portable airborne particle counters are userfriendly mobile units that collect and analyse airborne particles on-site. They feature internal air sampling systems and can operate on battery or AC power, making them ideal for routine cleanroom checks and validations.

Portable airborne particle counters are differentiated by their airflow sample rates, which are reported in volume per minute in either Cubic Feet per Minute (CFM) or Litres per Minute (LPM).

The main types include:

Handheld units: Best for quick checks with low flow rates (≤0.1 CFM / 2.83 LPM)

• ApexZ3 standard flow units: The most widely used model for cleanroom monitoring (1.0 CFM / 28.3 LPM)

• ApexZ50 high flow units: Designed for rapid sampling and cleanroom certification (>1.0 CFM, up to 100 LPM)

Fixed-point remote particle countersContinuous, real-time monitoring:

Fixed-point remote airborne particle counters are smaller, more robust and less invasive than portable units. They can be installed directly on process equipment, cleanroom walls, or transport devices, making them ideal for continuous monitoring at critical control points where product integrity is at risk. They integrate easily with Building Management Systems (BMS), Facility Monitoring Systems (FMS), or Non-Viable Particle Monitoring Systems (NVPMS).

Models available:

• With built-in pumps: Standalone systems with internal sampling, ideal for facilities where no external vacuum system exists

• Without pumps: Compact and costeffective, these units rely on an external vacuum source and require less maintenance

Trusted performance

Whether portable or remote, Lighthouse airborne particle counters deliver superior

performance, data integrity, and compliance with global cleanroom standards. With a wide product portfolio, we are able to support your contamination control strategy - ensuring product safety, process reliability, and regulatory confidence.

PREPARING PLANT MATERIAL FOR ANALYSIS AT UNISA

To streamline workflows and support upcoming ISO accreditation, the College of Agricultural and Environmental Sciences at UNISA’s Florida campus has upgraded its former potting shed into a functional laboratory. As part of the upgrade, the lab acquired the robust Fritsch Pulverisette 19 Universal Cutting Mill, designed for grinding tough plant materials like bark into fine powder with greater precision. The new equipment, paired with a range of sieve sizes, allows them to grind material in stages - starting coarse and working down to a fine dust - ensuring durability and consistency.

Dr Garland More, Chief Laboratory Technologist and specialist in medicinal plant research, uses these finely ground samples to extract compounds for studies in antibiotics and other therapeutic applications.

“We extract compounds from plant powders using solvents like ethanol, hexane, or methanol, depending on the research,” he explains.

Current research includes anti-cancer studies using Hypoxis hemerocallidea (African potato) and Artemisia afra (African wormwood), which have shown strong antiviral and antidiabetic properties when synthesised into nanoparticles. “Some medicines can’t easily enter the body,” says Dr More. “Nanoparticles act as vehicles, carrying compounds into cells and the bloodstream, where they begin to work. We’re doing similar work with Moringa.” The research on medical plant metabolomics at UNISA’s College of Agricultural and Environmental Sciences has already positioned it as a hub for groundbreaking plant-based medicinal research.

Laboratory glassware washers for Africa.

Air & Vacuum Technologies has recently been appointed the SOLE distributor for the XPZ range of automatic laboratory glassware washers. XPZ has an intense focus on research & development & have achieved both the CE mark & also the ISO 9001 mark, producing a range of four outstanding glassware washers with excellent price to quality ratio.

• Moment series – benchtop style washer with a chamber volume of 126L.

• Glory series – Undercounted style washer with a chamber capacity of 170L.

• Aurora series – Freestanding style washer with a chamber size of up to 239L.

• Flash series – freestanding style washer with a chamber size of up to 345L.

They also offer one of the largest ranges of accessories for their washers.

Why use a laboratory glassware washer:

• Significant advantages over manual washing, include improved cleaning consistency, time savings, reduced risk of breakage and contamination, and enhanced safety for lab personnel.

• They also promote water and energy conservation and ensure compliance with regulatory standards.

• Laboratory glassware washers utilize controlled temperature, pressure, and detergent concentration, ensuring consistent and thorough cleaning, which is crucial for reliable experimental results.

• They can effectively remove a wider range of contaminants, including stubborn residues, than manual washing methods.

Time and Cost Savings:

• Automated cleaning frees up laboratory staff to focus on more critical tasks, improving overall workflow efficiency.

• Glassware washers can process a large volume of glassware in a shorter time than manual washing, leading to significant time savings.

• They often use water and detergent more efficiently, potentially reducing operational costs.

Water and Energy Conservation:

• Some laboratory glassware washers are designed with features like water recycling systems and energy-efficient cycles, minimizing water and energy consumption.

Improved Safety:

• By automating the cleaning process, glassware washers minimize direct contact with potentially hazardous chemicals or biohazards, reducing the risk of exposure for lab personnel.

• This is particularly important when dealing with volatile chemicals or infectious materials.

Typical laboratories using glassware washers:

• Biopharma & pharmaceutical laboratories.

• Food & beverage laboratories.

• Chemical laboratories.

• Petrochemical laboratories.

• Most departments within a university.

Enhanced Drying Capabilities:

• Our laboratory glassware washers include a drying cycle, which ensures glassware is thoroughly dried after cleaning, preventing water residue that could interfere with experiments.

FORENSIC TESTING/IT, SOFTWARE & LAB AUTOMATION

LC-MS SOLUTIONS DELIVER DATA YOU CAN TRUST IN FORENSIC LABS

Forensic analysis is a distinctive application in the realm of sciences. Its practice and presentation needs to align with the needs of both the scientific and the legal communities. Forensic and toxicology laboratories face challenges such as identifying seized drugs or new psychoactive substances, monitoring illicit drug use, analysing prohibited substances in sports doping investigations, and presenting reliable data in court.

Waters offers a comprehensive portfolio of solutions to meet the evolving needs of forensic and toxicology laboratories. This includes industry-leading liquid chromatography and mass spectrometry systems, data informatics, chemistries, automation tools, sample preparation products, and expert support services. Together, these solutions help laboratories generate accurate, reproducible, and defensible dataconsistently.

Definitive drug analysis with LC-MS/MS LC-MS/MS analysis saves time and costs by eliminating presumptive immunoassay analysis, enabling detection and quantification of all significant drugs present in the sample.

Waters LC-MS/MS systems and software enhance the detection and quantification of a wide variety of drugs and metabolites encountered in forensic laboratories for routine drug testing of urine and oral fluid samples. These systems also enable confident detection of highly potent fentanyl compounds at trace levels, in addition to more common drugs present in higher concentrations.

Forensic toxicology screening

Waters forensic toxicology solutions bring the power and versatility of high-resolution mass spectrometry and accurate mass to routine forensic workflows. With complete, integrated and proven solutions, forensic laboratories can

get the sensitivity, reproducibility, and ease of use needed to perform both targeted and nontargeted screening, as well as confirmatory techniques on complex biological samples. Waters solutions enable confident identification of both expected and unexpected compounds across routine testing, confirmation, and quantitation workflows.

Seized drug analysis

Accelerate the analysis of seized drugs and improve sample throughput with specific drug identification in real-time. The Waters’ RADIAN™ ASAP mass detector helps forensic drug chemistry laboratories streamline sample processing and deliver actionable results faster - combining selectivity, user-friendly operation, and speed.

METROHM JOINS THE WAR ON DRUGS

Metrohm BW Tek recently unveiled the new TacticID Mobile, its newest handheld 1064nm Raman for police and customs agents to identify illicit and hazardous substances where they find them.

The TacticID Mobile 1064nm Raman has an ergonomic design with a large touchscreen and display for even greater ease of use in identifying a range of samples, including impure, coloured street samples. It has a targeted library for rapid, actionable identification of pure and mixture samples in less than a minute. Reports, including threat level, location and sample photos, can be easily generated and shared on a USB drive or stored in a secure data management system. Relevant sample information inputs by the

user, together with up to three photos, give sample traceability and enhance the likelihood of successful prosecution. The system is designed for point-of-need identification with a rugged IP68 design. Interchangeable sample adaptors give the flexibility to measure samples as they are, or in translucent packaging, bottles, and disposable vials.

TRANSFORM YOUR LAB WORK WITH THE ANDREW+ PIPETTING ROBOT

Precision is essential in any laboratory, especially when handling valuable research samples. As laboratories adopt advanced technologies, automation is transforming workflows and enabling researchers to focus on discovery rather than routine tasks. Routine procedures such as pipetting can now be handled by intelligent systems, improving accuracy and efficiency.

Fully automated precision pipetting

The Waters Andrew+™ Pipetting Robot delivers fully automated liquid handling, from basic pipetting to complex sample preparation. Using smart electronic pipettes and labware holders called Dominos, Andrew+ ensures consistent, reliable results. By adding Device+, a growing portfolio of connected devices and tools for processes such as heating, shaking or labware transportation, Andrew+ becomes a powerful walk-away automation solution.

Accelerate pipetting workflows

With the capability of 8- and 12-channel pipettes, Andrew+ enables quicker dispensing of large liquid volumes and procedures simultaneously. It is ideal for workflows such as qPCR Prep (quantitative Polymerase Chain Reaction), Plasmid DNA Purification and NGS (Next Generation Sequencing) workflows, ensuring superior repeatability and full traceability.

A fully connected laboratory solution

Andrew+ is part of the OneLab ecosystem, executing laboratory protocols designed in OneLab software. This intuitive, cloud-based platform allows scientists to easily create, run, and monitor pipetting protocols without the need for any programming or robotics expertise. OneLab supports real-time experiment monitoring and provides a secure, flexible system built to meet regulatory requirements.

Enhanced sample processing

The Extraction+ Connected Device is one of several ‘connected devices’ for use with the Andrew+ Pipetting Robot. Controlled via OneLab software, the Extraction+ automates solid phase extraction (SPE) for biological,

food, forensic, and environmental samples. Its hands-free, automated approach eliminates the need for manual pipetting and sample extraction, potentially saving scientists up to four hours of bench time per sample set, and significantly reduces the risk of user-to-user variability.

Andrew+ empowers labs with greater precision, flexibility, and scalability. By automating pipetting and sample preparation, scientists can accelerate their workflows and focus on what matters most: advancing research and scientific discovery.

Advertise in the 2026 Buyers Guide

Book by 31 October 2026 and get your 30% discount and one free editorial in any issue of Analy tical Reporter!

To advertise, contact samantha.morgan@media24.com

Analytical Reporter is the premier laboratory equipment journal, and is recognised internationally

• It is the ideal vehicle for laboratory equipment suppliers to showcase their merchandise, with its regular coverage of the latest product information

• Complete with a comprehensive suppliers directory

• This database boasts a niche, targeted audience of requested subscribers

• Digital subscribers all receive our bi-monthly newsletter, which is linked to the digital version of Analytical Reporter

NEW 5L DYNADRIVE S.U.B.

Scalable performance from 1L up - redefining benchtop bioprocessing

In process development, the ability to scale efficiently without compromising performance is critical. The 5L Thermo Scientific™ DynaDrive™ Single-Use Bioreactor (S.U.B.) introduces a new standard by offering highperformance scalability starting at just 1L, setting it apart from traditional glass bioreactors.

Scalable from 1L: A game-changer for process development

With a 5:1 turndown ratio and a minimum working volume of 1L, the 5L DynaDrive S.U.B. enables flexible experimentation without vessel changes. Its design and film match those of the larger 500L and 5 000L DynaDrive S.U.B.s, delivering consistent mass transfer and mixing across scales. This uniformity simplifies process transfer, supports global standardisation, and accelerates time to production.

A cost-effective, eco-friendly solution

By removing the need for cleaning and sterilisation and supporting faster development cycles, the 5L DynaDrive S.U.B. offers both economic and environmental benefits. It reduces labour, water, and energy usage while

increasing throughput - aligning with the growing demand for sustainable bioprocessing solutions. Unlike glass bioreactors, the presterilised BioProcess Container (BPC) eliminates cleaning and sterilisation, reducing contamination risk and cutting workflow time by up to 20%. The result? Up to 27% more productivity and a lower environmental footprint.

Designed for high-performance cultures

Equipped with a proprietary drilled-hole sparger and advanced drivetrain, the system ensures efficient mass transfer, ideal for fed-batch and perfusion applications. Paired with Gibco media and supplements, it consistently supports highdensity cell cultures with improved viability and yield.

Easy-to-use, built to scale

With its front-loading BPC, aseptic connectors, and compact cubic design, the 5L DynaDrive S.U.B. is operator-friendly and space-efficient. Its similarity to larger DynaDrive units ensures easy scale-up, with larger models offering 10:1+ turndown ratios for smooth transition to commercial production.

INSTRULAB PERISTALTIC PUMPS

In life science laboratories where accuracy, sterility, and reproducibility are critical, Instrulab

YSI 2900

laboratory peristaltic pumps are engineered to deliver high-performance fluid handling for applications ranging from cell culture to pharmaceutical development.

1. Precision fluid handling for reliable results

Instrulab Peristaltic Pumps offer exceptional flow accuracy and repeatability, enabling scientists to achieve precise dosing of reagents, buffers, or media. This is especially crucial for experiments where even minor variations can affect outcomes, such as PCR setup, chromatography, or drug formulation.

2. Gentle transfer for sensitive samples

With a design that ensures no contact between the pump mechanism and the fluid, these pumps minimize shear stress and contamination risk - ideal for transporting live cells, proteins, or nucleic acids. By preserving sample integrity, they support reproducible and

BIOCHEMISTRY ANALYSER

YSI has earned a reputation as the bioanalytical Gold Standard, due to their highly accurate biosensor technology and ability to produce rapid results.

The key to generating analyte-specific results in 60 seconds or less is YSI’s innovative biosensor technology. Using the inherent specificity of enzymes for a single target analyte, YSI’s proprietary immobilised enzyme electrodes allow a rapid, accurate, and largely interference-free measurement to be made in about a minute.

The unique fluidics and chamber design resist clogging – even at high cell densities.

Combining trusted measurement technology with the latest in automated sample handling, the YSI 2900 furthers YSI’s legacy of expertise in the following applications:

• Bioprocess monitoring and control

• Food & beverage processing and QC

Biofuel production and research

• Medical and sports physiology research

Key keatures:

• Icon-driven user interface with touchscreen

Data download options

• Onboard training videos

Conclusion: one platform, from lab to launch

The 5L DynaDrive S.U.B. delivers scalable, efficient, and consistent performance starting at 1 L - empowering teams to move faster and smarter from process development to production. It’s a future-ready solution for biologics, cell therapies, and more.

The new 5L Dyna Drive is part of the existing range, just a new size.

high-quality experimental results.

3. Self-priming and dry-running capabilities

Instrulab pumps are self-priming and capable of dry running without damage, simplifying workflow and improving reliability for continuous or unattended operations. This makes them especially useful in automated or long-duration protocols.

4. Low maintenance and operational efficiency

Their modular, user-friendly design allows for quick tubing replacement and minimal downtime. For busy laboratories, this translates to lower maintenance costs and increased productivity—crucial for high-throughput screening or routine diagnostics.

5. Versatile applications in life sciences

Instrulab Peristaltic Pumps are suitable across a range of life science tasks, including: Media and Buffer Delivery: For cell culture and bioprocessing

• Precise Dosing in ELISA and Assay Development: Ensuring consistency in

analytical procedures

Sterile Filtration and Chromatography: Providing controlled flow in purification workflows

• Sample Handling in Molecular Biology: Gentle enough for DNA/RNA solutions or enzyme preparations

• Pharmaceutical Research: Supporting formulation and scale-up in drug development pipelines

6. Compact and intuitive for lab environments

Designed with space-limited labs in mind, these pumps are compact, quiet, and easy to operate, with digital interfaces that allow precise control overflow parameters.

Multiple sample processing options

• Proprietary enzyme electrode

• Short, wide aspiration path with proprietary chamber measurement system

• Uses biological separation technology

• Slim modular design

• Connect with OPC, ethernet, USB, RS232 to computer or other instruments and systems

• Results automatically saved in searchable database

• 21 CFR, Part 11 compliant

ACCELERATE LIFE SCIENCE WORKFLOWS WITH UV/VIS

Enhance the efficiency and accuracy of your life science research with METTLER TOLEDO's Excellence UV/VIS spectrophotometers, designed for fast, reliable and precise spectroscopic analysis of biomolecules and other critical substances.

FastTrack™ technology

Excellence UV/VIS Spectrophotometers feature innovative FastTrack technology and a long-lasting xenon lamp for rapid, dependable measurements. LockPath™ technology helps prevent sample evaporation and enables accurate analysis across a broad concentration range.

Compact and fast

With a small footprint and no required warm-up time, these instruments are ready for immediate use. Full-spectrum scans take just one second, accelerating data collection. The intuitive One Click™ touchscreen interface simplifies operation, with convenient shortcuts for seamless integration into lab workflows.

Micro-volume and cuvette measurements with UV5Nano

The UV5Nano spectrophotometer offers a powerful, compact solution for both full-

spectrum micro-volume and standard cuvette measurements. Ideal for life science and biopharma labs, it enables concentration and purity determination of nucleic acids and protein samples using as little as 1μL of sample. Dual-pathlength capability allows measurements across a wide concentration range without the need for additional dilutions.

Dedicated cuvette measurements with

UV5Bio

The compact UV5Bio is designed specifically for standard cuvette measurements in life science applications, making it ideal for analysing biological samples or performing temperature studies. The user-friendly touchscreen and onecentimeter cuvette holder ensure easy sample handling.

The open sample area facilitates the convenient placement of cuvette holders and the CuvetteChanger.

Accessories are available for temperature-controlled kinetic experiments, lipase activity, protein denaturation and melting point.

Pre-defined applications for biomolecule analysis

Excellence spectrophotometers include predefined applications for biomolecule analysis. Researchers can easily assess nucleic acid purity and concentration, including dsDNA, ssDNA, or RNA. For protein analysis, direct determination at 280 nm or indirect determination with dyes, alongside commonly used assays like Lowry, Bradford, Biuret, or BCA protocols are supported.

Easy integration with LabX software

Researchers can enjoy flexible operation of a standalone instrument or integrate with LabX® software to ensure data integrity. LabX® enables the building of multiparameter systems by connecting to other METTLER TOLEDO instruments, allowing for more comprehensive analyses, streamlined data management and overall laboratory efficiency.

Liquid Handling Solutions

• Ergonomic Pipettes

• Pipette Tips and Racks

• Pipette Management and Calibration

• Automated Pipetting Systems

LIFE SCIENCES

OFFICIAL DISTRIBUTOR FOR PARTICLE METRIX

Labotec is proud to announce our new partnership with Particle Metrix, a global leader in nanoparticle characterisation technologies for extracellular vesicles, viruses, nanomedicine, or materials science.

As the official distributor for Southern Africa, we are excited to offer their cuttingedge solutions to researchers across the region.

First Zetaview® installation

“We are especially grateful for the outstanding support provided by Labotec during the first installation of the Particle Metrix ZetaView® system in South Africa,” says Rosa Jerlerud, International Sales Manager at Particle Metrix. “The installation took place at the Microscopy and Microanalysis Unit of the University of KwaZulu-Natal (UKZN).”

During the setup, the ZetaView® system was used to measure extracellular vesicles (EVs) and nanometals. The department is currently engaged in research involving various

types of bio-nanoparticles, including plantbased, human-derived, and bacteriaderived EVs. With the ZetaView® now in place, it is accessible to a wide range of researchers, postdoctoral fellows, and PhD students at UKZN.

LABOTEC (PTY) LTD

JHB: (011) 315 5434

CPT: (021) 531 7660

DBN: (031) 566 4870

sales@labotec.co.za www.labotec.co.za

GET READY TO MEET THE NEWEST MEMBER OF THE MYRA FAMILY - MYRA9

We are excited to announce the release of Myra9, which arrived July 1, 2025.

Myra9 builds on everything you love about the original Myra - compact design, high speed, and intelligent automation - with three extra deck positions to give you more flexibility for larger and more complex liquid handling protocols.

Despite the expanded capacity, Myra9 keeps the same small footprint and blazingfast performance, completing 384-well plate setups in under 25 minutes using a multichannel head. It supports 384-tip racks, giving you more usable deck space compared to traditional 96-tip robots. That means fewer compromises and more possibilities.

Myra9 runs on the same intuitive Workbench software and is powered by MyraIntelligence®, our AI-driven system combining MyraSim, MyraVision®, and MyraSense. And with interchangeable pipette heads, including multi-channel and submicroliter options (coming soon), you can tailor the system to your exact application needs.

Whether you’re scaling up your qPCR workflows, streamlining NGS prep, or pushing the boundaries of your assay design, Myra9 is built to grow with you. We can’t wait for you to see what it can do for you.

INQABA BIOTECHNICAL INDUSTRIES (PTY) LTD

SOUTH AFRICA-HQ

Tel: +27 12 343 5829

katleho.radebe@inqababiotec.co.za www.inqababiotec.co.za

Tel: + 27 87 092 7300

e-mail: sales@natsep.co.za www.natsep.co.za

A Century of Microscopy

• Stereo Microscopes

• Upright Microscopes

• Inverted Microscopes

• Confocal Microscopes

• Super-Resolution Microscopes

• Fluorescence Microscopes

• Polarising Microscopes

LIFE SCIENCES/ COMPANY LISTINGS

INSTRULAB SUPER SONIC ULTRASONIC BATH SERIES

The Instrulab Super Sonic Ultrasonic Bath Series is an advanced, high-performance cleaning solution designed to deliver exceptional results across a wide range of industries. Whether used for laboratory research, industrial maintenance, or precision component cleaning, this ultrasonic cleaner ensures efficient, reliable, and deep cleaning — even for the most intricate and challenging parts.

Ultrasonic baths use high-frequency sound waves to agitate a cleaning solution, creating microscopic bubbles that remove contaminants from surfaces. This method, known as cavitation, is highly effective for cleaning delicate or complex components that would be difficult to clean using traditional methods. The ultrasonic cleaning process ensures thorough cleaning without physical contact, reducing the risk of damage to sensitive parts.

Key features include:

Degassing Function: Removes dissolved gases from solvents, which enhances cleaning efficiency by improving cavitation, ensuring more effective cleaning of complex or delicate items

• Industrial-Level Transducer: Equipped with a high-quality, industrial-grade transducer that guarantees durability, optimal performance, and uniform cavitation for demanding applicationsranging from electronics to automotive parts

• Lower Frequency (35 kHz): Ideal for cleaning larger surfaces and breaking down tougher stains, while maintaining the integrity of sensitive components. The lower frequency produces larger bubbles that effectively dislodge stubborn dirt and residues

Stainless Steel Construction: The SS304 tank offers durability and resistance to corrosion, making it easy to maintain and clean while providing a longlasting solution for demanding environments

International Certification: CE certified, ensuring the highest standards of quality and safety. Backed by a oneyear warranty, offering peace of mind and reliable after-sales support

Versatile applications:

• Solvent Degassing: Essential for applications like HPLC (HighPerformance Liquid Chromatography), where removing gases from mobile phases ensures cleaner, more accurate, and reliable results

Component Cleaning: Ideal for cleaning PCBs (printed circuit boards), electronics, and mechanical parts that require precise and gentle cleaning without causing damage

• Lab Equipment: Perfect for cleaning delicate laboratory instruments, such

as cuvettes, glassware, optical lenses, and medical tools, ensuring thorough removal of contaminants without risk of corrosion or abrasion

• Tough Stains & Residue Removal: Capable of removing a wide variety of contaminants, including oils, grease, dust, corrosion, and biological residues from both small and large parts

The Instrulab Super Sonic Ultrasonic Bath Series offers the following benefits:

1. Thorough Cleaning: The ultrasonic cleaning process is far more effective than manual scrubbing or traditional cleaning methods. It reaches hard-toaccess areas, ensuring complete cleaning without causing damage to the components

2. Time Efficiency: With ultrasonic baths,

cleaning times are significantly reduced compared to manual cleaning, which helps improve laboratory or production line efficiency

3. Gentle on Delicate Components: Since ultrasonic cleaning uses sound waves instead of abrasive methods, it is gentler on fragile components like optical lenses or precision medical tools

4. Environmentally Friendly: By reducing the need for harsh chemicals and solvents, ultrasonic cleaning is an ecofriendlier option, promoting sustainability in your cleaning processes

5. Increased Equipment Longevity: Regular ultrasonic cleaning helps extend the life of your equipment and tools by preventing the build-up of harmful residues that could lead to wear and tear over time

The Instrulab Super Sonic Ultrasonic Bath Series is engineered to meet the highest standards of performance, durability, and precision. Whether you're cleaning sensitive laboratory equipment, industrial parts, or complex components, this ultrasonic cleaner offers the ultimate cleaning solution for industries and laboratories worldwide.

Leading supplier of laboratory and scientific analytical equipment throughout Africa. NIR Analysers, Nutrient Analysers, Discrete Analysers, Elemental Analysers, Rheological Analysers, Texture Analysers, Combustion Analysers, TOC Analysers, Kjeldahl/Dumas Analysers, Automated Analysers, Robotics Analysers, Imaging Systems, Hyperspectral Systems, Extraction and Digestion Systems and Solid Phase Extraction (SPE).

Tel: +27 12 940 5921

Email: Sales@aelab.co.za

Website: www.aesol.co.za

INSTRULAB a division of Air & Vacuum Technologies (Pty) Ltd

JHB: +27 (0)11 318 3241/2/3/4

CT: 069 872 7528

KZN: 069 872 7528 info@vactech.co.za clientliaison@vactech.co.za www.vactech.co.za

and Lab Products Africa (Pty) Ltd

Tel: +27 83 626 5742 +27 64 870 5046 Email: sales@alpa.bz Website: www.airlabproducts.com

Bruker South Africa (Pty) Ltd

Telephone: +27 (0)11 463 6040

Fax: +27 (0)11 463 6289

info.za@bruker.com Web: www.bruker.com

A-A001-G

• Advion - Compact & affordable High Performance Mass Spectrometer using Atmospheric Solid Analysis Probe, Open Port Sampling Interface and Gas Phase Sample Analysis. Other instrumentation includes Plate Express (TLC interface), (U)HPLC, ICP-MS and Chip-Based Electrospray Ionization

• Interchim – Formidable instrumentation for Preparative Liquid Chromatography, Ultra performance Flash Purification, Purification of Proteins and Peptides, Process Purification and Protein Analysis.

• Bio-Logic - High performance instrumentation for the Research Lab, Electrochemistry, Potentiostat/Galvanostat, Corrosion, Battery & Fuel Cell Testing, Super Capacitors, Sensor Development, Nanotechnology, Material Testing, Solar Cells & Photovoltaic Systems, Electro-chemical Scanning Systems, Spectroscopy & Photosynthesis and Rapid Kinetics.

• CAMAG – World’s Leader in Thin Layer Chromatography supporting TLC, HPTLC, HPTLC PRO and Dried Blood Spot Sampling.

• Kuhner - World’s most reliable Shaker/Shaking Incubator (from 2g up to 2tons) for more than 60 years with 5 years warranty Tel: (011) 804 3503 Fax: 086 719 2778 Mobile: 078 342 3354

E-mail: bruno@bslc.co.za Web: www.bslc.co.za

(0)87 610 0900

Fax: +27 (0)86 244 9524

E-mail: info@analyticalsolutions.co.za www.analyticalsolutions.co.za

• Chembiz is a supplier of high quality laboratory instrumentation.

• Supplier of Ohaus balances, scales and moisture analysers.

• Ohaus pH, Conductivity, electrochemistry products.

• Ohaus Centrifuges, Micropipettes, Shakers, Vortex mixers.

• Ohaus precision mass calibration weights.

• General laboratory equipment

48 Bryntirrold Drive P.O. Box 67 Northriding 2162 Johannesburg – Head office

Tel: +27 (0)11 465 6390 Fax: 086 689 5366

Mobile: 0763638115

Email: ivan@chembizlab.co.za

Cape Town

Cape Town mobile: 082 897 4054

Cape Town E-mail: chembizct@mweb.co.za Website: www.chembizlab.co.za

COMPANY LISTINGS

Davies Diagnostics (Pty) Ltd

We offer EXTRAordinary service to all laboratories. Our staff is technically qualified to offer full technical support of all our products.

Our product range covers microbiology, haematology, virology, immunology, serology, blood transfusion, molecular biology, immunohistochemistry and general laboratory products.

PO Box 3222

Randburg 2125

Tel: +27 11 777 7600

Fax: +27 11 787 6917

Email: mkt@daviesdiag.co.za www.daviesdiagnostics.co.za

Your accredited service provider for: - Calibration - Validation & Qualification - Technical Inspection

ISO/IEC 17025:2017

Official agent for: www.labcalsolutions.com

T: +27 11 466 4145 E: admin@labcal.co.za

We provide innovative technology for your most challenging samples, including instruments for analytical, separation, and metallographic science as well as complete line of consumable products.

Tel: +27 11 974 1681

Fax: +27 11 974 1848

Cell: +27 82 771 7083 www.lecoafrica.co.za

Head office Tel: 011 615 6076

Durban Tel: 031 701 2711

Cape Town Tel: 021 946 1722

Eastern Cape Tel: 041 450 5685

Export: +27 (0)72 910 5749

Website: www.hanna.co.za

E-mail: hanna@hanna.co.za

Your solution provider of certified and analytical reference materials, pharmaceutical impurity - and drug standards, biological standards, profieciency testing schemes and Fusion Equipment

Tel: (011) 466 4321 sales.za@lgcgroup.com www.lgcstandards.com

Labotec is your guarantee of WORLD CLASS LAB EQUIPMENT with South African based after-sales service and support

Tel: +27 11 315 5434

Fax: +27 11 315 5882 sales@labotec.co.za www.labotec.co.za

Email: info.laf@liebherr.com

Web: www.liebherr.com

YOUR TRUSTED PARTNER

PROVIDING WINNING SCIENCE, TECHNOLOGY, HEALTH AND EDUCATION SOLUTIONS ACROSS AFRICA

Our extensive sourcing network and long-term partnerships with leading international manufacturers means you can get the highest quality product at the most competitive price.

agents for: CEM Microwave and Teledyne Cetac Technologies Radom MICAP-OES

M.A.D TECHNOLOGY (PTY) LTD

Tel: +27 11 797 3660

Fax: +27 11 797 3670

Cell: +27 82 803 4484 bruce@madtech.co.za www.madtech.co.za

Microsep distributes and supports market-leading brands in southern Africa and sub-Saharan Africa. We offer the sale and support of technologically advanced scientific and analytical instrumentation, laboratory and industrial weighing equipment. Our focus is to provide high quality products and innovative solutions to satisfy the needs of our customers in the general laboratory, pharmaceutical, biotechnology, food and beverage, chemical and petro-chemical, environmental and industrial markets. Industry leading brands include Waters and Mettler Toledo.

Johannesburg | Cape Town | Durban | Gqeberha Tel. 087 092 7300

Email: info@microsep.co.za www.microsep.co.za

2 Saturn Crescent, Linbro Business Park Frankenwald Ext. 30 Sandton, 2090

We are a BBBEE subsidiary of Metrohm-AG. Our market-leading products are produced in Switzerland and other European countries thereby guaranteeing you the highest accuracy and reliability. We supply lab and on-line process monitoring analysers for:

pH, conductivity, dissolved oxygen, Titration / Karl Fischer, Ion chromatography, Electrochemistry, Raman and NIR spectroscopy. Milestone: microwave sample preparation, acid purification systems and direct mercury analysers.

Gauteng: 011 656 1918

Kwazulu Natal: 031 265 0067

Western Cape: 021 852 0213 E-mail: info@metrohm.co.za www.metrohm.com/en_za

National Separations (NATSEP) partners with global leading biotechnology and diagnostic companies to provide general laboratory equipment, lab and process filtration technologies, water purification systems, rapid microbiological and contamination monitoring products in southern Africa and sub-Saharan Africa. Market leading product brands include Amazon Filters, Hygiena Diagnostics, Rephile BioScience, Saint-Gobain and Avantor Bioprocess for all industries. Sartorius products for the Food and Beverage market.

Johannesburg | Cape Town | Durban | Gqeberha Tel. +27 87 092 7300

Email: sales@natsep.co.za www.natsep.co.za

Gas generator solutions

With multiple flow rate models of nitrogen, hydrogen and zero air laboratory gas generators, Peak Scientific has the ideal gas solution for LC-MS, GC & GC-MS instruments, even up to an entire laboratory’s gas supply.

Streamline your workflow with a cost e ective, reliable, eco-friendly and safe alternative to gas bottles.

Contact us: +27 (0) 21 851 6542 peakafrica@peakscientific.com www.peakscientific.com

SSS is a highly specialised company dedicated to offering superior support in niche markets in Chromatography and related disciplines. SSS is an OEM distributor for Vici and an accredited distributor for all Varian consumables; Vici Valves and GC Detectors; Precision Sampling Syringes; ChromPerfect Data Systems; Hamilton Syringes; SGE Syringes & Supplies; National Scientific Vials, Septa, Syringe Filters, Caps etc; Bohlender Teflon Products; GL Science Leak Detectors; Specialised and Refurbished Instruments; Capillary Columns; Solid Phase Extraction; Nikepal Syringes. Training is a priority at SSS and regular hands-on courses are offered. The range is expanding annually and SSS also manufactures specialised Inlet Systems for sample introduction of

To advertise contact us at advertise@b2bcentral.co.za or tel: +27 (0)11 877 6111

UP-TO-DATE INDUSTRY NEWS

Stay ahead of the curve with the latest industry news & insights, or have it delivered to your inbox to read later.

Read digital issues from all our B2B titles on your PC, smart phone or tablet. PDF downloads also available.

Remove geographical barriers and expand on your expertise with knowledge-sharing webinars across a variety of topics.

You can create a free profi le on www.b2bcentral.co.za/register to gain access to all of this and much more.