Lofts
1.2
1.3
{150,75,150} {150,0,150}
{150,150,150}
{25,0,150}
Key
1.4
{0,0,0}
{25,150,0} {150,0,150}
{0,75,150}
{0,150,150}
{151,150,-1}
{0,150,100}
{0,150,150}
{150,150,50} {150,150,150}
{150,0,150} {150,0,0}
{150,0,50}
{150,150,50} {150,150,125} {0,125,150}
{0,100,0}
{150,150,150}
{0,100,0}
{151,150,-1}
{125,0,150}
{100,150,0}
{150,75,0}
{0,0,0}
{151,23,4}
{150,75,150}
{0,100,0}
{0,0,150}
{150,0,100} {0,150,150}
{Index Selection}
{Index Selection}
2.1
2.2
{25,145,296}
{Index Selection}
{Index Selection}
2.3
2.4 {77,-29,190}
{93,121,207}
{131,-56,196}
{99,165,173} {148,-42,195} {226,208,161} {-12,181,130}
{20,3,8} {-56,218,-2} {-17,119,-84}
{Curve Attractor }
{Curve Attractor}
{Point Attractor}
3.1
3.2
3.3
3.4
Paneling
Miao Juan Toh - 917893
{152,-49,8}
{Point Attractor}
+
{Weaverbird}
+ {Weaverbird}
Design Matrix 1:5
The waffle structure is built with a bigger gap here to suggest a main point of entry. The most amount of light passing through the hollow waffle structure comes from this side.
Variation of 3D and 2D panels allowing different penetrations of light through the structure.
Hollow side of the 3D panel
The direction of the 3D panels are attracted in a specific direction. They are designed to let light pass through on one side of the structure and ot the other.
Hollow side of the 3D panel
Even though the waffle structure is built with a smaller gap here, the hollow cut-outs of the 3D panel surface gives a sense of openness on this side as well.
Exploded Axonometric 1:1 0
20
60mm
Attractor / Control Points (X,Y,Z) Attractor / Control Curves Grid Points
{150,150,0}
{151,23,4}
{150,50,150}
Paneling Grid & Attractor Point
Module 02 - Task 01
1.1
Grid Manipulation Object Distribution
Module 02 - Task 02
1.1
1.2
1.3
1.4
Key {0,0,0}
Attractor / Control Points (X,Y,Z) Attractor / Control Curves Grid Points
{Point Attractors}
{Curve Attractor}
{Random Attractor}
{Gaussian Curvature}
2.1
2.2
2.3
2.4
{115,-56,173}
{27,-127,150}
{34,199,16}
Object Transformation
Miao Juan Toh - 917893
{133,255,134}
{Point Attractor}
{Curve Attractor}
{Random Attractor}
{Gaussian Curvature}
3.1
3.2
3.3
3.4
{68,72,65}
{25,197,0}
{Reverse Attractor}
{Point Attractor}
{Point Attractor}
{Reverse Attractor}
Design Matrix 1:5
This boolean structure is carved with the use of 2 donuts combined together.
Leveled interior spaces are created, could be used as comfortable gathering space.
The intersecting geometry creates a spiral tunnel down this structure.
Certain areas of the section created private pockets of space.
Where the box is sectioned, it creates interesting openings above base level. This provide a variation of viewing point around the structure
One point of entry from base level
Axonometric 1:1 Solid boolean using 3.2 morph itteration. 0
20
60mm