PT5935
Hålstansverktyg för backvarnarsensorer, 8 delar Specifications • Punch Tools: 7 Pcs (17, 18, 19, 20, 21, 22, 32mm) • 5/16 Drill Bit: 1 Pc
Instructions
Remove the bumper off the car.
4
7
2
5
After the bumper is cut, remove the tool and discard the plastic parts inside.
Drill a hole using an 8mm drill on the place where you want to position the sensor. And use the hole to guide the M8 screw in.
3
6
Remove the screw from the tool. Install both parts on the opposite side of the bumper and put back the screw.
The same operation can be done with a simple battery powered screwdriver.
www.promeister.com
1
143